Try to change the broad relative to the absolute site link

Similar Questions

• "Due to a problem not identified, Windows cannot display Windows Firewall settings" when you try to change the Windows Firewall settings.

  Original title: WINDOWS firewall

  I GET A MESSAGE WHEN I TRY TO CHANGE THE WINDOWS FIREWALL SETTINGS - "DUE TO A PROBLEM NOT IDENTIFIED, WINDOWS CANNOT DISPLAY WINDOWS FIREWALL SETTINGS. HOW CAN I SOLVE THIS PROBLEM?

  IN ADDITION, I USE AVG INTERNET SECURITY 2013 AND THAT THE FIREWALL IS ENABLED AND I SEEM TO BE PROTECTED.

  Documentation AVG Internet Security 2013 States:

  Recommendation:

  Generally it is not recommended to use more than one firewall on a single computer. Computer security is not enhanced if you install several firewalls. It is more likely that some conflicts between these two applications will occur. Therefore, we recommend that you use only one firewall on your computer and disable all others, thus eliminating the risk of potential conflicts and problems related to this.

  You can read the AVG documentation by clicking on this link, and see section 6.5:

  http://AA-download.Avg.com/filedir/doc/AVG_Internet_Security/avg_isc_uma_en_2013_06.PDF
  
  So, if you are using AVG firewall, it's wise to just disable the XP firewall for more than a firewall running at the same time can lead to performance problems.  Choose one or the other, but not both.

  I thought installing AVG would understand this by itself, and you know what to do (used to) but I do not want to install AVG to see.

• Try to change the desktop background / Wallpaper

  I have a Toshiba laptop with Windows Vista Home Premium with service pack 2.  I'm changing my screen/for other background thing than the "all black" that is currently displayed.

  I go to the control panel / personalize appearance and sounds / background screen and double click on the image I want as my desktop wallpaper.  It does not change.  I try pictures everywhere (windows desktop wallpaper / photos / sample images / etc) and get the same result.  It does not change.

  I tried the "related children '... Background screen problems, wallpapers appearing is not in customize display of no help.  I am logged in as administrator.

  Thanks in advance.

  Hi CrazyPizzaJoe,

  Run a scan for malware by installing the tool following "Malwarebytes" from the link: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html

  Make sure that you update the Malwarebytes tool before you run the analysis and then run a full scan and remove if infected files found on the computer.

  After that, open a Notepad and copy the following text and save it as desktop.reg on your desktop

  Windows Registry Editor Version 5.00

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]
  "NoActiveDesktopChanges" = hex: 00, 00, 00, 00
  "NoActiveDesktop" = DWORD: 00000000
  "NoSaveSettings" = DWORD: 00000000
  "ClassicShell" = DWORD: 00000000
  "NoThemesTab" = DWORD: 00000000

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]
  "NoDispAppearancePage" = DWORD: 00000000
  "NoColorChoice" = DWORD: 00000000
  "NoSizeChoice" = DWORD: 00000000
  "NoDispBackgroundPage" = DWORD: 00000000
  "NoDispScrSavPage" = DWORD: 00000000
  "NoDispCPL" = DWORD: 00000000
  "NoVisualStyleChoice" = DWORD: 00000000
  "NoDispSettingsPage" = DWORD: 00000000
  "NoDispScrSavPage" = DWORD: 00000000
  "NoVisualStyleChoice" = DWORD: 00000000
  "NoSizeChoice" = DWORD: 00000000
  'UnadviseClient ' = -.

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop]
  "NoChangingWallPaper" = DWORD: 00000000

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ThemeManager]
  'ThemeActive' = '1 '.
  "DllName" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 c 00, 72, 00, 65, 00, 73, 00, 6f, 00, 75, 00, 72, 00, 63, 00, 65, 00, 73, 00, 5 c,
  00,54,00,68,00,65,00, 6 D, 00, 65, 00, 73, 00, 5 C, 00, 6 C, 6F 75, 00, 00, 00, 61, 00, 5 C, 00,------.
  6 c, 00, 75, 00, 6F, 61, 00, 00, 2nd, 00, 6 d, 00, 73, 00, 73, 00, 74, 00, 79, 00, 6 c 00 65, 00, 73,------.
  00,00,00

  After you save the file on the desktop as doubleclick desktop.reg top and click Yes when prompted and click Ok to confirm, and then restart the computer.

  Then try to change the desktop wallpaper and check.

  Please answer if this helps.

  Kind regards
  David

• When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings

  Hello

  When I opened a NEW TAB, it loads 'Bing' - no matter what I try! especially to try to change the configuration settings!

  (Note I recently installed DivX player / converter / movies.. .is this the cause?)

  Then... on desktop... .double click on Mozilla... .loads ok
  Open a new tab..it loads Bing! & I hate it!

  Ive tried;

  1.Tools - options - addons - extensions & plugins - cant see anything there?
  2. On the small address bar (top right) which allows search engines to be managed - all cleared down except google & yahoo
  3. Tools - tab mix plus options - New Tabs - Load on new tabs set to Home Page (doesnt let me change it - greyed out url (conduit.com - see 5 below)
  4. Tools - tab mix plus options - New Tabs - Load on new tabs set to new tab Page - displays the url below (5) but if I try to edit it reverts back every time
  5. If I enter "about:config" & then "browser.newtab.url" in the URL bar I get
  
  browser.newtab.url;http://search.conduit.com/?ctid=CT3321897&octid=EB_ORIGINAL_CTID&SearchSource=69&CUI=&SSPV=&Lay=1&UM=5&UP=SP88BDE404-3DB6-49C4-97F5-96A64775CC57
  
  - rightclick on the selection and type 'reset' IT WONT CHANGE
  
  please can you help me?
  

  Thank you

  Stuart

  I see no mention of the duct. com in your initial post. It is often a good indication that you will taken place unwanted software.

• When I try to change the search words in the browser, it goes back to the expression of the typed original and does not accept the change

  "When I try to change the words in firefox search does not accept... g e. I type in the search for"Joe Bloggs"and then try to change her search to search for"Joe Bloggs"Football it trying to connect briefly and then displays the results of the previous search" Joe Bloggs "and added words 'Football' no longer appear in the search bar.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• When I try to change the settings for keyword.url in topic: config to make one "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.

  I just installed Firefox 4 today. When I try to change the settings for keyword.url in topic: config to make one "I'm Felling Lucky" Google search, it just resets to chrome://browser-region/locale/region.properties whenever I restart Firefox.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the Add-ons is the cause of the problem (switch to the DEFAULT theme: Tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.

  See:

  • Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

  See also:

  • http://KB.mozillazine.org/Preferences_not_saved

• VB6 crashes when you try to change the power on the DIO state using NIDAQmx.

  When I try to change the power of digital output to a PCI - 6220M cardusing VB6 and NIDAQmx software, my plant of VB6.

  I have request to build a VB6 for the same card read all digital out and analog in, digital.  This app works very well.  I can't just change the power to high status.

  Hello Sir,

  I found a post on our discussion forum to a client who was trying to do the same thing as you and also ran into a crash of VB6. In his case, the accident was caused by an incorrect setting during the call to the function.

  The first part of the post office treats the correct settings. The second part of this post does not apply to your configuration, your type of card that supports under the power state.

  Please keep us informed of your progress.

  Kind regards

  Wouter

  OR Belgium

• FRX Drilldown Viewer Error Message When you try to change the destination printer

  Hello, I have a bit of staff (I'm just technical support) which is affected by the following error message when they try to change the printer output

  in FRX Drilldown Viewer: "error: 0 Cccurred in: APIPrintCommonDialog().

  I hope that some useful information about the system:

  They use the application of visualization FRX exploration down in a Citrix XenDesktop environment. It runs on Windows Server 2008 R2, Enterprise Edition (SP1).

  The OS is a 64-bit version with 8 GB of RAM installed.

  Please feel free to respond with any need for additional information. I tried to search the event logs, but was unable to find anything of use... maybe

  could someone point me in the right direction, it?

  Thank you very much!
  Anthony

  Hello
   
  Thanks for posting the question.
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

   

  I hope this helps.

• 'apply' button is not available when you try to change the resolution

  Original title : too high resolution

  Unable to access the "apply" button when I try to change the resolution - the screen is too big

  CANNOT ACCESS THE BUTTON 'APPLY' WHEN I TRY TO CHANGE THE RESOLUTION - THE SCREEN IS TOO BIG

  There is no need to. Just press enter on your keyboard key. It's the same thing by clicking on the apply/OK button.

• When I try to use the Windows Update link for my XP computer I get a message indicating that the location where the Windows Update stores data has changed and it needs to be repaired. How can I solve this problem?

  When I try to use the Windows Update link for my XP computer and after using Windows Mr. Fix - It, I get a message indicating that the location where the Windows Update stores data has changed and must be repaired. How can I solve this problem?

  I'm not that computer literate and do not understand what needs to be fixed.

  This problem just started a few weeks when I noticed that I had any recent download automatic update that I regularly get. So I tried to do it manually through access via my control panel.

  I use ESET Antivirus Node32 software.

  Hello

  1. What is the error message or an exact error code?

  2 have you made changes on the computer before this problem?

  3. you try to check the updates?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Reset Windows Update components and then try to download the updates.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: http://support.microsoft.com/kb/322756

   

  Method 2:

  File system scan tool checker and then try to press Ctrl + Alt + Delete and check.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe):

  http://support.Microsoft.com/kb/310747

  Please respond with more information so that we could help you more.

• Failed to create the Direct3D device. try to change the resolution or color depth

  When I try to open the game this message is impossible to create the device come direct3d. try to change the resolution or color depth
  Please help me

  Hello

  1. what game are you talking about?

  2. have there been recent changes to the computer before the show?

  I suggest to follow the steps provided and check if it helps.

  DirectDraw or Direct3D option is unavailable: http://support.microsoft.com/kb/191660

  DirectX: Description of the DirectX Diagnostic tool: http://support.microsoft.com/kb/190900/en-us

  Hope this information is useful.

• Windows XP SP3: Access denied error when you try to change the beginning upward in MS CONFIG. Director of applications but I am the administrator.

  original title: access denied errors when you try to change the beginning upward in xp sr CIP 3 msconfig. I am the administrator, please the administrator

  I am a user with privileges under windows xp pro service PAC 3. I recently received an access denied error message acusing me of not being the administrator when I tried to limit the start up programs in msconfig. What should I do these changes in safe mode?

  You have scanned your system for malware? It seems its infected with something. Download ccleaner install / run. Then go to tools / startup. Delete the entries that you want here

• try to change the mode of feeding for a user account, the instructions worked to change the administrator account, but changes do not appear on user accounts.

  On my HP 510 laptop, I want to change the power mode to one of the user accounts.  It cannot be changed of in the user account, so I followed these instructions: log in as administrator, do the selection desired in the list of available eating patterns (Control Panel, Power Options, eating patterns), click on apply, then log in as administrator.  I find that the selected power mode has been applied to the administrator account, but not to one of the user accounts. I tried to change in the user account, but still receive the "access denied" response

  I recently installed Microsoft Security Essentials. My reading of various internet stations indicate that some older antivirus programs may have hindered this process of power management. I was not able to discover how to inactivate Security Essentials, so did not try to change the mode of power without interference from her.

  Another indicated position of the potential interference of the BIOS settings. I don't know how to check if this may be the case. I have MS Windows XP Pro SP3 installed. I have automatic and current updates.

  Thanks for any help, you can suggest.

  Hello

  You can change the setting in see Group Policy for this document:

  http://TechNet.Microsoft.com/en-us/library/cc730920.aspx

  Or change temporarily the user to an admin account, make the changes and then return as a standard user.

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open

  I installed Microsoft Security Essentials today and I'm trying to edit startup programs. Whenever I try to change the settings for startup from the Control Panel, a pop up tells me that I need to activate Windows Defender and open.  However, most of the security will not allow Windows Defender be turned on and I want to change the startup parameters.  How can I accomplish this?

  Hello

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you want to have additional protection against malware using the version FREE of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  And now edit startup in Vista without using Defender programs, use one of the following methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  See you soon.

• Error unknown 0x88982F50 when you try to change the properties of a JPEG file in the Windows Photo Gallery

  I am running Windows Vista Home Premium Service Pack1 and use Windows Photo Gallery to managemy photos. I like the fact that I can integrate tags and ratings in JPEG files.

  I just noticed though, that the tag is no longer to be stored in the JPEG file. I know because when I saw the properties of the file tag information I have in the Windows Photo Gallery is not present. If I try to change the properties directly, I get an error message stating:

  An unexpected error prevented the operation. Make a note of this error code, which might be useful if you get additional help to resolve this problem: 0x88982F50 error: No. Error Description available.

  I checked the file isn't read-only etc.

  I searched Microsoft.com for this error and have found no help. I searched the internet and have seen many forums to raise this issue, but I can't find a solution.

  Note that when I try to fix an image in Windows (eye of harvest/red etc.) Photo Gallery, I also get an error that says I can't save the changes.

  For me, it looks like a component is faulty or missing, but how is it resolved?

  Hi RealPaulus,

  Solution for error 0x88982F50:
  1 open the Task Manager by right-clicking the taskbar
  the bottom of your screen and choose the task manager of
  the menu.

  2. click on the processes tab, along the upper part of the task
  Manager screen.

  3. in the processes tab, select the corresponding button at the bottom left
  of the screen that says "show processes from all users".
  and click on it. Click on 'Continue' in the UAC prompt that
  rises.

  4. the screen should turns off a moment, and then return with
  many more listed processes. Click on the column "command."
  Line"to sort the list and search for:

  "C:\Program Files\Windows Media Player\wmpnetwk.exe"

  Read the description in the next section on:

  Windows Media Sharing Service reader network

  5. click on this process. Click the end «»
  Treat button"at the bottom right of the screen.
  Confirm 'End process' if necessary.

  6 perform the steps 1-5 before opening a Windows Explorer
  window for the first time in the current session.

  Eliminate that a will of the Task Manager process
  Restore Windows Explorer ability to 'see' as well as
  'Add', 'remove' or 'edit' Tags or other properties to a file to
  JPEG files.

  Samantha M S