Try to use my BT headset but "detection of service failed.

Similar Questions

• Problem Pairing device: Bluetooth virtual keyboard (VKB) detection of service failed

  Hi, I could use help to determine the cause and the solution to a problem I have. I want to associate this with my Toshiba Tecra M4-S435 keyboard. The laptop has an internal module installed, "Cambridge Silicon Radio, LMP (V: S) 02:0490." I installed the last 5.10.01 (T) BT stack. I have several other paired devices, but this one is the original questions.

  The unit is in the discovery as a keyboard VKB (it supports HID and SPP); I want to use the HID profile. In the authentication dialog, the VKB beeps, who is his warning that a PIN can be typed into the unit, but to hit the enter key, a dialog box informs me that "Detection of Service Failed". I've seen similar problems posted on the manufacturer's website, but I have not seen any resolution.

  Any help is greatly appreciated.

  Hello

  I m not an expert from BT, but if you have several other devices with your laptop coupled, then everything is ok with your Tecra M4 BT stack and the machine.
  It seems that there is a compatibility problem with your external virtual Bluetooth keyboard.

  Either the Toshiba BT stack does not support this VBK and service or the firmware of this device allows a few worries
  However, in case I would recommend contacting manufacturing virtual Bluetooth keyboard for more details.
  Guys should more known on own products as simple Toshiba here users in the forum.

  Good luck

• Satellite Pro T140 + HTC S710 'Detection of service failed.

  Trying to pair my phone with the Toshiba. The HTC S710 is discovered but then I get "Detection of service failed.
  No other information is provided, so I am at a loss - any help much appreciated.

  Using Bluetooth stack for windows by Toshiba V7.00.08 (T)

  Hello

  There is a new battery from BT available for download:

  http://APS2.toshiba-tro.de/Bluetooth/?page=download

  Remove the old battery from BT and after reboot the new first, install the new version of the BT stack.

  Also check BT stack category NEWES:
  http://APS2.toshiba-tro.de/Bluetooth/?page=news

  Hope this helps

• Satellite T110 - Bluetooth detection of service failed

  Hello

  I recently bought a Satellite T110 - 12 p and when I try the PAIR any device with my laptop, I get this message: "Detection of Service failed.

  . Windows 7 Professional 64 bit
  Driver of BT: 7.10.10

  Anyone with the same problem?

  Thank you.
  NS

  Hi nunoabsilva,

  Have you already tried to reinstall the Bluetooth Stack software?
  http://APS2.toshiba-tro.de/Bluetooth/

  Welcome them

• Try to use Windows movie maker but the error message

  Hello

  I try to import a file from a folder on my computer .mpg, but it keeps giving me an error message "interface has too many methods to fire events from. What does that mean?

  "... An interface has too many methods to fire events from... "a word geek, which translates as"... you try to use a MPEG-2 file in Movie Maker, and it won't import or work... ". ».

  The simple answer is to stop to try and convert the file to an AVI or WMV file that will work.

  Read all about it at the link below:
  Movie Maker 2 - Import MPEG files
  http://www.Papajohn.org/
  The left pane of the page expand "source Import movie files ', 'Video', click MPEG.

• try to use my adobe CS6 but CC won't let me.

  Hey guys.

  I try to use my Photoshop, but it sends me to renew your license. I already bought a license cs6 and it is valid. Can't use the CS6 without the need to buy a subscription to the CC?

  Cloud of reading resumes https://forums.adobe.com/thread/2089127 for ideas (see answer #1).

• Wipe the SSD Macbook Air mid-2013 and try to use the internet recovery but fail. Error log: failed to copy the kernel cache

  MacBook Air mid-2013 was clean.

  I try to reinstall Mac OS X Lion mountain 10.8 but after downloading of song made all of a sudden the error appear:

  Cannot copy kernelcache.

  Help, please... How to recover my macbook.

  Thank you

  Restart the computer. Immediately after the chime, press Command + Option + R until a globe appears. The Utility Menu appears in 5 to 20 minutes. Be patient.

  1. Select utility disc in the Menu Utility, then click the continue button.
  2. Loading disk utility, select the drive (entrance Out-bumpy) in the list to one side.
  3. Click the Partition tab in the main window of disk utility. A panel will fall.
  4. Set the GUID partition scheme.
  5. Define the type of Format Mac OS extended (journaled).
  6. Click the apply button, and then wait for the fact button to activate.
  7. Quit disk utility and re-enter the Utility Menu.
  8. Select reinstall OS X and click on the continue button.

• I try to use Windows movie Maker, but my files are in Quicktime format and it is not a recognizable. How can I change of Quicktime in a usable format? I have Vista Ultimate.

  Change a Quicktime movie in a video that can be recognized by Windows Movie Maker. I have Vista Ultimate.

  Change a Quicktime movie in a video that can be recognized by Windows Movie Maker. I have Vista Ultimate.

  ================================
  May be worth a try to convert MOV to WMV...

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you might want to
  Uncheck the box 'all' boxes on the last screen)

  First... after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• I try to use Lovefilm with Silverlight, but does not work. Also how to make a permision in Silverlight for Lovefiulm box

  Siverlight I give permissions. How can I Lovefilm in this box, so I can use it to watch movies like this will not work in Loveilm.

  Hi MayflyQT,

  1. what browser do you use?

  2. What is the exact error message that you receive?

  You can follow this link & check if the problem persists:

  https://www.LOVEFiLM.com/help/dyn_faqs.html?editorial_id=40849

  Hope the helps of information.

• Try to use the ASR backup, but my computer doesn't have a floppy drive - is possible to move that requires a floppy disk for automatic recovery disk?

  With the help of Windows XP Professional
  Do the backup as a prerequisite to installation of SP3

  Transfer your question here instead: http://social.answers.microsoft.com/Forums/en-US/xpperformance/threads

  That being said...

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009.  This support will cost you 59 US$ per incident now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• try to use the windows debugger but "I don't have permission to open the dump file" even if it is a stand-alone computer, and I show up to the administrator.

  I'm trying to analyze a blue error screen associated with some sort of video error

  And if you click rt WinDbg shortcut and run as Admin?

• Hello! I try to upgrade my acer e380, but so far have failed miserably!

  You want to increase the RAM on my mother's system.  I can't find an info on the type or quantity of RAM, the system will take.  The only info I can find is DDR2, but that's all. Everyone knows the answer or a link where I can find the answer?

  Thank you

  Hello..

  This model will support only the maximum memory up to 1 GB

  There are four DIMM slots

  You can install

  256 X 4

  516 X 2

  1 GB

  Each locations supports 1 GB, howvere you will not be able to install 4 GB of memory for this model.

• Satellite A660 - Bluetooth detection of Service failed

  Hello

  Having a strange problem, yesterday my laptop blue projected when I turned on bluetooth... and since then I could not connect my mouse upwards.

  I tried an installation and reinstallation of battery bluetooth toshiba and still nothing.

  whenever I try to connect, I get the error "Service Detection failed"

  any help would be appreciated

  Hello
  It's exactly the same problem I have. I used my BT mouse and received a blue screen
  A few days ago.
  He said: error in tosrfusb.sys when I started my A660 12-t once again, he is unable to connect a BT device
  error "Service Detection failed"
  I tried deleting drivers reinstall drivers for hours again and again
  error "Service Detection failed"
  I use my laptop at work too. When I started to work, everything was fine and my Bt mouse
  works without problem?
  Homepage once again my mouse BT still worked but some time later the same thing,.
  a blue screen and the same problems--> error "Service Detection failed"
  OK the next day at work even once, I tried my BT mouse and again it works without any problem.
  Its crazy...

• "Detection of service failed" stack v6.40.00 (t) for n97

  Hello guys,.

  I have a N97 and I tried to connect it with my bluetooth stack v6.40.00 (t). The service detection failed... then I install an older version of toshiba of the battery, it is work but can not find the bluetooth device. It alwas asking for CD.
  What should I try other ways >? Someone help me please!

  Cherrs,
  GUI

  Use the latest version of Bluetooth stack.
  You can try changing the security mode of the PC:
  (Right click on the tray icon to System Bluetooth-> Options-> Security-> Custom Level-> Mode: level of link applied security)

• Bluetooth - detection of service failed

  Hi, I have a Satellite A660 (PSAW3A-07U00R) with Windows 7 64 bit. I've had my Microsoft Bluetooth Notebook 5000 Mouse connected directly to the computer (the mouse has no dongle) and it worked very well.

  The other day, that my computer froze (about 1 hour) and I finished having to shut down by pressing the power button. When I rebooted the computer, that he got in the log on screen that stops with a blue screen. Blue screen didn't stay long but was told to try the bios update if the problem persists. That kept restarted and continuing to close with a blue screen and restart (at different stages, but especially after I had logged on to windows) about 5 times before I could get on the internet explore and download the updated bios and install it. The computer t hasn't closed since.

  After this saga my Microsoft Bluetooth Notebook 5000 Mouse would not work. I deleted the mouse in the window device connected in the settings Bluetooth Toshiba program. I have that tried to reconnect the mouse, the computer can see the mouse but does not connect to it and pops up with a message "the service Detection failed. I uninstalled all the software of Bluetooth and all the drivers and reinstalled them (Bluetooth Stack for Windows by Toshiba - v7.10.10 (T);) Driver Broadcom wireless LAN - V5.60.48.35_DrvOnly; ConfigFree - 8.0.28). I tried to connect in Express mode and custom mode with Toshibas Bluetooth connection wizard. I also installed Bluetooth Monitor - v4.04 and tried to connect the mouse through the windows "devices and printers" add a new device, but still the same problem.

  The mouse connects to my computer a friend no problem and works fine, so it s not the mouse.

  So my mouse won t connect and I n don't know if it was the update of the bios or windows may be updated itself and pushed all the problems.

  Thanks in advance.

  Maybe the information about the Bluetooth pairing has been altered. Have you ever tried to remove and reinsert the batteries?