Trouble getting vMotion to work on dedicated/isolated switch
Hello!
Thank you in advance to anyone who can help me with this.
Ask each of you:
Please let me know what I've not set up right. I'm obviously oblivious to what I have right!
Statement of the issue:
If vMotion is enabled on the interfaces connected to a dedicated switch or isolated, vMotion fails to move to a guest between the host operating system.
Error message:
Details:
-It works perfectly fine if I connect interfaces vMotion enabled shared departmental switch (the same as one who shares the guest OS traffic).
-vSphere 5.1.0 838462
- The switch is a Dell PowerConnect 2816 in managed mode.
-The pressure switch is physically isolated from the rest of my network. The only connected devices are four cables (two each going to the port ethernet on two hosts) and a test for thin ping computer.
-J' followed the VMWare KB article 2007467.
-J' have currently a cable between the switch of vMotion and the company, so that I can connect to the switch and make diagnoses. So if you see the 'Networks' column below showing the 172.20.11.0 network, which is the network of the company, whereas I have assigned each vMotion VMKernel an IP 192.168.0.0.
-J' have a computer connected to the switch (192.168.0.200) and from there I peut ping 192.168.0.1,.2,.3 et.4, which are all addresses IP assigned to each VMKernel port (see screenshots below).
-The Dell PowerConnect switch, I can ping 192.168.0.200 (my test computer), but I can't do all the VMKernal IPs ping port... Strange!
What I tried:
-Delete, then add the vSwitch on each ESXi host, thinking I did something wrong.
-The Dell PowerConnect 2816 resetting to default values, then put up. All I did to the switch is give it an IP 192.168.0.2. I put anything else, such as VLANs, jumbopackets or something else of that nature. He is literally parameters by default only managing what IP added.
-Connect each port ethernet (for vMotion) assigned VMKernal to the corporate switch and vMotion works perfectly.
Screenshots showing the Configuration:
5.1 ESXi host #1 | 5.1 ESXi host #2 |
---|---|
Showing the vSwitch, its two ports of VMKernal and vmnic3 & 5: |
Showing the vSwitch, its two ports of VMKernal and vmnic4 & 5:
Display the general tab of the "vMotion01": VMKernal
Display the general tab of the "vMotion01: VMKernal
Display of the tab grouping of cards NETWORK of VMKernel 'vMotion01 ':
Display of the tab grouping of cards NETWORK of VMKernal 'vMotion01':
Display of the general tab of VMKernel 'vMotion02 ':
Display the general tab of VMkernel "vMotion02:
Display of the tab grouping of cards NETWORK of VMKErnel 'vMotion02 ':
Display of the tab grouping of cards NETWORK of VMKernel 'vMotion02':
-Are you able to get to one of Vmotion of host addresses himself, through CLI (ssh into the host)?
For example, your host is 192.168.0.20 and you ping the vMotion configured on this host which is IP 192.168.0.2 even...
-What the vmkernel gateway?
-you have 2 cables connected to the natachasery that is connected to the vSwitch vMotion, and these 2 cables are on the same pSwitch where 2 the other host cables are connected (which are also connected to the natachasery connected with the vSwitch vMotion on this host)...
Tags: VMware
Similar Questions
-
Have a new Mac computer. Does the migration of my old Mac, who will now be my backup. Having trouble getting my creative cloud running on the new Mac. I tried to download the installer of CreativeCloud but still does not work.
How can I get Creative Cloud works on 2nd new computer please?
Hello
Please use the link below to completely remove the creative Cloud Desktop Application.
Using creative cloud | Uninstall the creative cloud desktop application
Hope this will help you.
Kind regards
Hervé Khare
-
Having trouble getting the voice VLAN on the switch X1052P to work at all
Can someone help me understand how to set up the voice VLAN X1052P? I spent several hours trying to get this working and it does not work. I spent about 4 hours on the phone with a Dell technician that night and he couldn't get it to work and finally gave up. He told me that I had to spend my warranty to ProSupport because he did not know how to solve the problem. What group of *. It's a simple configuration of VLAN. What must be so picky about? In any case...
Setting up the VIRTUAL LAN must be fairly simple, but apparently on this switch is not. The user guide page 406 is not very useful except explaining what the different options. I must admit I am not an expert VLAN so I dunno I've misconfigured something. But remember, Dell technology could not operate either.
Here's my situation... I have VoIP phones on my network connected to a network wall jack. Connected to phones are my computers of users. The computer of the user and its respective VoIP phone, both share the same data cable. Before replacing Cisco managed Internet service provider spend all it worked well. The problem is that they had direct access to our network so I removed the switch and installed the X1052P in its place. I talked to the ISP to let them know what I'm doing and they said everything I had to do was setup VLAN ID: 15 for the voice VLAN because this is the VLAN ID that the router uses to route telephone traffic. Router PSI is also the server DHCP VLAN 15 and issues IP for phones using 172.27.0.0/24 with a DHCP 172.27.0.50 range - 150.
I tried to configure the switch using parameters of VLAN static and settings VLAN voice and neither one also seems to do what I want it to do.
Network administration > VLAN > VLAN static
Network administration > VLAN > Voice VLAN
I activated the profile 'phone' on ports I want to added to the voice VLAN and it does not work. Moreover, 47 the switch port is connected directly to the ISP router and is configured as a trunk with the default port VLAN 1 unidentified and tag VLAN 15. For other ports I tried the general implementation, access and trunk of the parameters on each port to see if I could get something going and still nothing happens. When I set up the ports as General ports VLAN, I made adding VLAN VLAN 1 and VLAN 15 as a VLAN tagged not marked. It still does not.
This is the short story from where I am now. Any help is greatly appreciated.
FYI, as a follow up I finally solved the problem. I hope this information helps someone else that can encounter the same problem.
After buying the ProSupport warranty upgrade ($121 out-of-Pocket mind you) and addressing a total of 4 technicians ProSupport expert technician a 3rd another level (only available via chat message between one of the ProSupport phone technicians and the 3rd Tier expert tech - i.e. I couldn't talk or chat with this person me) the consensus was that the material must be bad. When I bought the X1052P I bought two of them, so the best way to know if it was a bad switch was simply configure the other switch and see if the behavior occurs on this one, too. Well, this switch also restarted each time I assigned the profile 'phone' to more than 13 or 14 ports in the switch. It seems that it was not a hardware problem after all.
I went back to the switch original and tried new things hoping that I could fall on a solution and it turns out that the solution was NOT to use the voice VLAN on the switch. It does not work!
SOLUTION: I set the VLAN ID: 15 manually and no has not assigned any phone profiles to one of the ports. This is how I solved the problem.
So he has bad software on the switch. I tried to see if there are updates of the firmware on the Dell support site, but there is none. Configure manually the phone VLAN was the solution. What a freaking nightmare which turned out to be. Maybe someone in Dell could note this problem and test in-house. And, if you want to compensate me for the 20 + hours I spent working on this problem, which has be great, too.
-
Trouble getting mobile working in LR CC
I have LR CC running on a Windows 7 computer. I try to get the mobile work in LR CC. When I go to your preferences, and the mobile just need me on the web. I got it in the past, and I still see my old pictures on the tablet.
Thank you
I found the problem. The cloud had closed. I rebooted and everything works fine now. Thanks for your time trying to help me with this problem.
-
vMotion works only in a switch and the management
Okay, I reconfigure my network in all of my 3 guests. I had vMotion (via VLAN50) in a vSwitch dedicated using binding rising vmnic0. vMotion between hosts has worked well. It looked like this...
I want to spend vMotion for a vSwitch shared with the management network. So I deleted the vSwitch2 vmnic0 and added to vSwitch4. Then, I created a new port group for vMotion with a new IP address. See below.
In vSwitch4 properties, the management network has vmnic7 as active and vmnic0 as the day before. vMotion is set in front of it. The vSwitch is configured to load balance from the originating virtual port ID.
vMotion does not work between hosts and gets stuck at 14%. I get a timeout between 10.10.50.70 and 10.10.50.71 (another host).
I don't know that my physical switch is configured correctly. I have two ports accepting traffic on the management and vMotion VLAN. If I pass around the allocation of vmnic (sort of management use vmnic0 as active and vmnic7 as before) then I can still ping the IP management. Also, if I move back to vSwitch2 vmnic0, vMotion starts working again so I guess I'm missing something on the side of ESXi.
What Miss me?
Thanks in advance
OK, problem solved. The webex engineer had in my screen and start troubleshooting this.
First of all, vmkping he had the IP address of the new IP address of vMotion to another host, that has failed. Then, he ran 'esxcfg-vmknic - l' and noticed that the old port vMotion group was always enabled. In the graphical interface it has disabled this by going into the properties of the vSwitch2 > vMotion port group and checked the property of vMotion. Then run vmkping, but it has always failed. Back in the GUI, he removed the vSwitch2 completely. Ran vmkping and it worked.
He assumed the problem was vMotion was trying to communicate through the old switch, in spite of remove me the adapters and the engineer vMotion traffic on the port group in this deactivation switch. It is useless for me to keep the old vSwitches, except as a back fall where vMotion failed. Seems I should have been more courageous and just removed them when I was creating the new vSwitch.
-
Having trouble getting Sony Vaio (Windows 7) to twin with Bose soundlink wireless
Bluetooth
Having trouble getting Sony Vaio running Windows 7 to fit with Bose soundlink wireless 591U.
Can not find the necessary drivers
Hello
1 have you tried matching the laptop and the wireless audio link?
2. What is the number of the model of the laptop?
Method 1:
Follow the link below and check if that helps.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/en-us
Method 2:
Follow the link below and check if that helps.
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices (Applicable to Windows 7)
I also suggest you to contact the manufacturer to get the required drivers for the device and install it.
http://worldwide.Bose.com/ProductSupport/en/Web/SoundLink/page.html
http://eSupport.Sony.com/us/Perl/select-System.pl?NOPROD=Yes&Director=home&MDL=59IU&1=3
Automatically get recommended drivers and updates for your hardware
I hope this helps!
-
Out of trouble Getting of track statistics ksh script on opensolaris
Hello
I have trouble getting my own collection stat script to work on opensolaris:
$ pdk/scripts/report-stats.ksh
treatment = 0
twitterq = 0
=====
script:
=====
#! / bin/ksh
Treatment = $(cat /var/tmp/processed-5min.out)
TwitterQ = $(cat /var/tmp/twitter-queries-5min.out)
treated echo = $Processed
echo twitterq = $TwitterQ
====
Rails-stats - plugin.xml:
====
< plugin >
< service name = "I/o Device" >
< config >
< name of option = "script".
Description = "script Collector."
default="PDK/scripts/report-stats.ksh"/ >
< / config >
< name of the filter = 'template '.
value="exec:file=%script%"/ >
< name metric = "availability".
model = "${model}": availability "/ >"
< name metric = 'items processed last 5 Minutes.
category = "FLOW".
model = "${model}: processed" / >
< name metric = "Twitter applications last 5 Minutes.
category = "FLOW".
model = "${model}: twitterq" / >
< / service >
< / plugin >
----
Java $-version
Java version "1.6.0_06".
Java (TM) Platform, Standard Edition for businesses (build 1.6.0_06 - b02)
Java hotspot Server VM (build 10.0 - b22, mixed mode)
Agent appears to be a behavior otherwise.
Pointers are greatly appreciated.
Thank you
/ David
Post edited by: davidkDavid,
pluging looks very good.
You deploy the plugin in the plugins-hq directory and follow the other tips?
http://support.Hyperic.com/display/DOCSHQ32/deploy+pluginMirko
-
Unable to get FaceTime to work on my IPhone 4.
I could not yet get FaceTime to work on my IPhone 4. I have read and followed the many corrections suggested, but to no avail. Someone submitted it might have to do with my A T & T package. I use a "" Pay As You Go "plan." Is this relevant?
Thanks for all the suggestions.
IF you try to use the cell data for a FaceTime call using an iPhone 4, it won't work. With this model, and can use WiFi for FaceTime.
Use FaceTime with your iPhone, iPad or iPod touch - Apple Support
-
How can I get FireFox to work on the first version of the Google ChromeBook? Everytime I open it it said to update or upgrade to FireFox and make it your main page. So I downloaded it and it's open once it is installed, but then a message appears that says "can't stand" search for an application that supports FireFox and its software, or something of the sort. I was sitting here with a full battery when I started and now it is dead... and I still don't have FireFox on my ChromeBook.
What do I do now or how do I get it to work? And if it just simply won't work on a CHromeBook then they need to have that riht out in the open.
Hello
I had a peek in this and was informed that Firefox does not work on Chrome OS.
It is designed and done a little differently from the likes of Windows and Linux and will not support another browser being installed.
-
I have trouble getting my videos and pictures OF my shared albums. Once I shared them, I can't copy or save on my phone.
After you have shared photos and videos, they are always on your phone, unless you delete them.
-
I am a big fan of the Elder Scrolls and uses the new 2.2.9 STEP Setup. They went to the organizer of the Mod (MO) and I can't seem to get my FF working with the mod download things part. I click on the icon "Earth", that takes me immediately to the page file Nexus Mod, but when I choose a file to download after clicking on "Download Manager" I get this error message:
The address was not included
Firefox doesn't know how to open this address, because one of the following protocols (nxm) is not associated with any program or is not allowed in this context.
You may need to install additional software to open this address.The address when clicking "Download Manager" begins with nxm://Skyrim/mods/ the address is such because trying to download with the Manager.
Any help will be greatly appreciated! I pulled out my hair for the last few hours trying to find a solution. I disabled Adblock, other popups blockers and activated the main address in my exception rules. It simply doesn't get it. Ugh!
Thank you in advance!
In order to use nxm: / / links, Nexus Mod Manager must be installed and associated with the Protocol nxm .
Problems with this program to third parties, please see the support forum:
-
Update to Firefox ver 19A thwarted my ability to get java to work
I know that there were MANY messages and answers about java since 7_U_11. At one point, using Windows 7, FF 18 and 7_U_13 java, I was able to get java to work by adding a registry entry pointing to the dll plugin NextGen. However, now that 7_U_15 is out, I again could not get the NextGen plugin to be recognized. I tried just to let java settle and that has not worked. I entered then registry entries appropriate as I did before, and that has not worked. Somewhere in this mess FF upgraded to v 19, and now I can't even 7_U_13 to work as before. I have an XP laptop that is FF v 19 and java 7_U_15 and it works fine.
Is it a Windows 7 problem; a FF issue; or a java problem. I don't have any idea what to try next under the name of all the solutions seem to fail.
Well, apparently, I solved the problem with a registry entry for the next generation plugin. As in the past, the installation of java program could not enter the correct location of the java plugin for mozilla. In versions of java prior to 7_U_15, the incorrect path variable was placed in the entrance of registry HKLM/software/mozillaplugins. However, with 7_U_15 worm the incorrect path variable was placed in the entrance of registry HKLM/software/WOW6432node/mozillaplugins. Once the correct path has been entered, the next generation plugin has been successfully installed after the system restarts.
-
I installed jZip and it crashed Firefox, I tried to restart Firefox, but it wouldn't. I uninstalled jZip, Firefox didn't work; I restarted the computer and it still does not work. I can't use even run Windows to pull up the profiles. Is there something I can do to get Firefox to work again without reinstalling? I really like to use the session restore but its so erased its uninstalled.
Yes to aid,
Start > Search > firefox.exe /ProfileManager {ENTER}
I got to the profiles.
I'm fed up and uninstalled Firefox, when he asked if I wanted to erase all data associated with Firefox I did not and when I reinstalled it straight last session here, I assume that this sort of program file has been damaged and has stopped working. Put it back, fixed everything that was wrong.
-
How can I get javascript to work with version 18 - all boxes checked but still problem
I have WINDOWS 8 (for 2 weeks), Firefox v18. I try to use a banking site that requires javascript, but when I try to use the site, I get "javascript not working (or available).
If I go into Youtube, any video that I take is unable to run - instead I get Flash video screen
I put active Javascript but not difference.
can someone point me in the right direction.
I've reloaded Firefox and reset problem persistsHello, you can try to reproduce this behavior when you start firefox in safe mode, once? If not, perhaps an addon intrudes here...
-
I no longer get suggested words when composing a message text on my iphone 5. How to get back to get this function works
Make sure that the text is on. You can do this on the keyboard (if you have several) by pressing and holding down the button to change between them.
Alternatively you can go to settings > general > keyboard and make sure predictive is turned on (the switch must be green).
If you see the image below, press the small white bar above the buttons T and Y and slide upward slightly.
Maybe you are looking for
-
The question is in the sentence really; I had my open Thunderbird and moved across the screen, how the task pane, that is to say Lightning installs itself to a position behind a tab and a, I don't know how I did it and b, I wish I hadn't.Please can y
-
Satellite L650 - cannot load the Win7 or power up in safe mode
Hi all Depending on the subject, I have the laptop above. When I boot it Win 7 hangs and does not progress. If I do the same in safe mode by pressing the F8 key again the windows is not progress. I get a flash of the blue tho screen at this point, bu
-
Re: Portege R500 unable to connect with Mobilink
I am unable to make a connection using the software of Novatel Mobilink on my new R500. I installed * XP * and installed the relevant downloads on the Toshiba site, i.e.Power RF 3 G v 1.0.1.8 control utilityMobiLink 2.0.2.1.8 vWireless Broadband Mobi
-
time scale is not shown on my chart
Hello This may seem a very stupid question, but I was stuck on this for the last 2 hours and I could not find an answer anywhere else on the forum, so here goes. The timestamp (dt) on my graph will not appear. It shows the whole numbers of samples an
-
My deskjet 3050 exploded online, and I can't print.
My Deskjet 3050 went offline and I tried to connect wireless and it won't. It will not be printed.