Update Server VC and 5.5 ESXi hosts to update 3 b (Build 3248547)

Similar Questions

• Attempt vSwitch configuration change and now the ESXi host and virtual machines offline

  So I have no doubt, I have myself to blame for this one. I was trying to change my vSwitch from 100 Mbps to 1000 Mbps when an 'operation timed' error out jumps-to the top and my vCenter Server lost connection with my ESXi host. I tried to restart the host manually, but that did not help. The host is not the ping requests and all the virtual machines on that host are offline; None of them vMotion off to my other ESX Server.

  I tried to reconnect the host computer in vCenter, but it is obviously does not connect because it can't ping it. I logged the ESXi console and all the network settings appear to be correct. I'm used to connect to the ESX console where you can execute commands, but it's my first ESXi host, so I don't know what I can do.

  Any help is greatly appreciated!

  -D.

  If you had your management port and VMs on different vSwitches / NIC leave on framework would eliminate a false positive. As in your case the management port reportedly follows the cable / about speed, but the virtual machine network would be intact (and I'm assuming that your storage space as well).  In this case the VMs system would have worked very well even if the management port did not work.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• Create new vCenter and move the ESXi hosts

  Hello

  I created a new vCenter vCenter apparatus using ISO 6.

  The deployment went well and I have all the installation program. I would now like to move hosts our old vCenter to new ESXi.

  I was reading this article to start the moving process.

  When I try to disconnect the host I get the message below

  

  In the article in the link above it is written that it will not affect the State of the virtual machine running on the host.

  If I click on 'Yes' here, it will automatically put the host in maintenance mode?

  I prefer not to do it if I can avoid it because I don't want to have to evacuate all virtual machines running on the esxi host.

  Wouldn't it be better if I disabled it HA first? Then try to move hosts? Or I'm sure to sign-out and the subsequent removal?

  Thank you

  See you soon

  Hello

  You must put your server in maintenance as a first step mode, then unplug and remove the server. It will work.

  If it doesn't work, disable temporary HA and remove your host of the VC.

• Trouble with SSH plugin and 5.0 ESXi hosts...

  Hello

  As I migrated my hosts to ESXi 4.1 to ESX5.0 Build 822926, I can't connect to these hosts using the SSH connection plugin.

  I tried with a vCO device version a 4.2 and another with version 5.1, without success.

  The error message is always the same: auth failed.

  But with PuTTY or other SSH client, using the same credentials, it works fine...

  I maybe missed something in the ESX 5.0 configuration?

  Thank you for your help.

  BZ.

  Please check this.

• Update Manager fails during upgrade from 5.0 to 5.5 ESXi host.

  Nice day

  I am trying to upgrade to 5.0 and 5.5 ESXi host using Update Manager. However, when I scan my host I get incompatible error. When I click Details I get the error "unsupported configuration.

  Update Manger newspapers show that SANE_ESX_CONF is not in the host logs see below:

  [11-01-2013 13:40:18:219 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: "SUCCESS", the planned test of "PRECHECK_INITIALIZE", "version esx.conf" found "version esx.conf".

  [11-01-2013 13:40:18:219 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: 'SUCCESS', 'SUPPORTED_ESX_VERSION', wait 4 5' found '5'

  [11-01-2013 13:40:18:219 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: "SUCCESS, test 'SPACE_AVAIL_ISO', expected '347872773', '347872773'.

  [11-01-2013 13:40:18:219 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: "SUCCESS, test 'MEMORY_SIZE', expected '4261412864', '34357448704'.

  [11-01-2013 13:40:18:219 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: "SUCCESS, test 'HARDWARE_VIRTUALIZATION', expected '3', 3'.

  [11-01-2013 13:40:18:219 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: "SUCCESS, test 'CPU_CORES', expected '2', 4'.

  [11-01-2013 13:40:18:219 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: "SUCCESS, test ' 64BIT_LONGMODESTATUS', wait 1', found 1' «»

  [11-01-2013 13:40:18:219 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: ' SUCCESS, 'NXBIT_ENABLED', '1' expected, found test 1'.

  [11-01-2013 13:40:18:220 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: 'ERROR', 'SANE_ESX_CONF', expected 'True' to test, found 'False. '

  [11-01-2013 13:40:18:220 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: 'SUCCESS', the test plan "UNSUPPORTED_DEVICES", ", found"

  [11-01-2013 13:40:18:221 'HostUpgradeScanner' 3544 INFO]  [scannerImpl, 473] PRECHECK script test result: 'ERROR', 'PACKAGE_COMPLIANCE', test

  I tried to reboot the host but still no luck. the search file is the esx.conf file. When I ssh host I find the file here.

  Any help/thoughts is appreciated.

  Thank you!

  -Ali

  Give UUID uppercase. This is not the result we are looking for. It should give the UUID or raise an error.

  Review the allocation of points for answers useful/correct

• Cannot add 6.0 ESXi host to vCenter 6.0

  Hi guys,.
  I'm having a problem where I can not add any ESXi 6.0 host to vCenter 6.0. I can add an ESXi 5.5 without problem.

  I have the error that I get in the vpxd log is:

  2015 06-18 T 16: 36:37.312 + 01:00 info vpxd [03624] [sub Originator@6876 vpxLro = 120602 ca opID =] [VpxLRO] - tache-interne-69093--datacenter-26--vim BEGIN. Datacenter.queryConnectionInfo--524f7656-a68d-ef60-05e7-f24ec8a5f1b5(52359e42-f098-7b77-bc82-0cff38aa6ff9)

  2015 06-18 T 16: 36:37.314 + 01:00 vpxd error [04352] [Originator@6876 = 000001-HttpConnectionPool sub] [ConnectComplete] connection failed for < cs p:0000000008c8bfb0, TCP:192.168.0.12:443 >; CNX: (null), error: class Vmacore::Ssl:SSLException(SSL_Exception:_error:140000DB:SSL_routines:SSL_routines:short_read)

  2015 06-18 T 16: 36:37.314 + 01:00 vpxd error [03624] [sub Originator@6876 = opID httpUtil 120602 ca =] [HttpUtil::ExecuteRequest] error in sending request - SSL Exception: error: 140000DB:SSL routines: SSL routines: short read

  I can ping and resolve all ESXi host and checked the SSL certs and they look good too.

  Any help would be appreciated

  Dougie cordially

  Found the problem as vCenter 6.0 version I was running. I was running an older version of the VC and the current version of ESXi.
  Downloaded the current version and reinstalled and all good.

  Dougie

• Best design for the use of 8 physical network interface cards on a 5.1 ESXi host

  I have 8 physical network cards to work with on and 5.1 ESXi host using Enterprise Plus license.  I need to repair the following traffic:

  Management traffic

  vMotion traffic

  Virtual machine traffic (probably 2 natachasery will suffice for this)

  NFS traffic

  Won't fault tolerance.  Natachasery-how much should I dedicate to NFS, vMotion, and traffic management?  What failover policy I should use (active / active) (active / standby) for each?

  It is business more licensing and vSphere distributed switches are used.

  Thank you

  Yes, I would put the backup in the switch as well as management traffic and vMotion is they use vSS or vDS. The other option would be to reduce your vDS for NFS traffic of 4 natachasery 2 natachasery and then or to add to the existing vDS that contains management and vMotion VM traffic to add it extra bandwidth or create a new vDS with these 2 natachasery. But at the point of my original thought around creating a vDS is based on all of my bandwidth throwing together and then cut it but I want it and do not have to trade around natachasery after the fact. But there are so many different ways to achieve that is the fun part.

• Create notification of a particular hardware for ESXi host problem?

  Hello

  One of our 5.1 ESXi hosts is constantly a hardware problem (with hardware alert status).

  We would like to ask for your opinion

  (1) if we create a notification, should we use 'host' alarm?

  (2) is it possible to send a notification to the staff for this particular host with error alarm "host" other than other ESXi hosts (i.e. send to Tony and Stephen for ESXi host A Harware problem BUT only sent to Tony for another hardware ESXi hosts problem)?

  Your opinion is requested.

  Hello

  No, there is no option to select specific host in a cluster. When you set the alarm, it is fixed for the whole army in the cluster.

• Logical processors against vCPUs per ESXi host

  Hello

  I am watching the host ESXi Configuration of maximum and to matters that I don't know what's the distinction between the logical processors for each ESXi host (160) and vCPUs per ESXi host (2048). Any explanation is greatly appreciated. Thank you!

  Hmm...

  OK I'll try to explain.

  1LCPU can be pinned to several virtual machines.

  If I have 1 quad core CPU, I have 4 LCPUs

  I can create as many virtual machines

  (1) 1 VM with vcpus 1

  (2) 1 VM with 2 vcpus

  (3) 1 VM with 4 vcpus

  1st VM will be pinned to 1 LCPU.

  2nd VM will be pinned on the 2nd, 3rd LCPU.

  3rd VM will be pinned to LCPU 1,2,3,4.

  If the processor reqquest comes from 1 VM and VM 3rd at the same time, she will be the process queue and do accordingly!

  I hope you have it now!

• vCenter Server and Manager on the same virtual machine and on the same host ESXi update that they manage

  Hi all

  I have a question to which I did not respond.

  I have an ESXi 5 on Proliant DL380 G7 server host. I want to install vCenter Server and Manager Update on one of the Server 2008 R2 VM on the same host. I know it's possible, but my question is how Update manager will provide updates to the same ESXi host it will run on? The update is applied every time host must spend in maintenance mode and power off the virtual computer running on this subject which means he'll kill VM where vCenter Server and Update Manager is running and the update will fail right?

  Is that possible at all or the VCS and UM such as a virtual computer operating point is updated to other guests if you have them or vMotion as VM to another host when you want to update the VCS and UM host is running?

  Thanks in advance.

  It will not work.  You will need at least two hosts.  This way you can vMotion the vCenter VM to another host.  From there, you can use VUM.  Otherwise, you will need to patch the host as a stand-alone host.

  See below for patching a standalone host

  http://communities.VMware.com/people/vmroyale/blog/2011/09/15/updating-ESXi-5--single-use-esxcli-how-to

• Access the SMB storage using esxi host and manage with MS server 2008

  Hi there, I know the subject line can be confusing, but I didn't know how to explain what I need in the line object in such a short sentence.

  in any case, I have a storage device SMB, a Promise VTrak M610P, which is attached to a blade server 1U HP through interface channels double Ultra 320 SCSI host. I can't configure the VTrak as a NFS, the only way to access logical drives is connected to a server via the scsi channels and using the operating system to share the drive and the shared disks.

  I would use a server blade with dual ultra 320 SCSI host interface channels and connect the VTrak to this server blade. Then I would install ESXI hypervisor OS 5.5 to this server blade. I want to know is if the ESXI operating system will recognize the logical drives and if I create a virtual machine with MS server 2008 and see if the virtual machine detects logical drives, so that I can share the drives? I hope that I'm supposed to and if I'm not, please let me know what makes no sense, I will do the best to explain it better.

  Thank you

  Andy

  So it turns out that there seems to be something wrong with vClient when you add a hard disk (virtual disk) to a virtual machine of size greater than 4 TB. Article VMware KB: value of range error message when you add more than 4 TB capacity discs in vSphere Client describes this if you encounter this problem, add the hard drive via vSphere CLI, CLI power or vmkfstools. So this seems to be a known issue on vClient. What I ended up doing was using vClient, creation of hard disk, adding to the virtual machine (size of the hard drive is to 5.45) and when I would get the error message on the DiskCapControl out of reach, I would just click OK and then finalize the creation of the hard drive on the virtual machine. Once the process is complete, I selected the virtual machine and noticed that he indeed added a new HDD size 5.45 TB even if he's complained about it. I pulled to the top of the virtual machine with windows server 2008 R2 installed and was able to create a new disk under windows and set it up as a shared drive on the network. Looks like vClient must be updated by VMware and correct this bug, if it's a bug that I think. Thank you for the help vervoort!

• Difference of ESXi hosts between analysis of updates and patches of scene

  Hello

  I have two ESXi hosts with round about 700 applicable patches.

  What is the difference between "stage Patches"und"search for updates"?

  Do I need maintenance mode for the scene fixes?

  Kind regards

  Roland

  

  Hello

  Scan for updates will scan the hosts against the basic lines of patch you have attached to them and to report on the status of this host against the base line, so, essentially, Scan for updates will tell you what patches and updates to your departure are absent from the host if the return "non-compliant" or "compliant" if all patches are already installed.  It can also return 'Unknown' or 'Inconsistent' according to the status of the host and other factors.

  Step will basically copy all files to update and patch that must be installed to the willing host for the conversion, which will be more actually to install patches.  Staging of updates to date does not make service, you don't need to put the host in maintenance mode, while the staging, the host must be in service during the reclamation mode.  You can trigger a reorganization without staging, but the benefit of the staging is, first of all, you will reduce the amount of time that your host is out of action because all patches and updates are already in place in anticipation of final approval, which means that the rehabilitation phase is much faster.

  I hope this helps.

  vM

  -----------------------

  VCAP-DCD / VCAP-DCA / VCP-CLOUD / VCP - DT / VCP5 / VCP4

  -----------------------

  vMustard.com

• How to install and update the vm on linux systems tools and how to join an esxi host in domain

  How to install and update the vm on linux systems tools and how to join an esxi host in domain

  thanq very much boss

• ESXi host bios version and server model number

  Hi all

  I have the script that will display the version of the bios of the esxi host.

  can we add more lines to get the server esxi host (such as Dell R910, R720... model number HP, IBM) with serial numbers. and export it in excel or csv format.

  Script to get the version of the bios is listed below.

  $report = @)

  Get-view ViewType - HostSystem | %{

  $row = "" | SELECT name, "BIOS Version", "BIOS Date"

  $row.name = $_.name

  $biosTemp = ((($_.)) Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | Where {$_.} ({Name: like "* BIOS *"}). Name - split "BIOS") [1] - split "") ""

  $row. "" BIOS version "= $biosTemp [0]

  $row. "" Date of the BIOS ' = $biosTemp [1]

  $report += $row

  }

  $report

  his put Out just like that

  
  

  

  Thanks to all in advance

  This is the version of the firmware of a network card.

  This can be done like this

  Get-view ViewType - HostSystem |

  Select Name,

  @{N = "BIOS Version"; E = {}

  $script: biosTemp = ((($_.)) Runtime.HealthSystemRuntime.SystemHealthInfo.NumericSensorInfo | Where {$_.} ({Name: like "* BIOS *"}). Name - split "BIOS") [1] - split "") ""

  {{$script: biosTemp [0]}},

  @{N = 'BIOS Date'; {E = {$script: biosTemp [1]}},

  @{N = 'Seller'; E={$_. Summary.Hardware.Vendor}},

  @{N = ' series'; E = {}

  $script: esxcli = Get-EsxCli - VMHost $_. Name

  $script: esxcli.hardware.platform.get (). SerialNumber

  }},

  @{N = "Firmware NIC"; E = {}

  $script: esxcli.network.nic.get ('vmnic4') .driverinfo .firmwareversion

  }}

• popular error; An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  Once again; same problem, others have encountered but nothing seems to work.

  An error occurred when opening a virtual disk. Make sure that the converter server and source running machines have network access to the ESX/ESXi hosts source and destination.

  We have 1 physical servers, we need to see. Here is the environment. All 3 separated location, 3 all firewall separated

  1 physical servers

  -Internal IP address; 172.16.160.21
  -FARM Firewall

  vCenter Server

  -Internal IP address; 172.16.1.85

  -Local Office (ALX)

  Location of destination (ESXi host):

  -Internal IP address; 172.16.153.20

  -Firewall ROOMMATE

  
  Already completed:

  VMware KB: disable SSL on VMware Converter Standalone 5.x encryption   SSL disabled in converter-worker

  Firewall are open / Tunnel is open throughout the environment.

  I have attached the logs.

  Thank you very much

  POCEH; Thanks for the reply. But I wouldn't be pulling my gray hair if I knew what the problem was. I understand that there not for the peer but why...?