Similar Questions

• My hp LaserJet 1022nw fails to analyze the download of the printer driver after that macOS Sierra upgraded.

  After switching to macOS Sierra, my printer (hp LaserJet 1022nw) WiFi does not print work orders, even if the printer seems to be to receive the order of work and how to complete it in the work queue.  Connect the printer to my MacBook Pro via USB, I am able to print without problem.  Other computers on the network continue to be able to print wireless.  When I connect via USB and try to scan a updated driver, download cause analysis a software fault message.  Any ideas on how I could proceed to continue to connect and use my printer wireless with the new OS?  The 1022nw is detectable as a printer available (wi - fi) and can normally be added to the list of printers, but doesn't have the print queue even thought that they seem to have been dealt with, and then disappear from the queue.

  Open System Preferences > Printers and Scanners and select the print tab.

  Then the right or control click on the printer on the left then click: reset the printing system

• Printer HP LaserJet 1022nw, no drivers for my mac?

  Hello

  I have a HP LaserJet 1022nw printer, and I can't install it on my mac? It says that I have no drivers for it? and that my mac runs 10.7 fully updated.

  Please be more specific.

  Please, try the following steps:

  First temporary plug to the printer with a USB port, click the Apple, then software update. I think that the drivers will be updated successfully by following these steps. Then, enter print & scan and add the printer...

  If these steps fail, downlaod and install the update drop-down list next:

  http://support.Apple.com/downloads/DL907/en_US/HewlettPackardPrinterDrivers.dmg

  Then you should be able to add the printer with no problems.

  Kind regards

  Shlomi

• LaserJet 1022nw: repetitive printing; Update Firmware Laserjet 1022nw

  Using wifi with Cisco router network printer. Printer prints ok document, but then keeps repeating same document constantly. Tried to reboot the router, removing and reinstalling printer, drivers updated.   try to update the firmware. get the message that cannot run, as RFU option is set to Off and locked.  No idea what it is or how to change it.  Or if the firmware update will even help with this problem.

  Hi @kptax ,

  I see that you are having problems with the continuous printing printer. I will definitely do my best to help you.

  I have provided a document to disable bidirectional support, which should solve this problem.

  Product always prints the same Print Job after it is installed on a network.

  If you're still having problems, download and run the printing and scanning doctor. It will diagnose the problem and could solve it automatically. Find and fix common printer problems using the tools of diagnosis HP for Windows?

  What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)

  How is the printer connected? (USB, Ethernet, WiFi)

  If you need help, let me know.

  Good day!
  Thank you.

• 1022nw freezes Windows 7 Pro x 64 when printing in Word 2010

  I use a 1022nw on a Lenovo X 220. The 220 X is in the dock of Lenovo and the printer is connected via USB. The 1022nw worked for years, but recently it randomly freezes the 220 X when a print job is activated shortly after another completed. The only recovery is to kill the system with the power button.

  Thanks for letting me know the pilot XPS day solved the problem for the Laserjet P1102w vroberts .

  I checked the site and unfortunately there isn't one available for the Laserjet 1022nw model.

  Thank you.

• HP 1022NW no wireless after firmware doesn't update

  So, now I really got myself fire-tray in fire...

  I had a little problem with my HP 1022nw, check here:

  http://h30434.www3.HP.com/T5/Mac-printing-and-scanning/only-first-page-is-printed-the-rest-empty-PAG...

  and here:

  https://discussions.Apple.com/message/20289881?ac_cid=op123456#20289881

  so, in a final attempt to solve the problem, I choose to install new firmware, available here:
  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-59293-2&CC=NL&DLC=NL&LC=nl&...

  Well, now the printer works fine, using USB or Ethernet connection. But no way it connects wireless somehow. I can not enter the WPA key and name of network and the configpage just keep showing the IP 0.0.0.0

  I live with the update of the firmware?

  Hello

  A new Firmware update is now available for the HP LaserJet 1022nw printer printer. The link is as below:

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=bi-117532-1&CC=US&DLC=en&LC=en&os=4063&Product=439324&sw_lang=

  Please update the firmware via USB connection only and it should bring the wireless connectivity options.

  Regarding.

• LaserJet P1102w: Address in the wrong place on the envelope of 6 3/4 with LaserJet P1102W

  When I print 6 3/4 envelopes in Word since my Windows 7 64-bit system to a new LaserJet P1102w address is correctly centered from top to bottom, but it is so far to the left half of the address is cut off from the envelope. The same settings printed correctly with my old HP LaserJet 1022nw printer.  Can HPW I fix?

  Bear with me a moment... My printer is a different model than yours, but here's what I discovered. Firstly a bit of background. My old HP B209 printer would print envelopes card without problem, but when I started using my printer HP Photosmart 6520, it would just spit in the envelope without printing the addresses, even if I chose an envelope of greeting card in the printer properties. HP could not solve my problem and other sources on the HP Forum said that HP just made a blunder in designing is not the printer to print envelopes of greeting cards.

  Finally after a year or two, a member of the HP Forum suggested I have try select the C5 envelope in printer properties and that is, the envelope printed however; the address printed back ok but send it to the address has been out of the envelope with only a partial address display. For some unknown reason, I selected 'options' on the printout of the envelope (a feature I've ever used) and learned that I could work out where the return address and send it to the address were located on the page. When you click the 'Options' button you can adjust the situation where each address appears on the page. You change the 'top' and 'left' numbers you can watch address icons (which appear as straight lines) are moving on the envelope. Pass each address around there where you want it and then try to print the envelope. If each address is too right or too far left or should be raised or lowered just play with the settings until the addresses where you want. Write your settings on a piece of paper and stick it on the side of your computer tower or someother convenient place so you can store these settings in the future.

  Now... don't forget to change the envelope size to the default envelope size you are using in general. I always use a #10 envelope business for my personal correspondence. Otherwise, the next time you go to print a standard envelope (what size is that you are using) the parameters will always be in place for the envelope of 6 3/4 that you use and addresses does not print correctly. You will not need to change the settings of your default envelope size because it will always go to the value by default (unless you change it) hope this solution works for you.

• LaserJet 1022n pilot Wireless does not work for Windows 8

  I am just checking that the 64-bit of Windows 8 for the 1022n driver will work for wireless printing. I have been unable to operate and I noticed that the pilot says that it is for basic printing. Does that mean he does not support wireless, and if yes then when they will fix it. Anyone know?

  I'm sorry you have a problem with wireless printing. I'll be happy to help you with this problem.

  The BASE DRIVER means that you will not be able to SCAN and other features with the software. You can print only.

  It seems that this printer doesn't have the feature wireless without (external optional accessories). The Laserjet 1022NW printer, had the wireless feature, but you will need to connect to this printer via USB cable.

  '"Click the WHITE STAR if you want to say thank YOU" '

  I hope this helps.

• HP Laserjet 1022n, 1022nw printers shared cannot print

  Hello.

  We have a number of these printers shared on a Windows Server 2003 server for Windows XP clients.

  We use Windows Server 2003 Service Pack 1 on certain print servers and Windows Server 2003 Service Pack 2 on the other.

  Some of them work, but some refuse to work. You will get the first page to print, and then print queue will be for more claim to be printing, when it is not. Restarting the spooler service will reset things. I can't what is different between those who work and those who are not, well on the same network, it seems that no 1022 will work at all. I've tried three different Windows 2003 servers, and they all fail.

  Printer drivers that I use are the last leave the HP website, and I have firmware updated printers also.

  I use a Standard HP TCP/IP port.

  I found that they seem to print correctly if shared on a Windows 2000 Server, but it doesn't really help me.

  Can anyone suggest anything please? We have been obliged to the coil of a number of them out of Windows 2000, but this should be temporary.

  Thank you very much

  Paul.

  Hi Rick.

  I spent some time on this investigation via google but also experiment with the drivers, and it seems that if you be wrapped this printer from a Windows 2003 server and that you have the latest MS patches, then you can print only if you have administrative privileges on the server. It does not matter at the end of the workstation. However, it seems that some of our printers are not affected, and I can't believe that users who continue to print well have administrative privileges on the server.

  Anyway, there is a simple solution to this - use the Laserjet III of the original distribution of XP driver. This driver appears to print very well to the 1022.

  However, it would be nice if HP has acknowledged the problem somewhere and eventually created new drivers. I see no evidence of this on the internet.

  Hope that this workaround works for you.

• LaserJet 1022: Wireless adapter for 1022?

  Is there an adapter to allow printing wireless with a 1022?

  According to the user's Guide here the 1022n and 1022nw built in wireless. http://support.HP.com/us-en/product/HP-LaserJet-1000-Printer-series/439424/model/439431/manuals

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• How can I connect my iMac for HP Laserjet CP2025 El captain

  Connection to HP Laserjet CP2025

  Just replaced my printer laser jet CP2025 with a replacement from eBay (given that it works!)  Previously used one daily for a few years without problem, it of the same model but keeps saying printer idle or not connected, even if it has been folded and selected on the screen.  So, I deleted all of the printers in my preferences that I had amassed 6 different printers and use only 2 BUT now cannot add any back? I use OSX El Capitan on an iMac 2013 end suggestions would be appreciated

  This article should help you to solve the problems of printer on your Mac - Apple Support

• I need the Hp Laserjet M2727nf Hp scanning software

  Need a Hp Laserjet M2727nf Hp scanning software

  You really have a classic Mac, a very old machine now.

• HP Color Laserjet: HP Color LaserJet - lines/stripes

  Hello

  I have a HP color LaserJet and I get a lot of lines and streaks on my printed pages.

  I also note toner inside the printer and my printer seems to take cleaning cycles more than before.

  Thank you!

  Although I work for HP, my posts are MY opinion and not those of HP.

  I would recommend some of the things

  First of all, make sure that your firmware is up-to-date, go to the page software and drivers on HP.com download and install the latest firmware available for the printer.

  Then, make sure that the toner collection unit is not complete

  Finally, print a cleaning of the control panel of the printer page, normally, you should select the following text in the menu:

  • Maintenance of the unit
  • Calibration / cleaning
  • Cleaning page

  You can also view this document as well.

  HP Color LaserJet Enterprise M552, M553 and MFP M577 - lines/stripes, toner and cleaning cycles dust excessive

  Hope that helps.

• Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.

  I can use WIndows 10 if the fix is available for this OS.

  I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.

  Any help would be greatly appreciated.

  Thank you

  Hello

  Install the following firmware for your printer, and then look for a difference:

  http://support.HP.com/us-en/drivers/selfservice/swdetails/HP-Color-LaserJet-MFP-M277-series/7089945/model/7089949/swItemId/kJ-149905-2

  Kind regards

  Shlomi