Trying in vain the nested model CS4

I created a page with a header and footer with 1 available pass header and footer fixed and most later recorded as a model after I had designed page like I wanted. I had put a Spry menu bar in the header area and the editable main content div after implementation of the model. Creating child pages from this model is is very well conducted. Then, I decided to add a secondary navigation bar on the side for a second series of pages on the site after reading DW CS4 Missing Manual (p. 755 McFarland). He gave this example as a good time to use nested templates. I created a new template (nested model) on the original model, then add a div tag in the div of the main content (the editable area only) placed a new bar from Spry menus in the div tag I added the div as compound selector, named .oneColFixCtrHdr #sidebar.

Everything went smoothly, except one (planned, I guess) coupling. Being in an editable area, the side menu is editable as well, and wanted further changes to the sidebar of the nested model to reflect down to child pages. So, I followed McFarland and insert an editable region empty in the sidebar div to overcome this obstacle. That did not work as he claimed he would. Although changes in the sidebar now appear on the pages of the child, the main content div was more editbable in the pages of the child. I tried a creative work around trying to temporarily insert an editable region empty in the div sidebar to change the sidebar that would lead down to the pages of the child; then after making these changes, remove the editable empty that I inserted, so that the main content div would resume its editibility in the pages of the child. It worked, except a serious hitch - when changes have been made to the menu in the sidebar model nested (with the inserted editable empty), content for the main content div of the nested model is transferred to the child pages as well - lose any content already existed in the pages of the child. That won't work!

I wonder if originally the sidebar should be put in place in the main model as a separate region of the div. of main content but, I didn't have a sidebar in the original model, which seems to complicate things.

I also wonder if what I'm doing could not achieved by the implementation of the sidebar as an optional region in the main model instead of trying to achieve with a nested model (have not already tried optional regions, so I don't know). I'm not too deeply in the design, so I'm ready to go direction to get the best possible results, even if I have to go back a bit. I spent many hours trying to understand this point, and it baffled me. It's all part of the learning process, I guess...

Oh, you're right. You put some of the menus in optional regions. Well, why not put javascript code at the bottom of the page also in optional areas? Then you can turn off the power when you don't need them both on when you need it.

In this way, the javascript code to show nor cause warnings warning because it won't be there!

About how the var at the bottom of the page code work with menu bars, don't forget that there are also linked javascript file which is the real engine behind the functioning of the menu bar. And you may also notice, especially on the pages where you have two menu bars, each variable set at the bottom of the page is unique. If I have read and understood a little better Javascript, I could be more specific, but suffice it to say that these assignments to variables at the bottom of the page file as much as say in javascript, "see this MenuBar1 up there? Do the work for me... And see MenuBar2 up there? This work, also. »

For the brothers of the Atonement, my link is the Director of Internet Communications at Graymoor. He praised the work of an artist in New York. Then he hired me to do the job of the Spry menu bar (in all kinds of weather... so to speak). We got along well, and he decided that he would rather call all the coding to me. But we have worked very closely together... He knew what he wanted in the end, and I knew how to get there. When one of us has tried something new, we have conferred and came with the best result.

Now, I'm writing a description of how the functions of the site (for its use and this possibility "in the case of one of getting us hit by a bus"... hopefully it never comes to that!) The interesting part of the employment relationship, is that I never met the gentleman face to face until after the site was launched, and we worked on it for 9 months.

Ah, modern life!

Beth

Tags: Dreamweaver

Similar Questions

  • Trying to create the ebay model, designed in Fireworks, when I import to dreamweaver I carnt change

    Hello

    I create a model from ebay and I designed the boxes and the banner that I want, etc,

    When I import into dreamwaeaver I change carnt, its as an image, I slit it and imported html code

    I have no hasve a lot of experience with dreamweaverr, I was hoping someone could point me in the right direction.

    I want to use what I've drawn in fireworks for my model, which I guess must be created in dreamweaver.

    for example, I created a description area which, in the model, I have to be able to type in etc.

    hope sombody help would be greatly appreciated

    Thank you!

    Predictably horrible HTML, but why don't say you you can't change it?  There is nothing that would prevent you from being able to change anything on this page.

  • Nested models are not supported, what is the alternative

    I'm developing an application which is the first of many in a portal environment. I am now trying to come up with a reusable template for all applications, but within the applications, I also want a model in which we show the menus and tabs and others. So basically I need a main model and several application templates. I read that the nested models are not supported, so, what's the alternative?

    Hello

    I use 11.1.1.5.0, it works for me

    I guess that there is no work around to make it work in 11.1.1.3?

    See, PageTemplates expects what pageTemplates page and the consumer should have unique ID, please ensure that you have unique IDS.
    You can have a 'special' prefix ID components in the pageTemplates pages and the consumer

    Published by: Santosh Vaza on 12 March 2012 18:21

  • Import the SPICE model for transistor BJT BFP720F in Multisim

    Hello

    I'm trying to get the SPICE model for the BFP720F transistor provided by Infineon to work in Multisim.

    I have attached the template as provided by the manufacturer.

    If I import it as-is, I get error messages "invalid node identifier '<4>'" (I have translated that German, it might not be exactly this message in the English version).

    So I tried to replace all the "<4>" with "4", which seems to help, but now the error is "adjusted temperature setting"VJC (PC)"negative" and "incorrect use of the parameters of the model. Now I don't really know what to do with it.

    Is the template provided in the wrong format? I somehow can it in the right so I am able to use it?

    Because I need for my project semester in College, any help would be much appreciated.

    Thanks in advance!

    Hi NikoNR,

    When writing a detailed description of what I did exactly with the Wizard component, the component again to create in Multisim from scratch, I found that there are different SPICE models provided in the package for use with AWR MWO. They have a different file extension, but are normal text SPICE inside files.

    It turns out that they actually work with Multisim. The difference is small, there is only one temperature (TNOM) setting that is absent in these models, distinct from the "general" I first tried to use. It seems that Multisim had a problem with this setting, leading to the error I encountered.

    Anyway, the problem is solved now. Thanks for your help

    Good day

    (The now much happier) EE-student

    ----

    Edit: I have attached the SPICE model, that I ended up using, in case someone at - he never met a similar problem. The only change I did this, is to replace '<4>' with '4' in the part of the diode (single occurrence here). I had to zip to download with his original extention (.mdl).

  • Nested models

    Hello, I would like to be able to use templates that are nested in a site, I produce, but is it possible with the way BC treats models?

    The way I see it, the parent model would need to have the snippet of the BC model in it like the nested model, then it would cause an error when downloading to the servers of BC. Any help would be welcome

    Thank you

    Martin

    Hi Martin,

    For more details on the holders of content, see article below.

    - http://kb.worldsecuresystems.com/103/bc_1034.html

    The screencast present holders of content in the older UI.  To locate the licensed content in the current user interface, go to your site administrator via the site-> owners of content manager.

    I hope this helps!

    -Sidney

  • in the nested table clause

    HIII

    I created a nested table
    There as rows and columns.
    now I'm trying to retrieve the nested table data, I found this application and it works can any body tell me what that c and value (c) mean in the query below

    Select value (c) of the (select cl vir where age = 22) c;

    810345 wrote:
    now I'm trying to retrieve the nested table data, I found this application and it works can any body tell me what that c and value (c) mean in the query below

    Select value (c) of the (select cl vir where age = 22) c;

    What version of Oracle are you using? THE is obsolete for ages. Use of TABLE operator. VALUE is built-in and is documented.

    SY.

  • What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

    What is a substitute for the migration assistant? I tried in vain for three hours to migrate files from a macbook pro to each other so that even if connected with the ethernet cable the computers never see each other.

    You can connect otherwise?  USB or FireWire or love at first sight?  You can connect both machines and start the one you want to transfer to target disk mode.  If your other machine is up and running with an account on it and you just want to move files, you can simply drag and drop the FRO the machine mounted TDM, or you can use the migration wizard.

    Or, if the other machine still starts and runs, you can start both computers and connect to the same wifi network and share the hard drive like machines on the network.  Access them in the finder on the new machine files and drag-and - drop, or use the wizard migration, on wifi.

  • I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button.

    I replace my airport express with the new model. Flashing orange. It works, but cannot configure security. Tried to reset via the reset button. Tried unplugging and tried unplugging the modem. I would like to fix.

    Modem... doing and... model number you have?

    What operating system do you use on your Mac, or you are using an iPhone or iPad set things up... or a PC?

  • The Adobe Suite 4 Design Premium is available for download for windows PC? I have difficulties to find it for purchase. I tried to download the links on product Creative Suite CS4 help/download page. I do not understand how to provide a serial number

    The Adobe Suite 4 Design Premium is available for download for windows PC? I have difficulties to find it for purchase. I tried to download the links on product Creative Suite CS4 help/download page. I do not understand how to provide a serial number for a product that I can not download.

    No, you can not buy CS4, only CS6 - Link to buy CS6 via phone http://www.adobe.com/products/cs6.html

    If you already HAVE a serial number CS4, kglad links in response #1 here can help https://forums.adobe.com/thread/2017859

  • I tried to make a website using the template, but it just goes back to the original model of Muse LOO LOO

    I tried to use a template to create a Web site and I finished one I was happy with, but when I go to download it all I get is the original model, how do I get my site up there that I know has been FTP'd and the same thing happens in the catalyst.

    You may need to clear the cache of your browser on your mobile or you will have to just wait until the devices reset themselves.  This is a feature that saves you from having to reload the page even over and over again by storing on your device if you do not have to re-download data.  Each of my devices has some kind of delay on the reloading of data, you can add a page header that will force the page to reload and no caching.  So you will see new support content every time.

    That paste in the html code for face plate on the metadata tab for the page you want to disable the update cache or in the same section for the master if you want to apply to several pages!

  • HP 19-2113w: tried to reset the computer in vain

    I tried to reset the computer to the original values and it does not start but runs in circles, "diagnose your PC in the preparation of the auto repair." I tried, it seems that all the option on the splash screen, without success. Help!

    I've lost count of how many times I've done this and lost count of the variety of options, I tried to get the operational computer

  • How to run the callback model SequenceFilePostStepFailure after step fails with the calls of the nested sequence

    Hello

    I want to appear a message immediately box on any test failure.  I thought I could use the reminder of the SequenceFilePostStepFailure model to achieve this, but when I change the reminder of process model to achieve this, I found that the recall code is executed only for the failures of step of the top level of the page sequence file.

    My test code has sequence called before mutiple files to the granularity of the basic numerical limit test that range from success or failure, so I would like to run the callback SequenceFilePostStepFailure immediately at this level.  I can accomplish this by adding a substitution of recall of SequenceFilePostStepFailure in the file of the sequence in question, but I prefer to use the implementation of reminder default template, so I can't find all the places where numerical limits tests are executed and cause the ASE of pass/fail.

    I have attached a few sequences of the example I want to illustrate the problem.

    Thanks for the help,

    Daniel

    My fault, I see now that the recall of model should I have changed is the ProcessModelPostStepFailure.  Problem solved.

  • trying to play the game gives the error that I need shader 2.0 model

    Game

    What should I do if I bought a game and installed and went to play and he got a pop-up that said it need a shader model 2.0?

    Hello

    What is the name of the game? and what is your graphics card (the name of the model and manufacturer)?

    The Shader model 2.0 is inside the graphics card - I think that your graphics card does not support Shader model 2.0. Look at the minimum hardware required for your game.

    LC

  • Error trying to update the model XML using XML Publisher administrator

    Hello people,

    We are on R12.1.3

    I changed a condition in a report and you try to download the new model XML using XML Publisher administrator.

    When I click the button to apply, it is throwing an error "bad request".

    Navigation: XML Publisher Admin > data definitions > query report

    Click on the report name > click 'Update file', in addition to the data model > choose file > click Apply

    I get the below error

    Bad request

    Your browser has requested that this server could not understand.


    Now, I could not download a new model of XML.


    I'm doing something wrong.


    Kind regards

    Kris

    user10163762 wrote:

    Thanks Eugen and Hussein.

    The problem is not with the template.

    It seems to be a problem in this particular case.

    Transferred to another instance.

    However once I run the program, I can't display the output as flashes and disappears from the window of the browser.

    My colleague says, it's to do with the trusted site to download something from the browser.

    Can you please guide me on how to solve this problem?

    http://bit.LY/1k8e2vi

    Thank you

    Hussein

  • BlackBerry Smartphones has tried to upgrade the OS to 4.5, now brick?

    Hi all! I'm new to BlackBerry devices, and last week, I bought a unlocked Curve 8320 from eBay. I really loved. I jumped ship from an iPhone because I was tired of not having certain characteristics. I came across an update for the OS version was 4.2. I wanted to go ahead and get upgraded to 4.5. I consider myself an advanced and proficient computer user. Currently, I use my MacBook, so I pulled up from Parallels and installed Vista on a virtual computer. I found an article on the upgrade and got the update 8320M_PBr4.5.0_rel108_PL2.7.0.78_A4.5.0.81_Rogers as my carrier is AT & T and the phone was originally locked to T-Mobile. I guess I didn't have the update from T-Mobile as I feared that could re - lock the phone (please, correct me if I'm wrong but, as I do not know this for sure). I have saved everything and began the process of update with Desktop Manager v4.6. Everything seemed to go well until the point that it seemed he was installing the new software.

    Now my BB is glued to a black and white screen, at the top "Platform BlackBerry 2.7.0.78" is written and there are some applications written in text just below. Address book, alarm, calculator, etc. If I try to click on one of them, I get an error or another. Desktop Manager is no longer able to recognize the device and MissingSync on OS X tries in vain to connect and synchronize with him.

    I have my iPhone to fall back on now, but anyone can guide the in how I could restore it to its previous state or get the DM to recognize if I can retry the upgrade?

    Hello and welcome to the Forums of Support BlackBerry.com.

    I didn't update from T-Mobile as I feared that could re - lock the phone (please, correct me if I'm wrong but, as I do not know this for sure).

    Who will be no way, once unlocked, always unlocked and nothing can change that. Similarly no matter WHICH carrier OS for THIS model will work, as long that delete you the vendor.xml file before the upgrade.

    Your BB is very probably not brick. First of all, I recommend unplug BB from USB and restart the Mac and then reconnect the BB to the USB port, then running Vista, reopen DM and see if you can log in again.

    If this isn't the case, I recommend that you find a friend with a PC.

Maybe you are looking for