Trying to do a pop up of a link to the column

Similar Questions

• The column as a link page window pop up instead of full page.

  I've set up a link in the column to pass some variables and see a good result as a page.
  
  I'd rather see this page appears like a window pop up, rather than as a page full screen. Where I can say my column link to view the page as a version that is smaller than the page full screen please?
  
  Thanks in advance!
  
  JMM.
  
  Published by: metropoj on November 16, 2010 10:43

  Hello, JMM,.

  Under the section "Column of link", you can set the target URL and set the URL (assuming that the link goes to page 1, defines a value for P1_ID and ID is a column on the report...)

  JavaScript:popupURL('f?p=&APP_ID.:1:&session.::&Debug.::P1_ID:#ID#')

  This will create a popup with a fixed width of 800 and a game of height fixed at 600.

  If you want to set the width and height then you can use...

  JavaScript:popUp2('f?p=&APP_ID.:1:&session.::&Debug.::P1_ID:#ID#',400,300)

  400 is the width and height 300

  Thank you
  Machaan

• How can I stop him adding that pop multiple bookmarks - up to fill the width of the screen?

  Whenever I try to add more than one link to my favourites, the pop-up that asks to add these links fills the width of the screen. It happens when I try to add all of the current tabs to Favorites, as well as when I use the add on, multi links. This makes it very difficult to add links because I have to go across the screen to find the ok button.

  I want to resize the pop up to a more manageable size. However, even though I should be able to resize, I can't figure out how. I also tried to minimize it, but the next time I tried to gather more bookmarks, it was back to the large size again.

  After validation, I tried once more to resize the pop-up. This time, it worked, and it seemed to stick. I think that I could have an add on (multi link). I thought I had tried resizing without which adds be on. I already knew that I was unable to use the search functions on different sites with the add on assets.

  So my problem has been resolved. Even if I don't know what caused the large size first.

• How to load firefox when I get this message of corrupted content error, the page you are trying to view cannot be shown because an error in the transmission of data.

  When I connect Firefox, it starts to load the page problem loading page and this message pops up error content corrupted

   The page you are trying to view cannot be shown because an error in the data transmission was detected.
  

  Same problem here. I don't see a fix listed on this site. If anyone has found a?

• Pop-up ads continue despite all the information here regarding remove them.  I think they were watching when I downloaded an update for Adobe Flash Player.  All of the suggestions!

  I use OS x El Capitan 10.11.2 on my 3.2 GHz, 8 GB Mac.  I keep getting the pop - ads that those scam ads reply and get their malicious software solution.  I also get the help line 'Apple' where someone's endearing supposedly walk me if they can help.  I tried all of the solutions in the Apple support groups, but nothing has worked... remove extensions (don't have), in order to put the files listed in 'Go to Folder' (none came, so I couldn't remove them).  Any ideas?  It seems that it got worse after I received a notice to update my Adobe Flash Player... maybe a false update.

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.7 ("Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, so any person with the required competence can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site of thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  Another indication that the test is safe in this threadand this onecan be found, for example, where the comment in which I suggested it was recommended by one of the specialists of the communityApple, as explained here.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy a particular line of text to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") The title of the page is 'Diagnostic Test'. Under the title is a text box, headed by three small icons. The right one represents a Clipboard. Click on this icon to select the text, then copy to the Clipboard of your computer by pressing Control-C key combination.

  If the text is not highlighted when you click the icon, select it in triple - click anywhere inside the box. Do not select the whole page, just the text in the box.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you see an error message in the Terminal as "Syntax error" or "Event not found", enter

  exec bash

  and press return. Then paste the script again.

  10. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  11. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appears. If you don't see it in about 15 minutes, the test probably won't be all within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something. If you close the window of the Terminal, while the test is still running, the partial results will not be saved and you have to start over.

  12. when the test is finished, or if you have stopped it because it was taking too long, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  13. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but what're told you to do maybe not. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  ______________________________________________________________

  Copyright © 2014, 2015 by Linc Davis. As the sole author of this work (including the "Test of diagnosis" referenced), I reserve all rights except as provided in the terms of use agreement for the site of Apple support communities ("CSA"). ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• Photoshop cs6 does not, on the contrary, I get a pop up window to subscribe to the complete composition of creative cloud

  Photoshop cs6 does not, on the contrary, I get a pop up window to subscribe to the complete composition of creative cloud.  I tried opening with its .exe file, go to Lightroom and opening an image from there. Without success.  The darn popup window just trying to sell me a subscription to the cc.  I'm desperate.  I need my old cs6.  someone know the answer

  I ran into this before. Click "buy this product" on the trial countdown screen.

  Identifies you if requested with your Adobe ID and password the cloud is an option for those who do not have a license serial number. It is not mandatory.

  Then, look for the option "I have a serial number.

  And from there and activate. Your trial period should convert Photoshop Standard or extended according to the serial number.

  If you still have problems made me know.

• I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said bark 2 hours and 7 minutes since last night.  What can I do?

  I tried to reinstall yosemite OX since yesterday after I wipe the drive and it froze.  It is said about '2 hours and 7 minutes' since last night.  What can I do?

  Try to turn off the computer with the power switch, and then restart.

• my calendar has frozen after trying to move a clip in e-mail by using the calendar; still frozen after that force them to leave

  my calendar has frozen after trying to drag and drop a piece of mail to the calendar; still frozen after forcing them to leave... using OS X v 10.9.5

  Get the error that civilian could not be refreshed... requires a force quit and then when reopened, get the same message

  Try restarting your Mac in safe mode:

  -Stop your Mac

  -Wait until your computer turns off and after that press the power button

  -Just after you hear the startup tone, press in and hold the SHIFT key

  -Release the SHIFT key when you see a gray Apple sign and the progress under this sign bar

  -Once you see office, start a scan Disk Utility to detect and repair file system errors (remember to choose your primary hard drive)

  -Click on the disc to check, then, if requested to solve the problems on the repair disk

  -After that click on verify disk permissions, and then click Repair disk permissions

  -Once the process is complete, stop your Mac and turn it on again after 30 seconds

  I hope this helps!

• my user name and password are saved on my webmail site. How can I remove them so they don't pop up when I go on the site?

  my user name and password are saved on my webmail site. How can I remove them so they don't pop up when I go on the site? I use cox.net webmail. Cox tell me it's a firefox issue. So, here I am. Can you help me?

  Hey, Julien

  Go to Tools-> options and on the Security tab click on passwords saved. This will give you a list of sites that you have saved a password. Just found your site and delete this entry.

  There are a lot of useful information in this article on the Firefox Password Manager. He should answer any other questions you might have.

  You can also delete cookies from this site in order to make the site you not forget if you have created a remember me cookie.

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Hope this helps!

• I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is on

  I have a late 2009 iMac. When I tried to upgrade to El Capitan. He said that the CHIP shows the h/d is a failure and can not be updated. I have install an external withEl of h/d Cap but it is very slow. the h/d is USB 3 but the iMac's USB 2. the h/d is only 5400 RPM. a 7200 RPM 7 / would accelerate the iMac?

  No, because the limiting factor is the computer is USB 2.0, which is how it connects any external drive apart the external drive. As USB 2.0 is much slower, there is no real advantage to a 7200 RPM drive. What you need is a Firewire enclosure that supports FW800 which is much faster than USB 2.0.

• lately and I don't know why I see a pop up of a problem with the script. can some1 help me?

  There is a pop up of a problem with the script. He asked end and contuniue the script. I didn't have this problem before. Please help me this is getting really annoying. He asks a lot

  I changed a theme and almost never have a problem again...

• Toshiba 42VL963 - no pop up in films in 3D, the 3D effects

  Hello world

  I just recently bought the Toshiba 42VL963 and I am happy with my choice, but I have a problem.

  3D movies that have scenes 'pop out' does not seem to show, on the other hand, I have a lot of depth (on the inside of the tv) scenes.

  I just want to know if it's the limit of the tv or maybe the glasses are not the best, or there will be improvements in the future... like adding a depth control
  Is there a difference between passive vs active solution about the 3d pop up scenes?

  By the way, I see there is a setting of depth but only for 2d - 3d conversion, why only for this?

  I'm sorry for my bad English, I'm from Romania

  Hello

  3D effects depends mainly on 3D content.
  I have a 3D TV and I looked at a lot of different 3D content and I have to say that any single 3D movie appears differently. In addition the 3D BD player can affect the 3D effects too.

  Have a look here:
  http://www.YouTube.com/watch?v=FSGfN9rr78Q

  This video of youtube 3D provides really goo out pop effect is recommended to check this with your TV.

• I tried to update iTunes on Windows 10, now, I get the error "there is a problem with this Windows Installer Package".

  Hello

  I tried to update iTunes on Windows 10 and now I get the message error "there is a problem with this Windows Installer Package".
  I tried to fix it too, but it has not helped, so I uninstalled and tried to reinstall but there has not helped either. I tried almost everything I've seen in other posts.
  I use a laptop Asus series k55VJ with an original copy of Windows and has never had this problem before.

  Any of you have an idea what can do?
  Thank you!

  Try to repair the Apple Software Update of the programs and features Control Panel, then uninstall it and then reinstall iTunes.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  TT2

• Months ago, I changed my ID apple and all of a sudden I was pop ups on my iphone for the confirmation of my old apple ID which is no longer even exists, my iphone allow myself to use my new apple ID to update or download anything.

  Months ago, I changed my ID apple and all of a sudden I was pop ups on my iphone for the confirmation of my old apple ID which is no longer even exists, my iphone allow myself to use my new apple ID to update or download anything. It has frankly become a nuisance is going on and I've recently updated my iphone to ios 9.3 and I can not even in my phone because he wants my old apple ID that doesn't even exist, please someone help.

  If iCloud asks you the password to your Apple ID - Apple Support previous

• pop up when I turn on the top of the Tower

  c:\users\susan\appdata\local\temp\ct3153924\plugins\tbverifier.Dil this pop-up comes up when I turn on the laptop that says it can't be found.   I have a hp Pavilion dv7-6c43cl entertainment pc.  It has windows 7.

  Hello

  The return of the pop ups is not good.

  The programs AdwCleaner and Junkware cleaner becomes obsolete over time. HitmanPro and MBAM update.

  Let me know if you have the time and if you are ready to troubleshoot this yet and if you have time - I can check it for you. You can also send me a private message:

  http://h30434.www3.HP.com/T5/first-time-here-learn-how-to-post-and-more/how-to-send-A-private-message-video/TD-p/842013

  suz60 wrote:
  

  2 other pop ups came when I turned the computer back on today.  I went through the same process and they are gone.  I have to leave the programs downloaded to my computer or if they become obsolete?  I've heard too many antispyware programs cause the computer becomes slow.