Trigger DAQ via main Vi

Similar Questions

• SGE2010 how to trigger backups via SNMP?

  Hello

  I've tried, so unsucessfully, to trigger backups on our switches SGE201 TFTP server. I have backups testesd TFTP through the web interface, and who does not. I need SNMP as I need a method for trgiger scriptable backups on a regular basis. I run the query SNMP from a RedHat Linux server. So far, I have the following query worked, but it is a failure:

  snmpset - v - 1 c COMMUNITY SWITCH. MGMT. JPM ADDRESS 1.3.6.1.4.1.9.6.1.101.87.2.1.7 I have 2 1.3.6.1.4.1.9.6.1.101.87.2.1.8 I have 3 1.3.6.1.4.1.9.6.1.101.87.2.1.9 has TFTP.SERVER.IP.ADDRESS 1.3.6.1.4.1.9.6.1.101.87.2.1.11 s 1.3.6.1.4.1.9.6.1.101.87.2.1.17 FILE name I have 4

  The error I get is generic, and the same query failed on several switches operating the 3.0.0.18 software. The switch is set with the community having full access from the IP address of the SNMP-admin server.

  If someone here was able to run SNMP triggers backups and would be ready to post their query and/or software that would be greatly appreciated. Any other suggestions, comments or tips are also welcome. Thank you for your time.

  Jeff,

  The procedure to download or update the config via SNMP is as follows:

  (1) download the MIB files that we officially freed from cisco.com

  http://www.Cisco.com/Cisco/software/release.html?mdfid=282414069&flowid=3650&softwareid=283415684&release=3.0.0&relind=available&rellifecycle=&RelType=latest

  (2) compile the MIB on MIB browser in format for example MG-SOFT, Kortright. Make sure that there is no error in compilation.

  (3) configure SNMPv2 or SNMPv3 accordingly on switch SGE2010

  (4) search for the CISCOSBCopy.mib file.

  The OID is SNMPv2 - SMI:enterprises (1.3.6.1.4.1) .cisco (9) .otherEnterpise (6) .ciscosb (1) .odm1 (101). CISCOSBCopy (87)

  With the help of rlCopyTable (2), create a new entry on this particular table:

  a. rlCopyRowStatus: 4 (createAndgo)

  b. rlCopySourceLocation: 1 (local)
  c. rlCopySourceIpAddress: 0.0.0.0

  d. rlCopySourceUnitNumber: 1
  e. rlCopySourceFileName: (empty)
  f. rlCopySourceFileType: 3 (config startup), 2 is for execution of config

  g. rlCopyDestinationLocation: 3 (tftp)
  h. rlCopyDestinationIpAddress: 192.168.10.22 (ip address of the tftp server)

  i. rlCopyDestinationUnitNumber: 1
  j. rlCopyDestinationFileName: 0 x 61: 62:63 (in hexadecimal, abc)

  By doing this, it should be able to backup startup config devices unit to remove the tftp server.

• Trigger via exported RTSI1 signal

  Hello

  I have four PCIe6535s and synchronizing with 'sample clock' and 'start trigger' exported via the RTSI line 7 and 1 respectively of one of the rooms, operating in the Master configuration (4) Slave (1-3) with the last Board of the clock and release of the shipment.

  The trigger fires 3 - 5 times on all the boards and then only the master card will trigger and others will not trigger.

  I've also seen when one or two fires and the rest won't.

  Because the captain still fires, may not be the trigger signal quality, but something at the level of the RTSI.

  Where can I find and where to search them?

  Thank you

  OK, found the problem.

  The last Board being display the sample clock, the boards of three slaves from time to time failed at the end of the buffer full (a short sample).

  Now, the solution is to configure the slave clock to use an example less for the output data. The buffer will be short a sample, but at least all the tasks are completed.

  However, it would be nice if the error indicates that the buffer and the sample clock have incompatibility, I would save a day.

• Clock and hw external trigger with USB-6210 on Linux with NOR-DAQmx Base?

  I have two devices USB-6210 I need to synchronize so that they both collect data exactly at the same time. I was told by support OR I can send the clock off Dev1/PFI4 and have the two USB-6210 s read the clock in through their own PFI0. I also want to trigger data collected for each device by sending a trigger off Dev1/PFI6 and have two devices to receive the signal on PFI2.

  All my attempts to try this are filled with error messages and my research online seem to say that's not possible with USB devices on NOR-DAQmx Base 3.4.0f2 on Linux.

  I "ve tried using example AI programs and those who do not seem to work either for external clocks. Here is the code I tried:

  #include "NIDAQmxBase.h"#include 
  
  #define DAQmxErrChk(functionCall) { if( DAQmxFailed(error=(functionCall)) ) { goto Error; } }
  
  int main(void){    // Task parameters    int32       error = 0;    TaskHandle  taskHandle = 0;    char        errBuff[2048]={'\0'};    int32       i;
  
      // Channel parameters    char        chan[] = "Dev1/ai0";    float64     min = -10.0;    float64     max = 10.0;
  
      // Timing parameters    char        clockSource[] = "/Dev1/PFI7";    uInt64      samplesPerChan = 1000;    float64     sampleRate = 10000.0;
  
      // Data read parameters    #define     bufferSize (uInt32)1000    float64     data[bufferSize];    int32       pointsToRead = bufferSize;    int32       pointsRead;    float64     timeout = 10.0;
  
  printf("Calling CreateTask...\n");    DAQmxErrChk (DAQmxBaseCreateTask("",&taskHandle));printf("Calling CreateAIVoltageChan...\n");    DAQmxErrChk (DAQmxBaseCreateAIVoltageChan(taskHandle,chan,"",DAQmx_Val_Cfg_Default,min,max,DAQmx_Val_Volts,NULL));printf("Calling CfgSampleClkTiming...\n");    DAQmxErrChk (DAQmxBaseCfgSampClkTiming(taskHandle,clockSource,sampleRate,DAQmx_Val_Rising,DAQmx_Val_FiniteSamps,samplesPerChan));printf("Calling StartTask...\n");    DAQmxErrChk (DAQmxBaseStartTask(taskHandle));printf("Calling ReadAnalogF64\n");    DAQmxErrChk (DAQmxBaseReadAnalogF64(taskHandle,pointsToRead,timeout,DAQmx_Val_GroupByChannel,data,bufferSize,&pointsRead,NULL));
  
      printf ("Acquired %d samples\n", pointsRead);
  
      // Just print out the first 10 points    for (i = 0; i < 10; ++i)        printf ("data[%d] = %f\n", i, data[i]);
  
  Error:    if( DAQmxFailed(error) )        DAQmxBaseGetExtendedErrorInfo(errBuff,2048);    if(taskHandle != 0) {        DAQmxBaseStopTask (taskHandle);        DAQmxBaseClearTask (taskHandle);    }    if( DAQmxFailed(error) )       printf ("DAQmxBase Error %d: %s\n", error, errBuff);    return 0;}
  

  When I run the resulting program, I see this:

  $. / acquireNScans-ExtClk
  The CreateTask call...
  Call for CreateAIVoltageChan...
  Call for CfgSampleClkTiming...
  Error-89136 DAQmxBase: route specified cannot be satisfied, because the hardware does not support it.

  For example, a clock and a trigger can be imported via one of the PFI lines by using a USB-6210 on Linux with NOR-DAQmx Base? A clock and a trigger exportable via one of the PFI lines?

  If so, does anyone have the code example illustrating how to do this, or can you at least tell me the names of the lines ("PFI0/Dev1" or other) so I can try again?

  Clues or suggestions would be helpful.

  Thank you

  -Tom

  The clockSource in the example specifies an output rather than an input channel channel. Change source "/ Dev1 / PFI0" solved the problem.

  Please close this post.

• no error, but nothing shows up - function main wrong?

  Hey, I'm compiling this program and I have no error but the applet shows, then disappears without showing anything! It should show 2 clocks!

  import java.awt.*;
  import javax.swing.*;
  import java.util.*;
  
  public class StillClock extends JPanel {
    private int hour;
    private int minute;
    private int second;
  
    public static void main( String arg[] ) {
          StillClock SC = new StillClock(4, 20, 45) ;
          StillClock SC2 = new StillClock(22, 46, 15) ;
      }
  
    /** Construct a default clock with the current time*/
    public StillClock() {
      setCurrentTime();
    }
  
    /** Construct a clock */
    public StillClock(int hour, int minute, int second) {
      this.hour = hour;
      this.minute = minute;
      this.second = second;
    }
  
    /** Return hour */
    public int getHour() {
      return hour;
    }
  
    /** Set a new hour */
    public void setHour(int hour) {
      this.hour = hour;
      repaint();
    }
  
    /** Return minute */
    public int getMinute() {
      return minute;
    }
  
    /** Set a new minute */
    public void setMinute(int minute) {
      this.minute = minute;
      repaint();
    }
  
    /** Return second */
    public int getSecond() {
      return second;
    }
  
    /** Set a new second */
    public void setSecond(int second) {
      this.second = second;
      repaint();
    }
  
    /** Draw the clock */
      @Override
    protected void paintComponent(Graphics g) {
      super.paintComponent(g);
  
      // Initialize clock parameters
      int clockRadius =
        (int)(Math.min(getWidth(), getHeight()) * 0.8 * 0.5);
      int xCenter = getWidth() / 2;
      int yCenter = getHeight() / 2;
  
      // Draw circle
      g.setColor(Color.black);
      g.drawOval(xCenter - clockRadius, yCenter - clockRadius,
        2 * clockRadius, 2 * clockRadius);
      g.drawString("12", xCenter - 5, yCenter - clockRadius + 12);
      g.drawString("9", xCenter - clockRadius + 3, yCenter + 5);
      g.drawString("3", xCenter + clockRadius - 10, yCenter + 3);
      g.drawString("6", xCenter - 3, yCenter + clockRadius - 3);
  
      // Draw second hand
      int sLength = (int)(clockRadius * 0.8);
      int xSecond = (int)(xCenter + sLength *
        Math.sin(second * (2 * Math.PI / 60)));
      int ySecond = (int)(yCenter - sLength *
        Math.cos(second * (2 * Math.PI / 60)));
      g.setColor(Color.red);
      g.drawLine(xCenter, yCenter, xSecond, ySecond);
  
      // Draw minute hand
      int mLength = (int)(clockRadius * 0.65);
      int xMinute = (int)(xCenter + mLength *
        Math.sin(minute * (2 * Math.PI / 60)));
      int yMinute = (int)(yCenter - mLength *
        Math.cos(minute * (2 * Math.PI / 60)));
      g.setColor(Color.blue);
      g.drawLine(xCenter, yCenter, xMinute, yMinute);
  
      // Draw hour hand
      int hLength = (int)(clockRadius * 0.5);
      int xHour = (int)(xCenter + hLength *
        Math.sin((hour % 12 + minute / 60.0) * (2 * Math.PI / 12)));
      int yHour = (int)(yCenter - hLength *
        Math.cos((hour % 12 + minute / 60.0) * (2 * Math.PI / 12)));
      g.setColor(Color.green);
      g.drawLine(xCenter, yCenter, xHour, yHour);
    }
  
    public void setCurrentTime() {
      // Construct a calendar for the current date and time
      Calendar calendar = new GregorianCalendar();
  
      // Set current hour, minute and second
      this.hour = calendar.get(Calendar.HOUR_OF_DAY);
      this.minute = calendar.get(Calendar.MINUTE);
      this.second = calendar.get(Calendar.SECOND);
    }
  
      @Override
    public Dimension getPreferredSize() {
      return new Dimension(200, 200);
    }
  }

  Edited by: Christopher on May 28, 2011 03:05

  How do you run that? If you run it as a normal program via main(), I expect that it ends when the hand ends.

  You are creating two JPanels but does not create a window frame/for they appear in. If you try this

  JFrame frame = new JFrame();
  frame.setLayout(new FlowLayout());
  frame.add(SC);
  frame.add(SC2);
  frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
  frame.pack();
  frame.setVisible(true);
  

  You will see a window with your clock in them.

  Published by: Peter Lawrey may 28, 2011 12:40

• Is there any way of Audio loop using Commons to edge?

  Hello

  I get on really well using Commons of edges to add audio to my animations (fantastic piece of kit, by the way - thanks simonwidjaja!).

  However, during playback of a sound through the trigger EC. Sound.Play ("mySound"); works brilliantly for the individual instances of sound I totally failed to find a way to get audio files to complete.

  I've been struggling with this for an age now and really have not got anywhere at all. I know Commons of edge incorporates SoundJS and I know that SoundJS offers a possibility of audio loop but I don't see a way to get there via the common edge script.

  Method of the SoundJS seems to be formulated as:

  static SoundInstance play (interruption, delay, offset, loop, volume, pan, value)

  And in the municipalities of edge I can find:

  var instance = SoundJS.play (soundId, SoundJS.INTERRUPT_NONE, 0, 0, false, 1);

  which I assume (maybe wrongly?) refers to the SoundJS above.

  I'm guessing (as has been mentioned by resdesign in another post) that I need to change the following, which appears in the creation complete, in order to make loop happens, but I can't seem to get something that I try to work.

  {src: assetsPath + "mySound.mp3 | ' + assetsPath + 'mySound.ogg', id: 'mySound'},

  Of course, I just might be wrong altogether; so as always, thoughts and ideas are very welcome x

  Hi Emmy,.

  1. can I use buzz to create sounds in compositions of edge for the ipad?

  Yes. Although there are always the MASSIVELY boring question in which iOS insists on a user-push to activate the game of any audio device. Statement from Apple is that users shouldn't worry forced to download audio not requested which may eventually cost them if they are on a 3G connection paid; so they actually turned off anything that is, or could be described as a function of AutoPlay. This means that instead of being able to include automatic playback of the audio - to make, say, a soundtrack automatically start playing when the animation begins - reading of the said track rail must be user-initiated.

  For example, the code: sym.getComposition (.getStage ()). YourSoundName.play (); would need to be placed on a clickable button as opposed to a trigger on the main timeline or timeline of the any of your symbols.

  In essence, you will need to provide the user the opportunity to confirm that "yes I want to hear it.

  While the feeling behind not wanting to only users of unjustified expenditure is understandable (and commendable) whole concept is a huge pain for animators and a total joke-killer and the best. Think about it regarding underwear man on Bananaskin... instead of users automatically perfectly be able to hear a comedian associated with "whoooooop" sound, they must click on a button to do it. 'You want to hear a funny noise associated with this bit of staging? Click here for Yes'. Obviously there is not actually such a question in reality couch, but you get the drift (The Death Of Fun!). As a 'semi' you can try experimenting with the triggers of mousing on invisible buttons.

  2. users will need internet access to hear sounds each time?  In other words the sounds do not have to be called from an external source every time they are played, or are part of the exported file and therefore only once downloaded.  (I understand that Ihave to manually register the audio file in the file exported from edge).

  Not quite sure of it that I ended up working on completely different things; so don't continue Apple troubles long enough to learn more.

  3. can I use my own mp3 sounds and if so, how?

  If you want to say, you can use the mp3s that have not appeared on you (i.e. iTunes titles etc) so basically not. Not unless they are free of copyright/rights or if you have obtained a license to use them.

  If by your own mp3 sound you mean audio you have from yourself, then Yes, of course

  It makes sense to produce an MP3 and ogg for each sound version, in order to ensure maximum compatibility with respect to the reading of the user. Other than that, just name your files, put them in a folder named "audio" (for example) and then, in 'CompositionReady' to Edge, add the following code for each sound (by changing the names accordingly):

  sym. YourSoundName = new buzz.sound ("audio/YourSoundName", {format: ["ogg", "mp3"]});

  sym. YourSoundName.bind ('loadeddata', Function {}

  var point = Edge.getComposition (compId) .getStage ();

  });

  Then whenever you want to play a certain sound just use: sym.getComposition (.getStage ()). YourSoundName.play (); on a trigger.

  Hope this helps

• Links of history is no longer open automatically when selected. Running 33.0 (beta channel); is there a known fix or am I stuck with troubleshooting in safe mode? :\ TNX!

  Additional: I searched on: config but can't find a setting that seems to apply. Am I missing something?

  Nevermind, all. In the absence of response, case closed. Gritted my teeth & solved via main strength and awkwardness.

• Can someone help me understand how the URL handlers work and how they can be used to launch AppleScripts links?

  Preface:

  -I'm not a complete noob, but Applescript is my first programming language

  -J' have been able to write scripts that are useful for a variety of tasks, but especially the interaction between the Excel and numbers

  -I consider myself to be an advanced/expert with the numbers, but not Excel

  My goal is to be able to run scripts from a link in a Numbers spreadsheet without opening a browser.  For me, a key missing numbers is the ability to create interactive buttons.  I know reading is it possible to use links in OSX to trigger scripts via URL, but all managers the explanations and instructions, I found are over my head, because they reference the definitions of programming I don't understand.   I know it's probably a very long answer.  I really appreciate the effort and promise of will not be wasted your time and your knowledge will be used for good (at least by me).

  World  thanks,

  Ash

  Google this string: Manager of URLS AppleScript.

  The first strike several include the how-to code AppleScript which should guide you on the construction and launch of a URL handler.

• RX100 firmware

  Hello. I love RX100, but I get bored really 2 options:

  (1) option for timelapse

  (2) ability to trigger camera via computer (it doesn't have to be something special for me is enough to be able to shot with gphoto2 or something similar)

  And when new firmware will be released?

  Hello

  Welcome to the community of Sony!

  This device does not have these features, and we do not have information on the publication of the next update.

  Thank you for your message.

• Count the number of rising edges in table 1 d

  Hello

  I wanted to measure the frequency of a pulse signal using a MCC DAQ via libraries ULx in Labview. I have two methods to do this:

  1. use the analog inputs:

  Since data acquisition has only 1 ADC, I use a commune VI acquisition for all channels and create a multi-dimensional array with different channels in rows 0-15. Then divide them by using the function "Array Index".  I think this split removes the parameter 'time' to the wave, since it is now a table 1 d. But I already know that there will be 1000 samples each 100 m everything I want to do now is to count rising edges using a function and divide it by the 0.1 to obtain the frequency in Hz, but I don't know how. Can anyone help?

  2. use the input frequency meter:

  Because I can't use the DAQ assistant, I have to use the CI frequency-> counter 1ChanNSamp DBL 1 d in the ULx library. There is no reference to take aid to and I do not know if this method is good. I have no way of knowing since I do not have a signal generator. In addition, it does not work so far.

  Help, please.

  Thank you!

  Thank you.

  I note in your first post it is seems to want to get readings of speed about 10 times per second. To get a resolution of 1 Hz frequency direct count you need to get at least 2500 counts in a range of counting at the highest frequency. This means that you need to have at least a second. Measures of the time are another option.

  Some preliminary calculations:

  Period at 2500 RPM = 2500 Hz is 400,000 Americans.

  Period at 2499 RPM = 2499 Hz is 400,160 to the United States.

  You need to be able to resolve a difference of 160 ns period. To do this directly requires 6.25 MHz sampling rate.  It is 25 times faster that your DAQ card can enjoy.

  What other options are there? Consider only your Information.vi extract. He uses techniques of Fourier transformation and interpolation to find the frequency of a signal. I set up a quick test VI to check this. Using a sampling rate of 10 kech. / s and 1000 samples per read (10 reads per second), it has easily resolution of less than 0.1 Hz at both ends of the range of speed and largely independent of the amplitude.  This is the way to go.

  Lynn

• Problem of HTML5 video

  Hey guys I have a problem with HTML5 video. If the video is set to autorun, it is in its very well designated area. However, if it is not set to auto-run and I have trigger play via JavaScript, it opens the video fullscreen.

  This is not my expectation. If anyone has experienced this before? How can I work around it? I tried * almost * all without success.

  Thank you.

  Device: BlackBerry Dev Alpha 10 B

  OS: 10.0.9.1675

  In short,

  video = document.getElementById("player");
  document.querySelector('#play').addEventListener('click', function () {
      if (video.currentTime === 0) {
          video.currentTime = 5;
      }
      video.play();
  }, false);
  

  An official flag in order to prevent the full-screen has been requested, but I hope that does the trick for now.

• Error on my Storm 9500 for blackBerry Smartphones

  Hi evryone,

  Hello
  I use Blackberry Storm 9500 with OS 4.7.

  For awhile, I had problems with my camera.

  I unsucceeded change my sound profile.

  I tried to click on "Set Ring Tones/alerts" every time, it didn't go anywhere.

  Same thing if I try to chacnge via main menu > options > ring tones/alerts.

  It seems like the "Set ring tones/alerts" funtion had been blocked.
  Everyone would like to share with the way to solve this problem?

  Thank you

  Hi JSanders,

  Thank you for the information.

  I tried all methods to correct the prior agreement of the problem to post my question on this forum.

  in any case, I solve the problem right once I confirmed my message, but I still have to make some additional adjustments to the device.

  It seems that the problem occure once I upgraded my OS to the latest version, even if it was recommended.

  I solve the problem of

  1 data backup using the BlackBerry Desktop Manager.

  2. unplug the unit of BB to the computer.

  3. go to the main Menu > Options > Security Options > General settings

  4. press the Menu button, then press on wipe Handheld.

  5. the device to initialize and wait for the device to restart and idle.

  6. connect the device to the computer and synchronize data.

  7. setting of parameters which is not covered by the backup process.

  8. now the machine works fine.

  Once again, I thank again, you & best regards.

• Master / detail createInsert jumping required attributes validation with part delivery = true

  Hi all

  I use JDev 11.1.1.7.0

  I created master / detail on table emp dept and slipped and fell from CreateInsert in both tables.

  I put partial Submit true for these two buttons.

  Scenario: when I add a record in the master and try to add another rec, mandatory validation fires and it doesnot allow me to add new rec if already a rec void is there.

  But after adding in master, if I add a new rec in child, isn't shooting the validation of required attributes in the parent table. So a new blank record is created is in the child. ]

  If I put part delivery = false for child createInsert, fires of validation.

  Question: in my application, I set partialSubmit = true to CreateInsert child. Although I gave the partial trigger for the main table, validation of required attributes is not get fired for master.

  How to solve this? User should not be able to add a record of the child without filling out the required attributes

  
  

  
  

  < af:form id = "f1" >

  < af:panelStretchLayout id = "PSL1" topHeight = "400px" >

  < f: facet name = "center" >

  < af:panelCollection id = "pc1" >

  < f: facet name = "toolbar" >

  < af:toolbar id = "t4" >

  < af:commandButton actionListener = "#{bindings." CreateInsert1.execute}"text ="CreateInsert1. "

  Disabled = "#{!}" bindings. CreateInsert1.enabled}" id ="cb2" partialSubmit ="true"/ >

  < / af:toolbar >

  < / f: facet >

  < af:table value = "#{bindings." Var EmployeeVO1.collectionModel}"="row ".

  lines = ' #{bindings. " EmployeeVO1.rangeSize}.

  emptyText = "#{bindings." EmployeeVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." EmployeeVO1.rangeSize}' rowBandingInterval = '0 '.

  filterModel = "#{bindings." EmployeeVO1Query.queryDescriptor}.

  queryListener = ' #{bindings. " FilterVisible EmployeeVO1Query.processQuery}"="true"varStatus ="vs. "

  selectedRowKeys = ' #{bindings. " EmployeeVO1.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection EmployeeVO1.collectionModel.makeCurrent}' = 'single '.

  id = « t2 » "" partialTriggers = ": cb2: pc2:t1: pc2:cb1">

  < / af:table >

  < / af:panelCollection >

  < / f: facet >

  < f: facet = 'top' name >

  < af:panelCollection id = "pc2" >

  < f: facet name = "toolbar" >

  < af:toolbar id = 't3' >

  < af:commandButton actionListener = "#{bindings." CreateInsert.execute text}"="CreateInsert. "

  Disabled = "#{!}" bindings. CreateInsert.enabled}" id ="cb1"partialSubmit ="true"/ >

  < / af:toolbar >

  < / f: facet >

  < af:table value = "#{bindings." Var DepartmentVO1.collectionModel}"="row ".

  lines = ' #{bindings. " DepartmentVO1.rangeSize}.

  emptyText = "#{bindings." DepartmentVO1.viewable? "{'No data to display.': 'Access Denied.'}".

  fetchSize = "#{bindings." DepartmentVO1.rangeSize}' rowBandingInterval = '0 '.

  filterModel = "#{bindings." DepartmentVO1Query.queryDescriptor}.

  queryListener = ' #{bindings. " FilterVisible DepartmentVO1Query.processQuery}"="true"varStatus ="vs. "

  selectedRowKeys = ' #{bindings. " DepartmentVO1.collectionModel.selectedRow}.

  selectionListener = "#{bindings." RowSelection DepartmentVO1.collectionModel.makeCurrent}' = 'single '.

  id = « t1 » "" partialTriggers = ": cb1: pc1:cb2">

  < / af:table >

  < / af:panelCollection >

  < / f: facet >

  < / af:panelStretchLayout >

  < / af:form >

  
  

  
  

  Kind regards

  Deepti
  

  This means that it is a bug

  If you put your version Jdev or submit together partial false to get it working in the current version

  and drop a SR with Oracle Support

  Ashish

• Manually insert a fixed set of detail records in the master record is created

  Hello

  I have a requirement for the creation of several detail records manually when a new Master Record is created.  I'll use information from a few fields of primary record that is created when you create the detail records.  To do this, I put the INSERT statements in 'before Insert trigger"in the main Table (to insert records from the secondary table) . The problem arises when the trigger is trying to insert the record in the secondary table because of the Foreign Key constraint on detail record.  Since the master record is yet to be established, it will not INSERT on detail table and raises foreign key constraint violation.

  One way to overcome this is by simply creating the master record.  And in the master report, providing a button (link column) and execution of a PL/SQL procedure that creates the detail of records.

  I just wanted to know is there a way to do this when creating main drive itself?

  Here's what I defined under master table before creating the trigger-

  CREATE OR REPLACE TRIGGER bi_master_table
  BEFORE INSERT OR UPDATE ON "MASTER_TABLE" FOR EACH ROW  
  DECLARE
  v_master_pk_column NUMBER;
  BEGIN   
    IF INSERTING THEN 
      v_master_pk_column := master_pk_column_seq.NEXTVAL;
    :NEW.master_pk_column := v_master_pk_column;
  
    INSERT INTO detail_table(detail_fk_column,account_code,credit)
    VALUES (v_master_pk_column,:NEW.dealer_account_code,:NEW.invoice_value);
    END IF;
  END;
  
  

  Note: Detail table key primary value automatically filled using his own trigger and sequence.

  Thank you and best regards,

  -Anand

  Hi Anand,

  before the trigger for insertion to complete the primary key of the main table.

  CREATE OR REPLACE TRIGGER  bi_master_table
     before insert  on MASTER_TABLE
     for each row
     begin
      SELECT master_pk_column_seq.NEXTVAL INTO :NEW.master_pk_column FROM DUAL;
     end;
  /
  

  Trigger after Insert to insert the record in the detail table,

  similar to this

  CREATE OR REPLACE TRIGGER  "DETAIL_TABLE_INSERT"
  AFTER INSERT ON MASTER_TABLE
  FOR EACH ROW
  BEGIN
    INSERT INTO detail_table(detail_fk_column,account_code,credit)
    VALUES (:NEW.master_pk_column,:NEW.dealer_account_code,:NEW.invoice_value);
  END;
  /
  

  or you can implement the same writing Pl/Sql procedures without using triggers.

  Check this Doc contains example with or without the help of relaxation: https://markhoxey.wordpress.com/2013/08/20/returning-into/

  Hope this helps you,

  Kind regards

  Jitendra

• How to call the PL/SQL of EntityImpl procedure

  Hello

  I have a page that can create/update visitors. When a new customer is created themselves, a line gets inserted into the database table. I use EO for this feature.

  I need to create lines to two or three other table also when a new line is created in the main table. What is the best practice for this feature?

  The 2 options that I know:

  1 create a trigger on the main table and the appeal of trigger for inserting rows in other tables.

  2. call a PL/SQL of EntityImpl procedure after the permanent data is committed to the table. (If this is the best approach, could you please let me know how to get there)

  See you soon

  AJ

  In fact, Java Mail API is included in WLS and JDev, then you can simply add %MIDDLEWARE_HOME%\Oracle_Home\oracle_common\modules\javax.mail_2.0.0.0_1-4-4.jar to your project.

  Dario