Troubleshoot the bad connection with router (WRT350N) and Point (WAP4400N) wireless access

Similar Questions

• Windows 7 "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. »

  Get the message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is enabled and running. "I am NOT able to connect to the internet please help. I use Windows 7 OS

  Hi Odile,

  Thanks for posting your question in the Microsoft Community forum.

  It seems that you have a problem with the connection to the Internet and receive the error message "the network connections folder could not retrieve the list of the network adapters on your Machine. Please make sure that the network connections service is active and running".

  
  I imagine the inconvenience that you are experiencing. We are here to help and guide you in the right direction.
  I may need a few more details to better understand the issue.
  1. did you of recent changes on the computer before this problem?
  2 do you have wireless or wired Internet connection?
  Method 1:
  We'll first run check network troubleshooting if this can help.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
  Method 2:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
  Method 3:
  If the problem persists, I suggest you try the procedure described in the article and see if it helps.
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-fix-network-adapter-problems
  For more information, please see the link.
  Why can't I connect to the Internet?
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  Get back to us and let us know the State of the question, I'll be happy to help you. We, at tender Microsoft to excellence.

• Troubleshoot the switch 12 with a projector or VGA monitor Acer

  I connected my Acer Aspire switch 12 to a VGA monitor via a HDMI VGA adapter microphone. The switch 12 sees the second monitor, but seems unable to get a signal to start it. In this respect also disables my wireless and sometimes the mouse as well. I tried the VGA monitor with my MacBook and it works perfectly.

  For me, it's a serious problem, I bought the switch to travel and give presentations in corporate meeting rooms, of which many are still equipped with legacy VGA projectors.

  As a low-power machine, is inherently impossible to connect to a monitor/projector VGA switch 12, or is the problem somewhere else?

  If I had to guess, I would say that the problem lies in the switching on of the conversion your HDMI cable VGA chip. I do not know the specs on the budget for food for the HDMI port, but it is probably marginal for the conduct of the conversion.

• I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up.

  I use a third party inf file when creating a network connection via my USB port. The USB connection will become inadmissible and also cause the laptop hang up. Currently I try to modify the INF file but is seeking a help or suggestions in T/S to this problem. Thank you.

  original title: third party INF problems

  Hi Paul,.

  ·         Why are you using a USB port to create a network connection instead of using an Ethernet connection?

  You can see the following article on how to set up a network.

  How to set up a small network with Windows XP Home Edition (PART 1)

• BAD RESULTS WITH OUTER JOINS AND TABLES WITH A CHECK CONSTRAINT

  HII All,
  Could any such a me when we encounter this bug? Please help me with a simple example so that I can search for them in my PB.
  
  
  Bug:-8447623
  
  Bug / / Desc: BAD RESULTS WITH OUTER JOINS AND TABLES WITH a CHECK CONSTRAINT
  
  
  I ran the outer joins with check queries constraint 11G 11.1.0.7.0 and 10 g 2, but the result is the same. Need to know the scenario where I will face this bug of your experts and people who have already experienced this bug.
  
  
  Version: -.
  

  SQL> select * from v$version;
  
  BANNER
  --------------------------------------------------------------------------------
  Oracle Database 11g Enterprise Edition Release 11.1.0.7.0 - 64bit Production
  PL/SQL Release 11.1.0.7.0 - Production
  CORE    11.1.0.7.0      Production
  TNS for Solaris: Version 11.1.0.7.0 - Production
  NLSRTL Version 11.1.0.7.0 - Production

  Why do you not use the description of the bug test case in Metalink (we obviously can't post it here because it would violate the copyright of Metalink)? Your test case is not a candidate for the elimination of the join, so he did not have the bug.

  Have you really read the description of the bug in Metalink rather than just looking at the title of the bug? The bug itself is quite clear that a query plan that involves the elimination of the join is a necessary condition. The title of bug nothing will never tell the whole story.

  If you try to work through a few tens of thousands of bugs in 11.1.0.7, of which many are not published, trying to determine whether your application would be affected by the bug? Wouldn't be order of magnitude easier to upgrade the application to 11.1.0.7 in a test environment and test the application to see what, if anything, breaks? Understand that the vast majority of the problems that people experience during an upgrade are not the result of bugs - they are the result of changes in behaviour documented as changes in query plans. And among those who encounter bugs, a relatively large fraction of the new variety. Even if you have completed the Herculean task of verifying each bug on your code base, which would not significantly easier upgrade. In addition, at the time wherever you actually performed this analysis, Oracle reportedly released 3 or 4 new versions.

  And at this stage would be unwise to consider an upgrade to 11.2?

  Justin

• When I click on the sign more to open a new tab. The tab opens with bing pg and I hate bing. How can I stop thiis doesn't happen.

  When I click on the sign more to open a new tab. The tab opens with bing pg and I hate bing. How can I stop thiis doesn't happen. I can find nothing to help even had a computer tech friend check.

  Looks like your pref browser.newtab.url has been changed.

  This extension will reset some prefs to the value default - browser.newtab.url - is covered. See "on this add-on" for more details.
  https://addons.Mozilla.org/en-us/Firefox/addon/SearchReset/

  It will run automatically and then disappear.

• After the upgrade Lightroom on a mac. Remove the old version with old catalogs and files?

  Can I remove the old version with old catalogs and files? and what is the best way to go about this? Thanks :))

  Uninstall manually and then manually uninstall Lightroom

• connection problems router WRT310N and wrt54gs * with DSL

  Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

  I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

  A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

  I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

  highlights include:

  (1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

  (2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

  (3) internet connection is fine when I connect to my laptop directly to a dsl modem.

  router 4) implements the home network wireless very well, but with no internet connectivity

  (5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

  I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

  everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

  and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

  so... help?

  still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

  Any ideas on where I'm wrong now?

  Fixed issue...

  in the end, it's a problem between the ISP's modem and the router that they helped me understand.

  My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

  We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

• Office jet pro 8600 connect with router but not recognized on the network

  I just installed new router e1200 lonksys. JO HP 8600 pro connects with the router, but the printer cannot see 8600. IP 169.254.223.37 on said install ip is the placeholder and printer not connected. have restarted once 1000 and tried to reconnect. New router has OMP and thrust of 3 seconds the button on the router. Also failed to connect on the router definition reviews

  8600 worked fine on the old router. Problem started when I connected the router after that cable modem connected then modem vonage. Previous setting was cable - vonanage and wireless router - all worked well then.

  Also downloaded 8600 new complete software after losing the Wi - Fi connection - please help!

  If the Ethernet cable is plugged into the printer, it will disable the wireless radio.

  If this is not the case in the network menu, network by default.  Then, in the same network menu, run the Wireless Setup Wizard.

  If this does not work, we will come on your new router a bit.

• Interruption of the internet connection with WRT54G

  Have had the WRT54G Router for a few years now and has worked perfectly with a cable modem. Went on vacation for 2 weeks and off the modem router and cable. When I came back this week and through the back on I can no longer connect to the internet from one of my laptops via a wireless router. Can get local access from the laptop to the router but not to the internet. Can connect OK from the laptop to the internet via a direct cable modem. Have tried many things, including the upgrade of firmware, automatic reset installation etc, but cannot establish why it suddenly stopped working.

  Any ideas or suggestions would be welcome.

  Do not use the easy set-up.  You need a wired connection between your router and your computer.  Connect to the router using 192.168.1.1 in Internet Explorer.  Leave the username blank and use admin password.  You may need to clone the mac address.

  Set up your wireless connection.  Change the name of the Linksys network to something else.  Go to wireless security and configure wpa encryption. Write down the settings.  You must enter these settings in your wireless connection.

• PC cable loss of internet connection with router WRT160N V2

  I'm new to routers and I just added a router WRT160N (V2).  Wireless through my laptop is great. However, I have 1 PC connected physically to the router. The internet connection is sporadic on this PC. I have "wireless" internet service high speed and sometimes you click internet or check your emails, and there is no internet connection. It seems to be after the PC has been idle for a while. When you click on the internet icon PC on the router not even flashes her - it's like the PC and the router do not speak. If it does not connect, the connection is great. Any help would be appreciated!

  There is a known problem with intermittent connectivity and firmware to build 11 for the WRT160N V2. 11 is the current firmware on the Linksys site. Check if you have 11 build if your router is a V2.
  Downgraded to build 8 fits usually correct these deficiencies, but Linksys told several people that they do not have firmware version 8 to give end users.

  It's ONLY for the WRT160N V2 router. This firmware will not work on WRT160N V1.

  You can find it at http://audipages.com/router/

  Follow download them and instructions to downgrade firmware on this page.

• 'Local only' and 'Limited connectivity' is displayed when I try to connect with my laptop and I can't get online!

  Almost every day for the last 5 months or so, I try to get online and a "local only" or "limited connectivity" appears when trying to connect to my wireless internet.  It seems to do this whenever I try to get when another computer is also about that.  By example, if my mother found on the internet on his computer and I try to get on the internet too it does this thing 'local only' and I can't connect and it launches my mother of the internet too (she also has windows vista).  This seems to be a common problem with vista.  I don't understand all this technique _ so if you know how to fix it please don't try "computer talk" with me-keep simple or explain in detail.

  Hello
   
  Troubleshooting connection problems can be a challenge because there are so many possible causes. First of all, try the following steps:
  Step 1: Diagnose and repair the connection.
  1. open Network Diagnostics by right-clicking the network icon in the notification area, then click on diagnose and repair.
  2. check the result.
   
  Step 2: Uninstall and reinstall the wireless card driver.
  Consult the manufacturer of the wireless device or the system manufacturer's Web site to download the driver of wireless network card.
  1. click on start, type devmgmt.msc and press to enter.
  2. expand network adapters.
  3. right click the network point sup wireless driver and click on uninstall.
  4 restart the computer for changes to take effect.
  5. install the driver for the wireless card and restart the computer.
  6. check connectivity.
   
  The other possible solution for this problem is to install the latest service pack on the computer. Visit this link for more information: http://support.microsoft.com/kb/932063
   
  Try the steps and post back with the results, so that we can help you better.
   
  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• How to set up the 3G connection with "optus" on Portege Z30 - has PT243E

  Hello;

  I'm trying for several days to set up my 3g connection / 4g with my sim card "optus, but I don't not each time."
  I downloaded 'toshiba wireless manager', but my computer does not detect my card.

  Anyone have a solution?

  Thank you

  Try this:

  Remove the SIM card while the device is turned on.
  Then stop it completely, insert the SIM card yet again, and then turn on the laptop with SIM card inserted.

  Then follow this instruction step by step to make the 3G connection:
  How can I configure and set up a 3G connection via the preinstalled Toshiba Wireless Manager?

• OS 6.4.0 - T112 beta 2 loss of the network connection with 2120 v2

  uses 2120 v2 and flashed with os 6.4.0 - t112

  a few hours after the network connection is no longer available and a full power down is necessary to restart.

  It seems that I can't get off at 6.2.4 6.2.5 or 6.3.5 according to the warnings contained in the accompanying note.

  I tried through the management system of the user interface-> settings-> update-> install Firmware section I tried earlier versions with 3 fans does not.

  can I flash with previous versions and then do a factory reset to restore fully?

  Thanks mdgm

  6.4.0 t112 not allow me to choose any mode of collage. and the led lights would not blink when there is data transfer.

  I bite the bullet and thru web gui installed the 6.2.5 rc1, started the factory default reset.

  just a lot of time setting up config and copy data backup from one day to the next. fine looking at this moment with the re installed 6.2.5 rc1.

• USB loses the external connection with hardrive

  Hello

  I have a new HP pavilion touchsmart 15 notebook PC 15 - n058ed with some problems on USB 3.0 in combibation with the Toshiba external hard drive.

  Sometimes, the connection is lost. So backup refuses to go. The message to reformat the drive to use it again.

  The hard drive is still powered. The laptop does not work. Turn off at night.

  Nobody knows what is happening.

  Best regards Jan

  Hello new probably,

  I'm sorry that the solution I linked you was too difficult to understand. I can certainly understand that as the site is not exactly easy to use. I'll give you a few steps to try until find us a solution that works for you. Please, try the steps what I am stating to you below:

  Step 1. In the tile Menu type 'Control Panel'

  Step 2. Click on Control Panel

  Step 3. Click Security / Power Options

  Step 4. Click on change power settings

  Step 5. Click on change advanced power settings

  Step 6. Scroll USB settings and disable the USB selective suspend setting

  This will prevent your system to put the USB drive in mode 'sleep' and should solve your problem. Please if the problem persists re-post and we can try additional steps. Thanks for posting this topic on the Forums of HP. Have a great day!