Tried to install Trend Internet Security program, error message, necessary for the installation of Visual C ++ 2005
When installing Visual C received then Error 1935' Microsoft. VC80. Open MP type = "win32policy", processor version 8.0.50727.762 Architecture = "x 86".
Running Windows Vista 32-bit - I'm no guru IT but can generally follow clear instructions - can anyone help?
Sorry for the delay in publication.
Look at the following information about the Error 1935.
This error can occur when the Microsoft .NET Framework installation on the computer is damaged or is missing.
Try it out below step to reinstall and repair installation of Microsoft .NET Framework on the computer, then check if you can install the software.
(a) click the Start button, select Control Panel, click programs and then click on 'Turn Windows has or not.' If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
(b) search for Microsoft .NET framework 3.5.1 uncheck, click OK and restart the computer.
(c) after the reboot, open again "Turn Windows features on or off" and place a check next to Microsoft .NET framework 3.5.1 and restart the computer.
If the previous step fails, then I suggest that you manually download and install Microsoft Visual C++ 2005 Redistributable Package, and check if you can install the software. Be sure to download the correct version, if your computer is 32-bit or 64-bit.
Microsoft Visual C++ 2005 SP1 Redistributable Package (x 86)
Microsoft Visual C++ 2005 SP1 Redistributable Package (x 64)
I hope this helps.
Internet security Windows 7 does not allow the installation of the update of Flash Player 17. I tried the direct installation using the IE_AX update without success.
The procedures described in the last link enabled the update of Flash Player be downloaded and installed.
It is regrettable that Windows IE seen Adobe as being an unreliable Site and requires a temporary user disable the security settings for the update to proceed.
Thank you for your help.
Original title: Problems installing Trend Micro 2012
Tried to install Trend micro on my laptop, and towards the end of this way the message; "Your computer meets all the installation requirements, so the installer must stop." appeared. He then read "Windows update," I clicked on the link and also called microsoft who gave me the link updates from SP1 to SP2. I did (ran for almost 2 hours!) and recorded. I then checked the edition of windows under system and it has not saved the update even if it is registered and installed to my files. Tried to do the foregoing twice, still the same problem. Rang Dell and they sought to find an answer to the problem, but did everything they could. Still no answer to the problem after all. I have Windows Vista Home Basic as my operating system and installed Trend micro in the past with no problems. (Not sure if the following has nothing to do with it, but thought it might be useful a mention). I changed to Microsoft Office 2007, which has already been installed on my laptop for Office 2003, because I found it difficult from the laptop to the desktop and I didn't really want to pay for the upgrade of my office, if I didn't need it.
You need to install Trend Micro Titanium 2012 Vista SP2 or later version
I suggest you follow these methods and check.
Determine if SP2 has been installed or not?
To see if the update has been installed, review the installation history
To view the history of installation, follow these steps:
a. click Start, point to all programsand then click Windows Update or Microsoft Update.
b. click view update history.
c. find the latest entry for the specific update.
d. If the entry shows the success in the status column, the update has been installed. If it says pending in the status column, the update is not installed.
Post back with the history state of Windows update, mistakes, if there is.
If the update is successful, if it does not show in system properties run System File Checker tool.
To do this, follow the steps in this link:
Follow the steps in this link: http://support.Microsoft.com/kb/929833
In the meantime, you can check this link for the required components, that you must take to install the Vista SP2. Learn how to install Windows Vista Service Pack 2 (SP2)Also these return these items:
Troubleshoot installing or uninstalling programs
How to solve problems when you install or uninstall programs on a Windows computer
I hope this helps!
I tried to uninstall the program using the uninstall/change function, but it is not on the list of the programs installed on my computer. And I just removed Norton Internet Security. The only time that McAfee was on the computer was a trial, when we arrived the computer first. Help, please
Download and run the tool removal of McAfee at the above address.
See you soon. Mick Murphy - Microsoft partner
Hi, I have really not much about computers, I'm sorry. I tried looking for answers myself but I do not understand much of the language and I don't know if I read the appropriate information.
I wanted to update my iTunes on my computer (Windows XP) but it doesn't seem to work when I searched for upgrades and click Yes, I want to update. Nothing happened.
So I uninstalled my iTunes and I tried to install iTunes 10. But when I did, I got an error message with the title of iTunes + QuickTime... say... couldn't access network location \common files\.
I uninstalled QuickTime, hoping that would help, but of course not knowing what I was doing. It did not help.
What I Googled, it seemed I had to look at something in the term. I arrived at the spot but have not seen any obvious errors. But then again, I had really no idea what I was looking at!
I would really appreciate if someone could help me with a language very very basic.
Thank you very much.
It is a Forum Vista, not XP one, maybe you should try this Forum because there will be more applicable to your operating system.
See if these items are easy to follow?
Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7 (also for the links of XP).
Internal error: failed to get the path of the file directory common 64-bit
If you read the link above here is a relevant .jpg of XP
Have you tried the Itunes forum to see if there are similar stories there?
iTunes for Windows
is there anyway that Firesheep works with Firefox 7.0.1? The exact error message I received is lower in quotes.
"Firesheep could not be installed because it is not compatible with Firefox 7.0.1.".
Versions of Firefox 4 + is not supported.
I get an error message during the installation.
Could you please send full error you get?
In addition, please visit this link that addresses the problems installing Acrobat DC on Mac: problem installing Adobe Acrobat Pro DC on my mac
I received an update for security update for Microsoft Visual Studio 2010 (KB2542054) and the security update for Microsoft visual studio 2008 Service Pack 1 (KB 2538241). This updates have been detected by windows update on my laptop. However, when I tried to install these updates, they detect an error code 80200053, windows update encountered an unknown error. I need help with this ASAP. Thank you.
You can read the following article and try to reset the Windows Update components and check.
How to reset the Windows Update components?
You can also check the links below and try to download and install the stand-alone package with updates:
Hope this information is useful.
I tried to restart my computer, but that is not helping. Any help would be great, that I made plans for work and school I need to finish.
Please see the links below.
- Error: "cannot install initialize | Windows
- The Adobe CC Installer failed to initialize [windows OS]
- I'm having trouble trying to install the trial cc version. The installation program is unable to initialize. Please help me
- Creative cloud Installer fails to boot into OSX Mavericks
Hope this will help you.
Installation stopped saying: System Quicktime QT / core resourses video corevideolocalizd.qtr error. I tried to follow the itunes help, delete the temp files (I can not remove the vgx5c.tmp or vgx1a7.tmp) uninstalled products apple in order, reinstalled. ITunes Installer stops at the same place. I can find the corevideolocalized.qtr file, but cannot delete it. So I can't install itunes because I can't load quick time. I tried to install just one quicktime, that the same error comes back. Any help would be useful, thanks... Duane
Original title: .net framework 4.6
I try to install the software and I get an error message saying
Setup cannot continue because a previous installation requires your computer must be restarted. Restart your computer and run the Setup again.
so I restart my pc and run it again and the same message appears
Try to perform a "clean boot" to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you start Windows, install a program or an update or when you run a program in Windows.
Perform a clean boot to determine if background programs are interfering with your game or other programs
One by one add back an application both in the boot list to find the software application incriminated.
J W Stuart: http://www.pagestart.com
Original title: Command and Conquer Generals error? Some one care to help?
So now I'm a little disappointed in how things are going right now.
I had Command and Conquer Generals before and I used to read. Bug of the game problems are forcing me to remove it. To make things worse, my PC has been infected with malware/spyware that sneak their way inside my C & C Generals App. I did a full scan using Spy Bot Search & Destroy alongside with MalwareBytes Anti-Malware.
Then, I tried to re - download and installed a CLEAN one. However, when it loads the classic C & C Splash Screen(the loading page that appears before the game turns into a full screen app), another windows appears and displays this:
"Sorry, a serious error has occurred."
After the application closes, and happens whenever I start the game.
Can someone help me?
I don't know what's happened since she was working before.
I do weekly maintenance using Auslogics Boost Speed 5 and Systweak Advanced System Optimizer 3.
Microsoft Windows XP SP3
Intel Pentium IV CPU 2.00 GHZ
Radeon 7000 / Radeon VE Family (Microsoft Corporation)
Every effort to answer my question will be much, much, much appreciated!
I'll make sure that you have all the patches that are underway for the game Command and Conquer Generals.
If you have access to a library and a flash drive, you can download Microsoft Security Essentials or any other antivirus disk analysis software and then install on your computer even if you do not have access to the internet.
This will help make sure that you have cleaned your computer properly.
A system restore back to a point in time so if you have installed all new programs since the date of the restoration of the system, you won't have any more of these programs installed.
I don't know any other software in system restore, but you can do a search on the internet, however, they can only restore from when their software is installed.
I hope this helps.
Automatic update of MSO Outlook 2007 to the e-mail filter spam (KB977839) has always failed.
Automatic update is due to the update that above.
Error code 646 appears each time I tried to install the update.
Try this 1st to see if it helps, and it should:
Description of the Patch registration cleanup tool
If necessary :
Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
or the update itself - double click a view more information (or click top then discovers on the right)
Those who will take you to a page where you can download the update.
Or go here and the KBxxxxxx number to download it.
Download Center - mount the KBxxxxxx.
Microsoft Download Center
Download - SAVE - go to where you put them - click on - RUN AS ADMIN
Then you can right click on the update in the updates Windows and HIDE.
If you get an error Installer install this version:
Windows install 4.5 Redistributable
Then run this:
How to reset the Windows Update components? -a Mr Fixit
Description of the system for Windows Vista, Windows Server 2008, update tool and
for Windows 7
Because these are all Office updates you might get more information if necessary in the Agency of those groups that
may have experienced the same problem.
If necessary you can incident free get reports however the above should take care of it for you.
Windows updates - free Incident report
Go here and click on-> Windows Update fails while searching, downloading or installation of updates
The security updates, you can get free support Incident report
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
I currently have a HP g4 with an AMD Phenom x 2 p650 (64-bit) 4 GB of ram and a 500 GB HARD drive. It has windows 7 Home premium on it, and I'm double starting with windows XP. However, whenever I insert the windows XP disk it says:If this is the first time you've seen this stop error screen, restart your computer. If this screen appears again, follow these steps:Check for viruses on your computer. Remove any newly installed hard drives or disk controllers.check hard drive to ensure that it is correctly configured and completed. Run chkdsk /f to check for hard drive corruption, and then restart your computer.Technical informationSTOP: 0x0000007B (oxF78D2524, oxc0000034, 0x00000000, 0x00000000)I tried the 32 bit and 64 bit and followed the instructions above.
I suggest you follow the link to fix the problem and check if it helps:
Error message "STOP 0x0000007B" when you restart your Windows XP-based computer
Reference: Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP
Original title: vista stop working
I need help on vista, because I update and restart and stop working and appear this error code:
!! 0xc012001d! Registry\Machine\Components\DriverData...Hello
1. remember the number of the update you have installed?
2. could you give us the exact error message?
3. Once you get this error message? Are you able to boot to the desktop?Method 1.
Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-Microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.
a. restart your computer.
b. when the computer starts, you will see your computer hardware are listed. When you see this information tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
c. using the arrow keys, select the desired option of Mode without failure.
d. press the Enter key on your keyboard to start in safe mode of Windows Vista.
e. when Windows starts, you will be at a typical logon screen. Connect to your computer and the Windows Vista goes into safe mode.
f. do whatever tasks you need and when you are done, reboot to return to normal mode.
If it works fine in safe mode try performing a clean boot in order to find the cause root.
See the article below for instructions on how to start your computer in a clean boot state.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
Best thing you can do is to perform a system restore just before where the problem occurred.
I have listed a few articles that explain the system restore in Windows 7.
System Restore: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questionsThus, the article above is applicable to Windows Vista.I hope this helps.
Thank you, and in what concerns:
Shekhar S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
Maybe you are looking for
Over the past two days my emails come back in the Inbox when I got them deleted. I tried to screw them up as well, but after 5 minutes they all pop up again
Dear community, The proud owner of a L350, this weekend.Since then, trying to make wireless connections to my Linksys WRT54G Router. Still no luck. I don't see the SSID on the radar, but for some reason, that my laptop computer does not receive the c
I have a HPE 570 T where exploitation would not start this weekend. I got this computer a year and change. I couldn't do it via safe mode and Windows 7 Startup Repair won't work. I was able to reimage the hard drive and I was about one hour and wa
OfficeJet Pro 8600 more 10.8.3 OS iMac I want to change the value print factory set in the default print setting. I want the documents I send to the printer via AirPrint to print in black and white, not color. But the 8600 by default is always color.
I'm curious to know how the names of package in a native BlackBerry Java application are exposed to other applications or the operating system. I know, for example, classes persistables but be only defined, otherwise you will get ' MyApplication sta