update to Server 2008 is stuck at 'Configuring updates 3%.... " »

Similar Questions

• Problem with Server 2008 window after delete "pending.xml" not a good way.

  Hello

  Actually, I was stuck at stage 3 of 3 window 2008 Server Update. I solved this problem by performed only "del c:\windows\winsxs\pending.xml" on the installation disc - invite to dot. After that, I could access my desktop. But there was another problem occur as shown below:

  (1) I could update the file in the window, but I could not update the last update file that is the window Server 2008 previously stuck.

  (2) network icon shows no internet connection, but I have always seen my ip address in internet explore and remote computer could still connected, but displays error cannot access the office. I double click on the network icon, it shows "Unknow" "the dependency service or group could start. I can't not verification of diagnosis. It shows me start "policy and network access Service" in the Services. I try but pop up error message.

  (3) in the Server Manager, role summary shows Red Cross serving files, network and Access Services, Terminal Server Services strategy and the Web

  Server (IIS).

  (4) antivirus software cannot start properly.

  You have an idea to solve my problem?

  Thank you very much and best regards, Teresa.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• Updates Windows Server 2012 faulty - stuck at 67%

  For the past 3 months my server 2012 no R2 VM was the fault of updates. If this is an update to Windows Server 2012, it fails. It is not related to an update of the server 2012 specific windows, but they all fail. I can run updates updates/Silverlight IE without any problem.  After that I installed them and restart it gets stuck on configures updates 67% then eventually restarts and returns and sometimes it does not many times. This is getting extremely frustrating.   -Thanks for any help

  Please post your query to:

  https://social.technet.Microsoft.com/forums/

  Server issues are better addressed there.

• Windows update error. Code 80244018 on Windows server 2008 64 bit

  When I perform a windows update on my windows server 2008 64-bit, I get this error message:
  Code 80244018 Windows Update encountered an unknown error.
  I use as antivirus Symantec Endpoint Protection version 11.0.

  In my control panel configuration, automatic updates is set to automatic and Background Intelligent Transfer Service is also set to automatic.

  Hello

  I suggest you send your query on the link below:

  http://social.technet.Microsoft.com/forums/en-us/IECs/threads

• Error in SQL Server 2008 R2 update: WindowsUpdate_84b20001

  I get this error message when you try to update SQL Server 2008 R2 update error: WindowsUpdate_84b20001.

  I have a suggestion for the knowledge base to rename the file %systemroot%\System32\Spupdsvc.exe in Spupdsvc.old, but the file does not exist in the first place. It's actually a fix for the problem 84b2000B, and my problem is code b 84, 20001.

  I also tried with FixIt but it meets av problem and cannot continue. No message about it though.

  When searching for the community I have fnd no obvious solution. I had this problem since September 2011 and the daily update fails every day since then. I have about 2 GB of free space (total Congress GB 139) on the HDD, 4 GB of RAM and is running Windows Vista on a laptop HP Compaq 6715 b (old since I bought this as a new computer at my retailer in December 2007). I use AVAST anivirus but he seems to have nothing to do with the problem of to. I also have drivers and firmware for hardware updated latest version a week ago but nothing seems to help.

  I also have problem installing SQL server Express. And cannot install Visual Studio 2010 Pro SP1 probably as a couse direct of this installation failure.

  Suggestions how proceed in diagnosing this problem help no doubt at some level. I'm completely stuck now.

  If you post in the forums of Microsoft SQL Server, you will get most help for this issue.  Thank you.

  http://social.technet.Microsoft.com/forums/en-us/sqlsetupandupgrade/threads

• Server 2008 R2 GPO do not update Windows 7 security policy - Audit policy

  I have an old Server 2008 R2 Standard (SP-1) 64 and 25 workstations Windows 7 64,.

  On the server I have Group Policy Management, default domain policy, Computer Configuration, Windows configuration, security, local policies, Audit policy, all parameters together for the pass/fail (account, directory, logon, object, Prov., etc, etc, etc.) cela fine checks at the server level.  GPMC looks good, resulting strategy game is good with the default domain policy in all areas.

  25 workstations become the settings of the GPO server for story/password to the password policy, etc. and all other settings.

  25 workstations do not receive local Audit policy success/failure as the server, all the "Auditing No." and not able to allow to manually set or get updates from the Server GPO, not the gpupdate/force.

  When done desktop computers get their information to audit of Server 2008 GPO, I thought that this came from default DC GPO for the audit

  Thank you

  B.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Server 2008 Clustering in ESX 3.5 Update 3

  I see it in the release notes for update 3 that Server 2008 clustering is not yet supported. We have a development environment that we would like to build clusters 2008 for test purposes (no production). In addition, our dev farm is boot-from-SAN. Did somebody get 2008 clustering to work?

  As an alternative, VMware Server would work for this? We try to avoid the cost of physical boxes and storage shared for clustering testing 2008. Yet once, it will not be a production workload. Thanks in advance.

  They're waiting for you, Gordon... in the test Chamber...

  I got a 64 bit 2008 Enterprise cluster successfully on 3 update configured, with iSCSI volumes connected Microsoft like shared disk (only players to start the virtual machines are on VMFS, also on a SAN-based data store). Have had no issues at all, even when rapid vMotioning of VMs cluster node (which are given 8 GB of RAM a piece) during periods of IO reasonably heavy.

  Hope that helps! Please, help me by marking my response as "useful" or "correct", if you feel it is useful!

  -Amit

• WebLogic STUCK Thread on query on MS SQL Server 2008

  Hi all
  
  I am the thread stuck following during an update of database on MS SQL Server 2008. Works fine on Oracle.
  Tried latest MS SQL Drivers and also tried datadirect drivers... any suggestions are welcome.
  
  
  at java.net.SocketInputStream.socketRead0 (Native Method)
  at java.net.SocketInputStream.read(SocketInputStream.java:129)
  at com.microsoft.sqlserver.jdbc.TDSChannel.read(IOBuffer.java:1579)
  at com.microsoft.sqlserver.jdbc.TDSReader.readPacket(IOBuffer.java:3730)
  -locked (a com.microsoft.sqlserver.jdbc.TDSReader) < 0x03a500e0 >
  at com.microsoft.sqlserver.jdbc.TDSCommand.startResponse(IOBuffer.java:5321)
  at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.doExecutePreparedStatement(SQLServerPreparedStatement.java:388)
  to com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement$ PrepStmtExecCmd.doExecute (SQLServerPreparedStatement.java:340)
  at com.microsoft.sqlserver.jdbc.TDSCommand.execute(IOBuffer.java:4874)
  at com.microsoft.sqlserver.jdbc.SQLServerConnection.executeCommand(SQLServerConnection.java:1400)
  -locked < 0x087ab808 > (a java.lang.Object)
  at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeCommand(SQLServerStatement.java:179)
  at com.microsoft.sqlserver.jdbc.SQLServerStatement.executeStatement(SQLServerStatement.java:154)
  at com.microsoft.sqlserver.jdbc.SQLServerPreparedStatement.executeQuery(SQLServerPreparedStatement.java:283)
  
  Thank you
  Faisal

  There used to be a way to set the isolation level by default for connections from the pool, but I do not see in the console...
  Your application can set it when he gets the connection, but you know what you are doing? Do you know
  Why you blocked, and who could hold the locks you want for as long?

  I found it... Add to the list of properties of the driver of the pool:

  desiredtxisolevel = TRANSACTION_READ_UNCOMMITTED

  or TRANSACTION_READ_COMMITTED, TRANSACTION_REPEATABLE_READ,
  TRANSACTION_SERIALIZABLE, etc.

• Portege R600 - cannot update the BIOS using Win server 2008

  Hi all.

  Pls help...

  I tried to update my bios to the new version, but I can't.

  I just downloaded bios update of the toshiba site for portage r600 for my model number (bios update 1.80 - winner), I unzip the zip, run the exe, but error popup came:

  Package for the TOSHIBA BIOS ver.3.2.9
  Unsupported product type is installed.
  Package BIOS BIOS Version: Ver.1.80
  Current BIOS version: Ver.1.40

  So my question is what am I doing wrong? I'm trying to update my bios from windows.

  is my version of windows: windows server 2008 Enterprise Edition x 64 SP1 (don't ask why, I just have to run Server 2008)

  Thank you.

  Hello

  Your OS windows seems not to be the Windows which was preinstalled on your Portege
  You cannot update the BIOS by using the windows server 2008 Enterprise Edition x 64

  You will need to put the system which has been pre-installed by Toshiba

  Good bye

• Cannot configure GPIB in Windows Server 2008

  I installed the version 2.8 IEEE488 driver on a Windows Server 2008 computer.  I have successfully added a GPIB-ENET under Measurmeent and Automation Explorer interface; However, he does allow me to change the configuration of the interface.  I get the message "the GPIB Interface Properties cannot be changed by an administrator" in the status bar.  I am the administrator for this computer group.  Does anyone have any suggestions?  Is there a different usergroup that I need her?  File permissions need to be addressed?  Is there another configuration setting that I need to do?

  I solved the problem.  Run as administrator.  Not enough coffee this morning.

• D20 problem of configuration of Windows Server 2008 R2 / 1 x SATA HD / 4 x SATA SSD

  Hi all

  I have a Mod D20. 4155 and want to use next to it is by default SATA HDD SATA SSD four disks of virtual machines. Windows Server 2008 R2 will be the OS with the use of its Hyper-V features.

  I have Aproblem with detection of drives in the configuration of the operating system. All 5 disks are visible in the Marvell controller BIOS setup. It is possible to configure a RAID on the SSD, etc, but I don't "see" any disk in the configuration of the operating system. I tried to load additional drivers in the part of the Setup utility GUI, but it did not work. I tried with the driver Marcell SAS and Intel Matrix driver, both located at http://www-307.ibm.com/pc/support/site.wss/migr-72280.html.

  Suggestions for the BIOS of the PC / BIOS Marvell / OS installation configurations?

  Best regards, Chrischmi

  Hi all

  I found the solution myself. After detection, the default drive is a SATA drive (and), I got the idea to test it on the Intel SATA controller. It was possible to install the spirit of the machine the disks attached to the Intel controller. After installation, I went to Device Manager and installed the driver of Lenovo Marvell, rekindled the Marvell controller disk and started the. Successfully. Yes!

  On my way to the solution, I had another problem: in the setup of Windows GUI part, I got an error of 0 x 80300001 with Lenovo's Intel SATA driver. It was not possible to install windows Server on the SATA drive with reason0x80300001. very helpful post, Microsoft! (-) I decided to use the default Microsoft for the Intel SATA controller driver after a reboot. Installer executed well, but ended with an error 0 x 80070017 and problems of copy of (unknown) files. The solution (found after a few hours...) was to burn a new installation of Windows Server DVD. I don't want to talk about it anymore...

  -Christoph

• Server 2008 R2 installation will not configure on DV7 series laptop

  I installed the Server 2008 R2 on a laptop DV7-7012nr. I upgraded the memory up to 16 GB. I deleted all the partitions, and then divide the hard drive into 2 partitions. Partition 1 is 7 442 Go Windows, Partition 2 is 256 GB server.

  When I install, windows server 2008, in dual boot, it will not complete the configuration for the material. This leaves me the choice either reinstall Windows server 2008 and to come back to the same error or return to windows 7.

  How can I get a dual boot for a full installation of Windows server 2008 R2 Enterprise Edition or Standard on my DV7-7012nr laptop?

  After spending 5 days with installing Server 2008 R2 64-bit on this laptop, I contacted the HP Support. Technical support HP and after 4 hours and 7 different technicians, I was informed that they can not help me with the installation of Server 2008 on this laptop. I know it's possible, and I installed Server 08 several times that I can remember. I'll have to this laptop with the conclusion that although HP says that it will work, it will not return.

  Summary; Windows Server 2008 R2 64-bit Standard or enterprise will not be installed on the HP Pavilion dv7-7012nr laptop.

• Cannot update/modify files - Server 2008 r2 for 2012 r2 upgrade

  I have a server that has been upgraded to Windows Server 2008 r2 to Windows Server 2012 r2. Before the upgrade, I could change the files in the directory c:\test. After the upgrade, I am unable to update when you are connected to the local computer. I can refresh the files from another machine via a UNC path, however. When I try to update files via the local computer, she wants me "save under" and says "Access denied" when I try to replace the file. I can rename it and save it in the directory, but not to replace the current file. When I check the effective permissions on the file, it says "Total control" and I am an administrator on the machine. However, if I add my account to the folder with the "total control" I can edit and save the file. So, I have a workaround in place, but I want to fix the real problem.

  Troubleshooting steps:

  • Turn off UAC
  • Attrib on folder and file settings
  • Removed all permissions and added to the folder
  • Copy/paste the contents of the folder new folder
  • I can create a new folder and the file and modify the content, if they are new
  • gpupdate/force
  • restarted several times

  Thank you

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Cannot install updates on Server 2008 R2. Reporting EventViewer 2147500034 error

  I have a problem with Windows Server 2008 R2, where I am unable to install updates.  I already ran the Microsoft Fixit and he relate not apparently something wrong that either it reports an error.

  In trying to apply updates to a manual download, I get the following in the Event Viewer error.

  Windows update might not be not installed due to the 2147500034 error "no such interface supported" (command line: "" C:\Windows\system32\wusa.exe""C:\...\desktop\Windows6.1-KB2913751-x64.msu"")

  This happens with any update downloaded that I try to apply.

  Any help would be greatly appreciated.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Services Terminal Server Windows Server 2008 R2 improved Configuration Error IE

  We have a Windows Server 2008 R2 with enhanced IE configuration set to off for all users on the Server Terminal Server services only.  The sessions of the Terminal services Server running Windows XP.  Whenever an end user clicks on Microsoft Outlook in a session, it executes an error from IE Configuration improved mentioning that the site needs to be added to the zone of confidence (subject: internet.)  Unfortunately, I do not know what url he speaks out.  I would like to know what precisely needs to be disabled in order to avoid the mistake of filling.  We have already defined group policy to disable this, but apparently not take after or gpupdate/force runs a logoff of connection occurred.  Of alternatives that anyone can give would be great.  Thank you very much.

  Nick

  This issue is beyond the scope of this site which is for the consumer to related issues.
  To ensure that you get a proper answer, ask either on the Technet site, if it is a type of Pro problem, or MSDN if it's related to the developer
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum