Try to install the Vista updates, but getting the 8024200d error code. Help, please!

Similar Questions

• I keep trying to install vista sp1 but get an internal error code: 0v80070002. What can I do to fix this?

  I run MGADiag.exe but I still have the same problem. Thank you very much!

  Keith

  I run MGADiag.exe but I still have the same problem. Thank you very much!

  Keith

  Windows Update Error 80070002
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-Error-80070002

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Perhaps, you must manually download SP1 & SP2 and install even in a clean boot state:

  http://support.Microsoft.com/kb/929135
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  This would eliminate any interference from other programs, etc.

  Instructions for manual installation are included in the links below: -.

  Learn how to install Windows Vista Service Pack 1 (SP1)
  http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

• Try to install Windows Vista KB2904266 and it keeps fault - error code 800F0818

  I tried to install the update of Windows Vista KB2904266 for a few weeks now and it keeps failing. Really, it isn't as if it were still able to install anything - 0% installed.  Then I have a 800F0818 code error update failed.  Other updates were installed successfully, but it will not be installed.  I had others fail too in the past.  I do not understand why some updates install successfully while others do not.

  Q: is- KB2904266 theonly update that fails to install or...?
  Re: [Yes]

  Q: do you reside in Morocco, Libya, Fiji Islands or in the mid-Atlantic area (i.e., UTC - 2)?
  Re: [No.]

  Do not hesitate to leave hidden KB2904266.

• How to fix windows vista update when get massege 80070005 error code

  by updating windows, I'm me massege error code 80070005

  How isolve this problen

  Hello

  You did changes to the computer before the show?

  Please follow the steps below.

  Method 1:

  Run the Microsoft fixit for the link.

  http://support.Microsoft.com/mats/windows_update/

  Method 2:

  Follow the steps in the link.

  http://support.Microsoft.com/kb/968003

• Whenever I try to install these two windows automatic updates, I get the 8024200d error code

  I try to install the KB943411 and KB933928 updated, but I get the 8024200d error code. I'm running on Vista Ultimate (without SP1), and I do it through Windows Update.

  Hi BobTheDude,

  I suggest you to follow these steps and check if it does the work for you:

  ·         Follow the resolution 2 in the article
  http://support.Microsoft.com/kb/947366

  ·         Download and install the latest Windows Vista application compatibility update in the link mentioned below:
  http://support.Microsoft.com/kb/963699

  ·         Rename the Catroot2 folder

  To rename the Catroot2 folder, follow these steps:

  1.	Click Start type cmd and then click OK . Right click on cmd and then click run as administrator .
  2.	At the command prompt, type the following commands and press ENTER after each line: net stop cryptsvc Ren %systemroot%\System32\Catroot2 oldcatroot2 net start cryptsvc output

  ·         Empty the software distribution folder

  1.	Click Start type services.msc , and then click OK . Click right services.msc and then click run as administrator .
  2.	In the Services (Local) pane, click automatic updates , and then click stop .
  3.	Reduce the Services (local) window.
  4.	Select all the contents of the Windows distribution folder, and then delete them. Note By default, the Windows distribution folder is located in the drive : \Windows\SoftwareDistribution folder. At this location, the drive is a placeholder for the drive where Windows is installed.
  5.	Make sure that the Windows distribution folder is empty and enlarge the Services (local) window.
  6.	In the Services (Local) pane, click automatic updates , and then click Start .

  ·         Disable security software

  ·         You can download and install the stand-alone package includes updates that failed
  KB943411 - http://www.microsoft.com/downloads/details.aspx?familyid=A7BB4622-FB21-4769-B29A-7FC7A07D182A&displaylang=en

  KB933928 - http://www.microsoft.com/downloads/details.aspx?FamilyId=DC2AD07B-D5D7-407A-9A0E-3F3D142682D0&displaylang=en

  Please let us know if it helps.

  Thank you and best regards,
  David

• Windows some updates not installed the 646 error code

  Windows some updates not installed the 646 error code

  See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/5300b50a-dfcd-42fb-9785-ab52f2ee1796 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My windows will not update, I get a 80072ee2 error code?

  My windows will not update, I get a 80072ee2 error code?

  I run Vista, and I know there have been some problems with updates in the past, would be Vista the reason why I'm getting this error?

  See you soon

  Kim

  If Windows Update error 80072ee2 during updates, you may need to add the addresses of websites which Windows Update downloads updates to the exceptions to your firewall or 'green list '.

  To add the Windows Update Web sites to a firewall exceptions list

  • Windows Firewall ships with this version of Windows and should already include these sites in the exceptions list. If you are using another firewall, see Help for the software publisher to see how to add these websites to your firewall exceptions list:

    • >

  If the problem persists after these steps, see this

  http://support.Microsoft.com/?kbid=836941>

  UTC/GMT is 15:13 Wednesday, February 1, 2012

• I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

  I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

  I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

  I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

  Product Installation status
  Product: SQL Server Database Services 2005 (MSSMLBIZ)
  (Previous) product version: 3077
  Version of the product (Final):
  Status: failed
  Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
  SQL Express features:
  Error number: 29503
  Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

  I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

  I don't know what to do next.

  Can someone help me?

  Thank you.

  Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install on Vista SP2 KB915597, getting error code 80070670

  Hello

  I tried to update Vista SP2 (with Ko 915597 - an update for the Defender) however it returns an error code of 80070670. What happened two or three times last week. Every time the patch installed ok afterwards. However, it is of course a problem somewhere, but where? I tried to search on the code of error on the net + of this Web site, but nothing helped.

  In addition, Windows stops also recognize my Creative Zen MP3 player. In Device Manager, it appears as an MTP device with a yellow exclamation point and a "this device cannot start (Code 10)". I've especially tried to Fix It, but this requires Windows PowerShell (928439 KB) must be installed and it also settled with a 80070005 error code.

  Sorry if the last piece of info belongs to another forum, but I believe that the problems are related (the same?).

  Hope someone can help, as I'm getting a little frustrated.

  Thank you and best regards
  Martin

  Original title: error code 80070670 (under Vista SP2)

  Hi Robear,
  I disabled Defender because the 3rd party software that I use was recommended to me as being superior to the Defender. But maybe this recommendation is outdated? I disabled Defender during my first installation of Vista, and 'yes' I have updated Defender on the first day without problems so far.

  By the way my system has just updated this morning without any problems with three updates for Vista and one for the office.

  Thank you for your efforts to help me beat this problem,
  Martin

• Windows 7 - trying to install a new update, but get error code 66A

  UH code 66A

  * original title - try to install a new update (update of security for .NET Framework 4) get an error code of 66A, please advise.*

  Please see this thread for answers:

  http://social.answers.Microsoft.com/forums/en/vistawu/thread/1307e399-8997-41c4-9D3B-24f872425148

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• I try to install windows vista professional, but a message that I need a pilot. Where can I find?

  Need professional driver of hard disk for the installation of vista partition.

  I try to install windows vista professional.

  I want to partition the hard drive; However, it says I need a driver.

  Where can I find this driver?

  I have a dell optiplex 360.

  If you still cannot find a BIOS entries to change, try to create a Partition Wizard bootable CD and use it to create a partition.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, Partition recovery after an accidental deletion,
  Convert the partition, partition Explore, Hide partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To complete any task use the "Pending Operations" box at the bottom left.

  J W Stuart: http://www.pagestart.com

• Wount Windows Update, I get that 80244004 error code

  What is windows update error code 80244004? Tryied updating, but he wouldn't, and I got this message.

  Hello

  (1) have you made changes on the computer?

  I suggest you to follow the steps and check if it helps.

  Method 1: You can run the system update tool and then try to install the update. Read the following article.
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821
  
  Method 2: Reset Windows Update components, then check if it helps.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ ) how to back up and restore the registry in Windows.

  Method 3: You try to run the System File Checker tool. Check out the following link.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833
  I hope this helps!

• Cannot install windows vista service pack 1, 57 gives error code

  When you install windows vista service pack 1 that it says code 57 Windows update has encountered an error can someone help please?

  Hello

  (1) what is the exact\complete error message you get?
  (2) remember to make changes to the computer before the question?
   
  See the methods mentioned below and check if that helps.
  Method 1:
  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997
  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
  Note: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.
  Method 2:
  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366
  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.
   
  Note: You should not turn off Windows Firewall unless you have another firewall is enabled. Turning off Windows Firewall may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.
   
  Method 3:
  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/
   
  Hope this information helps.

• When you try to install windows vista update KB955430, I get the error "WindowsUpdate_800F082F."

  Continue to receive attempts to install KB955430 but get the same error and does not install.  Repeated reboots do not help.  This has happened for several months.

  Well, Carl, I have only 2 suggestions at this point.

  1. start a free incident request for updated Windows support on the problem
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  2. because the SP2 has not been installed (or even offered), start a free SP2 (see previous answer) support incident. Who knows? He might be able to help solve what SP2 & KB955430 installed. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When you try to install an automatic update, I get an error Code 52D. What should I do?

  Error messages

  Hello

  Welcome to Microsoft Windows 7 Forum!

  You can try the following steps and check whether the problem is resolved.

  This problem may occur if some of the windows update components are corrupt, so we will try to reset the windows update components and find the number.

  You must follow the link provided below to run the fixit which will automatically fix the problem if you find problems with the fixit, then you can follow the procedure to manually reset Windows component update.

  How to reset the Windows Update components?

  http://support.Microsoft.com/default.aspx/KB/971058

  Once the Windows Update components are reset, try to reinstall updates. To do so,

  1. open Windows Update by clicking the Start button, all programs and then click Windows Update.

  2. click on the settings option to change on the left navigation bar. You will now be on a screen where you will be able to set up how Windows Vista download and install updates on your computer.

  3. Select the option check for updates but let me choose whether to download and install them. When you have finished setting options that you want, press the OK button to save these settings. You will now be at the main screen of Windows Update.

  4. in the left pane, click search for updates, and then wait while Windows searches the latest updates for your computer.

  5. you can then download the updates one or both.

  6. click on install updates to install updates currently selected.

  7. Repeat steps 5 and 6 until you get all the updates you want on your PC.

  For more information about installing the windows updates, see

  Install Windows updates

  http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.