Try to open the .pub file - get error not valid Win 32 application

Similar Questions

• IAM cannot open PNG file in adobe PS CC 2014 and when I try to open the PNG file, message: could not complete your request because it is not just some kind of document

  IAM cannot open PNG file in adobe PS CC 2014 and when I try to open the PNG file, message: could not complete your request because it is not just some kind of document

  try to make a copy of the file and change the suffix for .jpg and see if it opens then.

• Try to restore the data file, get error 'you don't have permission to save in this location"in Vista

  I am new to Windows Vista, but relatively competent in older versions. I installed the software on my new desktop computer. I am the only user on this computer and I have administrative rights. I installed the software in the Program Files directory. In the software, there is a folder for the working data file. I now try to 'restore' my data on this new computer file so that I can start working. I get an error message that says "you don't have permission to save in this location. Contact an administrator. "I have considered similar questions on this site and followed the advice to take possession of the file without success. I also created a new folder on the D drive, thinking maybe Vista I just wanted to keep C clean, but it gives me the same message. I can't save to the folder I created. Any advice?

  Program Files is a protected directory. If possible you create the working folder for the data in your user account instead. Is it possible in the options of the program the program in a directory of your user account? Or, if you think that any other user you may need to use this program, you could create the directory Public. MS - MVP - Elephant Boy computers - don't panic!

• Cannot install IMVU application, get error not a Win 32 application

  I can't install the IMVU app it reaches the end of the installation and is about to be loaded and an error comes up saying does not load a win 32 application

  Probably, you should contact IMVU support and/or poster on the forums of IMVU.

  You want to offer (even if you post more here as well - that you might as well since you have this conversation classes to cover all bases) the exact error that you receive (verbatim).  The more detailed your information, more likely it is someone can help you.

  For example - at the present time, (here) we assume that you have Windows Vista - but you do not know specific version of Windows Vista or if you are running the 32-bit version or 64-bit?  All of this information could be useful to both places.  Would also be good to know if you have no service pack, service pack 1 or service pack 2 is installed on Windows Vista and which antivirus application you use.

• I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation.

  I am trying to install some Elements 9 on a new computer. I downloaded the files, .7z, .exe and run the installer. When I try to open the items, I get an error message "please the product using Setup.exe in the root folder of installation/uninstallation. I did it

  Hello

  Please see error: 'Please install Adobe installation using Setup.exe' when you install non-English versions of Adobe Creative Suite 3

  Hope that helps!

  Kind regards

  Sheena

• I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and I w

  I just downloaded and installed the Lightroom update version (5.7).  When I now try to open the program I get an error message stating "the application could not start properly (0xc00007b).  It happened the last time I upgraded and sent me a few files that has corrected the problem.  Can help you.  With our thanks.  John

  Try this: error "Unable to start properly - 0Xc00007b"

• When I try to download the updates I get error Code 800 B 010 & error Code 66

  Original title: I Keep Getting error 800B 010
  -----
  
  When I try to download the Dates, I get error Code 800 B 010 & error Code 66

  Hey, Joe Zerilli,

  1. you remember to make changes to the computer before this problem?

  Step 1:

  You can check the following link and try to run the system update readiness tool and check:

  Windows Update error 800b0100

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-800B0100

  Step 2:

  You can also read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Hope this information is useful.

• When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

  When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

  Good luck to the project is corrupted.

  Be happy, you have an auto save, even if you've lost some work.

• I CS6 master collection when I try to open the first, I get a window subscription renew telling me my CC trial expired - I have purchased and registered CS6, how is that I can't open it?

  I CS6 master collection when I try to open the first, I get a window subscription renew telling me my CC trial expired - I have purchased and registered CS6, how is that I can't open it?

  Looks like you may have installed creative cloud and run CS6 from there. Please see this link:

  'Renew your membership' window appears when you launch a creative cloud application
  Using creative cloud | 'Renew your membership' window appears when you launch a creative cloud application

  If you completed a trial and want more creative cloud, you must uninstall it, run the cleanup tool, and then reinstall your CS6.

  These links may help:

  Using creative cloud | Download, install, update or uninstall applications

  Use the CC cleaning tool

  Guinot

• Cannot delete a file in windows 7. Indicates the specified file name is not valid or too long.

  Hello everyone, I'm pretty stuck here. I can't delete a file in windows 7 or any other do with it besides. Says "the specified file name is not valid or too long. It has a funny name [~ t] and no extension. The file type, say "file". The properties are all screwed looking with a mistake on the Security tab, a size of 0 k, is a Windows (c) \Windows\en-US.The other files in this folder appear normal. The computer seems to work very well without any obvious problems. The only problem is my anti-virus reports with a kind of syntax for the file error and indicates it cannot parse this file. I do not. I can't do a thing with it either. Cannot open, rename, move, delete, change passwords, properties, permissions, nothing. It may be necessary for a good part with 0kb. According to me, I want to just delete the thing. Please, anyone? Thanks in advance.

  Hey bud, I figured out how fix it earlier. I am so happy. I came to remember a command called chkdsk which worked very well for various issues, that I had since the construction of my old 2000 Professional machine. I think that one was my first NTFS system. I always liked how well he error correction. Seemed a lot better than the old scandisk. Low and behold, I tried and star ANISE, it is went through it, found this file almost from the beginning of the analysis and a few lines later, he said has been removed. Says something about the file being orphaned some time ago. It was a very bad child, that I tell you. I ran it in safe mode command prompt. I guess he would have done the same thing in the normal windows well, but I happened to be in safemode, when it came to me. I used the switch /f with her. Since the C:\ command prompt or any drive letter your operating system is selected, type CHKDSK/F if I remember although the f was to have it automatically CORRECT errors. I hope this info helps others with their file or disk problems. It seems that many people say they get mistakes and cannot delete various files here in these forums. Thanks Sandeep for answering me and try to help. It does not matter whether or not it was the fix, it takes time to post and your helping people learn to be it. The only thing that remains unanswered for me is actually the thing of the answer. I mean I can't say someone at - it really answered my question and do not count me? Maybe I should mark so that people will bother to read it and get the fix. HMMMM... I come back here some time later and see whats up.  SeeYou, EWOO

• Update Firefox, now I get an error when you try to open the .mkv files, but not other video files

  I created an html page of cinema at home with links to movies on my hard drive. I have two types of links or href = 'file:///C:/Media/movies/Looney Tunes/MainMovie/Vol 1 Disc 3/VIDEO_TS/VIDEO_TS. IFO' for normal DVD or href = "file:///C:/Media/movies/Blu-ray/Lorax/mkv/THE_LORAX/THE_LORAX.Title800.mkv" for blu - ray. Both have worked fine (click on the link and the movie starts to play with Media Player Home Cinema) for a few years until what I recently upgraded to firefox. The .ifo files still open as usual, but now blu - ray links take me to a gray page that says "Video cannot be read because the daughter is corrupt" with a large "X" over it. If I open the html page in Internet Explorer and click on the link, it works very well (blu - ray opens by using Media Player Home Cinema). Also, if I directly open the .mkv files, they play very well (open using MPHC). Thanks for any help!

  Change your links to include the attribute type with the value of video/x-matroska . Example:

  <a type="video/x-matroska" href="file:///C:/My%20Videos/Cooking/Making%20Gingerbread.mkv">How to make gingerbread</a>

  • https://developer.Mozilla.org/en-us/docs/HTML/element/a

  I also used to get the same behavior with files from web sites, when I had the extension of InlineDisposition installed.

• When opening a zip file, get error message file is not in zip format or file is corrupted

  I downloaded a zip file of the interenet and when I try to open an error message keeps coming up that it is not th file in zip format or the file is corrupted, I use zip easy to try to open the file.

  Hello

  Its probably a bad zip as it says, corrupt. Or it could be a file format that is not ZIP, was
  renamed with the ZIP extension. Try to use 7 - Zip to open the file. Try it on another computer.

  7-zip - free
  http://www.7-zip.org/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• When you try to install the Vista SP1, getting error 800F0900 Code

  I'm unable to install service pack 1 for Windows Vista. It will go almost to the end of the installation, and then the error pops up.

  I installed system update readiness tool.

  I have rebooted background intel transfer serv, cryptograph serv and windows update.

  I tried going through windows update, but would not yet spent 0% of the dl. So I tried a few Fixer windows update and still the same thing.

  I've done the cmd as administrator and did the sfc/scannow, and he says there are errors that it is impossible to repair.

  I tried to make the findstr/c: "[SR]" windir\logs\cbs\cbs.log>sfcdetails.txt and retrieve a FINDSTR: cannot open windir\log\cbs\cbs.log.

  Then I tried c:\logs\cbs\cbs.log Notepad and get back that the system can't find the path specified.

  My laptop came with Vista on it so unfortunately I have no disk to work with.

  I have no answer why you cannot install SP1.

  My answer is on your trying to open the CBS.
  You have not correctly the command line.
  It's... notebook C:\windows\logs\cbs\cbs.log
  Copy and paste the command line instead of typing.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. When I try to print the PRN file an error

  Print my pdf files is no longer. After pressing PRINT the 'Print to File' window pops up and I have to press SAVE under to go to the next step. Once the pdf file is saved it is therefore more a pdf but a PRN file. An error message appears when I try to print the PRN file. I need to be able to print my original pdf files. Please notify.

  Looks like you somehow accidentally active the option print to file in the Advanced Options print dialogue. Uncheck that and this problem should go away.

  -Dov

• Elements first 13 on Mac. try to use the motion tracking. get error "the media file seems to have a bad entry in the catalog. Please rename it for use. »

  Someone at - it solved this problem?  What is the 'catalog '.  I've been an import (1080/60 p) and get started.  Everything else seems to work very well.

  Steve, I opened the "Organizer" is gone to the root AVCHD (marked PRIVATE for some reason any).  I selected add media from the root directory.  It has imported media.  I then click with the right button on the desired video file and opened his first 13 items.  Loaded automatically moving.  I tried the tracking motion AND IT WORKED!  Thanks for your suggestion because it made me think that maybe there is some hidden files or that the Organizer could load the file moving PE13 how you want.  He did and it works now.  I will be certainly all future media in this way. Thank you, Don