Trash will not drain cleaning disk

Similar Questions

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• My DVDRW DRIVE will not write to disk

  My DVD - RW drive will not write to disk, it is only recognized on my computer as a DVD ROM and CD - ROM only. I looked in Device Manager and there is no question mark by it and he says it's working properly, I had it works normally about 2 weeks ago, can you help me? L.M.Baggley

  If it worked about two weeks ago, you could try a restore point to return the parameters of your system they had previously, by using the system restore. It is in the startmenu, all programs, system, SYSTEM RESTORE tools. Choose a point of older and not the most recent. Alternatively, right - click the icon for your drive and make sure that the recording tab is there, and that registration is enabled on the computer. You will also find it better if you record at a slower speed and not the faster if you want to avoid reading errors. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• Satellite A500-141 - the CD/DVD drive will not recognize any disk in the status bar

  I watch the DVD yesterday and he played upward halfway through and almost jerky. Ejected and thought no more of him now, the player will not recognize any disc, be it video or sound. I tried a system restore but still the same thing that it is not read disks. Any help appreciated.

  Thanks in advance.

  Hi quietly,

  If your CD/DVD drive doesn't work, how do you have a system restore?

  Is the CD/DVD drive listed in Device Manager correctly or you see a yellow exclamation mark on it?

  Maybe the lens is dirty and must be cleaned with a Microfiber cloth. Open try CD/DVD and try to clean the lens with a clean Microfiber cloth.
  Check this box!

• How can I fix it? Trash will not clear the contents of the file...

  Won't empty my trash! I ran clean, Defrag, Norton 360 scans, etc... can not get the trash to empty.

  Hello

  · You receive an error message when you try to delete the files from the Recycle Bin?

  · Will there be any changes made on the computer before the show?

  Run the fix it from the link below and check if this can help: diagnose and repair Windows files and folders problems automatically: http://support.microsoft.com/mats/windows_file_and_folder_diag/

• Backup will not accept a disk formatted in drive A:

  I am running XP with SP3 and my Windows backup program works perfectly, creating the backup file on an external hard drive. At the end it asks me to insert a disk formatted in the A: drive, what I do, but no matter what I do, it just do not see it and asks me to insert a disk again. The disk is there, it has been formatted and is clean and it works fine, except for the backup program. Why? What can I do?

  Hello

  Ideally, Windows backup and restore will not ask for floppy drive.

  You try to create the backup recovery (of the ASR system) automated system?

  You configure the backup password protection on your external hard drive? If this is the case, I suggest you to not set the password for your backup.

  Reference: Use backup to protect data and restore files and folders on your computer in Windows XP and Windows Vista

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Will not eject the disk image of firefox

  The Firefox disk image will not eject if I used Firefox since turning on my mac and when I get to eject it it comes back as soon as I open Firefox, how do I get rid of him?

  See:

  • https://support.Mozilla.com/kb/installing+Firefox+on+Mac
  • http://KB.mozillazine.org/Installing_Firefox#Mac_os_x

• Portege 3500 will not start up disk

  Hello

  I recently acquired the laptop above. I decided that I would try to reconstruct it, bad idea.
  I don't have an external CD or recovery CD but I have another laptop and a Windows XP CD.

  I removed the HARD drive the 3500 and put it in my other laptop. I formatted the drive and installed windows. Everything worked Ok and good boots in my other laptop. When I put the disc in the 3500 however, it will not start. All I see is a black screen, not even a cursor or any error.

  I tried to format the drive again and the sys'ing, it does not work. I tried installing on my other laptop then continue on the 3500 but that doesn't work either.

  I was wondering if the 3500 was looking for a partition that I deleted. I don't see why it will not start when start up ok in my other laptop HARD drive.

  Someone at - it ideas?

  Thank you
  Simon

  I don't think that this has nothing to do with the score. You get the black screen, because the other laptop is quite different installed on Windows ACPI etc.
  If you have a usb floppy drive try this:
  1 partition and format the disk with Fat32 (or fat 16).
  2. from your installation CD copy the i386 on the partition directory (attach the HARD drive to another laptop)
  3. start the P3500 leave a floppy disk bootable BACK, change to the I386 directory and start the winnt.exe

• My dvd player will not read my disk of Windows 8 Pro upgrade

  Computer laptop Dell Vostro 1500 with XP Professional, my TSSTcorp L632H DVD player will not read my Windows 8 upgrade disk.

  It will read other DVDs. I've updated the firmware.

  The properties of the drive is display type as unknown file system CD player with blue disk image but used space and free space as 0.

  By using Device Manager, when I ask him to fill the volume is the disk CD 0, Type DVD, free media, not applicable Partition Style, capacity, space Unallocate status and placeholder show all 0.

  I also tried to use a separate USB TSSTcorp DVD drive and it will not also read the Windows8 disc.

  My desktop (Windows, 8, 1) DVD drive Asus computer reads the disc of Windows 8, but I can't use it to load Windows 8 on my laptop - or what I can?

  Can I connect my laptop to my desktop to upgrade laptop computer at Windows8 use of the desktop DVD player?

  I managed to copy the disc of Windows 8 on an external hard drive using another laptop that can play the DVD.

  Then I attached the external hard drive to my laptop and run Setup from there and installed Windows 8 to my old laptop to Windows XP...

  Thanks for your suggestion.

• trash will not remove the vista mail

  maIL COMES BACK TO TRASH ON VISTA

  vistia basket of mail will not delete

  Make sure you have installed SP2.  You can compact and repair the database with my Windows Mail utility, and it should fix the problem (www.oehelp.com/WMUTil/).  But its likely that some other program 3rd party intervened in the first place, in order to check that (see www.oehelp.com/OETips.aspx#3 - and also FYI just see #15).

  Steve

• Windows will not use the disks of backup file to restore, get "unknown error."

  Backup done recently will not work when you try to restore the files.  System indicates an "unspecified error" has occurred.  No clue on what is blocking recovery?   Thank you

  Hello

  see if this information helps you

  How to make a backup of your data

  http://www.vista4beginners.com/how-to-backup-your-data

  How to restore your files

  http://www.vista4beginners.com/how-to-restore-files

  the 1st link below is how do the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  and that is how do to recover the backup complete pc

  http://www.bleepingcomputer.com/tutorials/tutorial144.html

  and here is the information of microsoft in restoring a system image backup

  http://Windows.Microsoft.com/en-us/Windows-Vista/restore-your-computer-from-a-system-image-backup

  If you have problems, it's in here is a forum for microsoft specifically for backup issues

  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Satellite P300-1 c 8 will not start up disk drive

  Hello

  I had a little play with the start up programs, partitioning the hard drive and the marking as assets and remove programs I thought I didn't need.
  I of course had no idea what I was doing!

  Laptop will go to toshiba screen then turns off, I can not boot from the hard drive.
  I put the hard drive in another laptop and it works fine.
  J’ai mis le disque dur de l’ordinateur portable dans le buggered un et qui fonctionne très bien.

  How the hell can I put the original back with it works?

  Really really stuck with it!

  Any help would be appreciated.

  The only thing I have not tried is the restore disc but I'm not paying for one if it does not start as itl be a waste of money.
  Looks like it is a compatibility issue with the processor and hard drive because they won't be friends!

  Thanks in advance

  Hello!

  You can start in safe mode?

  If you don t have a recovery disk, use the Microsoft installation disc and try to boot from it.
  And you said that you can boot from the hard t disc, done you have tried different discs?
  Maybe some are not legible or not bootable.

  The best way would be a recovery disk. The installation takes a few minutes and you have a clean install with all the drivers and tools of Toshiba.

  Good bye

• CD player will not recogize any disk media

  My CD player won't recognize any CD/DVD.  I ran the program Fix It, but it tells me that I have unreadable media in the CD drive. All other checks have the green check mark next to them, so I guess they are OK. I even reinstalled my driver. The computer indicates that the device is functioning properly. In addition, I don't hear the sound "Dervishes" when I insert a disc in the drive.  He used to work perfectly. I could read CDs and write CDs - it simply stopped working.

  I am running Vista Home on a Lenovo Ideapad 510 (32-bit) computer.

  Any help/ideas will be greatly appreciated.

  Earth.

  Hello

  You do not hear the ROAR player indicates that it might be a power supply problem or have a
  has no engine support system technology and the need for a real computer store (no leeks and)
  glances at BestBuy or other BigBox stores) or Lenovo's Support.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Toshiba Satellite will not recognize recovery disk

  I'm trying to restore my Toshiba Satellite laptop to its original factory condition. However, when I insert the recovery disk that was provided by Toshiba, I get this error message:
  + "This recovery and Applications CD is not configured to work with this machine. This CD is for: Satellite P105. Please use the good recovery and Applications CD. » +

  My laptop model is "P105-S6084. Anyone happen to have a solution?

  Try to contact the service provider who have traded the motherboard and explain the situation.
  As Akuma written with false information DMI, you won't be able to use the recovery CD/DVD Toshiba original.

  Is it the first time you use recovery media after Exchange of motherboard?

• HP Pavilion p7-1234: functional CD/DVD drive will not boot Clonezilla disk recognize

  Have three HP p7 in small desktop running Win 7 64 bit. (Avast free version)

  None of them will recognize a bootable Clonezilla ISO or Zip, whether on CD/DVD or USB.

  Measures already taken:

  BIOS set to boot from CD/DVD

  In turn the BIOS configured to boot from USB

  Have used any compatible version of Clonezilla downloads based on my operating system and the processor, including the generic i686 ISO and Zip. (and makes bootable USB drive)

  CD/DVD and USB function perfectly well otherwise. Able to access the other disks and USB media with no problems.

  Also able to see the Clonezilla ISO when I look at the CD/DVD drive.

  It starts simply what whether Clonezilla.

  If someone has encountered this, I would like to share your experience.

  Thanks for your time.

  One rookie mistake.

  Problem:

  Bad, I carved the Clonezilla ISO to CD/DVD disc.

  Solution:

  1. download the ISO Clonezilla appropriate for your computer, on your desktop.
  2. place the disc in the CD/DVD drive
  3. "right click" on the Clonezilla ISO on your desktop.
  4 Select "Burn Image" and follow the default values.

  Now you have a proper boot Clonezilla disk.

  Next:

  1. make sure the BIOS is set to CD/DVD is bootable.
  2. place Clonezilla disc in open the tray of the CD/DVD drive.
  3. restart the computer and close the CD/DVD tray
  4 put your finger on "F9" key and now wherever the blue HP screen appears, press "F9".
  5. boot Menu loads.
  6. move arrows down to the first line indented under "ATAPI CD/DVD DRIVE...
  SATA2 or SATA3 will be according to your system.
  7 hit ENTER.

  Clonezilla immediately, boots and loads.

  I hope it works for you.