Try to install Windows 98 then switch to XP

I have an old Emachine T1100 with 512 MB memory and I'm trying to install windows 98 on it, and then upgrade to Windows XP Home edition.

I have the original disc of Windows 98, but when I try to install it continues to come with an error message indicating that a fatal error has occurred and widows was closed down to protect. I also have a disk of Norton ghost, but once again the same message is received. Can't go on the internet with the Emachine T1100 so I use my other computer. I need something I can download and put on a cd and then put that in my Emachine T1100 to fix. Any suggestions would be appreciated.

Sorry my mistake

Tags: Windows

Similar Questions

  • try to install windows 10 Windows 7

    I try to install windows 10 Windows 7 and it keeps just restart in windows 7 and nothing installs, help

    Review:

    Retry the upgrade manually:

    Option 1:

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    How to create an ISO or USB drive.

    Select upgrade this PC now and then click Next

    Option 2:

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader).
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

  • I get the error code 646 when I try to install windows updates.

    I get the error code 646 when I try to install windows updates. I have Windows Vista Home Premium. I disabled my firewall and I still get the error code 646.

    Hello

    Try this 1st to see if it helps, and it should:

    Description of the Patch registration cleanup tool
    http://support.Microsoft.com/kb/976220/

    ------------------------------------------------------

    If necessary :

    Try this - Panel - Windows Updates - on every update that will not be installed - click on the important updates
    or the update itself - double click a view more information (or click top then discovers on the right)

    Those who will take you to a page where you can download the update.

    Or go here and the KBxxxxxx number to download it.

    Download Center - mount the KBxxxxxx.

    Microsoft Download Center
    http://www.Microsoft.com/downloads/en/default.aspx

    Download - SAVE - go to where you put them - click on - RUN AS ADMIN

    Then you can right click on the update in the updates Windows and HIDE.

    If you get an error Installer install this version:

    Windows install 4.5 Redistributable
    http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

    ----------------------------------------------------

    Then run this:

    How to reset the Windows Update components? -a Mr Fixit
    http://support.Microsoft.com/kb/971058

    Description of the system for Windows Vista, Windows Server 2008, update tool and
    for Windows 7
    http://support.Microsoft.com/kb/947821

    ------------------------------------------------------------
    Because these are all Office updates you might get more information if necessary in the Agency of those groups that
    may have experienced the same problem.

    Office newsgroups
    http://www.Microsoft.com/Office/Community/en-us/FlyoutOverview.mspx

    Microsoft.public.office.misc discussions
    http://www.Microsoft.com/communities/newsgroups/list/en-us/default.aspx?DG=Microsoft.public.Office.misc&cat=en_us_01cb749f-c998-4762-8099-df71793c11c7&lang=en&CR=us

    ------------------------------------------------------------

    If necessary you can incident free get reports however the above should take care of it for you.

    Windows updates - free Incident report

    Go here and click on-> Windows Update fails while searching, downloading or installation of updates
    http://support.Microsoft.com/GP/wusupport#tab3

    The security updates, you can get free support Incident report
    http://www.Microsoft.com/protect/resources/support.aspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Error when you try to install Windows XP Service Pack 3: "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this.

    Windows XP SP3 problem

    Recently, I met a problem with my PC and was forced to use the system recovery. Now I'm back to factory settings and try to install Windows XP Service Pack 3 on my computer. Windows Update won't work for me, that whenever I try to update I get [error number: 0x8024400A]. I think it's because I use Service Pack 2, or that's what I concluded after researching the problem, anyway.

    This is not my real concern, however. Because I could not get the update automatically, I tried to download and install the "Windows XP Service Pack 3 Network Installation Package for IT professionals and developers" myself. The first time I did it, I restarted the PC after the installation and was met with "We apologize for the inconvenience, but Windows did not start successfully. A recent hardware or software change might have caused this. "  I went into safe mode and went to a just system restore point before SP3 was installed, but now I don't know how to install it correctly without encountering this problem after reboot. I'm hardly the easy just stick with SP2 when there are potentially important available updates. How can I get Windows Service Pack 3 is installed on my PC?

    It's certainly interesting!

    If the cause of your problem is to have a HP PC with an AMD processor and an original image on your hard drive (and of course it sounds like this is the case), the solution should be to rename the file intelppm.sys and launch the sp37394.exe patch. Once done, the SP3 file that you downloaded from here:
    SHOULD work!
    I'm puzzled why there is no intelppm.sys file in your directory C:\WINDOWS\system32\drivers.
    Since you recently returned to square one with your PC ("return to factory settings"), then you may as well run the patch from this page:
    and try the SP3 Setup file again.
    But, first, let's be absolutely sure that we are both using the same terminology. Please answer the following questions:
    1. have you safely backed up ALL your data?
    2. what method did you use to ride "back to factory settings? I think that your choices have been a destructive restore (full) and a (partial) non-destructive recovery. The first erases the disk and leave you with a pristine image and NOTHING ELSE (which means that all of your programs and data get deleted). The other (which does not always correctly) is supposed to leave programs and data intact.

  • When you try to install Windows Defender I get an error message "Service"Windows Defender"(WINDEFEND) could start. Make sure you have sufficient privileges to start system services.

    Original title: could not start the Service "Windows Defender" (WINDEFEND)

    When you try to install Windows Defender, I get an error message that

    "Service"Windows Defender"(WINDEFEND) was able to start. Make sure you have sufficient privileges to start system services.

    How can I check which privileges I have and I need?

    I noticed in the management of the tasks that Norton symlcsvc.exe ran and I was wondering if it was who collide with the Defender, so I temporarily stopped Symantec process running in the field of Services, but still had the same result, try to run the installation of the Defender.

    Help please

    Hello

    This error message is because you have Norton installed on the computer. See the for more information section below.
    http://www.Symantec.com/business/support/index?page=content&ID=TECH103119&locale=en_US

    Let's try the steps and check them off below if it helps.

    Step 1: You can try to uninstall Norton and then check if the problem persists.
    Note: Reinstall Norton after verification.
    Reference: http://support.microsoft.com/kb/307895

    Step 2: Change the registry value and check.

    a. Click Start, type regedit.exe and press ENTER.
    b. navigate to the following location: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows Defender\
    c. right-click on DisableAntiSpyware, on the right panel, then selectEdit.
    d. enter 0, under value data, and click on the OK button.
    e. close the registry editor.
    f. restart the computer.

    Registry warning:
    Important     this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

    Thanks and greetings
    Umesh P - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

  • Product ID invalid when you try to install Windows XP on VMware.

    XP installation of VMware

    Hello

    I have a PC under win 7. and I am trying to Flash an old router to wireless access point for a spot of dead in my house. To cut a long story short, I need to Flash the router using a software program that does that on XP (I tried the compatibility options in Windows 7 and it does not work). Then I put on the implementation of a virtual machine using VMware and an old copy of XP, I had. However, when I try and install XP I get the error that the product id is not valid. Now, I know that the software is legitimate - it was part of a XP operating system provided with an HP laptop - so my question is how I can get through the installation? I will not buy another XP code - after all I will ever use again once I finished the flash - and for the same price, I could buy a new router!. I just want to save the Earth, a small piece of discharge potential and save myself $20!
    Any help appreciated
    M
     

    Hi MarkPinches,

    Follow the steps in the article.

    You receive an error message after you enter the product key when you try to install Windows XP

    http://support.Microsoft.com/kb/310637

    If the problem persists, contact VMware support for more help and information.

    http://www.VMware.com/support/

    For reference:

    How and when to contact Microsoft and support Customer Service

    http://support.Microsoft.com/kb/295539

  • When I try to install Windows XP Professional on my laptop, I get a blue screen that says "error(C=0000135) found dll gdi32not.

    install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

    original title: I install windws xp profesional sp3 on my loptop and installing installation opens blue skreen and dll error (C = 0000135) gdi32not faund I can't solve this problem

    Hi Vytautassvitojus,

    ·         The computer have any OS installed?

    ·         Are you able to boot to the desktop?

    If you are not able to boot to the desktop and then remove the external devices except the keyboard and mouse, perform a chkdsk from the recovery console and then try to install Windows.

    To run chkdsk from the Windows Recovery console. You can check the links for a description of the Windows XP Recovery Console

    http://support.Microsoft.com/kb/314058

    Important:  If all available hard disk data can be lost when running chkdsk, as the chkdsk attempts to repair the affected area.

    I hope this helps.

  • Error message says cannot be installed. Try to install again and then inform the producer of the program for the Adobe programs Air & simple gadget.

    Original title: impossible to install adobe air or the brighthouses program simple gadget. Stops at the request...

    "When I download Brighthouses ' easy Gadget", it goes into the installation of the application, rolls 3/4 of the way and stops, which gives a message that it can not be installed. Try to install again and then inform the producer of the program '. Three different agents of brighthouse tried to fix this, but no one could. His attempts to install adobe air in the same time and that will end either. I had both programs (Adobe air) and easy Gadget installed for a year before losing them to a blue screen. Since then I have not been able to relocate. Does anyone know why? Driving me crazy.

    Hi Lou,

    (a) you can completely remove the programs Adobe Air & easy gadget by following this link.

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry in Windows:

    How to manually remove programs from the add tool / remove programs

    (b) thereafter, try to download & install programs.

    To download Adobe Air, refer to this link: http://get.adobe.com/air/?promoid=BUIGQ

    To download easy Gadget, refer to this link: http://brighthouse.com/tampa-bay/my-services/app-center/easy-gadget

    Hope the helps of information.
    Please post back and we do know.

  • Try to install Windows Defender says "found Windows Client Protection... »

    Problems installing with "Windows Defender"

    While trying to install the 'Windows defenders' program, I was unable to complete the installation when a message popped up saying; "Found Windows Client Protection. Remove this product and return them to the installation to complete the installation. "I checked my computer for a program called"Windows Client Protection", but found nothing. I'm confused. What should I do to install "Windows defenders?

    My operating system is Window XP, Service Pack 3, 32.

    Hi Mitchjr,

    ·          You have databases of security of Microsoft or Windows live OneCare software installed on the computer?

    If you have two Microsoft Security databases or Windows live OneCare software installed on the computer, you will not be able to install Windows defender on the computer. You will need to uninstall them or do not install Windows defender on the computer.

    If you don't have Microsoft Security Essentials or Windows live OneCare software installed on the computer then you will need temporary deactivation of security software installed on the computer and then try to install Windows defender.

    Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  • Try to install Windows vista Service pack 1 (K936330), need 25 character codes

    Try to install Windows vista Service pack 1 (K936330), need 25 character code.

    You don't need the code to install a Service Pack - what's your real problem?

    Your system shows a non-genuine notice?

    To analyze and solve problems for Activation and Validation, we need to see a full copy of the report produced by the MGADiag (download and save to the desktop - http://go.microsoft.com/fwlink/?linkid=52012 ) tool
    Once saved, run the tool.
    Click on the button continue, which will produce the report.
    To copy the report in your response, click the button copy in the tool (ignore the error at this stage), and then paste (using r-click and paste or Ctrl + V) in your response.
    -* in your own thread *, please

    Please also state the Version and edition of Windows cited on your COA sticker (if you have one) on the case with your machine, but do NOT quote the key on the sticker!
     http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  • 64 c the error code when you try to install windows update kb2505591

    Why do I 64 c error code when you try to install windows update kb2505591

    Hello

    The kb2505591 is for the download of Bing Bar 7.0.

    You can try the methods provided below to solve the problem and then try to download the update for Windows.

    Method 1:

    I suggest to reset the Windows Update components and check if that helps resolve the issue.

    http://support.Microsoft.com/kb/971058

     

    Method 2:

    Follow the instructions in the link below to rename software c:\windows\system32\catroot and distribution records and try to install the service pack.

    You cannot install some programs or updates

    http://support.Microsoft.com/kb/822798

    If the methods above do not help then try to download Big bar 7.0 maually starting from the link provided below and check if the problem persists.

    http://support.Microsoft.com/kb/2505591

  • Hard drive does not appear when you try to install Windows 7 ultimate x 64

    Hello

    I have a problem, try to install Windows 7 x 64 on a Compaq CQ56

    When I get to choose the drive where I want to toion install windows noting appears it seems that I don't have the drivers for my HARD DISK

    can someone give me the right drivers for use in installing windows 7 for this model, or information about how to install windows 7 x 64 on this computer

    My Info to the computer:

    Name of the product CQ56-130EP product number XH199EA microprocessor 2.1 GHz AMD Athlon II Dual-Core Processor P320 microprocessor Cache L2 1 MB of memory cache 3 GB memory DDR3 (1 x 1024 MB + 1 x 2048 MB) Memory Max supports up to 8 GB memory DDR3 graphics ATI Mobility Radeon HD 4250 Graphics video memory video card up to 1405 MB graphics memory total available screen 39.6 cm (15.6 ") diagonal high definition HP BrightView display led) 1366 x 768) hard drive 320 GB SATA Hard Disk Drive 5400 RPM Media Player SATA optical drive: LightScribe SuperMulti DVD±R/RW with Double Layer Support network card 10/100BASE-T Ethernet LAN connectivity, wireless 802.11 b/g/n sound generic, stereo keyboard full size keyboard integrated with action pointing device Touchpad keys and quick launch buttons with we / Off button and 2-way Scroll cushion support External Ports

    Hello

    I formatted the drive with Acronis True Image Home, then he showed in the Windows installation

    Thanks for your help.

  • Try to install Windows 7 but the grip to install in the "collection of information".

    suspended in the "collection of information".

    Try to install Windows 7, suspended in the "collection of information".  Any suggestions?

    How long you wait to determine that she is hooked on collecting the information?

    You try to upgrade or clean installation?

    You disconnect all devices non-essential connected to the computer before attempting the installation?

    If you are upgrading from a previous version of Windows:

    1 disable any security software before attempting to upgrade
    2. make sure that your computer is updated (devices and applications)
    3. disconnect all external devices before installing.
    4. check your hard disk for errors:
    Click Start
    Type: CMD, according to the results, right-click CMD
    Click on "Run as Administrator"
    At the command prompt, type: chkdsk /f /r
    When you restart your system, your computer will be scanned for errors and will try to correct them.

    1. click on start, type msconfig in the search box and press ENTER.
    User account control permission
    If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
    2. in the general tab, click Selective startup.
    3. under Selective startup, clear the check box load startup items.
    4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
    5. click on OK.
    6. When you are prompted, click on restart.
    7. after the computer starts, check if the problem is resolved.

    Also run the Windows 7 Upgrade Advisor:
    http://www.Microsoft.com/Windows/Windows-7/Upgrade-Advisor.aspx

  • My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during installation

    My new build computer runs like a piece of cake on fedora, but when I try to install windows 7 it restarts during Setup after loading files? Configuration
    ZOTAC GE Force GTX 670
    PSU Antec 900 W
    Intel core i7 - 3770 k
    Card Asus P8 Z77 - Mother V PRO
    WD 2 TB hard drive

    If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  • I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

    I installed a new hard drive for my dell Inspiron 1525 and try to install windows 7. He asks me to install the driver. How to do it

    Using the Dell recovery disks to reinstall?

    The origonal drive failed?

    If you are using a real MS win dvd during the first part of the installation it can not find a drive or ask a driver, then the driver is obtained from Dell, specific to your model, its likely the driver sata, you need to download to say a USB and then point to this file when the installation application the third-party driver.

Maybe you are looking for