Transparency of the lock, where is it on adobe animate?

Similar Questions

• Why can I not make my background of the transparent sidebar the way where he was?

  After you have reinstalled Vista after a hard disk crash, I can't get the sidebar to have a transparent background, the way that it used to be under the original installation. It isn't even an option for this in the sidebar help/Setup. I don't think I made it transparent voluntarily last time - it is all automatic. Now, I can't make sure, evenintentionally.

  After you have reinstalled Vista after a hard disk crash, I can't get the sidebar to have a transparent background, the way that it used to be under the original installation. It isn't even an option for this in the sidebar help/Setup. I don't think I made it transparent voluntarily last time - it is all automatic. Now, I can't make sure, evenintentionally.

  I am now using Windows 7.
  For 6 years I have been using Vista, I never activated Aero, not to mention transparency. Reason: huge consumption of resources and slow down the performance.

  Anyway, you are not supposed to activate the transparency first before you can see the sidebar with a transparent background?

  Here is the tutorial to activate the Areo glass transparency:

  http://www.Vistax64.com/tutorials/75413-Aero-Glass-transparency.html

• Create a slideshow with the arrows 'next' and 'prev' in Adobe animate CC?

  I'm a novice at HTML 5 canvas in Adobe animate.

  I'm working on the project with Adobe animate CC. The project includes 5 buttons that link to the quite different picture slideshows.

  I can't find a single reference online on how to create a simple 'next' and 'previous' buttons that will go forward or back a frame.

  The codes I have found online seem to produce inconsistent results (they will advance through the first slide show very well, but then the second will go to random slides).

  I also tried the this.gotoAndPlay (5); for each image, but that starts to have problems in the second show.

  Any help would be appreciated.

  I would be keys movieclip and label the first and the last frame of each slideshow and use these labels for your 5 buttons. If your buttons are on the first image (IE, frame 0) and starting slideshows after frame 1, you can use:

  in the first image (IE, frame 0)

  This.Stop ();

  var label_firstframeA = ['slideshow1frame1', slideshow2frame2', etc...];

  var label_lastframeA = ["slideshow1lastframe", "slideshow2lastframe", etc...];

  var num_firstframeA = [];

  var num_lastframeA = [];

  var first_frame;

  var last_frame;

  for (var i = 1; i)<>

  This ["button_" + i] .ivar = i;

  This ['button_' + i] .addEventListener ('click', slideshowF.bind (this));

  this.gotoAndStop(label_firstframeA[i-1]);

  num_firstframeA.push (this.currentFrame);

  this.gotoAndStop(label_lastframeA[i-1]);

  num_lastframeA.push (this.currentFrame);

  }

  this.gotoAndStop (1);

  This.next_button.addEventListener ('click', nextF.bind (this));

  This.prev_button.addEventListener ('click', prevF.bind (this));

  function slideshowF() {}

  FIRST_FRAME = num_firstframeA [this.currentTarget.ivar - 1];

  last_frame = num_lastframeA [this.currentTarget.ivar - 1];

  this.gotoAndStop (first_frame);

  }

  function nextF() {}

  If (this.currentFrame<>

  this.nextFrame ();

  } else {}

  do something else

  }

  }

  function prevF() {}

  {if(this.currentFrame>FIRST_FRAME)}

  this.prevFrame ();

  } else {}

  do something else

  }

  }

• I've just updated to 4.0 and I no longer see the "lock" when I access my Bank; where it is now?

  In my previous version of Firefox when I accessed my account in the Bank and other private Web sites an icon of a lock appeared somewhere on the pane. Since I've upgraded to version 4.0, the icon, and I don't will not access my accounts private without knowing that the site is secure. Where is the 'blocking' appear on the version 4.0?

  The lock has been rolled in the How do I know if my connection to a Web site is secure?. Which is in the address bar if the area next to the icon in the address bar of the site is blue or green, you are on a secure connection. Check the name of the site in blue or green to match the site, that you expect to be visited.

• "The drive where windows is installed is locked. Unlock the drive, and then try again. »

  Have a laptop Envy M6-K010DX. Due to a problem of the internet while improving to win 8 to 8.1, the PC does not start correctly, and Windows Explorer will not load. Has decided to "Refresh" of the operating system and is gone to F11 restore utilities. When I go to the utility of refreshment and follow the prompts that I reach a message that says, 'the drive where windows is installed is locked. Unlock the drive, and then try again. "I was looking for support for the unlocking instructions and apart from some commands bootrec (which did not work - probably because I don't have a Win 8 disc) not much is available.

  The only access I have for execution of orders made by the tasks Manager command-line and F11. What is this 'locked' drive, anyway? Someone at - it any information on that?

  Hello Lara.

  IF you have updated from 8 to 8.1 and the process was interrupted during installation, this may damage the disc and therefore locked error. "Refreshing" the system would not be the answer that you need to clean install Windows 8 again. 8.1 update can break the bond of the recovery partition, especially if it has become corrupted as indicated.

  You must clean up the installation with the recovery discs, you must have created before you updated to 8.1.

  In addition, if you do not have the recovery disks, you can buy a set of HP or install a regular copy of Windows 8 and then update the drivers manually. HP has the Windows key now integrated into the bios.

  This forum is used on a voluntary basis and is not maintained by the HP Support for substitution of contact.

  Your message looks like not it was even 24 hours old before you decided to delete it from the original computer?

  I'm sorry to hear you had to do this.

  If you need to HP support, you must contact them directly to your country or region.

  Contact HP-Assist phone USA | HP® official site

  Contact HP worldwide | HP® official site

  Good luck with the new computer.

  Any brand or model you purchased now, don't forget to create the recovery disks/drive.

• Where to find the lock of the Pixma MG6320 printer scanner?

  Hello... Where to find the lock of the Pixma MG6320 printer scanner?

  Hi set231,

  PIXMA MG6320 is not a scanner lock switch.  If you try to set the printer for transport, please follow these steps:

  1. turn the unit off.

  2. confirm that the POWER led is off, and unplug the machine.  Please do not unplug the machine while the POWER light is lit or blinking white, as this may cause a malfunction or damage to the machine, the machine impossible to print.

  3. remove the output paper support, and then close the paper output tray gently.  The output tray extension is retracted automatically when the paper output tray is closed.

  4. disconnect the printer from the computer and the machine cable, then connect the plug to the machine.

  5. use duct tape to secure all covers on the machine to keep them open during transport.  Then pack the machine in the plastic bag.  Fix the material of protection to the machine when the machine to pack in the box.

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.

• Error: "the drive where windows is installed is locked, unlock the drive and try again" while trying to regenerate the system

  My daughters Toshiba S955-S5373 went all green, she says while she helped the battery out. I didn't know she was in trouble. We tried to solve; However, Bad_system_config_info appears before diagnosing and resolving problems. After 4 hours, nothing has been resolved.

  I found the DVD we created initially and attempted to load that. We shut down the laptop with the power and reverse holding F12 button. I tried to boot from the DVD, but it does not read the DVD and just crossed the initially to start and diagnose and solve problems. I have waited 2 hours, but without success.

  I turned off again and I just tried to refresh the PC. He said "the drive where windows is installed is locked, unlock the drive and try again".

  I then tried auto repair but could repair. Log file C:\Windows\System32\Logfiles\Srt\SrtTrao;/txt appeared.

  I even tried to reset the PC as a last resort. But the message failed to reset the PC required A disk partition is missing.

  Don't know what I can do. Can you help us?

  Original title: Toshiba S955-S5373 will not start

  Hi Annaed,

  Thanks for posting your query in Microsoft Community.

  I can understand your concerns to your system and will certainly guide you in the right direction to solve the problem.

  Control bug BAD_SYSTEM_CONFIG_INFO occurs if the SYSTEM registry hive is damaged. However, this corruption is generally unlikely, because the bootloader, known as NT Loader (NTLDR) in versions of Windows prior to Vista, checks a hive for corruption when loading the hive.

  This bug check can also occur if some values and critical registry keys are missing. You keys and values may be absent, if a user manually change the registry.

  As per the error message "the drive where windows is installed is locked, unlock the drive and try again", I would refer to the suggestions posted by phanlon7 replied on 12 October 2013 in the next thread and check if they are useful.

  Windows crash hard drive - discount - locked, unlock the hard drive

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• Since the update to the new version 6.0 I see more the lock of privacy secured on protected pages. Where at - it go?

  Just updated and am seeing the lock of privacy for secure websites

  In Firefox 4 and later you no longer have the Status bar which showed the padlock in previous versions of Firefox.
  
  The padlock shows only that there is a secure connection and does not guarantee that you are connected to the right server.
  
  So you could always be connected to the wrong server if you make a typing mistake in the URL and someone said that mistyped the URL.
  
  The lock feature has been replaced by the How do I know if my connection to a Web site is secure? on the left end of the address bar.
  
  
  
  See also:

  • http://www.dria.org/WordPress/archives/2008/05/06/635/
  • https://support.Mozilla.com/kb/site+identity+button
  • http://www.Mozilla.com/en-us/Firefox/security/identity/

  You can use this extension to get a lock on the address bar.

  • Lock: https://addons.mozilla.org/firefox/addon/padlock-icon/

• Where is the lock? I can't see it anywhere on the screen when you are connected to the https site

  Until I downloaded the latest version of Firefox, it appeared with icons in the bottom right of the screen. With Internet Explorer8, it appears on the right side of the address bar.

  The lock has been replaced by the site identity button, for details on use, see https://support.mozilla.com/kb/Site+Identity+Button

  If you want to add a padlock icon in the address bar, you can use the add-on locks- https://addons.mozilla.org/firefox/addon/padlock-icon/

• where can I find the "lock" sign when I enter a verified site. In earlier versions, he used to appear on the status bar at the bottom right

  How can I check in firefox 4 If the Web page I'm is secure? in earlier versions, the "lock" sign was popping up on the status bar at the bottom right.

  You can click on the How do I know if my connection to a Web site is secure? on the left end of the address bar to see the padlock, and then click the button details to display additional information about the connection.

• iPod in the locked mode, no matter where the hold switch

  Have a 30 GB iPod which can not be taken out of his locked mode.  Was plugged on my desktop Windows 10 to be recharged.  He had some charges, if the battery was not completely drained.  iTunes started when the iPod is connected and the display on the iPod turn on.  The message on the screen was 'do not disconnect '.  iTunes never recognized the iPod and never started a resynchronization.  After four hours, the iPod shows always the same message, that the battery symbol does not indicate the battery is recharged and the locked icon is in the upper left corner, even if the switch is not located mode. Y at - it a hope that I can access my iPod again as all my Christmas music is on it?

  If the iPod does not respond, try to do a Reset (reboot iPod)

  Learn how to reset your iPod - Apple Support

• Reminders do not display or stick to the lock screen in iOS10

  IOS10 (10.0.1 and 10.0.2), on an iPhone (I use an iPhone 6), reminders are no longer reliable. I had several cases where the callback doesn't show even on the screen lock and many more times when the recall won't 'glue' to screen lock for more than a short period. Before iOS10, when you said to remind you at a certain time or place, the recall would display on the reliable lock screen until she has been marked as "completed".

  It is a major issue for people who depend on the application for the important tasks and calendar. There is a thread of any discussion on this point, for some reason, has been marked as "solved" even if a large number of people continues to post telling him that there is a problem for them too (as the thread located here). I wanted to start this new discussion which we hope will remain open until it is effectively resolved.

  Thank you!!! This is a HUGE problem!

  Since the update I had to reboot my phone EVERY day.

  Is the stick of reminders... or they do not. Lately they don't yet show upward. Then other things stick to the lock screen can't get rid of.

  Currently this feature on the phone is USELESS

• IPhone stuck on the lock screen

  I've just updated to the latest version of iOS 9.3 beta software (I would check to see what it is exactly, but I can't really do this). This problem didn't occur until I installed this, and it only happened on my iPhone 6s, not my iPad Mini 3. Here is a brief summary of what's going on:

  I turn on my phone using the power button. I try to hit to swipe to enter my access code. He stops and restarts.

  I'm trying to use the contact IDS. He stops and restarts.

  I try to put my password in by sliding upward to access the camera. He stops and restarts.

  Everything I try to do, it crashes. I tried turning then turn it back on again, hold the "home" button and the Start button / stop, nothing works.

  I was also in a situation where I needed to put my phone in airplane mode. I can't access the center of control from the lock screen to stop, but I turn WiFi and Bluetooth on until I turned off my phone. My watch says it's connected. My phone is done without WiFi.

  Anyone has any suggestions, in addition to a trip to the Apple Store? Thank you!

  Note: I was extremely stupid and didn't back up my phone. But to cut me some slack, I couldn't technically. The Mac I have is way outdated and does not support my current model of the iPhone, and my laptop running on Windows is not able to start. If just getting worse and worse, I have an old backup I could try to install, but I really want to take this path, because it was almost a year ago.

  If you don't have any computer that supports supported a version of iTunes how do you have installed a beta version? Looks like you've totally corrupted the phone. All you can do is restore using a computer with Windows 7 or later version or iOS 10.8.5 or later and the latest version of iTunes.

• How remove plastics cover Satellite M70-166 and replace the lock?

  I need to buy an another cover for my Satellite M70. However I don't know if I can manage to remove the old cover and put a new one.
  I have the opportunity to purchase a cover without a lock, so I need to change my old damaged cover one lock.
  It's easy to do it by myself (I mean change the cover up and change the lock)?
  Do I need some special tools to do?
  Thanks in advance to answer.
  Anna

  Hey Buddy,

  If I were you, I am looking for a technician because it s not so easy to exchange these parts around the LCD. The problem is that the stuff is very well suited and you don t know where all the screws might be.
  Just a suggestion: Don t do it on yourself, prefer to give someone who is familiar with laptops and has some experience with the dismantling of these mobile systems of the machine.
  But if you are really sure that do you it on your own, then just google for your machine, because there are several forums where users are showing the dismantling of their machine so that other users can easily do the same. But beware, if you have always guaranteed, then you will lose it at the opening of your machine.

  Welcome them

• How to table of waveform of input 1 d in the lock with the amplifier

  I have a LabView application that I have to change to include a lock in the amplifier.  The application uses a capture card of data several times to capture a sample of 0.1 s of two signals (one signal, a single reference) in a laboratory test.  Before the measure was made by the base RMS module to record the VRM in the signal, and the reference is ignored.  However, the measures that I am now the scene run many s a lower and so I would use a simple RECS in the kit OR of.

  I am happy (I think) with the configuration of GARLIC but I am struggling to understand the requirement of input data.  It should be an array of 2D, with the identifited of reference signal.  However, the output of the part of the utility that captures the waveform is a table 1 d of waveform.  Could someone advise me on how to convert the table 1 d of waveform in a 2D table suitable for admission to the GARLIC?

  As you may have guessed that I am a newbie to LabView, I try to modify an application designed and assembled by a former colleague, so I'd appreciate simple suggestions!

  TIA.

  You have separated for each signal waveform 1 d arrays, or do you have a 1-d single waveform chart where signals are separate items in the table? If this is the first, you should do something like the code below. If you have a single Bay, then the code would be similar - you could just use a table of unique Index function. You may or may not need to transpose the table 2D. I don't know what waits for the lock in Subvi - channel data by row or column.