translation using units of foreign currency per dollar

Similar Questions

• Error when creating a receipt of foreign currency by using the Create_Cash API

  Hello
  
  I'm working on the conversion of AR received in R12 and try to create receipts using AR_RECEIPT_API_PUB. CREATE_CASH.
  Reception is created successfully when the currency_code is USD. Method of reception that I'm passing is "manually".
  
  When the currency_code is not USD (EUR in my case), I pass the values p_exchange_rate_type and p_exchange_rate_date.
  But without creating the receipt of currency giving error - error API: AR_RAPI_RCT_MD_NAME_INVALID.
  
  When I tried to look at the API for this error, I don't see this error in the API. I see an error with the name 'AR_RAPI_RCPT_MD_NAME_INVALID', but nothing shows up for the error "AR_RAPI_RCT_MD_NAME_INVALID" ("P" missing "RCPT"). I don't know where this error is calling from?
  
  I don't know why the API is mistake out for foreign currency receipts saying reception method name is invalid. But it works very well for currency_code USD with the same name of method of reception.
  
  Any help would be much appreciated.
  
  Thanks in advance.
  
  Kind regards
  Abidja

  Hi Bob,

  The Bank associated with your payment method allows "several recipes of currency? Maybe it's the issue.

  Thank you
  Anil

• Is it true that you can use Creative cloud €19.66 per month each year when you are a teacher or a student?

  Is it true that you can use Creative cloud €19.66 per month each year when you are a teacher or a student?

  The site tells me that it is only for the first year, on the phone, they told me that you get a discount every year...

  Which is correct?

  Hello

  Promotional price is valid for the first year, then you renew at the price standard student/teacher edition.

  Kind regards

  Bev

• Withholding tax in foreign currency

  Hello
  I implemented a supplier site to work with the withholding tax. After I recorded a new invoice, the system creates a new line in this Bill by crediting the account of compensation with the foreign currency. But when it creates the new invoice for tax administration, it creates in the functional currency, and not in foreign currency.
  
  Please help me how to set up the system so that it creates the invoice in foreign currency.
  
  Thank you.

  Hello.

  It is not possible to create invoices for the withholding tax in foreign currency. According to planned features these bills will always created in the functional currency, as the tax will still be paid in a functional currency to the tax administration.

  Octavio

• Strange behavior when using units and controls the ring

  Hello

  Something unexpected occurs when you use a control of the ring with units:

  1. Create the control of the ring,
  2. change the representation of double
  3. display unit label,
  4. the value of mV as a unit,
  5. edit items
     1. disable the sequential values,
     2. Add an element with a value other than zero for example 123,
     3. Ok
  6. Select the value created,
  7. create a KPI DBL with V as unit,
  8. wire from the control to the indicator,
  9. run

  What I see in the indicator is 123 V instead of the expected 0,123 V

  You guys are able to reproduce this?

  Noticed on LabVIEW 2013 and 2014, 32 and 64 bit on Windows 7 and 8.1

  Thank you

  Boris

  Bring up the digital display of the command of the ring.  You will see the units you enter under edit items menu is indeed volts.  Any prefix to units only acts on the screen.

• Cloud of Adobe desired and never used but supported $10.54 per month since August

  I just realized that I was in charge of $10.54 per month since I tried Adobe photo shop and Lightroom "free trial" in the month of August.  I didn't know that this "free trial" would be converted to a months membership.  So basically I was charged $50 + for the services I have not used and didn't even know that I had access to.  I decided after trying these programs, they were too advanced for me.  I cancelled my subscription today.  Is it possible to have the money repaid, especially to decrease since I do not use this program.  I am very disappointed by this situation and feel taken advantage of.  I received emails from cloud to Adobe that seemed ads and I deleted.  I don't know even what cloud of Adobe is or how it is used.  Please notify: refund claim.

  Sincerely,

  Vicki Reed

  This is an open forum with a mixture of program users and staff of Adobe, Adobe support... you need Adobe support

  Coordinates of Adobe - http://helpx.adobe.com/contact.html can help

  -Select your product and what you need help with

  -Click on the blue box "still need help? Contact us. "

• How to check where the table field has been used as a foreign key in the database

  Hi I have a field in my table Office I had office_code field, this field has been used in the tables of diffirent as foreign key is a sql I can wirte to see all the tables that have used this field as a foreign key
  
  Edited by: adf009 09/05/2013 10:37
  
  Edited by: adf009 09/05/2013 10:38

  Check this box

  SELECT * FROM user_constraints WHERE table_name='EMP' and CONSTRAINT_TYPE='R';
  

  Type = 'R' means referential integrity constraint type.

• using unit program report

  Hi all
  as Forms 10g we use: blockname.item_name in the triggers.
  
  can I use report fields in oracle report generator 10 curriculum units gr 2.
  
  as if the value of FIELD1 with 'abc' and then
  Field1 will be displayed in the reports otherwise Field2 will show.
  End if;
  
  or any method is there.
  
  Please answer...

  You must create to format two triggers, one for each field. For example, Field1:

  if :your_column = 'abc' then
    return true;
  else
    return false;
  end if;
  

  Field2 for the same, but the true and the false power.

• How to check using unit tests

  Hello

  How can we test using ASMocking unit if an event is called and the next screen is displayed

  I use tools

  ASMOCK

  FlexUnit 4

  Praveen,

  A few questions. First of all, it is a forum of FlexUnit, so I don't know how to help you with questions of ASMock. You can certainly post here, but I don't know that you will get a response. You will probably need to reach out in an ASMock forum or site to help.

  Second, I'm not sure that FlexUnit is the right tool for you. It is a framework, which means testing a single unit... usually a class isolated both unit tests. If you want to see that when an event is dispatched a new screen, you see dozens to hundreds of classes depending on whether your project is ActionScript or Flex-based.

  If this is the type of test you want just be sure that you really want to try to do this in a framework of unit tests. It will be much more difficult and probably not meet your needs as well. If you need other tests to that high of a level, I would consider more than one tool of functional such as FlexMonkey or many tests

  Mike

• Poor - Wireless number spectrum 13 HP - HP support now cannot use unit to all the

  I contacted HP support yesterday because my laptop HP spectrum 13 Pro has a lot of trouble getting a wireless internet access.  Sometimes it works, sometimes it works then falls down; and he is never able to connect using my iPhone as a hotspot for more than 10 seconds.

  HP support person asked me to install 2 updates.   Now, my laptop does not at all!  It says "Boot Device not found".   I have to wait for a technician completely replace the hard drive, then wait a week for a USB plugin load a new system.

  HP are * not * offering a laptop for me to use during this time, which means that I don't have a laptop on business for a week (maybe more?)

  Also, I have to buy Windows software and other software that I had paid for such as Foxit PDF and I will not get compensated for that.

  HOW IS THIS POSSIBLE? ! ?

  I just sent you a private message. If you are unsure how to check your messages from the forum, this post has instructions.

• Greek Government restrictions in foreign currencies

  I'm a Greek customer pay with my credit card each month. All Greek citizens are however recently faced with the same problem: Government has restricted all personal foreign operations and our credit cards do not work. This was done at the Center to allow the Greek State avoids bankruptsy. My credit card is completely up-to-date, but adobe cannot draw any money from it because the Government restriction on all Greek citizens. Y at - it a Greek account where we can pay our monthly payments now that we cannot send money abroad? In the case where I have a friend with US citizenship will you accept his card?
  I know that Google has opened Greek accounts to facilitate the situation.

  If you have an answer to this pls send me.

  Thanks in advance,

  Foteini Malli

  Hi Foteini,

  Please contact support by calling/chat for these queries.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• How to create a procedure using unit program

  Hai All
  
  II have created a procedure like this
  
  PROCEDURE Duty_calc
  IS
  procedure w_Time
  is
  Start
  Update dail_att set wtime = (select lpad ((to_number (to_char(outtime,'hh24mi')-to_char(intime,'hh24mi'))), 4: 0) in the dail_att where attend_date = f_date);
  end w_time;
  
  Start
  If wtime > 0830 then
  Update etime set dail_att = (select lpad(wtime-0830) from the dail_att where attend_date = f_date);
  on the other
  null;
  end if;
  duty_calc;
  end duty_calc;
  
  
  And I declare in unity of programs such as Duty_calc and whereas I will carry out my procedure I got an error
  
  What must I declare a my procedure internal in my program unit
  
  
  Concerning
  
  Srikkanth.M

  Just write the name of the procedure simple no need to CALL

  my_Proc;

• By using < Parent currency > HS. Exp

  Hi all
  
  I need to use the value < Parent currency > member as a SOURCE in my calculation.
  
  I set the variable 'HS = strVSource. Value.IsTransCur ()", then use that variable in the right part of my HS. Calculation of exp
  
  The resulting value is 'False' and the building is abandoned. When you use < Parent currency > as the destination, the same configuration works very well.
  
  That's why I can write < parent currency >, but not read the < Parent currency >... .is this true?
  
  Thank you

  When you want to as a member of your source value, in which Member you are the target? In other words, if you have a condition value that says

  If HS. Value.IsTransCur () = True Then

  Hs.Exp 'a #xxx is a #ooo. "

  End If

  This implicitly means that the source is also the same value member, in that you are. I would add that this does not mean that you are , but rather means that the translation has been made: that the currencies of source and target are different. In other words, if you have a child in EUR and in USD, the HS function parent. Value.IsTransCur () = True will be true not only for the parent currency "USD", but if the user translated the basic EUR GBP entity, the function ALSO returns true. If you are [percentage] for example and want to read you must use the REAL currency of the source such as 'Total GBP' value member, so that should get what you want.

  -Chris

• Way to the commands per second using PowerCLI

  You can use powerCLI for average orders per second of a virtual machine on a historical period in the same way, as you can with cpu.usagemhz.average?

  Just to clarify:

  Does

  datastore.numberreadaveraged.Average

  give me information on the entire data store connected to the virtual machine? Or is information specific to just the VM I comment on?

  (In this case, I'm eager to get all the IOPs for all all of the virtual disks connected to a specific virtual machine)

  It gives you the IOPS / s specific to entire virtual machine and not the data store.

  Also - I'm the zeros for my data when I launch the present.  I see in vSphere client commands per second only to the data in real time, not for the last day, week or year.  Is it because of my level settings statistics?

  Yes, vCenter 5.0 and place unfortunately don't collect statistics of e/s long term on a per-VM level more.

  However, you can still add these values to return to lower levels of statistics as described in this article:

  http://alpacapowered.WordPress.com/2012/12/17/control-vCenter-performance-counter-collection-and-get-back-VM-IOPS-statistics/

• Problem with the currency in the form of exchange rate data

  Hi Experts,
  
  I have a problem in the form of exchange rate data. I created an application with several currencies (EUR, USD, INR) and I created a data form for the exchange rate. All work well, but all in am going to enter data for a given entity, then it is allowing me to enter only in local currency. I also need to enter data into its reference currency which is not possible for me. I tried the option allow multiple currencies per entity, but it does not work.
  
  For example: assume that the entity is in North America whose base currency is the USA but can not enter by the selection of currency local option when I select the currency like the US, is to show am only read, not able to get into the currency of the United States. But I need to enter data by selecting from the USA.
  
  Please help me on this.
  
  Thank you and best regards,
  Combot

  923621 wrote:
  I use built in currency conversion. The data that I entered the local currency saving in my base only currency, but my requirement is that the user must enter data by selecting its local currency (people of North America must select USD to enter data and Indian must select INR to enter data like that). Is it possible to like this.

  Select USD as the base currency for the North America and INR for the India (which is how it should be).

  So, whenever the user has to do the data through forms of data entry, it would be on the local currency and after the calculation is run it could fill its respective currency.

  Concerning
  -SM