Try to install a printer
HP 110-000z 8.1 Windows 64bits (refurbished
I am trying to install a Hp Officejet 4500 G510n-z. I've tried everything.
1 printer is connected to the United States.
2 there is no error, when I try to install the printer.
3. I went through the hardware configuration.
Could you help me.
Were you installing with the installation of products on this site software:
Tags: HP Printers
Similar Questions
-
Pavilion: try to install my printer for laptop HP with Windows 8
Hello
I am trying to install my printer HP photosmart c4180 to my laptop HP Pavillion (Windows 8 not sure if 32 or 64 bit). I downloaded the software but when I try to install my printer on my laptop via a USB cable, I get an error troubleshooting. I tried to fix this in the solutions offered by HP but can't make it work.
Help, please!
Jackie
Have managed to install the printer.
-
See the title of the question.
* original title - when I try to install the printer, I get the message "the specified port is unknown. This happened after cable tv and cable modem has been installed
Thanks for your help. I am not a comp read and write to do all this. here goes
No printer listed. I deleted all.no ports usbxxx or dot4xxx. several others listed.
Middle neck is the same. Intel
the RT is Windows 2000 or xp.
It's what I expected.
Usbprint.sys figure 54 times more often in documents and settings. also in nt service pack driver PK. Ditto for usbmon.dll.
This is not the case.
1. open Windows Explorer and type C:\Windows\system32 into the address bar.
2. find usbmon.dll
3. right click on this file. Select properties, and then click the Version tab. Is - this version 5.1.2600.5512? If not, is what version?
4. now, go to the C:\Windows\system32\drivers folder
5. what version is the usbprint.sys file?You have a copy of each file in C:\Windows\ServicePackFiles\i386? If so, what are the versions of these files?
If the usbprint.sys and usbmon.dll in C:\Windows\ServicePackFiles\i386 files are identical (or older) versions that the corresponding files in C:\Windows\system32 and C:\Windows\system32\drivers, copy the C:\Windows\ServicePackFiles\i386 files into their appropriate folders. Then restart.
-
original title: help installing a printer
I try to install a printer on my computer and continue to receive an error message indicating that the "software cannot be installed using the command" run as ".". To resolve this problem, he told me to sign out and then sign in as a user with administrative privileges. I am the owner of this computer and that you have had for several years. I need to know how to solve this problem. Can anyone help?
Hello
have you tried right clicking on setup.exe printing software then run as administrator?
-
I try to install my printer HP photosmart series C4500 it error please advice
I try to install my printer HP photosmart series C4500 it error please advice
I try to install my printer HP photosmart series C4500 it error please advice
-
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
I just bought a new laptop with Windows 8 is installed. When I try to install my printer, I get an error saying that there is no driver. Where can I download a driver for this printer and the OS from?
Also, where can I find a list of compatible printers?
Hello
You can use the Windows 8 Compatibility Center to find out if a device is compatible.
Windows Compatibility Center: find updates, drivers, & downloads for Windows 8, Windows RT:
http://www.Microsoft.com/en-us/Windows/compatibility/WinRT/CompatCenter/homeFAQ - Windows Compatibility Center:
http://www.Microsoft.com/en-us/Windows/compatibility/WIN8/CompatCenter/FAQ
Concerning
-
So I try to reinstall a printer on a computer and I get the message that the printer cannot be installed and the environment specified is not valid. It was working a week ago and now it is not. The printer has already been uninstalled, so I'm stumped. Any help would be appreciated.
Printer is HP Laserjet 1020
Hi miket219
I suggest refer you to the below provided the link and download the latest drivers available for Windows XP on the Web site. Check that if the installation of the last driver put up-to-date helps you solve the problem-I hope this helps.
-
How to prevent the faye error message when I try to install my printer 6510 throu hpofficejet
How to prevent the faye error message when I try to install my hpofficejet printer 6510 throu on windows 7
Marcia J Outten-RobinsonHi outten7429,
Follow the steps outlined in the document below.
-
Try to install the printer HP LaserJet 5if gives errror "operation could not be completed.
Win7 + HP LaserJet 5if
Hello, I have instaled windows 7 RC, and I try to add network printer HP LaserJet 5if.
Windows has been find printer, but when he tries to install the driver I see massage:Printer driver has not been installed.
Operation could not be completed (error
0 x 0000002).No idea which can change to install this printer?
Hi kkriss,
Thank you for using answers Forum.
The network printer is connected to a XP computer?
Are either using a 64-bit version of Windows?I suggest visiting the manufacturer's Web site to see if they have Windows 7 drivers or at least Vista drivers.
I also propose to sign in as an administrator to install the printer.
Please let us know if that helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have a printer HP 470 WBT Mobile I try to install on a MacBook Pro running Lion OS X. Apple says I need to go to HP for driver and HP says that I need to go to Apple. Is their a generic driver I can use? The printer is not listed as a printer supported under Lion but the HP Printer Utility SW continues to send a 'Test Page' to the printer and it prints successfully. Any ideas?
We will try to repair the disk permissionsand then check any changes:
1. open the Applications folder.
2. go to the Utilities folder.
3. double-click on disk utility.
4 Select the hard disk that contains the boot volume.
5. go to the first aid tab and select Repair disk permissions.
Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The journal of the progress will tell you when the process is complete.Once done, restart your Mac and try to reinstall the driver printer package package.
Please let me know of any changes,
Shlomi
-
I am according to the support site for Windows 7 compatibility, this printer should install automatically.
When I right click the "unspecified device", there is no option to remove it. -Just "create shortcut", "Troubleshoot" (which is not a problem-same Mr. Fixit is not a problem) and "Properties". Properties shows just like a USB bus controller.
When I try to install it as a local printer, the Epson drivers list does not show my model. I tried to pick a couple of the printers listed, but nothing helped.
Any help will be appreciated
If it is a desktop computer you might want to try a serial port pci card, as the converters can be problomatic.
According to the win7 Compatibility Center, the driver is included in windows update, but unfortunately this info isn't accurate allways.
-
Hi, printer "spooler".
IM using widows vista, I had a problem installing my printer, can not install because that the problem with 'spooler service', followed the advice of microsoft and went to services, a window apears, "windows could not start the spooler service on local computer, error 1075 printing;"the dependency service does not exist or has been marked for deletion"can help you please?
Hello pedro,
We will remove and reinstall the printer:
1. remove the printer from the PC.
2 uninstall the printer from the PC driver.
3 reinstall the printer driver.
4 reinstall the printer.
Also, here are some links about printing reference:
Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
Why can I not print?
http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print
Find and install printer drivers
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers
-
I bought a new Dell laptop and am trying to install my printer Lexmark x 5495 without success. It says installation is not complete in the spooler failed [although it is on auto]. Not being is not technical interest I was not able to completely install the printer.
Have you downloaded the drivers from the Lexmark Web site? If this isn't the case, please do.
Unplug the printer, then install the drivers. Connect the printer when prompted to by the installation wizard. MS - MVP - Elephant Boy computers - don't panic!
-
Try to install the printer HP laserjet 1012
I just got a new computer with windows 7. I tried to install my printer HP laserjet printer HP laserjet 1012. I have the installation disc, but it does not work and the HP site does not list the drivers for this printer. I'm out of luck, or there at - it a way to install this printer. t works fine on windows XP
Users have reported that the Laserjet 1015 driver will work for 32-bit systems with the LJ 1012. In another forum users reported using the Laserjet 3055 PCL5 the 1012 Laserjet driver in x 64 systems.
-
I want to install a Hp deskjet printer downloaded 1000 Hp and installed, software is gone at the end of the installation and can not end spooler spooler running nut or an rpc error. Had a Hp technician to try to set up the printer spooler, but he will not remain in the start mode. I have restored the computer to a previous restore point and reinstall the software of the printer again, but have the same problems.
Hello
What exactly happens when you try to print? Error message? Previous post the exact error message.
Step 1: Run the fix it tool in the following article and check.
Problems printing and printing errors
http://support.Microsoft.com/mats/printing_problems/Step 2: Search for the issue in the clean boot state.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
Reference:
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfigand click OK.The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.
Maybe you are looking for
-
Update for Windows 7 for .NET Framework 1.1
I tried to install Net Framework 1.1 Service Pack 1 on Windows 7 and I get the error 8007066F. Also Office 2007 will not update - error message is 66 a.
-
Migration of database 10g database PDB 12 c classic
Hi allMy Source details:------------------------Oracle 10.2.0.4SPARC Solaris 10Base size of 20GThe database name: ORCLMy target details:------------------------Oracle 12 c (12.1.0.2)SPARC Solaris 10The database name: PDBORCLPlease help me with the co
-
How to get the full browser locale
Hi allI've posted the language of the browser using the #{view.locale.language}, it's for me "fr", "fr". shorter names.I need to display the full name of the locale as 'English', 'French '.Please share if you have an idea.Thank youANU.
-
I create a website for a company that has a portfolio section. '' Portfolio '' is referred to as a main category, with a drop of 5 sectors (education, health, etc.). There are about 3 projects by market sector (child pages). We do not want to have a