Try to get a USB cable to installed on Windows 7 (64 bit) series.

Similar Questions

• I have the software for the wheel to feed Force Microsoft SideWinder, but I can't install in windows vista 32 bit home edition

  I have a real problem, try to get the sidewinder software to install to my wheel feed Force Microsoft, it sends a message indicating that it has problems of compatibility with the program and stops the installation

  the name of the program is SWGameEn.exe he used to work in XP Pro why used it work in Vista 32-bit Home

  Hi Mike I finally found a program that works with the Sidewinder wheel and Vista, it is only a small program, but it allows you to program all buttons on any controller.

  I'll post a link here little time if you want me too, that way another person might benefit from also

  http://www.deinmeister.de/JCT.htm

  It's all in German I think lol, but it's pretty easy to get out. Just run the program with your gamepad or steering wheel plugged in and press a button and watch the program, if button 1 is pressed then follow him up to the line upward with an empty square (left) and then click on the empty box (you will be asked for a key on the keyboard) press the key that you want to work with the key #1.

  Then to activate the button make sure you click area is pressed next to the inline box keys with line #1-si someone can not understand my instructions, they can send me an email and I'll send them back with pictures that explain it better

  Click on my name

• (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?

  (64-bit capable) 32 bit Vista Home Premium... I can do a clean install of Windows 7 64-bit professional?... from a flash drive?... to change the boot order?... or at all?

  Hello

  That's right; with Vista Home Premiun upgrade paths are for Windows 7 Home Premium or Ultimate.

  It is one of the reasons why you should do a clean install.

  The other reason is that you can NOT put 32-bit to 64-bit.

  You need a clean install to do.

  Follow these steps before you install or buy Windows 7:

  Go to your computer / computer laptop manufacturer Web site and see if Windows 7 drivers are available for your make and model computer / laptop.

  If this is not available, Windows 7 will not properly work for you.

  Run the "Windows 7 Upgrade Advisor.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=20

  Check if your specifications are compatible for Windows 7:

  "Windows 7 system requirements"

  http://Windows.Microsoft.com/en-us/Windows7/products/system-requirements

  "Windows 7 Compatibility Center" for software and hardware:

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 upgrade paths:

  http://TechNet.Microsoft.com/en-us/library/dd772579 (v = ws.10) .aspx

  «Installation and reinstallation of Windows 7»

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7

  _________________________________________

  And it's a way to do the clean install of Windows 7 DVD forn and Flash Player

  http://www.SevenForums.com/tutorials/1649-clean-install-Windows-7-a.html

  Using the USB method:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  See you soon

• Can we install windows vista 32 bit OS on a computer that is pre installed with windows 7 64-bit OS?

  Can we install windows vista 32 bit OS on a computer that is pre installed with windows 7 64-bit OS?

  "ZainS" wrote in message News: * e-mail address is removed from the privacy * .com...

  @ Ken... I tried installinng windows vista by using the recovery disk that will get a customer with the computer dell laptop... and then he was trying to install vista on my computer... It works fine when installing files, but it is and stucks where he says 'finish installation' and he won't do anything after that... I tried to restart my computer and I could see Microsoft coportation logo and then my computer stucks to this screen and wont connect in... not sure what exactly to do... by the ways for your reply thanks

  You cannot use recovery discs to install with, if not for the exact model computer that you install.  You need a full installation detail of the model of Vista operating system you want to install since you don't downgrade your operating system to a system that offers no right of demotion.

• Portege M750 - PCI controller is not installed on Windows 7 64 bit software

  Hi, got a SSD upgrade for my machine so decided to do a new install of Windows 7 64 bit and now I have and error indicating that the PCI controller software is not installed, I have tried windows update no. chance - to ideas please?

  Thank you, Peter

  Hi pbaker_1,

  Hmm... PCI controller could mean everything... I think you forget to install the driver for this device

  What is the device ID and the seller of it?

• ThrustMaster Top Gun Fox 2 Pro do not install under Windows 7 64-bit

  I have a Thrustmaster Top Gun Fox 2 Pro and it will not install in Windows 7 64 bit, Windows reports it cannot find a driver.  The manufacturer says not all newer than Windows XP drivers.

  I thought about it:

  1. Download ftp://ftp.thrustmaster.com/accessories/pc/hotas/exe/HOTASCOUGAR/2007_HCO_VISTA_64_RC1.exe (Vista for their Cougar Joystick driver)
  2. Make a click on the file and choose Run as Vista Sp2 compat mode and run as admin.
  3. Run the installation program and the joystick connection when you are invited (and installed).
  4. End task on the Setup (it is always waiting for the cougar to be plugged).
  5. Enjoy!

• Try to get a USB capture card to work

  I just bought a certain T610 more units. I try to get a Hauppauge USB Live-2 capture card to work. I get a driver has not loaded or corrupt the question. I tried this USB on a PC and it works fine. The system is 6.1.7601.286 English. I had a problem earlier with adding users after joining a domain, but found the question. I think it's a problem of permission in system32, but can't seem to find it.  Any help would be great.

  Lou

  Without worrying if PCI or USB, the OS for TV Tuner compatible components is not present in the image.

  Custom images are available after sales and pre-sales.

• HP OJ 6500 via USB cable for Dell PC, Windows XP prevents the PC to start with the power of the printer is on

  I just installed a HP OfficeJet 6500 to a Dell PC via a USB cable, using the software on the CD supplied.  Everything works well, except that if you try to restart the PC, it crashes before you can enter the Setup screen.  If the printer is turned off before the PC restarts, all right.  I'm clueless as to what is happening.

  HP OfficeJet 6500 E709 (brand new, just out of box)

  Windows XP, home edition, Version 2002, Service Pack 3

  Dell Dimension 4600 SUN, Petium 4 CPU 2.40 ghz, 256 MB ram

  Found solutions by working with HP chat.  Ended up having to go into the system setup on Dell PC and changing a setting to prevent USB devices to be allowed to be accessed during boot up.

• Try to format and do a clean install of Windows Vista on an old my computer HARD drive at home to be placed in a new Tower. The installation does not start.

  Try to format and do a clean install of Vitsa on an old my computer HARD drive at home to be placed in a new Tower. DVD starts up fine and then goes into an endless loop of the repair system that continues to check the c: / drive to find errors. Why is the installation does not start? I know that the folder c: / drive has Vista OS on it from my old compuetr. I want to wipe off immediately and start cleaning up.

  original title: try to install clean vista

  You must set your BIOS to start on the DVD from the beginning to the top.

  You have a good DVD of Vista (OEM/upgrade or full version) and NOT only a recovery disk provided by the manufacturer of the PC (or you burn you).

  For a DVD upgrade, follow the method here and make sure you format your HARD drive thanks to the tools of "advanced install" on the DVD.

  http://www.Vistax64.com/tutorials/68767-clean-install-upgrade-Vista.html

  If you have a full version of Vista rather than a version upgrade then just do the first part of the above procedure.

• Try to get the old software to work on Windows 7

  I am trying to run old software on my Windows 7 PC. It's a language program that was given to me recently. When I insert the disc and try to run the program I get the following error message. "the version of this file is not compatible with the version of Windows you are using. Check your computer's system information to see if you need a x 86 (32 bit) or x 64 (64-bit) version of the program and then contact the software publisher. "Then I tried to run the program in compatibility mode with the two 95, 98, 2000 and Windows XP however whenever I test with one of these compatibilities nothing happens. Then once I have troubleshoot it tells me I have a question that is "Application Incompatible." Is there anything else I can try to get the program to work?

  Hello

  If you have Windows 7 Professional or ultimate, you can try XP mode...

  http://www.Microsoft.com/Windows/Virtual-PC/

  Tricky

• Problem in installing the USB for HP 15-D009tu Windows 7 64-bit driver

  Hello

  PL. provide us with contracts for the installation of webcam & USB driver for laptops HP 15-D009TU in which after installation

  Readers USB in Windows 7 64 bit does not work and it has yellow question mark in front of the USB driver in Device Manager.

  Driver HP url does not work for the same. C. HP care too are not having solutions at the moment.

  @MT1971

  I asked HP. The official answer is that HP has no plans to release a USB driver 3.0 for your laptop computer to the Windows 7 operating system.

  You might want to consider reinstalling Windows 8, so you can enjoy all the features of your laptop.

• How to uninstall Windows 7 32 bit or get the clean install of Windows 7 64 bit to work properly.

  Today, I bought and installed windows 7 32 bit as an upgrade from vista 32-bit, shortly after I spoke to my friend and he told me that I could have used the disk for 64-bit and Windows 7 64 bit instead, the problem now is that I can't find a way to remove windows 7 32 bits using other methods I've seen here as the file Windows.old, it isn't here. Also I cannot perform a clean Windows 7 32-bit to windows 7 64 bit installation because when I insert the disk it says that I need to boot from the disk, so I tried then whenever he says failed to load. IM fine with doing a clean install and losing what I have, because I have them the settings and files saved externally already so no need to save again.

  Thank you very much

  Mango

  Looks like you're stuck with a clean install of Vista's original support for start.

  Messages rating helps other users

  Mark L. Ferguson MS - MVP

• HP Laserjet P1102W - cannot install on Windows 7 64 bit

  Hello

  I'm unable to install the software for my laserjet p1102w. I tried the install CD, USB install and install downloadable. I get the error message is below. I ran through almost every tutorial tech support on the HP Web site as well as a few websites of third 3rd, and I'm about to throw this printer out the window. A few things about my setup: the printer is already connected to the network by other computers (Vista, who had no problem with installation). I am running Windows 7 64-bit on an Acer Aspire 5745 G.

  

  Hi smcconn5,

  There are a few other things that we can try to get the printer completely installed and operational.

  Unplug the USB cable.

  Uninstall the software from the CD.

  Go to start, computer, right click on the CD drive and select open, and then double-click on uninstall.

  Restart the computer.

  Then go back to start, computer, right click on the CD drive and select open, then right click on the installer and select run as administrator.

  I hope it will work.

  Another that you can try is to create a new user account with full Admin rights and try to reinstall the printer. How to create a new user account in Windows 7

  If you still have questions then I would contact Microsoft to see if they can help with this error to the administrator.

  Let me know how make you out.

• HP Color Laserjet cp1215 won't install on Windows 7 64 bit drivers

  I downloaded the new drivers from HPs website, installed the new drivers/software, did not work.  uninstalled from Add/Remove of

  rebooted, reinstalled it, no luck.  Let him trying to fix by searching of Windows updates.  Did not find all the drivers.  It says no drivers loaded when you look at the properties in printers and devices.

  Cable USB Windows 7 64 bit, HP Color Laserjet CP1216, is about 6 feet long, USB 2.0, it connects via a docking station.

  The user was eager and since I don't get to this plant every 2 or 3 weeks, I advanced and changed his HP black-and-white laserjet printer.  So I guess this could be considered to be resolved, because I have no longer works on it.

• Scanner install problems - Windows 7 (64-bit)

  Recently upgraded to Windows 7 (64-bit) and everything was fine until I tried to replace my flat bed scanner and are now trying to get two scanners work. First scan was listed (as was the second on the compatibility Web site) Scanner Canon CanoScan LiDE200 USB. Went on Canon's site and downloaded the Win 7 scanner software and installed (after removing the previous version). Tried running the software and got a message "memory" and has been unable to act. Went to 'devices' and 'right click' the scanner and was able to scan using the windows software, so scan worked. Original printer took over and bought an Epson v30 scanner, same problem, installed new software (Epson Scan 3.04). Doulble click on the shortcut of Epson Scan, but nothing happens.
  A scanner does not and I think it's the materials, but both makes me think it might be something else, please notify

  If Irfanview doesn't mean that you are 'Twain' drivers are the problem.

  I have a Windows XP roceedure that usually fixes this kind of problem, but have yet to try it on Windows 7. I posted it below in case you are interested, but go forward with caustion. Note that some of the steps/information I already posted, but I'll post the procedure in his entirerty.

  ---------------------

  If you connected the printer multifunction/scanner to your PC and then
  installed the printer drivers/software, the chances are very high
  the printer can operate but function scanner will not.

  Most scanners or printers of multi use require
  that you install the software before connecting the scanner or printer/scanner.

  Step by step instructions:
  (1) unplug the MFP or scanner.
  (2) uninstall the printer/scanner software and two pilots to help
  the Add/Remove Programs option.
  (3) look/search folders associated with your printer/scanner model
  contains "Twain" files, if the files still exist after uninstalling.
  Delete these files and related files.

  Note: In the list of files that is found you can ignore everything
  files listed in:
  C:\Windows
  C:\Windows\system32\...
  C:\Windows\ServicePackFiles\...

  NOTE: In the C:\WINDOWS\twain_32 folder: you have
  one or more files. The one of "do not delete" is called: wiatwain.ds
  (wiatwain.ds is installed by Windows XP)
  All files in this folder were likely created when you
  installed the printer/scanner. Check each of the files 'Properties' and if has the
  brand of your scanner (Epson, Canon, HP, etc.), identified as the
  company/brand, these files can be deleted safely.

  On my PC I have my scanner HP twain file located in:
  C:\Program Hewlett-Packard\Precisionscan Pro 3.1\TwainCtrl.ocx
  There should be something similar on your PC, so in my case at least
  I would like to uninstall the software of Scanner HP and if it ' file TwainCtrl.ocx
  is still there after you have uninstalled the scanner software I would delete it.
  I have also a second that the file named "Twain_32.dll" TWAIN located:
  C:\Program Files\Adaptec\Easy CD Creator 5\PhotoRelay

  (4) check the Device Manager and remove all the entries if necessary.
  (5) create a Restore Point
  (6) analysis the registry using the name of brand/make of the scanner as a keyword for
  image search. (Remove all entries are, but make sure it's a connected scanner entry)
  7-restart the PC and check once more the Device Manager.
  It should not show any announces the printer/scanner.
  (8) now reinstall the software and two pilots.
  (9) shut down the PC.
  (10) the PC power turned off, connect the printer/scanner, then
  restart / Windows startup.

  Note: Sometimes there might help you try a different USB port if you
  printer/scanner is a USB device.

  An easy way to test your installation of the twain driver software work, s
  is to use a graphical editor named IrfanView.
  http://www.IrfanView.com/

  If you download, install and run this software,
  located in the menu bar is an option named "file".
  By selecting the 'File' option, you should find a
  (near the bottom of the list) option for named:
  'Select the TWAIN Source', click this option
  and then a popup should display valid Twain sources
  for scanner you. If you see your scanner from the list,
  Select it, and then try to scan an object (picture).

  By selecting the Twain Source in the file menu IrfanView should load
  your scanner software and then scan.

  If you choose the option "Copy Shop" also in the file menu you have the
  possibility to bypass your scanner software and directly scan a photo in
  IrfanView. Try the option "Copy Shop" and let me know what happens.
  Note that "Copy Shop" list of your Photo editing/scanning scanner
  software and hardware name (make and model) of your scanner when
  you click on the button "Select Twain Source" of the photocopy shop.
  You should choose the scanner hardware option.

  For example, on my PC the software Photo retouching/scanner is named:
  «HP Precisionscan Pro 3.1 "»
  The second entry "Twain list select the Source" Copy Shop is my scanner
  brand / model that shows that:
  "WIA-HP Scanjet 5470 C 1.0"

  So for me when you use Copy Shop, I select the second entry when
  prompt to select the Twain Source.
  I then check the 'Twain with the preview.
  (I mark this option if the scanned image does not directly)
  to the printer, but on the contrary is displayed in IrfanView).
  Then I click on the button 'start' location has the lower part of the photocopy shop
  window to start the search.

  JS
  http://www.PAGESTART.com

  Never be afraid to ask. This forum has some of the best people in the world to help.