Try using Microsoft Deployment Toolkit (MDT), BSOD error

Similar Questions

• Whiel, try installing Microsoft Security Essentials, I get error 0x8007050a

  Original title: 0x8007050a error code

  Come back just my computer to the shop for a virus removal.

  Got it home and hooked up to the internet and tried to update essential security Microsoft.

  It didn't, got an error code of 0x80070a.

  Not good.

  Intend to return to the shop for repairs Monday.

  What is c?

  Why it can't be fixed internet gold?

  Walter C

  P.S. An email to

  Hello

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try the steps in the Microsoft article and check following.

  Troubleshoot common Windows Update, Microsoft Update and Windows Server Update Services installation issues: http://support.microsoft.com/kb/906602

  Method 2:

  Try the steps in the following Microsoft article and check if it works.

  You cannot install some programs or updates:

  http://support.Microsoft.com/kb/822798/

  Method 3:

  Put the computer in a clean boot state, and then try to install it and check.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: once you have completed troubleshooting try the steps to configure Windows to use a Normal startup state.

  If the problem is specific to the updates of Microsoft Security Essentials, then post the same question in the Microsoft Security Essentials forum.

  Microsoft Security Essentials: http://answers.Microsoft.com/en-us/protect

  Hope the information is useful.

• Try using Microsoft Picture It! Publishing in Windows 7. When you try to start a new project or use the Save function under get the message "Windows has stopped working".

  Microsoft Picture It 2001 software installed in Windows 7.  Program will show a project that I recorded in Windows XP that I upgraded to Windows 7, but it wont let me save the project under a different name.  The program does not let me start a blank project.  I get the error message "Picture It! has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. "Windows did not close the program and did not warn me of a solution.

  Microsoft Picture IT is not officially compatible with Windows 7. Microsoft's picture IT was abandoned and has been replaced by Windows Live Photo Gallery. You can download Windows Live Photo Gallery for free and install it on Windows 7, but there only basic editing features.

  Windows Live Photo Gallery:
  http://www.windowslive.com/desktop/Photogallery

  Two editors of the most popular free photo with many features are related to the Sub - between the two programs Paint.NET will be easier to use.

  Paint.NET
  http://www.getpaint.NET

  GIMP
  http://www.GIMP.org/downloads

  You can also use the built-in photo editing Paint program. To open Paint, click the Start button, click programs, accessories principally made, and then click Paint.

• Why Firefox always tell me that it blocks Java Deployment Toolkit after that I did the update?

  On the page Web 'Mozilla - check your Plugins', I was told that the 'Java Deployment Toolkit' was vulnerable. So I did the update. But then, I got the same problem still. Why? And should I care?

  Please see the attached screenshot.

  The most funny thing is... I visited two sites that use Java, being Java.com, but I haven't seen the black banner of the blocking message.

  The Java Deployment Toolkit can be the most recent version, but Oracle has not yet fixed the vulnerabilities with this plugin; so Mozilla still there on the red list and point require the user to use "Request enable" to deactivate it. A 'soft-block' - can be used if needed, but needs user by implementing action.

  More specifically, do you have a program on your PC that is really needed as Deployment Toolkit?
  Or is your concern that simply that it is disabled after update of Java?

  Very few applications consumer even uses this Deployment Toolkit, aimed at people who develop Java applications or applications such as the various Oracle programs in the workplace.

  Back to before Oracle acquired Sun Java systems in 2010, this Deployment Toolkit has not been installed with the runtime environment Java for users. Java developers needed to install a separate developers Toolbox for this Plugin - had the SDK program.

• When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  When I try to install Microsoft Update (as opposed to using Windows Update), I get the error number: 0 x 80070002

  Hello

  Look in Control Panel - updates of Windows to see what is the KB and post it here. It can indeed not necessary it and
  be able to make a right click on it and HIDE. Let us know what the update is so we can help advise.

  Also, if you don't need it you can try to download it here.

  Microsoft Download Center - research on KBxxxxxx the number of update for anchor xxxxxx
  http://www.Microsoft.com/downloads/en/default.aspx

  Download - SAVE - go to the place where your put it - click on - RUN as ADMINISTRATOR

  If you need to fix the error:

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  Windows Update Error 80070002http://windowshelp.microsoft.com/Windows/en-us/help/c5f4d9e0-3eb6-426b-8118-0cedf489a75f1033.mspx#EJH

  Fix Error 80070002 when using Windows Update in Vista
  http://www.mydigitallife.info/2007/12/21/fix-Error-80070002-when-using-Windows-Update-in-Vista/
  Error Code 0 × 80070002 during Windows Vista SP1 Setup Install - SP2 might have similar problem
  http://www.tipandtrick.NET/2008/error-code-0x80070002-during-Windows-Vista-SP1-Setup-install/

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336

  Error message when you use the Windows Update Web site or the Microsoft Update Web site to install updates: "0 x 80070002.
  http://support.Microsoft.com/kb/956698

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Error code: 80070424 when you try to use Microsoft Update

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  I get an error code 80070424 when you try to use microsoft update, and I can't use the fix it Center, or what I can do... It's on windows xp

  If you believe that you have done this with the same applications or applications, follow the instructions in the order, exactly...

  Search for malware:

  Download, install, execute, update and perform analyses complete system with the two following applications:

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

  Search online with eSet Online Scanner.

  Cleaning the components of update on your Windows XP computer

  It is a good idea at this time to ensure that you continue to get the updates you need. This will help you ensure that your system update is ready to do it for you.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on theroot of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now reset your Windows with this FixIt components update (you'll use the aggressive version - if requested):
  How to reset the Windows Update components?

  Reset.

  The less you have to run all the time, most things you want to run will perform:

  Use Autoruns to understand this all starts when your computer's / when you log in. Look for whatever it is you do not know usingGoogle (or ask here.) You can hopefully figure out if there are things from when your computer does (or connect) you don't not need and then configure them (through their own built-in mechanisms is the preferred method) so they do not - start using your resources without reason.

  You can download and use Process Explorer to see exactly what is taking your time processor/CPU and memory. This can help you to identify applications that you might want to consider alternatives for and get rid of all together.

  Do a house cleaning and the dust of this hard drive:

  You can free up disk space (will also help get rid of the things that you do not use) through the following steps:

  Windows XP should take between 4.5 and 20 GB * with * an Office suite, editing Photo software, alternative Internet browser (s), various Internet plugins and a host of other things installed.

  If you are comfortable with the stability of your system, you can delete the uninstall of patches which has installed Windows XP...
  http://www3.TELUS.NET/dandemar/spack.htm
  (Especially of interest here - #4)
  (Variant: http://www.dougknox.com/xp/utils/xp_hotfix_backup.htm )

  You can run disk - integrated into Windows XP - cleanup to erase everything except your last restore point and yet more 'free '... files cleaning

  How to use disk cleanup
  http://support.Microsoft.com/kb/310312

  You can disable hibernation if it is enabled and you do not...

  When you Hibernate your computer, Windows saves the contents of the system memory in the hiberfil.sys file. As a result, the size of the hiberfil.sys file will always be equal to the amount of physical memory in your system. If you don't use the Hibernate feature and want to reclaim the space used by Windows for the hiberfil.sys file, perform the following steps:

  -Start the Control Panel Power Options applet (go to start, settings, Control Panel, and then click Power Options).
  -Select the Hibernate tab, uncheck "Activate the hibernation", and then click OK. Although you might think otherwise, selecting never under "Hibernate" option on the power management tab does not delete the hiberfil.sys file.
  -Windows remove the "Hibernate" option on the power management tab and delete the hiberfil.sys file.

  You can control the amount of space your system restore can use...

  1. Click Start, right click my computer and then click Properties.
  2. click on the System Restore tab.
  3. highlight one of your readers (or C: If you only) and click on the button "settings".
  4 change the percentage of disk space you want to allow... I suggest moving the slider until you have about 1 GB (1024 MB or close to that...)
  5. click on OK. Then click OK again.

  You can control the amount of space used may or may not temporary Internet files...

  Empty the temporary Internet files and reduce the size, that it stores a size between 64 MB and 128 MB...

  -Open a copy of Microsoft Internet Explorer.
  -Select TOOLS - Internet Options.
  -On the general tab in the section 'Temporary Internet files', follow these steps:
  -Click on 'Delete the Cookies' (click OK)
  -Click on "Settings" and change the "amount of disk space to use: ' something between 64 MB and 128 MB. (There may be many more now.)
  -Click OK.
  -Click on 'Delete files', then select "Delete all offline content" (the box), and then click OK. (If you had a LOT, it can take 2 to 10 minutes or more).
  -Once it's done, click OK, close Internet Explorer, open Internet Explorer.

  You can use an application that scans your system for the log files and temporary files and use it to get rid of those who:

  CCleaner (free!)
  http://www.CCleaner.com/
  (just disk cleanup - do not play with the part of the registry for the moment)

  Other ways to free up space...

  SequoiaView
  http://www.win.Tue.nl/SequoiaView/

  JDiskReport
  http://www.jgoodies.com/freeware/JDiskReport/

  Those who can help you discover visually where all space is used. Then, you can determine what to do.

  After that - you want to check any physical errors and fix everything for efficient access"

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Now that your system is generally free of malicious software (assuming you have an AntiVirus application), you've cleaned the "additional applications" that could be running and picking up your precious memory and the processor, you have authorized out of valuable and makes disk space as there are no problems with the drive itself and your Windows Update components are updates and should work fine - it is only only one other thing youpouvez wish to make:

  Get and install the hardware device last drivers for your system hardware/system manufacturers support and/or download web site.

  If you want, come back and let us know a bit more information on your system - particularly the brand / model of the system, you have - and maybe someone here can guide you to the place s x of law to this end. This isn't 100% necessary - but I'd be willing to bet that you would gain some performance and features in making this part.

• Unable to start the computer after completing the system scan using Microsoft Security Essentials BSOD error (: 0x0000007B)

  Original title: I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials.removing
  I cannot restart my computer and start windows after the analysis of the system running and the removal of any bad programs with Microsoft Security Essentials. I have rebooted, tried to finally start work configiration and back still an error for windows startup. Attempted to enter the mode by F8 safe failed I then chose without auto restart in F8 and get the BSOD - he tells me to search for viruses and run chkdsk/f, but I can't access it. I tried to restart and it still does not work. technical information on the BSOD readings * STOP: 0x0000007B (0xF7ae9528, 0xC0000034, 0 x 0, 00000000 000000000. Please help it is essential to address them ASAP edition)
   

   

  Hello

  You can try the troubleshooting provided in the links below steps to fix the problem.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

• I get error messages try to retrieve e-mail using microsoft live mail and windows 7. Error 0x800CCC92, 0x800CCC90

  I get error messages try to retrieve e-mail using microsoft live mail and windows 7.  For 6 weeks, no problem, then suddenly the error messages saying my name of user and password is incorrect... This isn't the case.  Here is a copy of the error messages:
  Unable to send or receive messages for the Kc.rr (tbrower) (1) account. An incorrect password was entered. The next time that you send or receive messages, you will be asked to enter your user name and password for this account.

  Server error: 0x800CCC90
  Server response:-ERR user name or password.
  Server: ' pop - server.kc.rr.com'
  Windows Live Mail error ID: 0x800CCC92
  Protocol: POP3
  Port: 110
  Secure (SSL): No.

  The problem when research appears to be an old one recently coming back - many incomplete references are found by simply searching for error codes.   I have NEED of TRUE ANSWERS to how a FIX IT, it seems that microsoft and Norton do like eachother according to many comments in the forums... need real HELP, answers not simplistic playbook... that is to say yes my name is typed correctly... etc etc.    What has recently come cause this problem?   old server patches are not possbile - in order not to go there.    Windows 7 is nice, but there are 32/64-bit and subtle incompatibilities issues that are people.     HELP HELP HELP.

  A Server POP3 locking can occur on the server, if you check the messages without leaving sufficient time between the two controls.  A recommended minimum interval is 5 minutes.

   

  Gary van, Microsoft MVP
  ------------------------------------------------

  "Tallboyrip" wrote in the new message: * e-mail address is removed from the privacy... *

  I have the same problem - but so far I have not found a solution! My ISP is Tiscali. If I connect & Download emails from my Tiscali account using the PC of my wife (via Windows Live Mail) all right. If I then try (with your PC off) the same thing on my PC (using the same router) I receive messages if I started the 'cold' PC, but when I downloaded the messages, the POP3 server crashes, causing a blockage of POP3. As a result, I can not any more messages (or send) until I turned off the PC and restarted. I tried to set up a completely new user account and also to move all my emails to a safe place, uninstall Windows Live Mail and then re-install, but neither radical movements has solved the problem. I also tried to switch to Thunderbird, but that didn't fix it either. There is obviously something 'beyond' Windows Live Mail which is not challenged after that the last message was received, which causes the POP3 lock. I hope that someone technical who reads this will know where and what it is and we tell how to fix this!

  Gary van, Microsoft MVP (Mail)

• In Safari, I get the error code BSO D 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

  In Safari, I get the error code BSOD 0 X 80060402, error code Windows defender in the available boot device. He told me to contact Microsoft certified technicians. I do not use Microsoft or windows.

  You have utilities installed on the computer antivirus, cleanup, or other third party maintenance?

• Unable to import photos scanned using Microsoft Picture IT 2002, error: he must be stopped.

  Original title: problem with Microsoft Picture It 2002.

  I've been using Microsoft Picture It on my computer for several years and I really like the program. I recently had to replace my computer a virus, so I chose to buy a new machine and still run Windows XP as I have been for many years. I reloaded the software on the new machine and everything seems fine until I try to import a scanned photo. It goes through the process of analysis very well, but just as he finished the scan it gives an error message and says he has to end! ?? I remember having the same problem when I first loaded the software on my other computer. At that time I contacted support and they helped me to get into the program and I did some kind of change that solved the problem, with their help. I can't for the life of me remember what it was they had me change?! I found a link to a downloadable patch, but the page is no longer valid. I can't find the answer anywhere! ?? I know that it's a simple solution and I hope someone here can tell me what is this simple fix! ?? Fingers crossed!

  Finally, I spotted a link to a working patch that fixed my problem. Looked for a 'pi19299 '. It took awhile to find an active link, but I finally did and it fixed it immediately and my picture it now works fine on my new XP with Internet Explorer Version 8 machine! Hooray!

• Updated MS page error: "files required to use Microsoft Update are longer registered or installed on your computer.

  Original title : Could not get the MS update or reinstalled is recorded on the XP Home SP3 machine

  Problem: MS page update error: "files required to use Microsoft Update are longer registered or installed on your computer.
  Now, I can't verify what has / has not been done!  Updates for years, now he did!

  Sort of bumped into a wall after trying a bunch of stuff. Here's what I've done so far:

  User login was Admin status for all activities tried & emumerees below, the various assignments of site Ms.

  Difficulty of test #1 (software installation)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to install it
  "c:\WindowsUpdateAgent30-x86.exe /wuforce".
  Installation failed with the error number after: 0x8024d007

  Difficulty of test #2 (registers dll files)
  He tried twice with & without entering a "net.exe stop wuauserv" before trying to register the dll
  DllRegisterSerer in c:\windows\system32\wuapi.dll failed. Return code is 0x80070005
  DllRegisterSerer to wuaueng1.dll succeeded
  DllRegisterSerer in successful c:\windows\system32\wuaueng.dll
  DllRegisterSerer in c:\windows\system32\dllcache\wucltui.dll succeeded
  DllRegisterSerer to successful wups2.dll
  DllRegisterSerer in c:\windows\system32\wups.dll succeeded
  DllRegisterSerer in successful wuweb.dll

  (checked the version of the file c:\windows\system32\wuapi.dll is 7.4.7600.226 in the system32 directory)

  Difficulty try #3 (MicrosoftFixit)
  MicrosoftFixit50597.msi--> ran, but he did not set

  Ran the Microsoft 1.0.3001.0 Security Scanner - nothing found

  A ran Malwarebytes Anti-Malware 1.61.0.1400 - no malicious items detected

  I have my "WindowsUpdate.log", but don't see a way of fixing here

  Help.

  Hi Dena. Thanks for check up.

  My machine now works. Here's what happened between my last post and the MS update feature works once more.

  I answered my own question about the SubInACL is allowed file to use on my machine. Googling it I found that it is a 'security descriptor and Editing Migration command-line tool' and that it would work on my XP Home edition. So I have done no harm. But he didn't explain why the machine does not respond to a stop command.

  So, with no harm done and an available restore point, I thought that I would see what the SubInACL program since the drive light was working but no message readable in detail until it was over.

  Googling the first line (echo off) in the batch file led me to a MS page that explains the function of command to echo. If I wanted to see out all I had to do was remove the echo off line. So I used Notepad to remove the line and saved the file. Re-run the bat file then produces a flow of lines in the cmd window - moving too fast to read. I got what I asked for but don't want that I really needed.

  Google "screen xp file output. The second Google result was a link to www.microsoft.com/resources/documentation , which explains how to redirect the output of a command file into a text file. So I followed the example and added a ">" and a unique filename at the end of each line. Worked like a charm. Weres big, very big files. All order lines have reported no failure except HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet which had modified 204160 entries and lines 901 has failed. Looking at a small sample of these faulty items, that they seem to belong to my McAfee AV, so I expect them to be special.

  A reboot of the machine successfully. Still didn't update.

  I ran the MicrosoftFixit program with no error reported.

  Rebooted and found the update feature works again. Cross my fingers batch of this next month of MS updates does not return this ghost.

  Hope someone can benefit from my experiences.

• Error message: the files required to use Microsoft Update are longer registered or installed on your computer.

  As I never had problems with Microsoft Updates in the 3 years that I've owned this computer, I am confused now what has happenned.

  My laptop has a valid copy of Windows XP Professional and has always already been updated successfully, both manually by using the web page for the custom updates and so automatically.

  Can someone please shed some light on the question and how to fix it?  I obviously don't want to need to format this computer.

  I still regularly ran my anti-virus (N360 which is always updated) software and windows defender.  I have also always used Spybot S & D.  None of the mentioned software found no major problems, as I expect, because they are supposed to prevent intrusions. I also run the current Microsoft malicious software removal tool as an extra precaution.

  My problem is:

  After you perform a system restore to an earlier date on my laptop, I wanted to check windows update to make sure that all my security updates are in and up to date.  I opened the page to update as normal, then I accept the license agreement and I continued to the next screen.  Normally, I don't have to do this, he usually directly goes to the page.

  Then, I got this error message:

  The files required to use Microsoft Update are longer registered or installed on your computer.
  
  It is possible for me to choose
   "register or reinstall the files now (recommended)".
  However when I try this option I'm headed to the next web page where I get another error message:

  403-Forbidden: access is denied. You don't have permission to view this directory or page using the credentials you supplied.

  Could be a problem of hijackware but first see this archived thread WinXP general newsgroup: http://groups.google.com/group/microsoft.public.windowsxp.general/browse_frm/thread/4789b22822070e68/ee1886e36b8d6608?#ee1886e36b8d6608

  QED: Have you installed an update to wireless card that had been offered by Windows Update, the other day? ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error BCCode: 1000008e and cannot print using Microsoft word or excel

  Original title: I have 2 questions.

  (1) error message (BCCode: 1000008e - BCp1:c000005 - BCP2:BF9472FD - BCP3:AB6A91D4 - BCP4:0000000 - OSVer:5_1_2600 - SP:3_0 - product: 256_1)?

  (2) I have HP LaserJet 6 L printer and it will print the test page put not print other pages to print such as word or Excel.... etc? Note that the test page didn't print that from the printer not your PC

  Hi TurmanTurman,

  1. Did you the latest changes on the computer?
  2. Exactly when you receive the error message? You are able to boot into Windows after the error message?
  3. You are able to print using WordPad or Notepad?
  4. What happens when you try to print using Microsoft word or excel?

  The stop error 0x0000008E occur mainly due to the following:

  • Drive hard damage
  • Problems of material General configuration with the BIOS, memory, hard drive, or with other devices
  • Incompatible device driver
  • Incompatible software

  Check out the articles below and try the steps mentioned, check if it helps.

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"

  http://support.Microsoft.com/kb/945658

  You may receive an error message on a Windows-based computer: "STOP 0 x 00000050" or "STOP 0x0000008e"

  http://support.Microsoft.com/kb/903251

  I suggest that you see if you can print using WordPad or Notepad on the computer.

  If you are unable to print only when you use the Microsoft office application then I suggest that you post your question in the forums of Microsoft Office.

  http://answers.Microsoft.com/en-us/Office/Forum

• When you try to use windows update I get this error: error number: 0 x 80070424. In addition, automatic updates in Security Center is disabled, and I can't activate it.

  When you try to use windows update I get this error: error number: 0 x 80070424.  In addition, automatic updates in Security Center is disabled, and I can't activate it.

  Tre,

  A KB was created for the error code 0 x 80070424 that appears when you install Microsoft Windows Update/Microsoft Update. The KB includes an automated Microsoft Fix it 50686 that corrects the problem. Look at the following KB: http://support.microsoft.com/kb/968002>

  Suggest you download and save the fix it.

  Then close all open programs and browsers before running MS fix 50686.msi.

  `~`

  Suggest that you first spread malware as the cause of the problem by following these steps:

  (1) have your system scanned by the antivirus/security suite installed.
  (2) run this tool from Kaspersky: how to remove malware belonging to the family Rootkit.Win32.TDSS

  http://support.Kaspersky.com/viruses/solutions?QID=208280684>
  (3) download, install, update and run full scans with two of these tools free anti-malware:

  MalwareBytes AntiMalware

  http://www.Malwarebytes.org/products/malwarebytes_free>

  SUPERAntiSpyware

  http://SUPERAntiSpyware.com/superantispywarefreevspro.html>

  (4) run the Windows XP and Windows Server 2003 System File Checker (Sfc.exe) tool:

  http://support.Microsoft.com/kb/310747>

  `~`

  If no malware has been detected, there's a Fixit on this page which will reset the Windows Update components:

  How to reset Windows Update http://support.microsoft.com/kb/971058components >

  Suggest you download and Save it. Then, close all the open programs and web browsers.
  Run Microsoft Fixit 50202.msi and choose its default mode.
  After that he finished the race, see if the return code is displayed again when looking for updates.

  If not, then run the Fixit once more and choose his Aggressive mode.
  Restart once it is finished and see if the return code always appears when the updates.

  IF malware is detected, then please post if it has been removed and that the specific name of what has been detected.

  Please let us know if it did or did not help to solve your problem.

  If this ANSWER helped, my post as ANSWER of marking close your thread.

  06/26 / 1108:34:03

• Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Sunday 15 May 2011 after trying to use Microsoft Update why I get the following error message? [Error number: 0 x 80070020]

  Hi MikeGoodold,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825