Try to recognize the digitizer PXI-5922
I've only been using LabVIEW for about a day now, so everything is more or less still new for me. I worked for most of the startup guide to become familiar with the program. Right now I am so he can recognize a NOR-DAQmx device. This device has been used before (but not by me), so I'm sure that everything must be properly installed. One thing I noticed, is that when I turn on the chassis, the LEDs on the digitizer do not turn with it. I came across this while trying to find possible solutions, http://www.ni.com/pdf/manuals/371133m.pdf in the troubleshooting guide, there is a section for this problem. It points me to the measurement and Automation Explorer to try to reset and self-test of the device. The problem is, once I get to it I'm greeted by this
Maybe I'm just on a step since I've only used this program and material for the day, but could someone put it in an entry. Thank you.
I got actually work on my dissertation for my last answer. Thanks if.
Tags: NI Software
Similar Questions
-
How we control the gain of the digitizer PXI-5102 factor?
Dear Sir, I have a question on the gain settings in the wfmInfo structure that is returned when you use fetch or read functions. Dose it be determined by the digitizer (internal) automatically when you set the attenuation range and vertical probe? How he determined? Thank you very much for your help.
Double post. See the answer here.
-
Can not use the card PXI controlling SCXI for something else
Hi all
We have a hybrid chassis of 1052 with a PXI-6221 (control of the special SCXI version) into the slot of the 8th and, while it allows us to access map of the SCXI-1540 module without problem, if I try to add the NI PXI-6221 to the list of data acquisition cards to read the definition of system files or I make reference to any channel in a task of analog input (custom device) it is telling me that the resource is reserved. When I list the card in the system definition file, it gives the error message even if I turn off the single-point support timed by the hardware.
I went back to the documentation for the Web site and I couldn't find a place where it says you need a card PXI for controlling SCXI cards but that the PXI card controls became useless.
I'm doing something wrong?
Thank you.
Dear Claudio_G,
That should really be a limitation in VS2011 because there are future news added since VS2011.
And the reason why it works in the custom device could be the one custom unit as PXI6221 and SCXI1540 are separated internally in which the task and VS that it works in the same task.
Then when it works properly in the custom device I recommend to use this way or other wise update to VS2013.
Kind regards
Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. |
-
Since the new update Illustrator does not recognize the graphics card to my SURFACE PRO 2 and the digitizer stylus does not work properly.
Any ideas out there?
I know the pro 2 surface is not the real model, but at least it should work fine.arwinq,
You can see the system requirements, including the maps here.
https://helpx.Adobe.com/Illustrator/system-requirements.html
but I fear that you may be taken in this GPU issue described by butz in post #13 here:
https://forums.Adobe.com/message/7773402#7773402
You can try to switch between GPU and CPU by pressing Ctrl / Cmd + E, or you try disabling GPU performance by clicking on the icon of the rocket in the bar of the App, or on the top of the menu bar, deselect the box Performance GPU. You may also uncheck performance GPU in your preferences.
-
Hello.
When I try to change the settings of iTunes store password does not work: System doent recognize the apple ID account password
Sign out and then sign in again the apple between the device and what not ID recognize the password very well, but when Im going to change all password parameters, system ask me the password again, I write and ask again... n times.
I tested in different devices, iphone and ipad, with two different accounts and beta of ios 9.2 and 9.2.1. Still the same error.
The problem is that when I try to download a free app from app store ask me the password and does not work so I can't download any new script.
Thanks for your help.
Best regards.
Hello bdepaco,
Thank you for using communities of Apple Support.
I see that you have any questions, change your password ID Apple via iTunes. Have you tried to change your Apple ID account page? Take a look at the following article for the steps:
Once you have changed your Apple ID password, it presents a few additional measures to be taken.
What to do when you have changed your Apple ID email address or password
Best regards.
-
How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?
Hung Nguyen
Hung Nguyen,
The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.
See you soon,.
-
Try to install the software on target RT PXI 1082
Hello
I try to run a chassis PXI-1082 (recovered with factory settings), but I have some problems when I try to install softawre through NOR-MAX on it from another PC connected with the ethernet cable.
First of all, I saw a PXI chassis BIOS problem when I started PXI chassis in RT mode: "ph_exec.exe is missing". PXI chassis started in SafeMode to RT.
Secondly, I detected correctly chassis with MAX on PC with the correct IP address but when I tried to install the software on it, an error message resembles what occurred: ' no more space in the hard disk or input output error occurred. " I think that there is a consequence to the previous "ph_exec.exe is missing" message
Could you please help me for this disorder?
Thank you.
ARM
Hi Alexis,.
Thanks for your reply. I am not able to open your link, but I found a solution on site OR: «Dual-boot Windows and Labview RT on a PXI controller»
My problem is that my hard drive on the PXI controller is configured in NTFS mode and no partition in FAT32 mode existed. The reason why my PC says "no more space available" because it seemed to drive FAT32 partition. I am surprised that NEITHER do not included the partition FAT32 for RT. I've probably missed something. In any case, it seems to work fine now with disc FAT32 partition.
I install the software on my lens PXI know.
Thank you
BR
Vincent.
-
Original title: hardware device
I'm trying to get my iPod and ipad to communicate via bluetooth. I finally got the computer to recognize the ipad, but when I try to do something, told me in troubleshooting that the device didn't bluetooth "t have a driver. I tried to download without success. I'm not what you call computer savy. could use a little help.
Hi Annemschipper,
You can check the following items and check if Windows is able to recognize Bluetooth devices.
The problems with Bluetooth devices
Change settings for a Bluetooth compatible device
You can also visit the Apple support article and see if it helps.
Device not recognized in iTunes for Windows
Bluetooth and Wi - Fi settings grayed out or dim
Hope this information is useful.
-
I try to install vista on a computer running xp. XP does not even recognize the vista disc is in the drive. XP recognizes any other drive that I use and the vista drive is recognized on other computers, that I put it in it's not a prob with the disk or cd rom
The Vista installation disc is a DVD. Apparently, you don't have a DVD player. You would need to purchase/install a DVD-ROM or DVD - RW to install Vista. Are you sure that your hardware supports Vista before doing this?
http://www.Microsoft.com/Windows/Windows-Vista/get/system-requirements.aspx
Even if a minimum of 1 GB, the requirements in the real world Vista requires a minimum of 2 GB of RAM to run without problem. You will also need Vista drivers for all your hardware.http://www.Microsoft.com/Windows/Windows-Vista/get/Upgrade-Advisor.aspx MS - MVP - Elephant Boy computers - don't panic!
-
Try to burn a CD. The system will not recognize the blank disc or let me burn__
Try to burn a CD. The system will not recognize the blank disc or let me burn... says there is no disc inserted
Hello
Have you tried to close all programs and then insert the disc? Restart the 1st and then try it.
If no joy:
Please make all below even if you have done some before as it is often the set of operations which solves
the question.Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
This will refresh the default driver stack. Even if the reader does not appear to continue below.
Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitThe CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.Hope these helps.
Rob - bicycle - Mark Twain said it is good.
-
try to install the storage pool. Windows 8 does not recognize disks external wd 2
I go to the storage space and try to create the pool. Windows 8 does not recognize my 2 external drives of 2 TB wd. I can load files and cannot get the readers in the Explorer of files, but could not create the storage pool.
The following site can help you create a storage pool:
http://www.bleepingcomputer.com/tutorials/how-to-configure-storage-spaces-Windows-8/
-
I bought the XT-10 Fugifilm. On the Adobe website, it indicates that Lightroom 6.1 and above is compatible with the file format of RAF. However, even after the update, LR won't recognize the files when I try to import them.
If someone has experienced this problem and found a solution?
[Ask in the correct forum allows... Left non-technical Forum Lounge for forum specific program... MOD]
The current version is 6.6.1
What's new in Lightroom CC 2015.6.1 and Lightroom 6.6.1? Lightroom Queen
Try to update to 6.6.1 and see if you still have the same problem.
-
Hey,.
I moved to Israel.
I try to buy the product from the company, but it did not recognize my information that U.S. online...
But I change in Israel?
Roy, please Contact Customer Care. You can also check: change the country associated with your Adobe ID.
I hope this helps.
-
I have Photoshop CS5.1 (bought in 2011). The photoshop Camera Raw plugin is not recognize the format of my new Nikon D610. I've updated the version of my Camera Raw plugin and still get this message when you try to open pictures in photoshop. Help, please.
This link shows that 8.3 ACR supports the Nikon D610 and 6.7.1 was the final version for CS5.
Camera Raw plugin | Supported devices
If you can switch to CS6 and ACR 8.7.1
or using the DNG converter, convert your Nikon raw files to DNG to open in CS5.
Here is the download link: Adobe - Adobe Camera Raw and DNG Converter: for Macintosh: Adobe DNG Converter 8.7.1
or Windows: Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 8.7.1
And here's a great video tutorial on how to use the converter.
https://www.YouTube.com/watch?v=0bqGovpuihw
Gene
-
Try to download on our FTP site
Muse recognizes the FTP
Then the next screen appears and says...
"Unable to validate the specified domain that is associated with the server FTP. Still? »
FYI, before I update to version 2014 there worked well.
Help please. Thank you. Chuck
OK, I spent about 2 hours on the phone with the support guys Muse and here's what finally worked...
When the second screen, enter ftp, your domain.com NOT www.yourdomain.com
then put the name of next folder as usual.
Why it works that way...? who knows... but it works.
I would like to know how you do them.
Chuck
Maybe you are looking for
-
How to restore from a backup after creating a new Raid 0?
OK so I have time machines of my old hard drive, installed my new and raid 0' ed them. Now I Steelworkers my bootable thumbdtive (who was be Yosemite) to start my el capitan backup and it crashes at the end. After the restoration, the computer stops
-
ActionBar.placement changes create duplicates
I want to create functionality that my app is purchased the action point happen OT InOverflow OnBar however the following code creates doublonnait followed when it changes. Any suggestions how to get around this problem? {ActionItem}Title: qsTr ("Op
-
I had a windows pc 32 bit home premium and Im going to buy a new computer 64 bit with 8 GB of memory work and I want to give my 32-bit w7 to my new pc without an OS for the 64 bit is that possible please send me * address email is removed from the pr
-
Boot Windows XP CD with ThinkPad X 61 problems
Hello. I am trying to install Windows XP on ThinkPad X 61 friend, but for some reason, that it shows only a second hardware analysis message, then it turns off and the HD light is solid. Linux is installed on this machine as well. I use the CD player
-
Regarding the space for the upgrade to ODI 11 g
Hi I want to know how much space is required for the upgrade in ODI and currently have the size of the database of 15 GB and 5 GB free space.