Try World of Warcraft to play on my laptop Windows 7 64 bit.

Similar Questions

• Try to get a USB cable to installed on Windows 7 (64 bit) series.

  I try to get a USB cable to installed on Windows 7 (64 bit) series. Radio Shack model: 26-949. The cable works fine in XP. I tried Radio Shack, FTDI drivers prolific, but to no avail. When I try to load the drivers, it does not recognize the device. When I plug in the device, instead of motorhomes up as a COM port, it appears as "another device-USB-Serial Controller." I completely restored Windows (re-formatted hard drive, reinstalled Windows), but none of the drivers I found works with Windows 7 (64-bit).

  Hi BUBBA211,

  Thank you for using Microsoft Windows forum.

  Check if your USB device is compatible in the Windows 7 Compatibility Center : http://www.microsoft.com/windows/compatibility/windows-7/en-us/default.aspx

  Doesn't seem to be compatible with Windows 7 64-bit edition.

  Contact the manufacturer because they are the best people to answer your question.

  In the meantime, run your USB device compatibility mode.

  Follow the steps from the link to the older in this version of Windows programs : http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-of-Windows
  Hope this has helped
  Aziz Nadeem - Microsoft Support

• Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem

  Hi people, I try to install Lightroom 6 on my pc with Windows 7/64-bit, but the installation occurs an error message indicating that installation of this product under 'Vista' is not possible - but I'm on Windows 7, does anyone can solve this problem?

  Hello

  Please see try to install lightroom 6 on windows 7 continues to receive operating requirement not met windows vista not supported

  Hope that helps!

  Kind regards

  Sheena

• Warcraft III does not install on Windows 7 32 bit

  I try to install Warcraft III, and whenever I try to start the installer, nothing happens. I tried to run in each mode of compatibility as administrator, and nothing happens.

  I downloaded Virtual PC and XP Mode for it and tried to install it on that, and I get the error "The Application could not initialize properly (0xc0000005)" when I try to run the installer. I have to click OK twice until the message disappears.

  The program has never been on this computer, I'm not trying to reinstall, I want to put it here.

  Any ideas at all?

  Hello Ligress.

  I only came across problems using Warcraft 3 on 64-bit.  However, I use the downloadable version, not the version out of the original disc.  If you have a Battle.net account, you can enter your Warcraft 3 CD key and you will be able to download it directly from Blizzard.  It may contain a newer version of the installer that works.

  It won't work on a virtual PC because it requires 3D hardware acceleration. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• Runes of Magic will not play after upgrade to Windows 7 64-bit

  Have upgraded to window7 64 bit that I use now the 8 GB of ram

  Runes of Magic was playing on my old windows version but usually install a new

  Get message that windows could not find a version of the game, so I downloaded the patches for the game manually

  Game Launcher now returns but crashes after I selected the game

  Any help would be greatly appreciated

  Thank you

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the full error message or error code?

  I suggest to perform a clean boot, and then try to download and install the game and check if it helps.

  Clean boot will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows 7: http://support.microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Note: Runes of Magic is compatible with Windows 7 64 bit

  Reference:
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?l=en-us&type=software&s=runes%20Of%20Magic%20&OS=64-bit

  Note: If you still have the problem then I suggest you to contact the game manufacturer.

• World of Warcraft continues displaying this message on Windows 7 Toshiba laptop "Launcher cannot obtain patching information. Please check your Internet Configuration. »

  Whenever I try to launch the game from 07:15 1/11/2011 (today), it keeps displaying the message that the Launcher cannot obtain patching of information and to check my internet configuration. I don't know how to do that or why this problem exists. I just play yesterday evening and it has worked well up to this point.

  We will be performing scheduled maintenance on Tuesday, January 11. Maintenance will begin at 3:00 AM PST and ends at about 11:00 AM PST. Meanwhile, all the kingdoms and many web services will be unavailable.

  It's forums

• Try reading the Lord of the Rings Online on Windows 7 64 - Bit

  I am getting the error telling me to download and install the Microsoft Visual C++ 2005 (x 86) redistributable package. I've done this and installed.
  I restarted the computer and still game errors telling me the same thing. I tried downloading different a few times and even from various sources and still
  I still get the error. What I am doing wrong? How can I fix it?

  Hello swordfish1030,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is a problem installing Windows 7 positions and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro?ITPID=sprblog

  Thank you

  Jack

  Jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• need help to download patch for world of warcraft

  I am running off windows 7 62 bit and I can't download the new patch for world of warcraft. I upgraded my laptop a few days ago and I could download the patches on vista very well, but with windows 7, I get to 10% then an error message saying "could not initialize storage. you don't have permission to write to the destination path. "How can I get past this so I can download the patch (currently on the burning crusades expansion)

  Try this:

  http://social.answers.Microsoft.com/forums/en-us/vistagaming/thread/9aa97076-81d6-4fc9-8a2c-eacbf9d84921/

• World of warcraft installation

  try to install world of warcraft on my computer toshiba laptop.  im not getting an error message, but the prompt to insert the next disc is not coming.  If someone could help me I would be grateful.

  Hi daddybigmac69,

  Installing the game cannot continue due to some reasons such as:

  (1) the game files corrupted in DVD
  (2) scratches or impure DVD
  (3) previous installation of World of Warcraft files on the computer that could not be rewritten.
  (4) the safety programs or any other application blocks the installation.

  Try following these steps and check if it works:

  Step 1: Clean the disc Clean the CD or the DVD. To do this, use a disc cleaning kit. Or gently wipe the silver side of the disc with a soft and Lint cotton cloth. Do not use cloth of paper which can scratch the plastic and leave streaks. When you clean the disc, wipe from the center of the disc outward. Do not use a circular motion. If the problem persists, clean the disc with a damp cloth or a commercial CD or DVD cleaning solution. Dry the disc thoroughly until you insert the disc in the drive.

  Step 2: Install and then start the program by using a different CD or DVD drive

  The CD drive may be unable to read the product CD. Try to install the program by using a different CD or DVD drive on the same computer or on another computer. To do this, follow these steps:

  1. Insert the CD into the CD or DVD to another computer player or a second CD or DVD drive on the original computer. The installation program should start.
  2. Click install Express .
  3. Follow the instructions that appear on the screen to install the program.

  If the installation is successful and you can start the game in this test, the problem may be that the original CD drive or the DVD drive cannot read the game CD.

  Step 3: Use the Windows Installer CleanUp utility

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe (http://download.microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe)

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start , point to all programs and then click Windows Installer CleanUp .

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all , and then click Remove . When you have deleted all entries, click exit , and then start the installation of the product. For more information, click on the number below to view the article in the Microsoft Knowledge Base:

  290301 (http://support.microsoft.com/kb/290301/) Description of the Windows Install CleanUp

  Step 4: Create a new user account in Windows

  (a) if the computer is connected to the Internet

  See the section "Create a user account" on assistance in following line of Windows and Support Web site: http://windowshelp.microsoft.com/

  (b) if the computer is not connected to the Internet

  See the topic "Create a user account" in Windows Help and Support on the hard disk of the computer as follows:

  1. Click Start and then click Help and Support .
  2. In the search help box or in the Search online help box, type create a user account and then click on Search Help .
  3. In the list of topics, click on create a user account .
  4. Click on the link that best describes the problem you are experiencing.
  5. Follow the suggestions to solve the problem you are experiencing.

  Returned items: http://support.microsoft.com/kb/258496
  http://support.Microsoft.com/kb/968365

  If the above steps and items do not fix the issue, I recommend contacting support of World of Warcraft
  http://www.Blizzard.com/us/?rhtml=y

  Thank you and best regards,
  Abdelouahab.

  Microsoft Answers Support Engineer

• I play world of warcraft when I use a voice chat program while I play the dumb of vista, the game, how do I stop doing that? I use mumble for voice chat___

  that I play world of warcraft and I start to mumble vista mutes the game how can I stop at vista muteing the game?

  Hello Papastew10, I don't think it's something that makes Windows Vista.  Sounds like that, it's something controlled by Mumble, so there should be some options for that somewhere.  If not but you might be able to substitute by right click on the speaker icon in the system tray and choose Open Volume Mixer, try to adjust the volume of World of Warcraft from there. Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• I get an error when I try to install World of Warcraft.

  From: KPizzle

   
  Hi, whenever I try to install WoW on my laptop Dell Inspiron 1520, I get the following error at about 98% of the way through the installation.

  "The file"C:\Program World of Warcraft.temp\Data.temp\enUS.temp\Documentation.temp"could not be renamed to"C:\Program World of Warcraft.temp\Data.temp\enUS.temp\Documentation".

  (ConflictManager::ResolveConflicts/1) »

  I am running Windows Vista and I have a 8600GT with 2 GB of ram.  I have no idea why this happens, can someone find a solution for me please?

  Thank you!

  From: Mark

  There are a lot of people on this list who are playing WOW under Vista so it must work.

  A couple of easy things to try:

  1 - remove the folder C:\Program World of Warcraft.temp. Its possible that it I messed up during the installation of the system and the file is locked, preventing new attempts to working installation.

  2 - right click on the file setup.exe on your cd and select 'Run as administrator', it might be useful if it's a permissions problem

  Hope thelps!

  Mark

  Another response of the community of Windows Vista discussion groups

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error message appears when you try to connect to World of Warcraft. The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error

  Original title: icm32.dll error message of World of Warcraft

  Error message appears when I try to connect to World of Warcraft.  The message indicates that the System32\icm32.dll is not designed to run on windows or contains an error.  This pop-up has an "OK" button that you can click, but the message appears again and again.  I am running Windows 7 Pro 64-bit and never had this problem before and I don't know how this file was damaged

  System Type x 64-based PC
  Processor Intel Core i5 - 2500K CPU @ 3.30 GHz, 3301 Mhz, 4 Lossnay, 4 logical processors
  BIOS Version/Date American Megatrends Inc. 0805, 10/11/2011

  What should I do to solve this problem.  And any idea on what may have caused the problem.

  Thank you

  Hello

  1. What is the exact full error you get when you try to play the game?

  2 have you made changes on the computer before this problem?

  Method 1:

  I suggest that you try to perform the SFC (System File Checker) scan on your computer and check if the problem persists.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  I suggest you to check the question in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  NOTE: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 3:

  I also suggest that you scan your computer with the Microsoft Safety Scanner. The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: All data that are infected must be cleaned only by deleting all of the data, which means that there is a risk of data loss.

  If the problem persists, contact the game manufacturer for assistance.

• Is it smart to play games like World of Warcraft on a macbook pro 13'

  Hello

  I'm new to this forum, because I just bought a Macbook Pro 13' of 2015. I used to play games on a computer with windows laptop, but I bought a Macbook Pro for my work and study. I want to play games, but only if its not harmful for my Macbook. I tried to play WoW and he did work properly but the thing is that the fans inside the macbook has started to blow very hard. And the macbook started to warm up, I don't really know if it's a good thing...

  The question is: is it smart to play games like World of Warcraft on macbook pro 13' (2015)

  I really hope that there is someone in the same situation as me, and he can tell me his opinion on this subject.

  Play with the airy machine on a clean surface to allow better air circulation.

• Can satellite A300 - I play World Of Warcraft?

  Hi guys,.

  I want to play World Of Warcraft, but my video card is not good enough. I'll give you my computer information and the details of the video card I want to buy. Please let me know if it works on my laptop and I want to play the game.

  MY DATA FROM THE COMPUTER
  System manufacturer: TOSHIBA
  System model: Satellite A300
  BIOS: InsydeH2O Version 1.80
  Processor: Intel (r) Core (TM) 2 Duo CPU T6400 @ 2.00 GHz (2 CPUs), ~2.0GHz
  Memory: 3964 MB of RAM
  DirectX version: DirectX 11
  Name of the current video card: Mobile Intel (r) 4 Series Express Chipset Family
  Manufacturer: Intel Corporation
  Chip type: Mobile Intel (r) 4 Series Express Chipset Family
  DAC type: internal
  Monitor: Generic PnP monitor
  DETAILS OF THE MAP, I WANT TO BUY
  Series GPU: NVIDIA GeForce 400
  GPU/VPU: NVIDIA GeForce GTX 460
  Additional features: NVIDIA CUDA
  NVIDIA PhysX
  NVIDIA 3D Vision Surround Ready
  Profile of video card: Double
  Video memory: 768 MB
  Memory type: DDR5
  Memory interface: 192-bit
  Stream processors: 336
  Memory clock: 3696 MHz
  Shader clock: 1400 MHz
  Band memory bandwidth: 91.2 GB/sec.
  Interface type: PCI Express 2.0
  Interface speed: 16 x
  Connector (s): Dual DVI
  Mini HDMI
  Multiple monitors support: Yes
  Max monitors supported: 2
  Support multi-GPU: SLI
  Overclocked: No.
  API: NVIDIA CUDA
  DirectX 11
  1080 p support: Yes
  Video output: HDMI DVI

  I think you should visit the site Web of World Of Warcraft and need to check the hardware requirements.

  I think you should be able to play this game but I can't say anything about performance.

  As I said above; You should investigate some World Of Warcraft forums to learn more and read the threads posted by others who have played this game using different hardware configurations.