Trigger not successfully completed

Similar Questions

• string in quotes not successfully completed

  Hello
  
  I get the error message ' ORA-01756: string not properly completed ", on executing the script below. Kindly help
  

  set feedback off;
  set define off;
  set serveroutput on;
  declare v_sql varchar2(4000);
  v_cnt number(1);
  begin 
    select count(1) into v_cnt
    from user_tables t
    where lower(t.table_name) =lower('C2P_ETL_BATCH_CONFIG'); 
    if v_cnt = 1 then 
      dbms_output.put_line (' Table C2P_ETL_BATCH_CONFIG exists');
    else
      v_sql:= 'create table C2P_ETL_BATCH_CONFIG
  (
    ETL_BATCH_CONFIG_ID NUMBER(8) not null,
    ETL_BATCH_CONFIG    VARCHAR2(50),
    ETL_BATCH_FILE      VARCHAR2(150),
    ETL_BATCH_SEQ       NUMBER(2) default 1 not null,
    B_DISABLE           NUMBER(1) default 0 not null,
    FILE_PARAMETERS     VARCHAR2(250) default ''
  )';
     execute immediate v_sql;
  
  v_sql:= 'alter table C2P_ETL_BATCH_CONFIG
              add primary key (ETL_BATCH_CONFIG_ID)';
      execute immediate v_sql;
  
  dbms_output.put_line (' Created table C2P_ETL_BATCH_CONFIG');   
    end if;
  end;  
  /

  v_sql: = ' create table C2P_ETL_BATCH_CONFIG
  (
  ETL_BATCH_CONFIG_ID NUMBER (8) not null,
  ETL_BATCH_CONFIG VARCHAR2 (50).
  ETL_BATCH_FILE VARCHAR2 (150).
  ETL_BATCH_SEQ NUMBER (2) default 1 not null,.
  B_DISABLE NUMBER (1) default null, 0
  Default FILE_PARAMETERS VARCHAR2 (250) "'<>
  )';

  Thank you

• ORA-00933 sql is not properly completed.

  Dear members,
  
  I have the following query in Report Builder 10g,
  
  Select a, b, c
  FROM table1
  where a = 12
  
  & p_whr_fy & p_whr_supp & p_whr_bt & p_whr_mat_spec & p_whr_lc_num & p_whr_cotton & P_WHR_LOC_ID
  
  Union of all the
  
  Select a, b, c
  from table2
  where a = 12
  
  & p_whr_fy & p_whr_supp & p_whr_bt & p_whr_mat_spec & p_whr_lc_num & p_whr_cotton & P_WHR_LOC_ID
  
  Here I used the lexical settings, and with spaces in the lines its ok but when trying to change the query / remove spaces in the lines, it gives the error.
  
  ORA-00933 sql not successfully completed
  
  With regard to:

  Hello
  Check your default values for substitution variables, at least one of them is not empty and causes an error.
  kikolus

• KB2756918 fix does not update. system keeps asking you to do again and again even if she says she successfully completed

  system asks continually updated. but when I update and the system says it successfully completes. It all comes down to sy, I got an update which is the same as that over and over again. How can I stop it?

  Hello

  Thank you for writing to Microsoft Communities.

  According to the description of the problem, it seems that windows update constantly updated of the same update that is already installed.

  Please go ahead and follow the steps mentioned and later a update on the State of the question.

  Method 1: Try to reset components to update Windows from the following link:

  http://support.Microsoft.com/kb/971058

   

  Method 2: Also scan your computer from the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.microsoft.com/security/scanner/en-us/default.aspx.

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  For your reference:

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

  (For Windows Vista)

  Please follow these recommended steps and post if you still experience the problem.

• I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are therefore currently operating on 9.2.1. It just says: update could not be completed, and that was in the 11-15. I pay for extra storage if this isn't the issue...

  I have an iPhone 6 and an iPad Air both have always been updated you are prompted and are running 9.2.1. I can't get either do an iCloud backup, he repeats to me just last backup could not be completed. The last successful backup has been in November 2015. I pay for most large storage storage account is not the problem but, the fact I pay for cela and cannot use it is very frustrating = / I really need to get my backup iPhone I have a few important pictures there. I have read other posts, but nothing useful there. Is this a problem in one of the updates at this time or some other interferente app? Or? Thank you...

  Welcome to the Apple community.

  Please check that your device is correctly connected to the wireless internet (settings > wifi) and is plugged into a power source, check also that you have enough space in iCloud for your back upward.

  You can check the space available in settings > iCloud > storage and the space needed for the next backup to the settings > iCloud > storage > Storage manage > backups > appliance > Back Up Options > next backup size (wait for the spinning until the gear icon).

  Assuming that you are eligible for iCloud upward, you should try a forced first stop, hold down the buttons side in top and home together until the unit stops, then restart by pressing the side/up button.

  Then, try to connect the device to a new location (different WiFi network)

  If your backup continues to fail, you can try to disable the backup on your mobile device (settings > iCloud > backup), reboot the device and then turn on BackUp on new.

  If this help not disable backup again, remove your existing back to the top of settings > iCloud > storage > Storage manage > backup > this device (scroll down) > delete backup, restart the device and then turn on BackUp.

  If you are unable to make a return to the top, try to connect on iCloud (settings > iCloud (scroll down) > Sign Out (you will need to enter your password at this point), restart the device and sign in iCloud to settings > iCloud.)

  The next thing to try would be to restore your network settings. (Settings > general > reset > reset network settings)

  Reset your network settings will erase your cell phones and wireless network settings, including saved networks, passwords for wifi and VPN settings, that you can use. It will affect to the Internet but will not be an impact on telephone services because these settings are automatically configured by your carrier. It may take a few moments to enter again all your network settings, but it shouldn't cause you any major problems. If you are comfortable re - enter your network settings, you can try this step earlier in the troubleshooting procedure, i.e. after the forced shutdown suggested above.

  If this does not help, try to disable some elements for the back upward in a model to try to establish if your problem is caused by specific data on your device. You can do with settings > iCloud > storage > storage management > backup > appliance > Back Up Options.

  If you are still not able to perform a backup from iCloud, you can try to restore your phone which you should do by making an iTunes backup via your computer and restore from that.

  Be able to go back to the cloud can be very useful, especially if you have access to a computer or rarely have access to one, however unless you need specifically to use iCloud to go back, you'll find a backup on iTunes much more convenient and possibly more reliable. However if you save up to iTunes be sure to encrypt the back upward if you want to keep your data on health and passwords etc.

  More on v iCloud iTunes backup

• x 64 Windows Vista Update Agent is terminated abnormally with an error 80070424 and reset of the agent is not successful.

  I searched through of many post about problems with Windows Update Agent unusable for Vista 64 computer x which I maintain on a volunteer basis for a not-for-profit organization. I tried the following that I found in various articles in the knowledge base:

  1. Requests for assistance MS FixIt suggested performance. They have all failed when installing the PowerShell.

  2. replace officers update the page that provides the installation program. Installation always eventually fail.

  3. According to the remittance advice to Update Agent, found at https://support.microsoft.com/oas/default.aspx?gprid=6527&st=1&wfxredirect=1&sd=gn

  Advice, to #3 was informative since some commands manual regsvr32 *.dll reported errors where the dynamic link library wouldn't "load" or the administration server could not find a certain "entry point". Does that mean that these dll is corrupt and must be replaced. If so, how he does it. It doesn't seem practical in more aggressive steps suggested to reset the agent given that the errors occurred using the less aggressive path.

  The computer I'm servicing came with Vista delivered, and the original disks are not available. The Startup Repair utility reported no errors or corrections. In addition, sfc/scannow only reports an error indicating it cannot successfully completed his task. So, I don't know how I can successfully restore these dynamic link libraries.

  I thank you for any advice you can give and forgive me if I don't have enough to search the knowledge base for an answer that already exists. Have a great day.

  Once again thanks for your response. I spent more than 20 hours on this computer and I wonder if the upgrade with Win 7 (or 8 when available) will solve the problem.

  I am a volunteer system to this nonprofit administrator, and my suggestions to secure computers are not always accepted. Thus, they probably will not disconnect the computer from the network. I suggested that personnel limit only accounts and that we establish a security policy for computers and a "standard" image However, each clerk vetoed my suggestion. I note only about one-tenth of a vote on all business issues. I have little to say in what is done. I do mostly what I said and I work what they deem is a technical miracle occasionally.

  I will suggest they buy an upgrade if this should solve the problem, since I can't spend much more time on this issue. If this does not resolve the problem, they work with what they have, because they would not listen when I told them that they should not install all these products of third-party software "free." I told them that if it is not Oracle (formerly Sun), Microsoft or Adobe don't install it. Their products cover everything they need. We cross our fingers and hope that nobody issues a 'format c:' command remote computer impaired!

  Have a wonderful day.

• I can't buy apps in Windows 8 Store: "your purchase could not be completed, something happened and your purchase could not be completed.

  When I try to buy an app out of the store, I get the message:

  "Your purchase could not be completed . " something happened and your purchase could not be completed '

  A new attempt of results in the same error.

  I tried most, if not all, solutions to this problem on the forums (definition of the location, date/time, reset the windows store, crossing the local profile cache, using several computers running different versions of Windows 8, using "sfc/scannow" in a command prompt, etc..)

  • This issue is not present on my windows phone 8 device.
  • At one point, I was able to buy apps with success.
  • I recently configured a VPN (Although disabling the VPN does not solve the issue)
  • I run 2 PCs of Windows 8 and use the same Microsoft Account for both
  • I recently transferred a XBOX live gamer tag to my Microsoft Account
  • I have a credit card and a PayPal account set up in my billing options
  • Recently, the PayPal account was not properly authenticate on my windows phone, I deleted and added it and it now works fine
  • In the account for the store settings (Windows + C |) Settings | Your account | Payment and Billing Information), he said: "before you can purchase an application, you must add a payment method to your account" when I click on add a doesn't MATTER.  To http://account.live.com billing options, there are two payment options clearly listed and functional.  What happens?

  That's all that I think I speak for the moment.  I know that Microsoft is currently changing parts of the Microsoft Account system, but I didn't know that an error like this would be because of that.  So I want to know what I can do to solve the problem immediately.

  Thank you

  OK, I solved the problem.  I still have questions using my PayPal account, but now I'm able to use my credit card.

  Here's what I did:

  1. Open the app Store
  2. Press the Windows key + C, then select settings
  3. Select the option menu: your account
  4. Select "Change user", then to connect to ANOTHER account. (I tried to simply connect to the same account again, and it did not work)
  5. Select the Add payment option (which should now work and load a menu)
  6. Close the menu and return to your old account using Exchange User
  7. Click on add payment option once again, it should now really open. (Assuming it wasn't before, that, for me, it wasn't)
  8. It will now allow you to add a payment, and I suggest strongly that add you payment options you have currently listed there.  I think there is a problem with the PayPal accounts in particular.
  9. Buy your favorite again, applications finally.
  10. Fact.

  My PayPal account still does not work after that.  Well, I think it has something to do with the settings "preferred payment method" Paypal.  It might be interesting to contact PayPal on this subject, because I am able to use regular credit cards perfectly well after this "correction".

• drop the triggers in the SQL code causes not properly completed order.

  running the following command in SQL developer, giving the following error message
  ORA-00933: SQL not correctly completed command.
  What I am doing wrong
  

  Begin  
  For I In (Select Trigger_Name, Owner From Dba_Triggers Where Trigger_Name Like 'ABC%' And Owner = 'my_schema')
    Loop  
      Execute Immediate 'DROP TRIGGER '||I.Owner||'.'||I.Trigger_Name;  
    End Loop;  
  End;

  Published by: Mo2 on April 16, 2010 12:21
  
  Published by: Mo2 on April 16, 2010 12:24

  MO2 wrote:
  Yes he has.
  is an example of the names BIN$ + i6ls2WnR/Svz0wA5LSG8A == $0

  In fact these triggers created by the database after I have remove the tables. is there a way to avoid their creation?

  drop trigger BIN$+i6ls2WnR/Svz0wA5LSG8A==$0;
  drop trigger BIN$+i6ls2WnR/Svz0wA5LSG8A==$0
                   *
  ERROR at line 1:
  ORA-00933: SQL command not properly ended
  

  Yes, oracle complained about it during a fall.
  These objects will be created if you recyclebin on.

  You can either disable your recyclebin or you can purge these items in recyclebin after a fall. Make sure that you require this function or objects in the future.

  Concerning
  Anurag

• Why the following statement is not successful?

  This statement is executed successfully.

  SQL> select to_char(sysdate+1/24,'yymmddhh24') from dual;
  
  TO_CHAR(
  --------
  09081510

  Why the following statement is not successful?

  SQL> select to_char(to_date(to_char(sysdate+1/24,'yymmddhh24'))) from dual;
  select to_char(to_date(to_char(sysdate+1/24,'yymmddhh24'))) from dual
                         *
  ERROR at line 1:
  ORA-01861: literal does not match format string

  You can be enlightened by this script.

  SQL> declare
   v_date date;
   begin
   select to_date(''||to_char(sysdate+1/24,'yymmddhh24')||'','yymmddhh24') into v_date from dual;
   dbms_output.put_line(to_char(v_date));
   end;
   /  2    3    4    5    6    7
  15-AUG-09
  
  PL/SQL procedure successfully completed.
  

• the operation could not be completed error 1035 com.apple.mobilephone

  I have phone 7 and a mistake on putting in place the reception of voice mail

  the operation could not be completed error 1035 com.apple.mobilephone

  Same error message, even tried operation. iPhone 6, iOS 10.0.1

• your purchase could not be completed itunes

  Am has this issues on my account, I can't buy something please what is the solution to this? your purchase could not be completed itunes?

  What did he say?

  Have you contacted iTunes support?

• Your purchase could not be completed

  When I want to buy the head of State... what to do?

  Hi Alexander_dx316,

  I understand that you receive a message "your purchase could not be completed" on your Apple TV (the community you posted in).

  The first thing I would say is to log out of your iTunes Store account, then update your billing information.   This includes enter them your debit card or credit card number, expiration date and security code.  In addition, make sure that the name on the card and the billing address match the information on your bank statement.  Reconnect to your iTunes Store account when you're done.

  Modify or delete your Apple ID payment information

  If you have a balance on your iTunes Store account, and your current payment method does not work, you can try to use a different credit card or buy a gift card from a retailer iTunes local and which apply to your account to clear the balance.

  How are charged purchases on iTunes Store
  

  When you make a purchase, content credits are used first, as long as the value of the item you buy is less than or equal to the value of the credits. Gift cards are used then. If your gift card is less than the total cost of the purchase, the payment method that you have paid to the record is charged for the balance.

  If these steps do not resolve the problem with your account, please get in touch with the iTunes Store support team.

  Take care.

• Installation of updates could not be completed after reboot

  I have a few updates. When I click on update, the full download and then they ask for reboot the device. When the beginning of the device running, they show the installation a message show bar "installation could not be completed try to update again...» "I try again but still the same problem. It's been like months I couldn't do updates. Help please!

  Hello A.MROUWEH,

  Thank you for reaching out to the Community Support from Apple. I know how it is important to keep your applications up to date and I have some information that can help. Whenever we see problems with updates and downloads of the app, it's a good idea to disconnect from the App Store by clicking on the Store menu and selecting "logout".

  Then, you restart the Mac and reconnect and see if it will download updates. If the problem persists, test the behavior in safe mode by following the steps in this article: try safe mode if your Mac does not start-up.

  Let us know if the problem persists. The entire community is here to help.
  Best regards

• I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP

  I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP

  Why has been upgraded to El Capitan failed before?

  The only problem is that some applications require the upgrade and some devices that connect to the computer require updated drivers up-to-date. The problem is that for some devices and applications updates are not available and so they do not work with El Capitan.

• "This action could not be completed" error connecting to iCloud

  Hello world

  Just made a clear 9.3 beta 3 install on my 6s (9.3 beta 2 was previously here), recovered from iCloud backup and now I get "this action could not be completed" when I try to connect to my iCloud.

  iOS asks me to enter into the details of iCloud and then boom. This error.

  Can you please tell me how can I fix?

  I get the error "check failed".