Trigger remotely with frames?

Similar Questions

• Shooting 430 EX II remotely with 6 d

  Well, after searching around I know this question has been asked by many. And I got some very useful information. However, I have not seen an answer to a simple question that always baffled me. When you photograph the 430 EX II remotely with a 6 d, is a receiver and a necessary issuer or just the transmitter? Is that in some cases both are needed? Help, please!

  Recommendations for equipment that would also help would be appreciated.

  The 430EX II is capable of being an "optical" slave (it's builtin... no extra accessories are needed if used with a 'master' cannon).  It cannot be a 'master '.  In other words, it will work as a detached flash he gets 'line of sight' camera 'master' according to trigger the flash.

  The 6 d camera body is not a built-in 'trigger' (the 6 d is not a pop - up flash).

  In which is the 'master' (trigger), you can use either:

  • ST - E2 Speelite Transmitter (this unit works as a 'master', but is not actually a flash.  There also a beam of the development of assistance to help them focus in the dark.)
  • 600EX-RT - this is lightning flaship of Canon.  It can be a trigger or a slave.  It can also work optically or by radio. It also has a focus-assist beam builtin.
  • 90EX - this is a very small, ultra-low power flash, but it can work as a master on the camera to trigger a remote slave flash

  There are also third-party products that can act as a trigger and a receiver.  Some are expensive - and there are some more basic units which are relatively good cheap (but do not support E - TTL - flash would work as a 'manual' flash.)  Gun system supports E - TTL features.

  The 430EX II will be more reliable if you point the bottom of the body to make in the face of the trigger on the device (and then enjoy the swivel head to point the head everywhere where you need light.)

• Can I use Siri new Apple remote with my Apple TV 3rd generation?

  Can I use Siri new Apple remote with my Apple TV 3rd generation?

  No. not compatible.

• With the help of Apple Remote with MacPro (desktop)

  (1) pair an Apple Remote with my MacPro (desktop) to control iTunes from across the room?

  (2) if so, how?

  Thank you!

  I don't think that any recent Mac Pro has the required infrared receiver for this to 'see' the Apple Remote.

• Enable or disable the write lock filter remote with a script

  Hello

  Is it possible to enable or disable the filter of writing EWF remotely with a script?

  Sending a command in a batch or the vbs.

  Thank you.

  In addition to HPDM, you can use the ewfmgr command in a script.  For example, ewfmgr c:-disable or ewfmgr c:-activate.  You will need describe reboots as well.

• Remove all the missing links with frames

  How can I make a script to remove all the missing links with frames in indesign?

  var doc = app.activeDocument;
  Links var = doc.links;

  for (var i = links.length - 1; i > = 0; i--) {}
  If (links [i] .status == LinkStatus.LINK_MISSING) {}
  try {}
  Links [i] .parent. Remove();
  var image = link.parent;
  var frame = image.parent;
  Frame.Remove ();
  counter ++;

  }
  {} catch (err)
  $.writeln (i + "-" + err);
  }
  }
  }

  I have try this script, but still remain a framework, what is wrong with that?

  It works for me:

  var link, image, frame,
  doc = app.activeDocument,
  links = doc.links,
  counter = 0;
  
  for (var i = links.length-1; i >= 0; i--) {
      if (links[i].status == LinkStatus.LINK_MISSING) {
          try {
              link = links[i];
              image = link.parent;
              frame = image.parent;
              frame.remove();
              counter++;
          }
          catch (err) {
              $.writeln(i + " - " + err);
          }
      }
  }
  

• FM7.2: Problems with frame anchored in the rotated table cell

  Hello O Experts,

  I am facing a nasty problem with FrameMaker 7.2 for Windows with frames embedded in rotated table cells. I was wondering if any of you have seen this problem and know how to solve.

  The problem is reproduced as follows:

  1 create a table.

  2. Add a small frame anchored "the point insertion" inside one of the cells.

  3. Add a line of text to the anchored frame.

  4 turn the cell by 90 degrees clockwise or counterclockwise.

  Up to step 3, the anchored frame and the line of text behave as expected. Can I choose both the frame and the text line, move and resize. In all cases, they are displayed correctly.

  After step 4, the following occurs:

  • The content of the anchored image appear or is badly distorted.
  • Is no longer, I can select or resize the anchored frame (if I try, FM acts irregularly and wildly moves the outline around the page).
  • I can choose is no longer the line of text in the frame.

  I enclose a file FM (created using integrated model "portrait" of FM) sample that illustrates the problem.

  If someone knows this problem and I hope a solution, I would greatly appreciate it if you'd share. Thank you very much!

  Michael,

  If you turn just the anchored frame itself and not the cell (content) then everything behaves. If you have lots of content for the anchored frame, then place a block of text in the anchored frame, use a suitable paratag in text and only turn the framework anchored (all content will follow along then).

• Using a remote control or the remote with two Apple TV app?

  1 can a remote AppleTV, is the most recent or a last generation we use with two different AppleTV (one is the most recent and is the older generation)?

  2. an iPhone Remote APP can be used with two different Apple TV?

  Thank you.

  1 not easily. There is no way to select the device to control, you end up control both. You could get a programmable remote control and lead to control different devices, but this would require a deception.

  2. no doubt. The Remote app offers a grid of all ATVS, he knows, and you choose the one to control. It has the advantage of a keyboard for searches, passwords, etc. Do you need a remote pair with each ATV.

• New remote with old iMac?

  Can I use the new Apple Remote (from the new Apple TV) with my iMac G3/500 DV - SE running 10.4.11?

  Yes, you can control the music on your iMac with the remote control of Siri.

• Series Satellite L supports wake up remotely with the remote software?

  Series Toshiba L does support waking the computer from a distance with the remote software?

  What cell phone do you have exactly?
  Which option do you mean exactly?
  WOL (wake up on LAN)?

  In most cases the WOL is supported by the BIOS.

• Second pairing remote with the new Apple TV

  We just bought the new Apple TV and a second remote so that the kids could play multiplayer games. The first remote control paired very well when we put in place, but I can't do the second pair distance.  I went through the user guide, but haven't found anything that helps (although could be the dominant in the post-holiday lethargy).  Any advice?

  Thank you.

  Remote only 1 Siri can be paired with the ATv4 both...

  http://www.IMore.com/dont-buy-multiple-Siri-remotes-thinking-you-can-use-them-Mu ltiplayer-games-you-cant

  http://www.idownloadblog.com/2015/10/26/heres-why-you-shouldn ' t-buy-a-extra-siri-distance-to-this time.

• Can I use 2 siri remotes with an Apple Tv?

  Can I use Siri with an Apple TV remote controls at the same time for multiplayer games?

  N °

• Remote with Apple tv4

  I read this update today update Apple Remote app to work with Apple tv4.  Someone tried and if so, how to run because I can not.  Unless you have a real answer, please do not bother to write.  Thank you.

  I have nothing to make it work. Update ATV4 to tvOS 9.1, put iPhone updated to 9.2, launched the remote on iPhone app and just ATV4 has shown and worked.

  "Not a real answer.

• mask test remotely with 6030 LeCroy oscilloscopes

  Hello everyone!

  For automated testing, I have to use a mask for a road test, seeing the PASS/FAIL result.

  I'm on WM-RCM-E_Rev_D_902208 (manual remote) .pdf but I did not any remote control to control the mask and read the result of test of mask (success or failure).

  If possible, I would like to distance load a mask of the oscilloscope (or directly from the computer), the conditions test and read mask test result.

  There is somewhere a list with these commands? If so would you please send it to me.

  Have you other example/suggestions for me how to do?

  Thank you!

  Hi Nicu,

  Use the VBS command to send the automation for the P/F feature strings, you're wanting access. Are the ranges of automation by running XStream browser; There is a shortcut to this application on the desktop of the scope. XStream browser displays the interface of automation of the scope; Connect to the "local scope" and then navigate to PassFail/Q1. The Q1 level, you will see the global settings. Go to the folder of the operator to see additional details.

  A few examples:

  To specify which file mask:

  VBS ' app. PassFail.Q1.Operator.Filename = "D:\Masks\100BaseT.msk" "

  To configure the condition:

  VBS ' app. PassFail.Q1.Operator.Condition = "AnyOut" "

  Reading the result of Q1:

  VBS? "return = app. PassFail.Q1.Out.Result.Value' (returns-1 for true, 0 for false)

  Proofreading the overall result of P/F

  VBS? "return = app. PassFail.LastPass.Result.Value' (returns-1 for true, 0 for false)

  Do not hesitate to contact me if you have any additional questions.

  Best regards

  Alan

• front panel remote with firefox

  Hello

  I used to publish screws on the 8.6 LV Web server, not the problems of witkout, but with workaround solutions, it entered into deployment.

  Now, to try similar things and are having problems.

  I use 2010sp1 (english version) LV on a German XP Professional with the German Version of browsers.

  To start simple, I used the web publishing tool.

  When I do a simple snap of the VI, it works very well with all browsers. When I turn on remote it works only with the

  IE (7 in this case), but only if I disable the Kaspersky Firewall (exe of the VI is included in approved programs)

  Opera (my favorite, here 11.5) asks a missing plug-in, but displays the header text and footer

  Firefox not similar but shows only a small icon for the missing front.

  I am well aware of the http://digital.ni.com/public.nsf/allkb/151BE12C055F57CE86257043006CB4B3?OpenDocument

  and the fact that insofar as I understand that "nplv2010win32.dll" is present when it is intended.

  The list of the addons/plugins in anf Opera Firefox the two metion the plugin.

  I hope that it is not true that remote Panel does not work with IE execept, as one of my colleagues mentioned.

  Gabi

  Hi Gabi,.

  Unfortunately, your colleague is right.

  There are problems using remote façade of LV in the latest versions of firefox.

  It has been possible with firefox 1.x.

  Opera is not supported for remote access of façade.

  In fact, IE is the browser more stable and reliable for the remote façade LV panels.

  Regarding the Kaspersky Firewall:

  Please can you check if all ports which are used in the Web of LabVIEW server are open...
  The ports used by the Server Web LV you can find in the settings the LabVIEW server options.