Try to get the Group Policy settings to apply without the need to restart the system

Similar Questions

• try to get the System Restore Wizard

  I can not enter the system restore.  My camera is broken.  I'm trying to restore.

  Hugh

  Try the last good known Configuration
  http://support.Microsoft.com/kb/307852

  Why do you think that the restoration of the system is the solution to your problem? It may be, but there are many problems that can cause a computer not to start where using the system restore won't help.

  What happens when you try to start your computer? Describe what is happening?

• Group Policy settings prevent put me the pc to sleep

  Hi, someone help with this?

  Previously, I had a Vista PC (as an Admin) I could adjust the monitor turns off after 30 min and get the PC to seelp after 60 min unattended. Whoosh! PC ignites (my fault)

  New pc refurbished, reinstall the old accounts Exchange etc, admin permissions, now group policy doesn't let me define powersaving & sleep options (it is grayed out).

  I am still an admin, but can not change the settings, someone help, suggestions? I have another pc on the network which behaves very well (but I never set fire to that) I have checked the settings and compared between the two, they seem the same, but the Group Policy settings have no sense. Any help gratefully received.

  Thank you

  Sorry, but this is beyond the scope of what we cover in these forums.  For assistance with servers, please post to:http://social.technet.microsoft.com/Forums/en-US/category/windowsserver.

  I hope this helps and that they can help you - I'm fairly certain that they can.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The Group Policy settings do not allow the use of a PIN code at startup Bitlocker Windows 8

  Hello

  I hope you can help.

  I tried to implement the encryption on my new laptop Lenovo Twist with windows 8, but get the following error.

  ERROR: An error has occurred (code 0 x 80310060):
  Group Policy settings do not allow the use of a PIN code start. Please choose a
  other BitLocker startup option.

  I tried to change local policy settings...

  1. Go to Local computer policy > Computer Configuration > administrative templates > Windows components > Bitlocker Drive Encryption > Operating System Drives
  2. Open the key require additional start authentication
  3. Activate this key, then assign the require startup PIN with TPM TPM configure startup PIN

  .. .but always not the same error.

  Help, please. He drives me crazy!

  Hello

  Thanks for choosing Microsoft Community to post your question!

  According to your description, it seems that you have problems with activation PIN code on startup.

  Refer to the suggestions from this link and check.

  http://social.technet.Microsoft.com/forums/en/w7itprosecurity/thread/c3b5e90d-89fd-4e95-AF97-723b045eb41b

  For more help, I suggest you ask your question in the TechNet Forum. http://social.technet.Microsoft.com/forums/en-us/w8itprosecurity/threads

• Changed group policy settings but now Windows is to appear this message to restart again!

  I currently have windows 7 Professional 64 and I changed the settings of group policy to stop this annoying nagging screen pop to the top telling me to restart the computer after an update, but recently he has returned once again, and I made no changes to my group policy settings. Is now without taking into account this Microsoft Group Policy setting and not to say that the only way to avoid this is to disable windows update to install automatically?

  Please repost your question in this forum: http://social.answers.microsoft.com/Forums/en-US/w7security/threads

  Do you not understand that none of the bugs addressed by an update or security vulnerabilities do not take effect until you have restarted?

  You understand that there is other than automatic Automatic Updates settings and that one of these other settings allow you to choose once downloaded updates to update are installed (i.e., so that you will not install an update unless & until you are able to restart)? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Rewrite the query, select below or try to get the necessary O/P

  Hello..
  
  My example of data.,.
  
  Create table customer (name varchar2 (10), telephone1 telephone2 number (10), number of phone3 (10), (10) number, bitwisephone number (10));
  
  Insert into customer values('a',23456,67890,null,12345);
  
  Insert into customer values ('b', 67459,89760,null, 37689);
  
  create table do_not_call (dont_call number (10));
  
  insert into do_not_call values (67890);
  
  insert into do_not_call values (37689);
  
  Question: -.
  --------------
  
  Customer 'a' has value of numbers1 as 23456.check if telephone1 exists in the do_not_call table.
  In fact there is no, so set the bit for numbers1 as "o" like wise search telephone2
  & phone3.after update of the bitwisephone for each client should be as the output below.
  
  
  Need to O/P: -.
  -------------------
  
  name bitwisephone
  
  a 010
  b 001
  
  
  For that matter... I use "any" operator...
  
  
  
  SELECT name, case when numbers1 = all (SELECT dont_call FROM do_not_call) and then put an end to '1' other '0'.
  -case when telephone2 = all (SELECT dont_call FROM do_not_call) and then put an end to '1' other '0'.
  -case when phone3 = all (SELECT dont_call FROM do_not_call) then '1' other '0' end 'Bits '.
  OF THE customer;
  
  
  Is there any other way to get the necessary O/P?
  
  
  Thank you!!
  
  Kind regards
  VijayRajaram.

  Looks like one already answered Re: rewrite the query, select below or try to get the necessary O/P

  with
  customer(name,phone1,phone2,phone3,bitwisephone) as
  (select 'a',23456,67890,12345,null from dual union all
   select 'b',67459,89760,37689,null from dual
  ),
  do_not_call(dont_call) as
  (select 67890 from dual union all
   select 23456 from dual union all
   select 37689 from dual
  )
  select name,
         to_char(mod(trunc(sum(weight)/4),2))||
         to_char(mod(trunc(sum(weight)/2),2))||
         to_char(mod(sum(weight),2)) bitwisephone
    from (select name,phone1 phone,4 weight
            from customer
          union all
          select name,phone2,2
            from customer
          union all
          select name,phone3,1
            from customer
         ) c,
         do_not_call d
   where c.phone = d.dont_call(+)
     and d.dont_call is not null
   group by name
  

  Please do not duplicate messages

  Concerning

  Etbin

• Try to get the listener to the APEX to run in stand-alone mode

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work. We decided to switch to Linux, and now we get questions below on the Linux (Red Hat). Any ideas?
  
  Thank you!
  
  Java $ [oracle@ban-apex-prod apex_listener]-Dapex.port=8070-Dapex.images=/home/orale/apex/images-jar apex.war
  NEWS: Check out: /home/oracle/apex_listener/apex.war
  See: ' java-jar apex.war - help' for a full range of configuration options
  INFO: Extraction to: / tmp/apex
  INFO: Using classpath: file:/tmp/apex/apex/___embedded/start.jar:file:/tmp/apex/apex/WEB-INF/lib/xdb-1 1.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/poi-3.6-20091214.jar:file:/tmp/apex/apex/WEB-INF/lib/apex.jar: file:/tmp/apex/apex/WEB-INF/lib/ojdbc6.jar:file:/tmp/apex/apex/WEB-INF/lib/je-4.0.103.jar:file:/tmp/ap ex/apex/WEB-INF/lib/xmlparserv2-11.2.0.jar:file:/tmp/apex/apex/WEB-INF/lib/ojmisc.jar : file:/tmp/apex/ap ex/WEB-INF/lib/ucp.jar:file:/tmp/apex/apex/WEB-INF/lib/commons-fileupload-1.2.1.jar:
  INFO: From Embedded Web container: / tmp/apex
  December 7, 2011 16:36:55 ___bootstrap. The Deployment Manager deploy
  INFO: Deploy application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 ___bootstrap. The Deployment Manager deploy
  NEWS: deployment application path=/tmp/apex/apex/WEB-INF/web.xml
  December 7, 2011 16:36:56 com.sun.grizzly.Controller logVersion
  INFO: From Grizzly Framework 1.9.18 - o - Wed Dec 07 16:36:56 EAST 2011
  INFO: http://localhost:8070 / apex began.
  December 7, 2011 16:37:02 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized
  at oracle.dbtools.apex.config.ApexConfig.notInitialized(ApexConfig.java:249)
  at oracle.dbtools.apex.config.ApexConfig.getFile(ApexConfig.java:234)
  at oracle.dbtools.apex.config.ApexConfig.exists(ApexConfig.java:63)
  at oracle.dbtools.apex.admin.AdminManager.populateAdminFieldValues(AdminManager.java:868)
  at oracle.dbtools.apex.admin.AdminManager.getFieldMaps(AdminManager.java:841)
  at oracle.dbtools.apex.admin.Admin.displayAdminHTML(Admin.java:164)
  at oracle.dbtools.apex.admin.Admin.displayAdminPage(Admin.java:147)
  at oracle.dbtools.apex.admin.Admin.doGet(Admin.java:50)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)
  
  
  December 7, 2011 16:58:39 com.sun.grizzly.http.servlet.ServletAdapter doService
  SEVERE: service exception:
  oracle.dbtools.rt.service.ServiceLocatorException: there is no defined service
  at oracle.dbtools.rt.service.ServiceLocator.acquireAll(ServiceLocator.java:91)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:74)
  at oracle.dbtools.rt.service.ServiceLocator.acquire(ServiceLocator.java:85)
  at oracle.dbtools.rt.web.HttpEndpointBase.dispatchers(HttpEndpointBase.java:138)
  at oracle.dbtools.rt.web.HttpEndpointBase.service(HttpEndpointBase.java:85)
  at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
  at com.sun.grizzly.http.servlet.FilterChainImpl.doFilter(FilterChainImpl.java:195)
  at com.sun.grizzly.http.servlet.FilterChainImpl.invokeFilterChain(FilterChainImpl.java:139)
  at com.sun.grizzly.http.servlet.ServletAdapter.doService(ServletAdapter.java:376)
  to ___bootstrap. SecureServletAdapter.doService (SecureServletAdapter.java:72)
  at com.sun.grizzly.http.servlet.ServletAdapter.service(ServletAdapter.java:324)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapterChain.service(GrizzlyAdapterChain.java:180)
  at com.sun.grizzly.tcp.http11.GrizzlyAdapter.service(GrizzlyAdapter.java:166)
  at com.sun.grizzly.http.ProcessorTask.invokeAdapter(ProcessorTask.java:791)
  at com.sun.grizzly.http.ProcessorTask.doProcess(ProcessorTask.java:693)
  at com.sun.grizzly.http.ProcessorTask.process(ProcessorTask.java:954)
  at com.sun.grizzly.http.DefaultProtocolFilter.execute(DefaultProtocolFilter.java:170)
  at com.sun.grizzly.DefaultProtocolChain.executeProtocolFilter(DefaultProtocolChain.java:135)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:102)
  at com.sun.grizzly.DefaultProtocolChain.execute(DefaultProtocolChain.java:88)
  at com.sun.grizzly.http.HttpProtocolChain.execute(HttpProtocolChain.java:76)
  at com.sun.grizzly.ProtocolChainContextTask.doCall(ProtocolChainContextTask.java:53)
  at com.sun.grizzly.SelectionKeyContextTask.call(SelectionKeyContextTask.java:57)
  at com.sun.grizzly.ContextTask.run(ContextTask.java:69)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.doWork (AbstractThreadPool.java:330)
  to com.sun.grizzly.util.AbstractThreadPool$ Worker.run (AbstractThreadPool.java:309)
  at java.lang.Thread.run(Thread.java:679)

  Hello

  US aircraft problems try to get the APEX listener running in stand-alone mode on AIX, but that did not work.

  Now, it's a coincidence - Colm just posted on this topic today: {: identifier of the thread = 2318817}
  It is in any case, he started on Linux, so...

  SEVERE: service exception:
  java.lang.IllegalStateException: not yet initialized

  This is the relevant part of your stack trace. You must call http://: 8070/apex/listenerConfigure and complete the initial configuration (mainly the database connection settings) before you can access the APEX for the first time.

  -Udo

• Try to get the code, but it says device saved

  Try to get the code in order to register and get additional codes to pay for services and it says that my drive is already registered. How to fix this? I have not had this code yet. Œuvres of Netflix, but it shows an instant queue of course someone else or gratis. I do not know. Someone help here?

  This a good site thank you never one for all the beautiful work fixed that I'm just getting started

• I get the message "Could not authenticate you" when I try to get the portfolio management

  Original title: portfolio in MSN Money management.

  I get the message "Could not authenticate you" when I try to get the portfolio management and when I try again, the same message is repeated.  What type of authentication is necessary?

  Hello

  I recommend you contact the support team of MSN Money for assistance on this issue.

  http://social.Microsoft.com/forums/en-HK/money/threads

  See also Solution Center-silver

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• When I try I get the windows update error number: 0x8024400A

  When I try I get the windows update error number: 0x8024400A

  Hello

  
  This problem is limited to a particular update or all updates? Thanks for mentioning the number of KB.
   
  
  Follow the suggestions below for a possible solution:
   
  Method 1
  I suggest you consult the site mentioned below:
  Temporary connection related errors may occur when you use Windows Update or Microsoft Update
  http://support.microsoft.com/kb/836941.
  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
   
  Method 2
  If the problem is not solve I suggest you try the procedure described in the link mentioned below.
  You cannot install some programs or updates
  http://support.Microsoft.com/kb/822798
  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/
   
  See the link below and follow the steps suggested to DG_963 on July 1, 2012.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_update/Windows-Update-error-0x8024400a-on-clean-install/4c79d20d-A4B3-4724-A6D8-4a768559038a
   
  Let us know the status of the issue.

• When I try and get the Microsoft Messaging support, he asks me a 20 digit number. When I enter this number, he told me that he is not registered in the country I've selected.

  I have Dell XPS M1330 with windows vista home premium. When I try to get the support of e-mail on the microsoft support site, he asked 20-digit PID number, when I entered that number, it says this PID is not saved in the chosen country, I m from India, I chose India-English. I also tried in the United States, United Kingdom, but whenever he says the same thing. I can't support for the supplied windows pre-loaded with my laptop. I ve the product key and PID number. Pls guide me to do this, my windows is enabled.

  original title: Support of Windows problem

  Reference Dell are responsible for their OEM of Windows versions. Microsoft supports the commercial versions of Windows. I'm not familiar with the details of the software support arrangements, but it is the basis that applies.

  What is the problem?

• I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work this is the messege I get: the system cannot find the environment that was entered

  I have acidently deleted my eviroment. now I can not install anything or change my settings in my control panel. Msconfig does not work. Cannot change network settings. This is the messege I get: the system cannot find the environment that was entered

  Hi kotipelto.

  To better understand the issue, we need the following information:

  Are what environment you referring?  What did you delete?

  Let us know if you can start the computer in safe mode and works as expected.

  Access the menu advanced startup options by turning on your computer and pressing the F8 key before Windows starts. Boot advanced options, select the menu safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode

  If you can start the computer in safe mode, perform the system restore.

  System Restore: System Restore to put the computer's system files to an earlier point in time.

  Search the steps mentioned in the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-sytem-restore

   

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have a HP computer and I try to get the best performance on it

  Dear community,

  I have a HP computer and I try to get the best performance on it, but it does not work. I try to update the drivers and use the memory of storge on USB keys and other stuff like using Microsoft Security Essenticals it is sort of: wered because there is no no way around my problem that way happens to you guys, please I want to just play and have the best performance that I can handle it.

  I think I'll put my memory to 8 GB of Ram or 16 GB of Ram.

  Thanks for your help.

  Original title: Windows 7 HP 2000-369WM

  Hello

  Before upgrade you your RAM, check at HP for the specifications of your computer to see what max amount and type of RAM your motherboard will / can use, or download and run the Crucial Scanner:

  http://www.crucial.com/USA/en/systemscanner

  Also, if you use Windows 7 32 bit, 4GBs is the maximum RAM that can be installed, with the exception of Starter which is 2GBs.

  If you are using Windows 7 64 bit, what are the limits of RAM max for each edition (there is no Starter 64 bit)

  http://Acer.custhelp.com/app/answers/detail/A_ID/2729/~/what-is-the-maximum-amount-of-RAM-memory-supported-by-Windows-7%3F

  Home Basic	8GB
  Home Premium	16GB
  Professional	192GO
  Enterprise	192GO
  Ultimate	192GO

  _________________________________

  And follow these steps to keep your device works properly:

  Search for malicious software with the FREE version of this program.

  This is the right link to download included.

  And does not accept the option "Pay for the version" trial installation

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  You can clean your hard drive using these two methods.

  "Delete files using Disk Cleanup"

  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7

  Using the free CCleaner program:

  http://www.Piriform.com/CCleaner

  In NO case use the registry cleaning Option in CCleaner

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And it is not recommended to use a register or a program of cleaning/TuneUP/utilities they can do more harm to your any good operating system that they claim to be able to do.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  Make sure you have the latest updated drivers:

  Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  What are the other steps, which does not include some of the above:

  "Optimize Windows for better performance.

  http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-7

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  It would be a good idea also run the System File Checker tool to check that everything is correct in the system files.

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  See you soon.

• Try to get the old software to work on Windows 7

  I am trying to run old software on my Windows 7 PC. It's a language program that was given to me recently. When I insert the disc and try to run the program I get the following error message. "the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. "Then I tried to run the program in compatibility mode with the two 95, 98, 2000 and Windows XP however whenever I test with one of these compatibilities nothing happens. Then once I have troubleshoot it tells me I have a question that is "Application Incompatible." Is there anything else I can try to get the program to work?

  Hello

  If you have Windows 7 Professional or ultimate, you can try XP mode...

  http://www.Microsoft.com/Windows/Virtual-PC/

  Tricky