transform a selection in Photoshop

Similar Questions

• Hide selection in Photoshop CC?

  Where the option to hide the selection in Photoshop CC. I don't see anywhere?

  View > Extras or Ctrl H

• How to load the contents of a layer as a selection in photoshop CS4

  Hello

  In photoshop cs4 when I ctrl-click on a layer thumbnail in the layers panel, photoshop select any layer not its content.  How to load the contents of a layer as a selection in photoshop cs4?

  Thank you

  to load the contents of the layer as a selection, you go to the Panel layers and Ctrl + click on the RGB.

• Selecting and keeping the following frames selected in Photoshop during the animation

  I want to add a star that moves with the hand of actors in a video. I have imported the video (10 total number of frames) and add the first image of the star and positioned where I want.  I know I need to move in the following picture to follow the hand of the actors in the second picture and so on. I also know that I can choose the 2nd Mount for the last image and move my new spread across these frameworks, so I cannot move the object of the first image positions - only from the second image (repositioning). My question is, there a shortcut or a way I can have say 2-10 frames selected, move the object, and then go to frame 3 without losing the following frames to be selected? It's a pain to have to select again the following frames.

  You can use Photoshop Tween option to have Photoshop images between images, but you want the star to cross existing frames. You may be able to use tween to generate the star moving images then add the hand moving layers in the frames where the layers of hand are lower in the stack of layers. that the mobile star layer. Photoshop would have no problem generating flames stars 10, that you need.  You know where the hands are in the context of the first and the last.

  I create the gif of 150 images by using two layers.  I create the first and the last images and Photoshop generates 148 frames between them by using the interpolation option.  The first image I create I move the JJMack layer 1 content up and off the power of the Web on the left. Note: Laye 1A a layer not coupled hide the mask layer 0 clouds so that he can prove through JJmack. The last image, I create, I moved the content layer JJmack 1 low and canvas to the right. Photoshop generated interpolation of 148 frames them.

  

  

• Have you seen laboratory of selection in Photoshop 2015.5!

  In Photoshop CC 2015.5 If you have no. open Document, the "Select and mask ' who was previously (refine edge) is called

  LABORATORY SELECTION!

  

  It seems to Me that adobe has something in mind in future versions of Photoshop to make all the choices process here.

  and (select and mask) will be renamed to the laboratory of the SELECTION which way do more and I hope to improve the outline will come again somewhere.

  What do you think?

  Hi Mohammad.Harb,

  Thanks for reporting this. We are able to reproduce this on our end.

  Suggest you for this report as a bug on Photoshop community customer family

  Concerning

  Claes

• Movement and transformation of selected art

  I scanned a painting in watercolor. The paint has 5 different pieces of art I want to be able to use separately in a new work of art. Corner of bouquets of flowers, for example.

  I make my selection with the lasso tool, then bring it in my new document, so I have my new document with one of the pieces of art on it as a new layer.

  The problem I have is and then selecting this work of art to transform, rotate, resize etc. I tried to convert it to a smart object, but it doesn't seem to work. If someone wants to be able to provide instructions on how to isolate a section of a scanned image and then use freely in itself that would be so useful!

  I also applied a mask to the layer of works of art to make the background transparent.

  Any help would be appreciated!

  Make sure that the layer in the new document is not a background layer. (the layer will say at bottom with a side lock)

  If you can drag the lock to the trash, you can to convert it to a normal layer. Then transparency, layer styles, etc. will work.

  If this isn't the case, please enter your entire screen with layers panel open and everything collapsed expanded.

• Three sliders that appear in the tool of selection of Photoshop 11 on Windows 10.

  I have a new computer with Windows 10. In Photoshop 11, there are three sliders that appear in the selection tool. There is nothing online about this. Any ideas?

  
  Thank you.

  I found the solution. It's the same problem as previous versions of Windows, when the display settings are at 150%.

  The Windows 10 solution is to go to advanced display settings and change the custom scale factor. There is an area to the top of this window, where you can manually type in 149%, 151%. It is necessary to log out or restart before you see the correction in Photoshop.

• Problem to copy a selection after Photoshop light effect

  After application of the Photoshop filter lighting effect it was not possible to use the "Select all" command or copy a selection. After resetting the preferences and disabling of all external plug-ins it has not solved the problem. After saving the image and Photoshop is restarted, the commands are working properly again. I use Photoshop CC 2015 on a Mac (Yosemity 10.10.5)

  Problem is solved after the most recent installation updates Photoshop 2015CC

• Screen flashes when the selection in Photoshop CC tool

  Does anyone know why my Windows PC screen flashing when I try to use the selection tools in Photoshop CC?

  Hi - Thanks for your comments. He went on all the selection tools, however I solved the problem by changing the "Advanced Graphics Processor Setting' to 'Base' in Photoshop CC.

  Thanks anyway

• Complex transformations in SELECT

  Hello world
  
  I have a rather complex situation where I have to apply transformations to data in a SQL SELECT statement. The thing is that I have absolultely no idea how to handle this.
  
  Let's say I have a hierarchy table, as an organizational hierarchy.
  

  CREATE TABLE organisations 
  (
     organisation_id number(10) PRIMARY KEY, 
     parent_organisation_id number(10), 
     name_en varchar2(255), 
     name_nl varchar2(255), 
     CONSTRAINT fk_org_to_par_org 
        FOREIGN KEY (parent_organisation_id) 
         REFERENCES organisations(organisation_id)
  );
  
  INSERT INTO organisations VALUES (1, null, 'Top organization 01', 'Top organizatie 01');
  INSERT INTO organisations VALUES (11,   1, 'Organization 011', 'Organizatie 011');
  INSERT INTO organisations VALUES (12,   1, 'Organization 012', 'Organizatie 012');
  
  INSERT INTO organisations VALUES (2, null, 'Top organization 02', 'Top organizatie 02');
  INSERT INTO organisations VALUES (21,   2, 'Organization 021', 'Organizatie 021');
  INSERT INTO organisations VALUES (22,   2, 'Organization 022', 'Organizatie 022');
  
  INSERT INTO organisations VALUES (3, null, 'Top organization 03', 'Top organizatie 03');
  INSERT INTO organisations VALUES (31,   3, 'Organization 031', 'Organizatie 031');
  INSERT INTO organisations VALUES (32,   3, 'Organization 032', 'Organizatie 032');
  INSERT INTO organisations VALUES (321, 32, 'Organization 321', 'Organization 321');
  INSERT INTO organisations VALUES (322, 32, 'Organization 322', 'Organization 322');

  And I have to apply some transformations in the SELECT. These transformations are stored in a table. I have a few different transformations. I just put 3 here as examples:

  CREATE TABLE transformations
  (
    transform_id number(10), 
    transform_type CHAR(1), 
    organ_id  number(10), 
    organ_name varchar2(255), 
    parent_organ_id number(10),
    replace_name varchar2(255), 
    with_children char(1)
  );
  
  INSERT INTO transformations(transform_id, transform_type, organ_name, parent_organ_id, organ_id) 
       VALUES (1, 'C', 'Created NODE', 1, -9);
       
  INSERT INTO transformations(transform_id, transform_type, organ_name, replace_name) 
       VALUES (2, 'R', 'Organization 021', 'Organization 021 renamed');
       
  INSERT INTO transformations(transform_id, transform_type, organ_name, replace_name, with_children) 
       VALUES (3, 'R', 'Organization 032', 'Organization 032 Renamed', '1');

  The first transformation is to create a node in an existing one. The second example of transformation is to rename a node. The model is actually a regular expression, and it will use regexp_replace (to be able to add at the beginning of change, to add in the end...). 3rd example is a name change but also all children of a node must also be renamed with the same model.
  
  
  I need a result like this: (I've indented to read more easily)
  

  1, ,Top Organisation 01, Top organizatie 01     
    -9, 1, Created Node, Created Node      
    11, 1, Organization 011, Organizatie 011
  
  2, ,Top Organisation 02, Top organizatie 02     
    21, 2, Organization 021 renamed, Organization 021 renamed      
    22, 2, Organization 022, Organizatie 022
   
  3, ,Top Organization 03, Top organizatie 03     
    31, 3, Organization 031, Organization 031     
    32, 3, Organization 032 Renamed, Organization 032 Renamed
      321, 32, Organization 032 Renamed, Organization 032 Renamed
      322, 32, Organization 032 Renamed, Organization 032 Renamed

  I thought that if it was possible to apply these changes to a SELECT clause without creating another table and refreshing it by analyzing the original table? Any suggestions?
  
  Thank you

  Hello

  user13117585 wrote:
  All the transformations that are in the table must be applied. Regardless of the order. But I guess that create nodes must be the first step. Because in a different transformatiin, we should be able to bind other nodes to it.

  Why the-9 node is a child of organ Id = 1is made registration of the transformation values. The parent I have DC in this record is 1. Is that more clear?

  Sorry, no.

• sudden loss of selected in Photoshop 10.0.1 printing area?

  Between an image printing and the printing of the next I seems to have lost the ability to print a selected area in Photoshop 10.0.1. I use this old program because the new Photoshop does not have this option. The box is now grayed out. All know why I could lose this, and what can I do to get it back? It is extremely important to my way of working...

  Thank you.

  Marie Charlet

  Hi Charlet,

  CS3 with the selected print area option, is your selection still active in your document when it turns gray?

• How to put texture on a selection in photoshop cs5

  So I have my selection made and saved around this Apple in the center of the image. Do I want to do, put a paper crumpled up on the Apple texture and make it look like its a pice of paper crumpled up facts. Also, I want to do the colord of selection and the rest of the black and white photo. How can I do this?

  Hello!

  Once you have your selection, must be reversed. PC Mac:(Ctrl+Shift+I): (CMD + SHIFT + I) or select > inverse.

  Bring the crumpled paper as a new layer, make sure to get the PC back selection: (CTRL + SHIFT + D) Mac: (CMD + SHIFT + D) or select > select new, and then click Add an icon of layer mask on the bottom of the layers panel.

  To make the selective desaturation, retrieve the active selection by the previous shortcuts, then add a B & W adjustment layer and it will respect the selection. If the layer mask is the opposite of what you want, CTRL + I / CMD + I will reverse its values.

  Learn more about layer masks and their creative possibilities in the help files: http://help.adobe.com/en_US/photoshop/cs/using/WSfd1234e1c4b69f30ea53e41001031ab64-7867a.h tml

• transformation and selection in double

  transformation and duplicate selection does not work in flash professional cs5. point transformation comes automatically to its original point.any help would be appreciated.

  Simple which convert it into a movieclip and try again.

• Selection in Photoshop

  Hey guys ive mainly been using illustrator and just familiarize yourself with photoshop... I was wondering if there is a way to select the work on a layer without using the magic wand or tool... for example the work selection is a bit complicated and in illustrator, you can just meatball one layer so that he can choose what's on that layer, then you can edit in photoshop , it seems that you must use the tool to select and magic something to color it or fill it with something that is embarrassing, because the selection is not as precise. Can I lock or disable all other layers may simply select what's on that layer, but there must be an easier way? any help is appreciated?

  Thank you

  Command (Mac) on a thumbnail of the layer to select a layer with transparency

• Tool for mirroring for the direct Selection in Photoshop tool?

  Hello

  I'm working on a new logo, it will be a shield.

  I used the custom shape tool and changed the shield in the way that I like (on one side, with the direct Selection tool).

  But now the shield no longer symmetrical.

  

  (extreme situation of photo)

  Is there a function to change (for example), the shield and keep it symmetrical when editing of the shield?

  Sorry, my English is not very good =-)

  Hello, I don't think that there is. My suggestion is:

  -divide the form into two parts, so that you can have half of it. To do this, use the direct Selection tool, select the first high point of the page to the right and remove it

  -After you finished your edit, duplicate and mirror of your form. To do this, you can select all your vector illustration with a direct selection tool and press HUMINT + C then Ctrl + V (copy and paste)

  -Drag your new shape on the right and mirrored by using path editing/processing / reflects

  -Drag the shape of your half on the side of the first.