Trouble with SSH plugin and 5.0 ESXi hosts...

Similar Questions

• Update Server VC and 5.5 ESXi hosts to update 3 b (Build 3248547)

  I'm in vCenter Server 5.5 and 5.5 ESXi hosts.  Both are updated 3A, patched to version 201510001, which is the build 3116895.  I plan the upgrade of update 3 b (Build 3248547) and I'm a little confused on the question of SSLv3.

  I wonder if this point below ESXi55 U3b & VC 55U3b Known Issues applies to my config:

  ESXi does not automatically added to the inventory of the vCenter servers
  If you install an earlier version of vCenter Server and vSphere Update Manager for ESXi 5.5 updated 3B, then after the task of sanitation, ESXi does not automatically added to the VC inventory. Remediation process never gets done and ESXi State of connection in the VC inventory is presented as disconnected. Solution: When you restart ESXi after reorganization process is started, enable SSLv3 on ESXi (which is disabled by default). This will ensure that ESXi is added to the VC inventory automatically in minutes and sanitation as completed.

  If I'm reading things correctly, upgrade to vCenter Server to 3 b first and then upgrade the ESXi hosts, will avoid lost communication problems.  Can anyone confirm?

  It should be good if you update vCenter first.

  The problem is that pre - U3b vCenter 5.5 forces an SSLv3 connection when connecting to an ESXi host on port 443 (not the reverse). It does this, even if the host ESXi and vCenter SSL/TLS libraries actually support TLS 1.0 + since at least vSphere 4.0.

  So when you update one host to 5.5 U3b, the oldest vCenter again will try to force a connection SSLv3 that will fail, since SSLv3 has been disabled to the host. If you're updating vCenter, first of all, it will initiate a good TLS 1.0 + connection to more similar and updated hosts.

  Here is an explanation of the (pre - U3b) vCenter SSLv3 handshake behavior:

  Re: vCenter and host communication SSL v3

• Trouble with the pivot and the columns that contain numbers/spaces

  Hello
  
  I have trouble with the pivot statement.
  How could I do this just for columns that are numbers?
  How could I do this just for columns that contain spaces?
  
  Can someone please help?
  
  
  based on the documentation of Carsten Czarski
  http://SQL-PLSQL-de.blogspot.com/2007/08/kreuztabellen-in-Oracle11g-SQL-pivot.html
  
  essentially to help:
  --------------------
  Select deptno, sum (clerk), sum (salesman), sum (manager)
  of (emp) pivot
  Sum (SAL) of EMPLOYMENT
  in ("CLERK" as a 'CLERK', 'SELLER' as 'SELLER', 'MANAGER' as 'MANAGER')
  )
  Deptno group
  --------------------
  DEPTNO SUM (CLERK) SUM (SALESMAN) SUM (MANAGER)
  ---------- ---------- ------------- ------------
  30 950 5600 2850
  20 1900 2975
  10-1300-2450
  
  
  
  I tried to run at my own table:
  
  NAME MONAT WERT
  -------------------------------------------------- ---------- ----------
  5 Antarctica 404,84
  Asia 7 106,41
  Oceana 2 456,96
  4 the Europe 426,23
  9 Antarctic 537,56
  Europe 9 832,58
  The South America 12 662,41
  Europe 4 422,27
  America of the North 7 312,19
  America of the North 10 148,92
  
  10 selected lines.
  
  
  But running:
  --------------------
  SELECT name, sum (1), sum (2), sum (3), sum (4), sum (5), sum (6), sum (7), sum (8), sum (9), sum (10), sum (11), sum (12)
  (pivot) apex_wksp.demo_pivot2
  Sum (Wert) for monat
  in ('1 ', '2', ' 3', '4 ', '5', '6', '7',' 8 ', ' 9',' 10', ' 11 ', ' 12')
  )
  Group by name
  ;
  --------------------
  led to:
  Antarctica 1 2 3 4 5 6 7 8 9 10 11 12
  North America 1 2 3 4 5 6 7 8 9 10 11 12
  Oceana 1 2 3 4 5 6 7 8 9 10 11 12
  The South America 1 2 3 4 5 6 7 8 9 10 11 12
  Europe 1 2 3 4 5 6 7 8 9 10 11 12
  Asia 1 2 3 4 5 6 7 8 9 10 11 12
  6 selected lines.
  
  
  not quite what I expected.
  
  
  
  
  
  In addition,
  --------------------
  Select monat, sum (Antarctica), sum (North America), sum (Oceana), sum (South America), sum (Europe), sum (Asia)
  (pivot) apex_wksp.demo_pivot2
  Sum (Wert) name
  ("Antarctic", "North America", "Oceana", "South America", "Europe", "Asia")
  )
  Group by name
  ;
  ---------------------
  ORA 907 results
  
  
  
  I know what the problem is - but how do I do it right?
  
  
  using double quotes or replace (ing) space with just underscores seems to garble sql for the unreadable.
  
  
  
  
  Help, please.
  
  
  
  Thanks in advance,
  Michael Weinberger

  Attention to the rotated default column alias:

  SQL> with demo_pivot2 as (
    2                       select 'Antarctica' name,5 monat,404.84 wert from dual union all
    3                       select 'Asia',7,106.41 from dual union all
    4                       select 'Oceana',2,456.96 from dual union all
    5                       select 'Europe',4,426.23 from dual union all
    6                       select 'Antarctica',9,537.56 from dual union all
    7                       select 'Europe',9,832.58 from dual union all
    8                       select 'South America',12,662.41 from dual union all
    9                       select 'Europe',4,422.27 from dual union all
   10                       select 'North America',7,312.19 from dual union all
   11                       select 'North America',10,148.92 from dual
   12                      )
   13  select name, sum("'1'"),sum("'2'"),sum("'3'"),sum("'4'"),sum("'5'"),sum("'6'"),sum("'7'"),sum("'8'"),sum("'9'"),sum("'10'"),sum("'11'"),sum("'12'")
   14  from demo_pivot2 PIVOT (
   15  sum(wert) for monat
   16  in ('1','2','3','4','5','6','7','8','9','10','11','12')
   17  )
   18  group by name
   19  ;
  
  NAME          SUM("'1'") SUM("'2'") SUM("'3'") SUM("'4'") SUM("'5'") SUM("'6'") SUM("'7'") SUM("'8'") SUM("'9'") SUM("'10'") SUM("'11'") SUM("'12'")
  ------------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ---------- ----------- ----------- -----------
  Antarctica                                                    404.84                                      537.56
  North America                                                                       312.19                            148.92
  Oceana                       456.96
  South America                                                                                                                                 662.41
  Europe                                              848.5                                                 832.58
  Asia                                                                                106.41
  
  6 rows selected.
  
  SQL> 
  

  SY.

• Attempt vSwitch configuration change and now the ESXi host and virtual machines offline

  So I have no doubt, I have myself to blame for this one. I was trying to change my vSwitch from 100 Mbps to 1000 Mbps when an 'operation timed' error out jumps-to the top and my vCenter Server lost connection with my ESXi host. I tried to restart the host manually, but that did not help. The host is not the ping requests and all the virtual machines on that host are offline; None of them vMotion off to my other ESX Server.

  I tried to reconnect the host computer in vCenter, but it is obviously does not connect because it can't ping it. I logged the ESXi console and all the network settings appear to be correct. I'm used to connect to the ESX console where you can execute commands, but it's my first ESXi host, so I don't know what I can do.

  Any help is greatly appreciated!

  -D.

  If you had your management port and VMs on different vSwitches / NIC leave on framework would eliminate a false positive. As in your case the management port reportedly follows the cable / about speed, but the virtual machine network would be intact (and I'm assuming that your storage space as well).  In this case the VMs system would have worked very well even if the management port did not work.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Create new vCenter and move the ESXi hosts

  Hello

  I created a new vCenter vCenter apparatus using ISO 6.

  The deployment went well and I have all the installation program. I would now like to move hosts our old vCenter to new ESXi.

  I was reading this article to start the moving process.

  When I try to disconnect the host I get the message below

  

  In the article in the link above it is written that it will not affect the State of the virtual machine running on the host.

  If I click on 'Yes' here, it will automatically put the host in maintenance mode?

  I prefer not to do it if I can avoid it because I don't want to have to evacuate all virtual machines running on the esxi host.

  Wouldn't it be better if I disabled it HA first? Then try to move hosts? Or I'm sure to sign-out and the subsequent removal?

  Thank you

  See you soon

  Hello

  You must put your server in maintenance as a first step mode, then unplug and remove the server. It will work.

  If it doesn't work, disable temporary HA and remove your host of the VC.

• Trouble with the voice and data Vlan vlan translate between CT3905 and SF300 - 24 p

  Hey actually, we have the solution to monitoring of implementation with CT3905 phone, SF300 - switches 24 p cameras and AIR-AP1041N Access Points

  

  We have the problem with the vlan tag in SF300 switch ports - 24 p we can´t tag vlan of the voice and data VLANs on the same port on SF300 - 24 p it is Possible or we must dedicate a port for each VLAN or ussing the same data segment of VLANs and vlan voice?

  Someone has an answer or technical documentation that can help us

  Best regards

  First of all,

  Please disable lldp transmit in SF 300 switch.

  The command is "no lldp transmitted."

  After you disable check the following steps.

  https://supportforums.Cisco.com/docs/doc-27005

  facing the same problem with cisco SG 300 and 3905 ip phone switch.

  And nested thing was my 7945 and 6941 phones use to work properly, without above configuration.

  Cisco 3905 became not vlan Ip address votes and even if I put static, it did not work.

  After a long struggle, I was able to solve the problem. Now both phone and system work fine in the same port.

  Samantha

• Beginner jQuery is having trouble with the links and the page redirect and page caching.

  Hi all

  I'm trying to update an old legacy of multipage site (each page has headers html etc.), adding jQuery Mobile. Most of the time it goes well, but I'm having some problems with the links, the redirect of the page, and caching.

  I write javascript like this...

  < script >

  -do things - then-

  Window.Location.Replace ("Page1.html");

  < /script >

  and links like this

  
  

  < a class = "-ui ui-btn-b btn tsize1" href = "page2.html" rel = "external" > page 2 < /a > "

  
  

  CACHING ISSUES

  
  

  On many pages - such as those that I have problems with, I've added no caching of code as...

  < head >

  < META HTTP-EQUIV = "Pragma" CONTENT = "no-cache" >

  < META HTTP-EQUIV = "Expires" CONTENT = "-1" >

  ... more...

  < head >

  Problem: for example, I can go to Page 1 and click on a link to go to page 2 and page 2 has the lines "no cache" header. The problem is that a fresh change of page 2 does not appear even with no cache lines above and even if I hit refresh in the browser that I thought it was supposed to reload the page (live get of the site). On the contrary, it seems to continue to see the old content before the update.

  In another case I could be on page 21 and click on a link that goes to the publicationfootnote22 and made a few treatment database and then goes to the page33. In this case, my fees top22 updates are not appearing and showing just the old cache data.

  Q: what is the best way, at least while I am writing code, to force the Page to refresh (non-cache), I can see my updates all the time, because otherwise it becomes very confusing because I'm sure you know.

  Thanks in advance: Dave

  Hi Dave,.

  Are you handy with your developer tools? It's always where I head when I need to look inside something. Before getting anywhere in addition or developed, check the response code you get for the page request and see what is the numeric code. If it is 200, you get a new copy. If it is 304 then your browser is striking the same content or something in your UI is to preserve the previously loaded document fragment.

  Photos make it easy, Chrome this is grabbing a small page for the first time and with disable cache enabled, and we get the status code 200:

  

  If I keep refreshing with "Disable cache" activated so I keep getting GET/200, copy fees.

  However, delete the "disable cache" to speed things up and the server and the client negotiate and check if she even needs to send you the document (if she thinks she's changed), and if not, of course you GET/304, or "load cache:

  

  Whenever I update I get GET/304, hitting the cache.

  Make sure your requests are GET/200 if you expect not to be cached.

• Plugin MAC AE: Bundle with the plugin and access for running scripts

  Hello

  as the title says I am trying to run scripts of my plugin, but I can't figure out how to get the location plugins to access pooled resources. I'm pretty new to the development of a plugin so can sombody please point me in the right direction?

  I found in the SDK, the PF_GET_PLATFORM_DATA guide, but there is no example that he uses.

  Thanks in advance

  Fabian

  Try this:

  FILE * file pFile;

  pFile = fopen ("find me yo.txt", "w");

  If (pFile! = NULL) {}

  pFile.close ();

  }

  now, search for "find me yo.txt" and see where it lands you.

• Trouble with the tones and the small details that are not displayed on the screen.

  I use PS as an amateur for a while and have been brushing up on some tutorials and have noticed that some images in tutorials videos are sharper than my own screen of the same image.

  For example, I followed a tutorial with a provided image that uses the halftone filter and changes made to the exact description of the tutorial produces a different result on my screen. My contrast seems to have a threshold down to small details like the strands of hair and on this occasion a thatch of the guy's face. There was a marked difference between the tones in the video than on my screen. (the lack of, in my case).

  I am running a Benq G2000WA on 1680 x 1050.

  Vista / 3GB Ram

  Intel Core 2

  Sapphire ATI x 1650

  What causes this problem?

  I tried Calibrize and it solves nothing.

  Thank you for all the answers.

  The image, he works with in the video is not the same as the one that you posted a link to.  Siena is larger, which means that the model of mixed with the parameters he chose would be relatively smaller.

  -Christmas

• SCP SSH does not not between ESXi hosts

  Hello

  I have two servers ESXi 5, both I can access via ssh (putty) but I have if try invites one of the other ESXi ESXi5 I can´t access, my ping works, I try to use SCP between two but don t work, the error message:

  ~ # ssh 192.168.0.251
  SSH: connect to host 192.168.0.251 port 22: connection timed out
  ~ # scp /tmp/testescp.txt [email protected]: / tmp

  SSH: connect to host 192.168.0.251 port 22: connection timed out

  interruption of the connection

  PING 192.168.0.251 (192.168.0.251): 56 data bytes

  64 bytes of 192.168.0.251: icmp_seq = 0 ttl = 64 time = 0,157 ms

  64 bytes of 192.168.0.251: icmp_seq = 1 ttl = 64 time = 0,214 ms

  64 bytes of 192.168.0.251: icmp_seq = 2 ttl = 64 time = 0,187 ms

  -192.168.0.251 - ping statistics

  3 packets transmitted, 3 packets received, 0% packet loss

  round-trip min/avg/max = 0.157/0.186/0.214 ms

  SSH is enabled.

  I can connect using PuTTY or Winscp from a windows machine.

  Is there anyone sugestion?

  Copied from this thread;

  http://communities.VMware.com/message/2067067#2067067

  You must open the ssh ports in the firewall of ESXi.

  In vSphere Client check the host-> Configuration-> Security Profile-> Firewall-> properties

  and select "SSH Client" If you need to scp connections outgoing resp. "SSH server" If you want to enable incoming connections to PCs.

• List of ESXi host and data managing paths

  can someone help me with a script to list the ESXi host name, then their data management of path for each data store that they are connected to?

  Thank you

  MikeP

  Sorry, I thought you ment the other script.

  Try it like this

  Write-Host "Connecting to vCenter" $VCent = "10.2.160.250" Connect-VIServer $VCent -user user -password passwd $VMHosts = Get-VMHost | Sort-Object Name Disconnect-VIServer -Server $VCent -Confirm:$False 
  
  $report = @()
  
  ForEach ($VMHost in $VMHosts)
  {
      $HostName = $VMHost.Name
      Connect-VIServer $HostName -User root -password passwd    $esxcli = Get-EsxCli  -VMHost $HostName    $esxcli.corestorage.device.list() |
      where {$_.IsLocal -eq "false" -and $_.DeviceType -eq "Direct-Access" -and $_.MultipathPlugin -eq "NMP"} | %{
           $report += ($_ | Select @{N="Host";E={$hostName}},Device, MultipathPlugin)
      }
      Disconnect-VIServer -Server $HostName -Confirm:$False}
  
  $report | Export-Csv "C:\report.csv" -NoTypeInformation -UseCulture
  

  You can try to change the Where clause to see all the plugins multipath.

      where {$_.IsLocal -eq "false" -and $_.DeviceType -eq "Direct-Access"} | %{
  

• LifeCam HD-6000 wrong with the audio and video lag during playback, also a problem with the autofocus.

  I have a Lifecam HD-6000 laptop. Since the first day, I had trouble with the audio and video lag during playback. It cuts sometimes several seconds each time. Any program I opened to view it. Windows Media Center, Real Player, Media Player Classic, etc.

  There is also a problem with the autofocus. It will randomly in and out of focus, more spoil videos that I do. Any help with all these problems? I've updated all audio cards, drivers, etc. I am running Windows Vista.

  Thank you.

  Hi thebuell4,

  ·         Did you do changes on the computer before the show?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the link step 7 to return the computer to a Normal startupmode.

  Method 2: Install the latest software/drivers for the lifecam.

  http://www.Microsoft.com/hardware/en-us/d/LifeCam-HD-6000-for-notebooks

  Method 3: Follow the steps in the article.

  Image of LifeCam guard auto setting very frequently

  For reference:

  The problems of compatibility between LifeCam and other programs

• Help, wanted to make an interactive 3D with Flash cs5 and 3Ds Max

  Hello, I'm newbie here. I just want an interactive 3D with flash.
  But I'm stuck with the plugins and the steps.
  Some tutorials, said using away3D, but the steps are too complicated, and it using flash builder too...

  I found a plugin he called Swift3D Max, but there is no tutorial for it.
  What is the best? Please help me.

  Yes, you can display a 2d object only when you click on a 3d reveal oppose.  you will need to code for him to appear and to be handled.

• Cannot add ESXi host to vCenter Server

  Hello

  I created a home set up a VMware datacenter for study purposes. I currently have 2 virtual machines: an ESXi host with vCenter Server Appliance deployed on this subject.

  I configured the server vCenter through web interface device and I have connected using vSphere Client.

  I created a data center, but when I try to add a host, I get "ERROR: the request exceeded."
  Connection with vSphere client directly to the ESXi host works.

  I can connect using SSH to the ESXi host.

  I have disabled the firewall on the ESXi host.

  I have read many articles on the kbase but nothing helped me to solve this problem.

  You have any ideas?

  I finally got to understand.

  It seems like my vmware workstation is not connected to the esxi as a physical host in my local network host, and so I was able to ping it unit of vCenter Server (but it worked the other way around, and that's why I thought it was ok).

  After the connection to the physical LAN of VMware workstation settings, everything worked fine.

• 6u2 ESXi host nested on VMware Workstation for Linux referee v12

  Hello all, I have

  I have a lab environment virtual running in VMware Workstation for Linux v12, and my ESXi hosts do not work correctly on one of the virtual networks. All my troubleshooting suggests a problem with nested ESXi hosts that may be a bug, but I want to assure you that I did everything properly first. That's why I post here with the hope that if I made a mistake that maybe someone else can point out he me.

  Physical system

  8 core Intel Xeon 2.1 GHz CPU

  128 GB of RAM

  OS - kernel Linux 64 - bit w/3.19.0-32-generic Linux Mint 17.3 (fully updated from this announcement)

  VMware Workstation 12 Pro - 12.1.1. Build-3770994 (fully updated from this announcement)

  Nested ESXi host VM

  ESXi v6.0.0 (Build 3825889, completely updated from this announcement)

  4 cards 'physical' (only 3 used for now)

  -all use the e1000 NIC hardware virtual, but also tried vmxnet3 NIC with no difference

  -vSwitch0 use vmnic0 & 1 vmnet16 of virtual network in a pair of active / standby

  -vSwitch1 uses vmnic2 on network virtual vmnet18

  -vmk0 used for management on vSwitch0 and vmk1 for iSCSI on vSwitch1

  -"Promiscuous" mode and forged passes enabled on all Port vSwitch groups (activating or turning off these features makes no difference)

  Test performed until now

  I checked that all the IP addresses and network masks used are correct.

  With the help of vmkping I ping other nodes on the network vmnet16 with success.

  With the help of vmkping I tried to ping the other nodes in the network vmnet18, but that has failed.

  I have depolyed other non - ESXi VMs on the vmnet18 network, and they are able to ping each other, but are unable to ping or ping by the ESXI host.

  I tried various material virtual NIC as mentioned before, but without changes in the results.

  I tried to use only local network instead of the vmnet18 guest network segments with no change in results.

  When I find out the status of the network adapters on the ESXi host through vCenter or host incorporated client vmnic0 & 1 time display network information, but vmnic2 shows no networks. Yet, I know that there is a network with different VM communicate on it. Moreover, I was able to get all of this work on a Windows system running 10 Workstation (this is the laptop that my employer gives me with).

  Having built nested ESXi labs on different platforms as well as physical environments in the past, I'm very confused as to why I can't get this special configuration to work. At this point my gut tells me that this is probably a bug any with the nested themselves ESXi hosts. Since I can get all this work on vmnet16 including the management of ESXi hosts and the VCSA that I use, I am sure that my vSwitch configuration is correct (other than the IP address space and vmnic configurations is bascially the same). Because I can get other virtual machines to communicate over the network vmnet18 I don't see how can be a VMware Workstation for the issue physical Linux host. Is there something obvious I'm missing here? I read on the ESXi hosts nested under VMware Workstation after having known problems and bugs with networking. If anyone else has experienced this?

  Thanks for any help others can provide!

  Kind regards

  Patrick

  Well, the problem is now resolved. The problem was what covelli was trying to explain, but I couldn't because the physical host network adapters being mentioned.

  The problem on the Linux host, but it was a problem of permissions with the virtual Ethernet adapters. The following article has the fix:
  With the help of Ethernet virtual cards in Promiscuous Mode on a Linux host (287) | VMware KB

  Even if I launched the workstation under the root user I have yet met this problem and which still makes no sense to me, but change the permissions solve the problem. I was not getting an error message on my Linux Mint and Ubuntu system, but when I tried on a second box of Linux Mint that I just got the error has been generated, and the error message was the above link it contains.

  So, here's what I learned:

  (1) the question has nothing to with a VMware Workstation definition that you can configure.

  (2) the question has nothing to do with a physical network card.
  (3) the question has nothing to do with any vmnic on the nested ESXi host.

  (4) apparently virtual Ethernet adapters are not the correct permissions when created.

  All you have to do to fix this is:

  (1) open a terminal.

  (2) run the command ' sudo chmod a + rw/dev/vmnet * "(don't forget to run this each time that you create a new virtual network).

  You can also create a group, as shown in the link above and simply give this group the correct permissions. Personally, I think it's easier to just give everyone the rw permission.

  I appreciate the help that others have offered. I did not understand what was asked for in previous answers because of the terms that have been used.