Using the built-in function in the definition of the relationship between the two blocs.

Similar Questions

• How to use the two counters to PXI-6280, to read and write at the same time?

  Hi all

  I try to use PXI-6280 counter to generate a command of step motor pulse train.  The idea is to send a number done and known pulse for the engine, which belongs to a system XYZ. The point is, if, at some point, the user or the security system can interrupt the movement. If this happens (and will be... a lot), I will lose the real position, because I don't know how many pulses were actually sent to the engine. That is why I want to use the other cost to count impulses how were actually sent to the engine. I can start any tasks (generating or account), but only the first started task will operate. I met a couple of mistakes and I'm not able to find a solution.

  Is it really possible to use the two counters? I've already done this in a pci system and worked without problems.

  Thanks in advance,

  Giavonna

  Electrical engineer

  I'm afraid that I don't understand your idea. Could explain you better?

  Material of the series M support pointing to an arbitrary digital signals at rates (the clock must be provided from another source, for example a counter).  If you want a digital pulse train finished output and have access to a counter (the two counters if find you another source for your clock, for example the subsystem "output frequency"), you must use this subsystem 'digital output' rather than the output of the counter.  There should be examples in the finder of the example shows how to configure a finished task of digital output.

  Now I'm generating sample clock having a single Timed material Point (the only mode accepts this mode), and configure the counter with finite samples.

  I don't think not just single point NI the hardware, that's what you want.  More commonly, output meter tasks use timing 'Implied', where the release date is implicitly determined by the characteristics of the pulse user-defined.

  Is there a way to stop the production of only one meter when a finite number of pulses has been played in another counter?

  Yes, but it's a little tricky.  You can set a trigger 'Pause' on the output task, with the soruce the break being the internal release of the counter used for the task of entry.  Set the initial value of the counter of entry to 2 ^ 32-N (or maybe 2 ^ 32-1-N, I don't have a system right now to check) where N is the desired number of pulse output.  Together the counter event behavior for the counter edges of County switch output (this is a property of DAQmx export Signal).  When the counter of entry reaches terminal, its in-house production switches, causing thus the task of output to pause.  You can then stop the task in the software (you should be able to use the output of the task of entry counter event to signal to the software when the output is paused).

  Now that I've written that the whole paragraph, I remember something * similar * to work around a limitation of the driver here .  It is not quite the same implementation I described above, but really, you can use a meter output or a counter entry to get the same effect (it could be a good place to start anyway if you want to try this).

  Is there a way to read pulses them how have been generated, without the other counter, counting impulses?

  N °

  Best regards

• Update Windows using the two direct connection to proxy nd

  Use the two nd direct net connection by proxy, more time via proxy, is there a way I can configure update without changing the settings?

  am on windows 7 Home premium

  Please correct me if wrong, using "netsh winhttp import proxy IE" it says you can update via proxy, passing 'autamatically detected settings' proxy servers, will be here all the problems and errors in its conclusion/search for updates (does not search for updates error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000")?

  Asked me to do this update of proxy (windows security essentials)

  The open command prompt window. [In Vista and Windows 7 you need to open the prompt as Administrator]

  2. type of this syntax: NETSH WINHTTP PROXY DEFINED (Insert here the number and proxy server) and press ENTER.

  Example: NETSH WINHTTP SET PROXY 1.1.1.1:8080
                         OR: NETSH WINHTTP SET MYPROXY .NET PROXY: 8080

  If his point is it normal that windows update as well as the WSE update fails with direct connection?

  happened with me with error msg error codeWindowsUpdate_80072EE2""WindowsUpdate_dt000"

  If the details of my proxy are 192.168.0.1 port 3128, which is the entrance to the command line...

  I had to reset the connection parameters using winhttp reset to retrieve the update in direct connection to the network

  Please give me a good solution with this

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072ee20x80072EE7; 0xC80003FA 0X8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• I used up to the allocation for the region 1 & 2 DVD for help. stuck on region 1 now. I need to use the two regions for my DVD. Help, please. Beryl

  I used up to the allocation for the region 1 & 2 DVD for help. Stuck on region 1 now.  I need to use the two regions for my DVD. Help, please. Beryl.

  It isn't a MS solution, there are solutions to third parties not supported by MS

• Using the two RAM slots

  I have 2 RAM slots. I have 1 GB installed on one of these locations.

  A few months before that I installed a 1 GB of RAM on another location (I gave my CPU to the shop actually to install) and it worked very well.

  I had some problems with my PC so I formatted the entire hard drive and reinstalled my Windows 8. But now, he uses only one slot.

  So please tell me that

  How can I use the two RAM slots?

  

  (Task Manager)

  

  (My computer properties)

  Unplug ALL power - then remove the memory - and then put back them in (this process
  is known as the relocation and will help if there is corrosion or other question contact). If it's been
  contributes not to remove both once again put the one who was in the second slot in the first location to
  see if it actually works. If this does not work, you have a bad memory module. If so, put the
  another return to the second slot. If it works the problem solved. Otherwise you may have a bad
  memory slot so trying combinations using other passers-by.

  How to reinstall a desktop memory Module
  http://pcsupport.about.com/od/fixtheproblem/SS/reseat_memory.htm

  Reinstalling your RAM, graphics card and hard drive
  http://www.YouTube.com/watch?v=DLxNPBQBfT8

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Portege R700: Cannot use the two SVGA HDMI on the Port PA3838E-1PRP Port Replicator

  Dear all,

  I have a Portege R700 series (PT311E) and a high speed P/N PA3838E-1PRP port replicator.

  Today, I tried to connect two external monitors on the VGA port and the second HDMI port replicator port.
  Unfortunately, I was not able to configure the laptop / duplicator to * work with external monitors stand *.

  Do not work in this way portable stand and port replicator becomes useless.
  Although it is a default installation on other products manufactured without drivers and special parameters will be needed, I hope that in our case a key combination or a driver may resolve this problem.

  To be even more precise, I don't want to also use the laptop screen. I want to just connect laptop closed and turned off in the duplicator, to turn on the laptop the power button of the port replicator and to have the image on two external monitors.

  Thank you for your quick responses,

  Best regards

  Cristian

  Hello

  What R700-xxx you have exactly?

  How to connect two monitors? Are the two monitors connected only to the Port Replicator or is one of the monitor connected to the laptop and the other monitor is connected to the duplicator?

  Could you please post this?

  I'm not quite sure of HDMI and Port Replicator (PA3838E-1PRP) but many laptops equipped with support DVI dual video output (VGA and DVI) port using Advanced Port Replicator III (PA3314E-1PRP) or Advanced Port Replicator III more (PA3474E-1PRP).
  But this is only possible if the laptop itself supports the simultaneous use of RGB & DVI too.

• How can I connect HDTV and LCD to PC using the two - as a dual monitor.

  I recently bought the PC HP Pavilion a6600f w1707 with HP. I also bought a DVI cable to HDMI to connect PC to Samsung HDTV. I can use the VGA cable to connect the monitor and cable DVI to HDMI to connect to HDTV, but log off for the other use. Is it possible to configure Windows Vista Home Premium to display on both screens at the same time, or at least be able to switch between the two without having to unplug one, then restart the computer?

  This can be annoying, but I've done it before.  Usually, you can connect at once, then go to the display panel, settings, advanced, and then there is usually a tab to select the components of the video card.  Mine says NVIDIA...  Once there, you can choose a number of options, for example, clone, extended desktop, etc..  I found that there is some problems with resolution when the display on my TV is over the current screen.

• Use the two CAN API

  Hello

  I develop an application that communicates with a microcontroller.  I would like to use the API to frame for a setup where I can send commands and get the answers and want to use the API channel for a mode where I'm simply followed the messages I get from the microphone.

  I have a state machine where I starts with the opening of the frame API, have some different States I'll in that use the appearance of the request/response of the API framework, then a State that closes to the API of frame and opens the Channel API.  The problem I encounter occurs when I already closed the frame API and began playing with the API channel work.  When I click the monitoring button stop, I leave the while loop, who read a message defined in the DB can (havn't had in fact he still read the data) and run the Clear.VI Channel API CAN I get the following error.

  Error - 1074388720 CAN Initialize.vi

  Possible reasons:

  NI-CAN (Hex 0xBFF62110) you can use the frame API and Channel API simultaneously on the same interface (for example CAN0).   MAX tools use the channel API.  Soultuon: Use a different interface with each API.

  I need a way to get around this and I'm not sure why the raster API is not pretending to be closed, especially since I was a State in my state machine to close the frame API before you start using the channel API.

  If anyone has any suggestions please let me know.

  Thank you

  Gary

  

  It is more a question LabVIEW but because its you, here's an example that lets you switch back and exit if you set the output check.

  DirkW

• Using the two connections of cable and wireless on a laptop Windows 7

  I have a wireless router on my home network, which works very well.  Sometimes, I connect my laptop with a wired connection for faster speed during file transfer.  When I do that, I have 2 network connections: Wi - Fi and wireless.  Should I disconnects me wireless connection, or is it possible to have both connections at the same time?  Is it possible to configure Windows 7 to disconnect the wireless when it detects a wired connection?

  Thank you.

  It's OK to have two connections.  Windows automatically uses the one with the highest rated speed.

  I don't know how to have it automatically disconnect one of them. Steve Winograd, most Microsoft Valuable Professional (desktop experience)

• Using the two PB 2.0 + SDK &amp; BB10 Air SDK in Flash Builder 4.6

  Hello

  Any of you have experience creating applications using the PB2 + and BB10 Air SDK in Flash Builder? How do you change the build configuration between two SOFTWARE development kits? So let's say you make apps for Playbook and at the same time you are doing apps for BB10...

  Where do you set your IDE with these settings?

  Looking forward to your answers.
  

  There is essentially only one way to do it: you first install the 2.0 + SDK, then the BB10 Beta SDK. This is how you make sure that you have the data of these two software development kits installed on your pc. The Flash Builder plugin will be the BB10 sdk.

  I tested some of the components of the SDK BB10 on PlayBook OS 2.0.1. Needless to say that some features are not supported.
  Note: When I talk about libraries and 'ane's, I mean those provided by the SDK BB10. The following findings are valid with a pre-BB10 PlayBook OS 2.0.1 is the last one I think. PlayBook OS 2.1 can be considered BB10, although some features don't work there either.
  Here's what I found: you can use fuse controls, but the classes in the package "qnx.fuse.ui.dialog" do not work because the classes in the package "qnx.fuse.ui.window" do NOT work.
  You cannot use "QNXDevice.ane" because "NavControl" class which is indispensable to the actions of the bezel does not work and the notifications do not work either.
  If you use "fuse" components, you must also use 'QNXSkins.ane '.
  The "QNXLocale.ane" does not work. 'QNXNetwork.ane' no test however. The framework of the call does not work.

  Phew, that was some writing. If I missed something or you have any other questions, feel free to ask.

• 2602 AP in stand-alone - using the two bands

  We generally use the series 2602 AP in light mode, however I have a scenario where we will install one with the stand-alone software.  I understand that we will not be able to utilze certain features that you get with the WLC as RRM, unreliable detection and clean air.

  We want to utilze the 5 GHz and 2.4 GHZ bands.  To do this with the autonomous access point 2602, will we have to set up 2 separate SSID?  I really don't want to do this if I don't have to minimize confusion for customers. Thank you.

  This decision is based on the client machines.  The device will choose who it will associate with.  You could always tweaking the settings on the device wireless to a single band favorite on the other.  There isn't any setting on the AP have devices prefer one over the other.  I hope this helps.

  Thank you

  Scott

  Help others by using the rating system and marking answers questions as 'response '.

• Windows XP do not use the two virtual processors

  I have created a virtual machine in Fusion 2.0.4 (on a MacBookPro (end 2006) running 10.5.7), assigned two CPUS and install a new copy of Windows XP Edition family in it (do not use the automatic installation provided by Fusion). After completing the installation, I booted up and noticed that only one processor showed in the Task Manager, despite two of them showing in Device Manager.

  I checked C:\WINDOWS\system32 - ntoskrnl.exe is correctly ntkrnlmp.exe, ntkrnlpa.exe is ntkrpamp.exe and hal.dll is halmacpi.dll - so I don't see a reason why XP would not see the other CPU.

  Any ideas? Reinstalling XP does not help. I have attached a copy of my VMX in case this is useful.

  Windows XP Home Edition does not support a single socket.  In order to avoid interrupting other products license restrictions, we present only single core CPU at the prompt.  A dual vCPU VM is presented as two-processor core for Windows XP Home Edition only uses the first processing company.  Windows XP Professional clients will see two CPUs in the Task Manager.

• How to use the two JS attributes in the single column

  Hi friends,
  
  I have a tabular presentation. For that column, I need to display the content of this column in the justified way right and that I gave the code below in the attributes of the element of the column
  

  style="text-align:right;"

  The above works fine I can able to print the content in the right justified.
  
  In that same column, I need to receive a computed value, and this value must only be filled with the right justified way.
  
  For this I created a function in the javascript code and called this function in the attributes of the element of this column as

  onfocus="calculateNet(this);"

  But how can I appeal the two encodings in the same attribute of the element in the column in a table.
  
  I tried giving as specifying the comma between the two, but none of this is taken, what can be the problem and how can I able to give both in the same section of attribute of the element of the column in a table.
  
  Brgds,
  Mini

  Hello Mini,

  first of all, you have only a single javascript call (onfocus...). It is just a style and has nothing to do with javascript.

  Try this:

  style="text-align:right;" onfocus="calculateNet(this);"
  

  Kind regards
  Dirk

• MacBook Pro 15 "cannot use the two fell in love at the same time

  I am trying to connect to three external displays to my Macbook Pro 15 "."

  Connect a monitor to the HDMI and the other two to love at first sight.

  Only two monitors will give me a picture.

  If I disconnect monitor work, one that was not working will start working.

  I can change the ports between monitors and work always only two monitors.

  I can open my Macbook and the inbuild screen working as a third screen.

  But the external screens appears only two at a time.

  Why is this?

  I use El Capitan.

  I tried the "Display search" function in settings.

  I also tried to restart.

  I also tried to unplug power for screens cables.

  It does not support the three external displays.

  https://support.Apple.com/kb/SP719

  "Support simultaneous native resolution on the built-in display and up to 3840 x 2160 pixels on up to two external displays, both at millions of colors."

• When you use mail, my resizing button and my arrow down into the bar side schroll appear in the same position using the two impossible.

  It lacks a line at the bottom of the screen just above the dock on my macintosh window. Using Mac OS X, version 10.6.7

  Help if bring you up the module bar?

  View > toolbars > toolbar Add on