When you try to install windows vista update KB955430, I get the error "WindowsUpdate_800F082F."

Continue to receive attempts to install KB955430 but get the same error and does not install.  Repeated reboots do not help.  This has happened for several months.

Well, Carl, I have only 2 suggestions at this point.

1. start a free incident request for updated Windows support on the problem

2. because the SP2 has not been installed (or even offered), start a free SP2 (see previous answer) support incident. Who knows? He might be able to help solve what SP2 & KB955430 installed. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

Tags: Windows

Similar Questions

  • When you try to install Windows Service pack 3, I get an error code 517.

    Original title: update to Service Pack 3

    When you try to install Windows Service pack 3, I get an error code 517.  What is & how to fix it?


    1. where did you get the service pack 3 for windows vista?
    2. which service pack is currently installed on the computer?

    There is no service pack 3 for windows vista. The latest service pack for vista is service pack 2.

    The following articles could be useful.
    How to obtain the latest Windows Vista service pack
    Service Pack Center

  • Error code 80070005 dt0000 when you try to install Windows Vista updates

    can not get updates to windows vista and tried the fixit program and cannot install the PowerShell program this fixit needs


    Please follow the links below to solve the problem.

    Method 1

    Start your computer in a clean boot


    Note: Make sure that you follow step 7 of the article mentioned above to set the Normal upward Start computer after troubleshooting is completed.

    Once the computer is in a clean boot state try install updates.

    Method 2

    Disable your antivirus software and firewall

    Step 1

    Disable the Antivirus software

    Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Step 2

    Disable the firewall


    Once you have performed the steps in the above links are trying to install the updates.

    Method 3

    You can also try the steps mentioned in the link mentioned below under resolution- I would like to fix it myself.


    Hope this information helps.

  • When you try to remove programs or update something, I get the error message that it cannot find the windows installation program and its usually due to installer is not properly installed.

    I was in Add or remove programs and try to delete a program and he said that he could not reach the RPC and or the installer of windows are not accessible due to the windows installer is not installed properly.

    How to re-install Windows Installer:

    Windows Installer 3.1 Redistributable (v2)

    Windows install 4.5 Redistributable
    (Latest version of Windows Installer)

    Update for Windows XP (KB958655-french)
    Install this update to resolve the issue in MSI Installer 4.5
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=e0735d57-03cc-42e5-823e-60c9efe74aac & amp; amp; displaylang = in & displaylang = in

    Common problems of Windows Installer

    The Windows Installer CleanUp utility (Note: this link has changed the utility he did).


    Never be afraid to ask. This forum has some of the best people in the world to help.

  • get 80071AA7 error code when you try to install windows vista sp1

    get 80071AA7 error code when you try to install windows vista sp1

    The file could not be opened from a transactional point of view, because its identity depends on the result of a unresolved transaction.

    (1) If you have the Vista installation DVD making an 'upgrade on the spot"(aka repair facility)
    How to perform a repair for Vista Installation

    All personal data will be kept. All updates applied previously will need to be reinstalled.

    (2) do a clean reinstall of Vista. All the personal data will NOT be preserved.

    3) click this link to launch a request for assistance from Microsoft by Chat or email: Windows Vista Service Pack 1

  • I get error 80070490 Windows updates when you try to install Windows Vista service pack 2.

    error 8007090

    I keep getting the error 80070490 update of the window when you try to install windows vista service pack 2. help Windows and support suggested that I insert the windows dvd the disk drive but I don't have a disk with my computer. I chose automatic convenience store on the microsoft support site. but I still have the same problem


    Are you sure this is the error Code?

    And not this one?

    It is the opinion of Microsoft about the error code 80070490.

    'You receive a "0 x 80070490" error code when you use Microsoft Update or Windows Update Web sites to install updates'


    Method 1: run (Checksur.exe) system update readiness tool

    1. Download and run the system update readiness tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

      For more information on how to download and run the Checksur.exe tool, click on the number below to view the article in the Microsoft Knowledge Base: 947821


      Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

    2. Try to install updates again.

    Method 2: perform a Windows repair installation

    If method 1 does not resolve this problem, you can perform a repair installation of Windows Vista, Windows Server 2008, Windows 7 or Windows Server 2008 R2. Run a repair installation will restore the current installation of Windows to the version of the installation DVD. It also requires the installation of all the updates that are not included on the installation DVD.

    If you do not have a DVD of Microsoft Vista, you will need to borrow a DVD of Vista Microsoft from a friend or work acquantance to do a repair upgrade Installation.

    "This has occurred as soon as I updated from Windows XP"

    You have the upgrade DVD?

    Here is a tutorial on how to do it:

    "How to perform a repair for Vista Installation"


    See you soon.

  • Error 0 x 80070103 when you try to install windows vista

    I have windows xp media center edition version 2002 with service pack 3, when I try to install windows vista home basic he said: I do not have enough memory for temporary files and I should free space on my drives. What exactly should I do? I don't have much on my computer to begin and I already uninstalled all unnecessary files, I could think of. Any help would be appreciated thanks.

    Hi sargent_bilko,

    Please use the forum for Support of Vista,

    What is your hard drive? Did you check how much free space on your hard drive?
    Please run the Vista Upgrade Advisor before trying to upgrade to identify your problem:


    Let us know the result of Vista Upgrade Advisor, Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Blue error screen "stop0x0000003E" appears when you try to install windows vista (R) service pack 2 - that's what I've shown in after I try to install the update? is this a problem or not?

    The problem I have is listed on the feald above, but there are once more my question: blue screen "stop0x0000003E" error when you try to install the service pack of windows vista (R) 2.

    Free unlimited installation and compatibility support is available for Windows Vista until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • 80070490 error code when you try to install windows vista sp2


    OK to start with I have a 32-bit with sp1 operating system.
    I need help, try to install windows vista sp2. I tried for ages now to make it work, but I quit so I hope you can help me.

    It comes up with error code 80070490 and it says get help with this error so I click it and it says I have to insert a windows dvd?

    SOMEONE HELP!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!


    1. who is the antivirus installed on the computer program?

    2. What are the steps you tried to solve the problem?

    Download and install the update the system analysis tool
    80070490 error when you install Windows Vista SP2 or Windows Server 2008 SP2

    Search for the error message in the event viewer.

    Event Viewer is a tool that displays detailed information about the events important (for example, programs that don't start as expected or updates are downloaded automatically) on your computer. The event viewer can be useful when troubleshooting problems and errors with Windows and other programs.

    For more information, see:

    What are the information contained in the logs of the event (Event Viewer)?


    I hope this helps.
  • I'm Zenith one 733F error Code when I try to install Windows Vista update to SQL Server 2005 (Service Pack 2 KB970895).

    I'm Zenith one 733F error Code when I try to install the latest Windows Vista Update, which is an update to SQL Server 2005 (Service Pack 2 KB970895).  This update has failed several times now.

    I followed the advice given in a separate post in this forum at Ramer49 to perform a selective startup with msconfig to try to run the update with all Microsoft Services disabled.  This does not solve the problem.

    I spent reviewing the logfile under C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log.  The problem highlighted is that the Services of Services SQL2005 database program did not start.  Here is an excerpt from the log file...

    Product Installation status
    Product: SQL Server Database Services 2005 (MSSMLBIZ)
    (Previous) product version: 3077
    Version of the product (Final):
    Status: failed
    Log file: C:\Program Files\Microsoft SQL Server\90\Setup Bootstrap\LOG\Hotfix\SQL9_Hotfix_KB970895_sqlrun_sql.msp.log
    SQL Express features:
    Error number: 29503
    Error description: error MSP: 29503 The SQL Server service could not start. For more information, see the

    I tried to run the problem file (SQL Server MSSMLBIZ) directly by using the Windows administrative tool, but the file does not seem to start successfully.  Event Viewer log contains an error with event ID = 823.

    I don't know what to do next.

    Can someone help me?

    Thank you.

    Take a look at this link as it covers a way to fix this problem. Mike - Engineer Support Microsoft Answers
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Error 0x8007045D when you try to install Windows Vista SP2


    Currently I have Windows Vista SP1 and want to upgrade to service pack 2. When I try to do the update of Windows, I get "error (0x8007045d) Error_IO_DEVICE. I also tried to install it in safe mode, I get the same error message. After having traveled a bit on the internet, I found that it is probably because my HDD is damaged... so I run the chkdsk program...

    The chkdsk program stops at 16%... Step 4 of 5... When 85785 files off 300000something files are done... and it does nothing more. It keep running like this all night, it goes no further.

    Does anyone have any suggestions on what I need to do to successfully install Windows Vista SP2?

    Thanks for your help!

    OK, I started the computer with the Windows CD and I ran chkdsk /f at a command prompt.

    Chkdsk /f found errors it corrects.

    I ran Chkdsk/r... .he got stuck after scanning 85763 files... near the place, he would always get stuck (85785 files)... so I guess it's the same file that crashes chkdsk.

    The good news: I still have a functioning computer.

    The bad news is that I ran the SP2 from windows update in new safe mode and it didn't work... I'm still stuck with my problem.

    I have an extra hard drive... that I ordered from Dell for my girlfriend's computer, his computer died before she could use the player, but it is larger, then the drive of your computer and it is brand new... the only downside is that the player has been implemented for the computer of my girlfriend (pilots and other things) and does not work in my computer. I guess I'll try to format that drive to make it work in my computer... it should fix this and then bad SP2 remedial power very well.

    I guess I have no choice.

    I suggest to remove avg (uninstall) then try sfc/scannow then chkdsk /f several times. a few times, they need more going to make things more

    Microsoft security essentials is a better a v for not update couseing problems.

    You can allways put avg in the back.

    not having is not enouph to free space for temporary files can couse problems too.

  • When you try to install my new Embird program I get the message "this link must be opened with an application, select application. What does that mean?

    Help, I hope that I've not messed up, too bad!

    Help, I have a small embroidery business and have used a program called Embird.  Yesterday, I downloaded an upgrade for this program. It said to uninstall the old program before installing the new, so I did.  Now when I try to install the new one it says this link must be opened with an application, select application.  I have no idea what it means that someone can help me?  I tried to restore the computer to a date prior to just start all over hoping he would restore the old Embird, it says that the file may be damaged and will not work.

    If you were able to 'merge', you have unzipped the file somehow.  What was all the messages when you did the merger?

    Follow these steps:

    1 information about the particular file in question

    Right-click on the downloaded file, and select Properties.  What does say for 'File Type' and what is the 3-letter file extension (after the point)?

    If there is no file extension, find the file using Windows Explorer, and then click Tools > Folder Options > view.  Uncheck "Hide extensions for known file types" and click OK.  Now, look at the file again for the file extension.

    2. test of exe files

    Click Start > run, then type notepad in the "open" box, then click OK
    Didn't open a Notepad window?  If not, what error message do you have?

    Click Start > run, and then type the following in the "Open" box and click OK
    Find notepad.exe (or just Notepad if file extensions are not displayed), and then double-click it.  What is going on?

  • 8007371B error when you try to install Windows Vista SP2.

    Original title: error 8007371B.

    Trying to update SP1 to SP2 via updates for months now, but still get this error. Tried Mr. Fixit and all others. Can someone please.
    Vista 32-bit. Just instaleed new RAm as someone told me that this could be the problem (Crucial recommended). always the same

    Hello. I tried to update SP1 to SP2 for months now, but it still fails. I have tried everything I have asked me to do it through forums but the old thread about this error looking dated 2010 so hopefully someone might have a will.

    The error I get is ERROR_SMI_PRIMITIVE_INSTALLER_FAILED_ (0x8007371c). I ran the SFC tool that highlights errors. The SFC details txt that I could see it was mistakes it (copied below). The question is how can I fix it.

    2012-10-03 19:32:45, Info CSI 00000119 [SR] cannot repair the military record [l:38 {19}] "NlsLexicons000a.dll" Microsoft-Windows-NaturalLanguage6, Version = 6.0.6001.18098, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-10-03 19:32:53, CSI Info 0000011b [SR] cannot repair the military record [l:38 {19}] "NlsLexicons000a.dll" Microsoft-Windows-NaturalLanguage6, Version = 6.0.6001.18098, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
    2012-10-03 19:32:53, CSI Info 0000011 c [SR] this element is referenced by [l:146 {73}] "' Package_1_for_KB955020 ~ 31bf3856ad364e35 ~ x 86 ~ ~ - 2_neutral_GDR" "
    2012-10-03 19:32:59, CSI Info 0000011f [SR] could not reproject corrupted file [ml:520 {260}, l:46 {23}] '------? \C:\Windows\System32"\[l:38{19}]"nlslexicons000a.dll '; source file in the store is also corrupted

    Moved from feedback
    Windows version not specified

    Hi, GMC,

    The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    If the System File Checker tool cannot repair a file, follow these steps:

    1. To a high command prompt, copy and then paste (or type) the following command, and then press ENTER:

      takeown /f

      For example, type takeown /f E:\windows\system32\jscript.dll.

    2. Copy and paste (or type) the following command and press ENTER to grant administrators full access to the file:

      For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

    3. Copy and paste (or type the following command to replace the file with a known good copy of the file):

      For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.


    If you have already performed the emergency repair process and the computer still not working, it may want to make an upgrade of existing installation repair/site.

    Perform an inplace upgrade


  • Get error message not found 0 x 80070490 when you try to install windows vista service pack 2

    Nobody knows anything about error not found 0 x 80070490


    Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until February 26, 2010.

    Microsoft free support for Vista SP2 at the link above.

    See you soon.

    Mick Murphy - Microsoft partner

  • When I try to install windows live 2011 version I get this error code 0 x 80040609, and it will not be upgraded

    It always happens to 97% done then rolls back and nothing is up-to-date, and sound always ask me to upgrade. It's more boring

    Hi wikedanton,

    Access the link below and follow the suggestions provided by Windows Live John D to solve the problem:

    2011 - installation Windows Live Essentials 2011 error code 0 x 80040609

    For further assistance on the Windows Live products, please ask your question in the Windows Live Solution Center.

    Gokul - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

Maybe you are looking for