RX100 firmware

Similar Questions

• RX100 firmware update to improve the system of AEB

  Hello

  It would be absolutely perfect if the RX100 was better exposure auto bracketing system, that allows to make more than 3 exposures (5 or 7 would be good) at intervals between each shot EV 2 or 3 EV.

  He did a very limited AEB system, which allows you to take only 0.3 EV or 0.7 EV intervals 3 exhibitions. I hope that it would be possible to have an update of the firmware.

  Thank you

  Corrado

  I would find it acceptable to have 3 shots with 2 EV.

  It is a BIG problem for me as well.

• RX100 - firmware queries

  I am very satisfied with my RX100; but I have 2 suggestions that would make it:

  (1) an option to set the lowest shutterspeed globally (for all modes except S)

  (2) ability to use AutoISO I Manual Mode. It would be an absolute killer option for low light photography (I use it a lot with my Nikon DSLR).

  Hello
  Welcome to the Forums of Discussion of the user.
  We have checked the settings for the RX100 manual shutter speed and the lowest setting is 1/2000 of a second, and you can leave the shutter open for 30 seconds. (Mode S)
  http://eSupport.Sony.com/docs/dvimag/DS... 06/06.html

  You said all the modes, but s. are you referring to a shutter speed faster on Auto Intelligent or scene recognition?
  http://eSupport.Sony.com/docs/dvimag/DS... 02/02

  As for your second question, AutoISO for low light would be superior car.
  More information on Auto top can be found here:
  http://eSupport.Sony.com/docs/dvimag/DS... 03/facts03.htm
  Mode [Superior Auto], images of shoots camera based on the recognized scene, burst and then creates a composite image burst (shot from overlay).
  The camera automatically corrects the backlight and reduces noise by overlaying the images, so a better image quality of the results as in mode [Auto smart].

• Firmware for the rx100 allow 24 p

  Hello

  Really interested in this camera and the video quality looks amazing, but there will be a firmware to enable 24 p while shooting?

  Thank you

  Hello Bob,

  Welcome to the community of Sony.

  We cannot speculate on the future updates or if a product will be features in the future that it currently does not have. We do answer questions on drivers, products and assistance with products that have already been made public and cannot provide a response to future events, or we can provide a guess when or if the firmware updates will be executed for a particular product.

  The camera Sony DSC-RX100 is compatible with 1080 60 p or 50 p format movies. Unlike most compact cameras, the DSC-RX100 records high definition videos using a progressive approach instead of interleaving method. This increases the resolution and provides a smoother, more realistic image.

  If my post answered your question, please mark it as an "accepted Solution".

• Y at - it updated firmware for the m3 RX100

  Sony makes updates firmware for their cameras ie; RX100 m1/2/3, like to know before you buy one. Many sites seem to believe that it is rare that their cameras updated firmware. Cheers in advance

  Hello Oriley59,

  There is no update firmware, but made for the three models RX, you talked and it is difficult to assume that an update will be released soon.

  If my post answered your question, please mark it as "accept as a Solution.

• Request for Firmware RX100

  (1) problems with play button accidentally pressed while the camera is in my pocket. This causes the lens to extend, possibly damage camera. Maybe this can be fixed with firmware.
  (2) jpg mode settings cannot be applied in Raw + jpg mode. For example, in raw + jpg mode, I can't take advantage of the effects of image, HDR and other features. Of course, it cannot be applied to the raw file, but why not the jpg? Add this a feature would improve the potential camera by a long shot. The JPEG in this mode would be also better if lacking 20Meg.
  (3) provide an option to use the? as 2nd button function Fn key. As it is, the? the button does very little for the operations of the camera.

  Hello

  I absolutely agree with the point 3, customizing the '?' button is certainly very useful.

  Corrado

• RX100 iii lights not after a firmware update error

  I did a firmware update on my new camera and there was an error during the installation of the new firmware, after that he had already reset the old firmware. Now, the camera will have only the green light but the screen is still black. What should I do?

  Only, I met the same problem. Was updating the firmware to version 1.1 and the software gave me an error.

  After that my RX100M3 will not illuminate. The green light on the power button is constantly on. I tried several different things but still cannot get it to turn on.

  Tried to take out the battery for 10 minutes and then put it again. The battery is fully charged. I also plugged the camera power cable, same thing, green light but can't turn on. has released the SD, still won't turn.

  Help, please.

  Thank you

  Naveen

• Distortion of serious purpose RX100 M3

  There is distortion cushion important 24 mm lens, which is a serious problem during architectural photography. In my view, that there is an app lens correction for other Sony devices. How can I do for suggesting that Sony make a version of this app for the M3 RX100?

  Or could it be corrected by the firmware? It can be corrected in Photoshop, but it's quite tedious.

  The RX100III has the lens correction features?

  Presumably, he does, but who doesn't work for JPEGs, RAWs

  Regarding the distortation, I think it's just the unfortunate wos from the camera - so I guess there should be a function to correct this in camera (via JPEG)

• Where can I find Firmware Restoration CD 1.3 to download?

  I need to reflash an old Mac Mini. Through documentation of the Web site located at Firmware Restoration CD 1.4, it said I needed to download the Firmware Restoration CD 1.3, which does not exist. Anyone know where I can find it?

  Firmware Restoration CD 1.4 - Apple Support is the first thing that appears on a Google search.

• Firmware update failed, TC is now unavailable and no led light

  Found my TC this morning flashing yellow, found a FW update was available, clicked on update, downloaded FW but then he could not update and now TC is unavailable, I tried to reboot, but still no TC, before LED is off even on/after power on.

  How to treat?

  How to treat?

  Time Capsule 802.11n (4th Gen)

  The symptoms are typical of a Gen 4 TC... so thanks for putting this info in your profile.

  The new firmware is not the problem... However, the drop of water that makes the vase overflow. Your TC underwent a total failure due to bad soldering... the attempt of the update was this slight element of stress which caused the catastrophic failure.

  If you are a handyman, there is a fix... It of free... and set up to present enough to say that I am fairly confident with your symptoms, it will fix it.

  s/Apple-time-capsule-repair/GEN4-a1409-issues https://sites.google.com/site/lapastenague/a-deconstruction-of-routers-and-modem

• Can I change password Firmware from another Mac

  Can I change password Firmware from another Mac

  N °

• Resound LiNX2 Firmware 961

  I will get my first pair of hearing aids,² 961 LiNX RIE, 20 Sept. Pending this installation, I did my homework, including by participating in these forums of Apple on this topic.  Firmware seems to be a recurring topic here I'm worried.

  It seems that there is always a period to shake, with a lot of messages on the Bluetooth connectivity issues with updates of firmware sometimes correcting a problem.  While only cautiously optimistic, I want to be proactive in avoiding problems for my first experience of hearing aid in getting firmware updates as quickly as possible. Who needs to address my concern that, with regularly updated iOS updated to Apple (the last being downloaded 9.3.5 recently), connectivity can glitch again until an updated required corresponding firmware applies to my hearing aid (or vice versa).

  I don't expect my audiologist to warn me when a new firmware is available.  I also searched sounding site and do not see the links to all the pages that show the current version of the firmware, or all the instructions telling me how to check if my hearing aids have this latest version of the firmware.  (Yes, I will ask my audiologist which version I get in the original timeline.)

  I look forward to the improvements to the web site and possible Smart app where it just would not confirm if my hearing aids are up to date, but it is also possible to download and apply updates firmware for hearing aids via the Bluetooth connection, rather than an appointment to audiologist.  In the meantime, I'm looking for a way to get automatically notified (perhaps a list of electronic distribution to consumers and professionals) when firmware updates are ready to apply, with confirmation what version of iOS is required for compatibility with this firmware.

  Comments?

  This looks like a "problem of sound" - they will be able to tell you how to check the firmware version, how to use their app and if they support the user after the updated and changes or additions to their software.

  I suggest you seek their support site, forums, or use their contact information as a last resort. They know more about all the things you want instead of Apple users who help out here.

  In regard to updates to iOS, look in "" settings > iTunes and app store ", uncheck"Updates"to stop the automatic updates of operating system." You can do the same for apps if you want to really too much manual control over them. You should read the release notes and comments to work if the updates will change anything that you depend on.

  P.S., wait and see if others can help here too

• Keychain, iCloud + problems of Photos on MBPro since changed password and password set firmware

  Hello

  I recently changed the password for the connection on my main account on my MBPro and added a firmware password, but that doesn't seem to work properly: whenever I reboot Keychain keeps asking me to access the local keychain and all iCloud apps are disabled. I also have problems with pictures. FYI my boot HD is encrypted with FileVault.

  I put details on the issues below, as well as what I tried so far (based on the collected suggestions from these forums) as well as some newspapers Console elements that seem strange.

  I don't know how to proceed at this point that some options might make things worse if not done does not correctly (or in the right sequence). I'm tempted to disable Firmware password, go back to the old password, or turn off FileVault to see if the problems goes, but I'm afraid it might make things worse (and I would like to have these features runs later). I also have the opportunity to reinstall the OS and return to a previous TimeMachine upward.

  I would appreciate anyone's help on this one.

  Thank you very much.

  DOM

  Plug

  MBPro Core i5 2.7 Ghz 13 "retina

  16 GB RAM 256 GB SSD + 2 TB external HD.

  Mac OS X 10.11.16 (15-1004)

  FileVault is running on the boot disk (SSD).

  Firmware password has been set.

  I have a Time Machine backup (on a second external hard drive).

  I installed a functional copy of Mac OS X on an external hard drive 3.

  I do not use iCloud keychain.

  I have another admin account that works.

  Problems:

  (1) Keychain: whenever I start the CommCenter ask the session keyring password (I must then enter the previous admin password).

  I wonder then if I want to update the local keyring: to do this I have to enter my new login password in the "current password" and then I type the same new password fields. Once I reboot the problem reappears: exactly the same sequence, as if the information could not stick. Might have something to do with the FileVault and Firmware password.

  (2) iCloud: after having rebooted and enter my passwords from keychain as described above, none of the iCloud applications work (email, Messages, Contacts, calendars, reminders, Notes, find my Mac, iCloud drive, etc.).

  He tells me tells me he is not able to connect to iCloud and asked me to try to do it in the preferences panel. When I tried to connect there, he couldn't connect to iCloud and told to try again later.

  (3) photos: at the launch of Photos he says he cannot open the library system and propose to choose a. When I choose the right pair, it opens fine, but a ton of photos are most referenced correctly. All images come my an external HD (the iPhoto library is also on the same HD), and nothing has changed in the structure of folders.

  What I tried (after the Time Machine).

  1. I installed Mac OS was last updated.

  2 - I activated the guest account and tried to connect: it only works Safari.

  3. I logged in using another admin account: no problem with Keychain and all iCloud apps work. Not tried Photo since this account is not a library and is not configured for access to the main account.

  4. I tried to boot into safe mode: is not work (might have something to do with the password FileVault and Firmware).

  5-return to the main account I ran disk help and fixed permissions: discs seem to be ok.

  6. in the key string App I locked and unlocked keychain using the lock in the upper left corner of the application. When asked for my password I just typed my user password. When I rebooted I had the same problems.

  7. I've tried updated the password in the keychain app by entering the old password and then my new password for connection in the other two fields (new password and confirm). Still problems with iCloud and after restart I have the same problems of Keychain.

  8 - I tried resetting my default keychain: I got an error, because I don't have the permission to do so.

  9 - I tried to create a new keychain session and making it the default keychain, but I keep getting the same problems (iCloud does work does not + issues of password even after I reload).

  10 - iCloud: I tried to close the session from iCloud, then enter my iCloud ID and password, but it says no more: it cannot connect or that the Mac is already connected to this account. I closed the session again, iCloud used Safari to manage my AppleID (https://appleid.apple.com/), listed devices associated with and my MacBook off the list: I always have the same questions even after reboot. I even tried to delete the iCloud account since the Internet Accounts preferences panel, but it is not listed. I tried to add it, but he said that the Mac is already connected.

  11. in Terminal, I glued the special order in some discussions (find ~ $TMPDIR..------(-+ flags sappnd, uappnd, schg, uchg o! - user $UID o! - perm - 600-) 2 > & -| wc-l | pbcopy) and got 21 to 22, and a result the first time earlier.

  12 - looking at logs just console after reboot, I see a couple of things that seem odd that appear multiple times with slight variations (I paste only an example):

  Sandbox: launchd (1) system policy: deny (1) file-writing-break the/private/var/run/dyld_shared_cache_x86_64h link

  HideUntilCheckIn of the property is a problem of architectural performance. Please transition away from him.

  sharedfilelistd [356]: [default] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentApplications. SFL with error error Domain = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentApplications.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentApplications sfl NSUnderlyingError = 0x7fd93a70ec20 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  [NetworkDefaults]: cannot write new default values of network disk: error Domain = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"networkDefaults.plist"in the folder"Géoservices"." UserInfo={NSFilePath=/Users/Marc/Library/Caches/GeoServices/networkDefaults.pli st, NSUnderlyingError = 0x7fb1dbf69530 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  Keychain Circle Notification [448]: Displayed at the launch:)

  )

  securityd_xpc_dictionary_handler Keychain circle [448] DeviceInCircle error Domain = com.apple.security.sos.error Code = 4 "Keybag never unlocked, ask after first unlock" UserInfo = {NSDescription = Keybag never unlocked, ask after first unlock}

  iconservicesagent [381]:-[ISGenerateImageOp generateImageWithCompletion:] has no image descriptor composit of < ISBindingImageDescriptor: 0x7fbfe36118a0 >.

  accountsd [384]: [warning] Services all gone, delete all accounts

  SpotlightNetHelper [420]: __tcp_connection_tls_session_callback_write_block_invoke.434 tcp_connection_tls_session_error_callback 12 22 error

  Quicksilver [470]: Error resolving alias file:///Volumes/ABC/DEF/GHI.JPG%20alias: error Domain = NSOSStatusErrorDomain Code =-35 ' nsvErr: no such volume.

  Sandbox: SpotlightNetHelp (420) deny (1) - reading-file data/Applications/App Store.app

  (This repeats for many applications and their content files)

  12 - looking logs console after entering my iCLoud references (in the prefs ICloud panels) I get at least about the error that is similar in the newspapers after the reboot (cannot save SharedFileList)

  com Apple.Preferences.iCloud.RemoteService [512]: error = AKAuthenticationError Code =-7034 '(null)' Domain: AKAuthenticationErrorForcedFailure

  com Apple.Preferences.iCloud.RemoteService [512]: error in CoreDragRemoveTrackingHandler:-1856

  com Apple.Preferences.iCloud.RemoteService [512]: error in CoreDragRemoveReceiveHandler:-1856

  sharedfilelistd [283]: [default] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl with the error Domain error = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentDocuments.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl, NSUnderlyingError = 0x7f915242c1b0 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  sharedfilelistd [283]:-[ListStoreSnapshot writeToFile:] could not save SharedFileList in/Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl with the error Domain error = NSCocoaErrorDomain Code = 513 "you don't have permission to save the file"com.apple.LSSharedFileList.RecentDocuments.sfl"in the folder"com.apple.sharedfilelist"." UserInfo = {NSFilePath = / Users/mark/Library/Application Support/com.apple.sharedfilelist/com.apple.LSSharedFileList.RecentDocuments.sfl, NSUnderlyingError = 0x7f915242c1b0 {error Domain NSPOSIXErrorDomain Code = 13 'Permission denied' =}}

  Keychain Access application for Keychain "login" after changing the password

  The problems of Keychain - see post of khati

  OS X always ask to use your passwords in keychain

  Try to go into System Preferences/iCloud and stop synchronization. Wait a few minutes, then recheck the timing.

  Have you tried the signature to iCloud and then reconnect?

• An error occurred during the update the firmware.

  Hello, I have an orange light flashes on my Airport Extreme device indicating that a firmware update is available. However when I tried to update I had the following error every time: "year error occurred while updated the firmware-6, 721. What should I do?

  Thank you in advance for your help! ... soon a

  If this is not the case, already, connect your iMac to AirPort Extreme with an Ethernet cable. On the iMac, make sure that Ethernet is enabled and disabled WiFi (or next to). Then try to use the utility AirPort again try the update of the firmware.

• says that there is an update of firmware available for my 3 t time capsule. I get "an error occurred when downloading". How to find the problem?

  I said that there is an update of the firmware available for my 3 t time capsule. I get the message "an error occurred when downloading". How to find the problem? I have elcapitan 10.11.6 and capsule version 7.7.3

  Try temporarily, connect your MacBook Pro to your Time Capsule using an Ethernet connection... If not already, then try downloading the firmware again.