Automatically use the wired on wireless LAN connection when using the docking station

Similar Questions

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• Latutude E6510 slow wireless in the docking station

  I have a Latitude E6510, which is connected via a wireless network. The signal is excellent also well anchored and detached but when my drops of internet speed 386 kbps using Speekeasy test alongside speed unless. Disconnected I have a speed of 15 MB. Someone at - it this same problem? I moved to the docking station right next to the wireless router but still the same issue.

  Workaround for me on this was to leave laptop screen / lid open docked. Speed increased with him open.

• Qosmio G30-161: can I use the Docking Station?

  Is there a docking station that I can use with my G30? I'm looking for something that will have USB, network and monitor connection to perform docking the G30 on my desk a faster and easier connection (more connection a load of cables each time)?

  Thank you

  Phil

  Hello

  No, it is certainly not possible to use a docking station or APR on the Qosmio unit.
  The unit should have a docking in slot at the bottom but the Qosmio hasn t he.

• Tecra M5 - crashes when you use the docking station - fan at full power but no start the thread

  Hi all

  As I say, I have intermittent problems where the machine crashes when you use the docking station. Sometimes at the beginning of the startup of windows then stalls and powers of fan at full power. If I take off the base of the machine, it works fine.

  I bought this machine because I had one in my previous job and he had found great. However, my only previous also had this problem sometimes when lashing...

  Any assistance received very warmly.

  Thank you!

  Hello

  Stand by. You have noticed this behavior when the laptop is OFF, connect to the docking station and after doing this you turn. Am wrong me or have I misunderstood something?

  Maybe's external screen connected to the docking station?

• Elitebook 6930p Wireless does not work then in the docking station

  Elitebook 6930p Wireless does not work then in the docking station, no idea how to fix this? It worked, then I got a soft image, not its broken.

  Visit this link

  WINDOWS XP - network connection turn off/on docking station

• Venue 11 keyboard connected to the docking station

  The place of meetings 11 keyboards can communicate with the Tablet when it is in the docking station?

  With the way the place of sessions 11 is in the docking station, it would be quite difficult to have a connected keyboard because he wouldn't level with your office.  If you use the docking station, shouldn't you already have an existing configuration of the Office you can take the keyboard and mouse of?

• sound on laptop lost when it is connected to the docking station

  laptop connected to the docking station and audio comes through the audio connection [headphones] on docking station.  No sound on computer

  Hello

  ·         If it works well before? If so, remember to do recent changes on the computer before this problem?

  When you connect the laptop to the docking station, the default audio output device will automatically change to the docking station. Similarly, in the case of plug in the headphones on laptop. I suggest you to check if the audio device by default from computer speakers is properly defined. Follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click sound.

  b. click the read tab make sure that the correct default audio device is selected. (For most users, the default audio device is pregnant.)

  c. If your default device is not set to the right audio device, on the read tab, select the appropriate device, click Properties, click the Advanced tab and make sure that the default Format is set to the value you expect. When you are finished, click OK.

  d. on the read tab, select the playback device, click set upand make sure that the configurations are set correctly.

  If the sound settings are set correctly and that your speakers are already set as default device, go to "Check if an audio driver is installed" now.

  e. Select the audio device you want as audio device by default, and then click set as default.

  f. click OK to save your settings.

  For your reference, follow the steps described in the following link:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

• Two external monitors can be connected to the docking station?

  Is it possible to connect two external monitors to a docking of HP 2740? If so, how it is with 1 single VGA port on the docking station. The tablet which is embodied is a HP Elitebook 2760P.

  Yes, you got that right.

  He landed again until what's available / condition on the 2nd external monitor. These days most of them VGA, HDMI and DVI while that few of them have display port too.

• No bass when you use the docking station to not probe

  When I use the out port of my docking station (Series edited by moderator) I get no bass sound, just hail my wide range speaker. When the speakers are plugged into the headphone jack directly on the laptop it normal sound, with a full range of sounds. I checked the setting in the CP of its speakers are identified as the range, so this isn't the issue. There is no sound improvement enabled in Control Panel SRS. I'm puzzled. Why no bass when you use the docking station only. I tried two different docking stations with the same result: no bass.

  

  Yes! I finally solved it on my system:

  • Go to the control panel
  • Choose the material and audio

  or simply to display all Control Panel items

  • Select SRS Premium Sound Pro (it's an icon of circle blue/white)
  • Wait for the program to come black EQ
  • Select the tab/words "listening experience" near the top of the window of SRS Premium Sound PRO
  • Uncheck the 'improvement of Audio '.

  Fact

  In addition, there is the graphic equalizer in there that totally works well to further fine tune your desired speaker and the audio preference.

  

• Ports of billing to the USE of the docking station does not

  I have a tablet of w700 acer iconia, the usb port on works actually compressed, but the usb three extra ports on the docking station do not work. How can I solve this problem?

  You have the power connected to the dock?  The USB ports on the dock will only work if the power is connected.  (If this isn't the problem, you can have a defective dock).

• My mouse pointer moves in the opposite direction, I intend when I use the touchpad on my laptop. It works fine when I use my docking station and external mouse. How can I fix it?

  I'm using Windows Vista with a Sony Vaio laptop.  At the office, I have a docking station with keyboard and external mouse.  Everything works fine with this Setup.  But when I unplug the docking station and use the touchpad on the laptop, my mouse pointer moves in the opposite direction, that is my intention.  I move my finger and the pointer down.  I move to the right and the pointer goes left.  How can I fix?

  Go to start /Control Panel, and then double-click the icon '' mouse. '' When this window opens, select the tab "Touch Pad" at the top. There's a box near the bottom called "Touch sensitivity", click on that. Change the settings a little bit lower than what they are currently at.

• Satellite Pro A120: Is it possible to use the docking station parallal port

  Is it possible to use a docking station usb with a parallel port on a satellite Pro A120, which has no parallel port.

  Therre is a BIOS setting, or is it not supported?

  Hello

  What USB docking station do you mean exactly?
  I found a camera and it seems that it s compatible with all satellite units.

  But please post one exactly USB docking station number.

• T410 does not connect to the docking station

  I have a Lenovo T410 and a docking station 4338. When I tried to join the computer to the docking station last night, he would not go. I don't see any obstruction or something wrong with the plug on each unit; the computer can't accumulate up as before.

  I have another station host I can try, which should help to determine which device is the problem, but I won't have access to him until next week.

  Have someone has encountered a problem like this? Any suggestions to correct?

  I compared the two docking stations and identified the problem. There are two plastic hooks built into the base, one to the right of the connector, one left and below. In a station works correctly these hooks are discarded because the computer is inserted, then spring back, now in place.

  On my post of malfunction the hooks were stuck, prevent the computer from insertion.

  I was able to fix the problem by pushing hooks with my finger, which take them off. If they stick once again I can try a Lube graphite.

• Tecra M11 - 17V - identify the serial port on the docking station

  I have a laptop Toshiba Tecra M11 - 17V, which I often use with the docking station that accompanies it.
  There is a DB9 serial port at the back of the docking station, but I don't know what COM Port.

  I use Windows 7.

  In the device, COM9 Manager - COM22 are identified as Port BT (bluetooth). Com7 - COM8 are RIM Virtual Serial Port v2, COM17 is Prolific USB-to-Serial Comm Port and COM18 is USB-Serial CH340.

  I thought that COM17 or COM18 were the most likely candidates, but have not been able to get to answer using one of them.

  I connect a Psion 5 (Comms app) to him and have developed ports and the Psion 8bits, 19200 baud, no parity, 1 stop bit.

  Hello

  > There is a serial port DB9 on the back of the docking station, but I don't know what COM Port, it is

  I think you have misunderstood something wrong
  COM ports in Device Manager are virtual com ports
  There is no link between a serial port and a virtual com port.

  I have a question: what docking station you have exactly?

  I had an express port replicator and this device required an additional serial port driver installation.