XP installation fails the manifest parser error: installation fails in i386\asms\6000\msft\windows\common\controls\control.man on line 0

Similar Questions

• I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message: "syntax error:"D:\I386\asms\10\MSFT\WINDOWS\GDIPLUS\GDIPLUS. " MAN. "

  I install windows xp on a sony laptop. I created a new formatted partition but I get a fatal error message.  one of the components that windows needs to continue Setup could not be installed. Manifest Parse Error: an invalid character was found in text content. Connect the system configuration error: SXS. DLL:syntax error in manifest or policy file "D:\I386\asms\10\MSFT\WINDOWS\GDIPLUS\GDIPLUS. MAN 'at line 0. I bought the oem software installation disc. I bought the computer used and did not get any disk with it. Help, please

  1 person got this response
  Shawn thought it was bad media so I'm a new disc and received the same error does anyone have an idea what might cause this error?

  original title: install windows xp

  Hi sptusch,

  Thanks for posting. Is it a burned disc? If this is you please redownload the image. Also, try the following.

  1. place your Windows XP installation CD and start to her...
  2. Press any button to start the Windows installation (don't worry... we do not actually use the installer at this point)
  3. wait a few moments for the installation program starts, when you see repair an installation of Windows XP using the Recovery Console, and then press the R key
  4. wait until you see this screen, enter the number of your master installation. (Typically 1 to C:\Windows)
  5. press ENTER.
  6. If you are prompted to do so, enter your administrator password. If you don't have one, leave the field blank and press to enter.
  7. from the command prompt, type: chkdsk/r (note the space between chkdsk and / r)
  Allow it to complete undisturbed.
  8. remove the disc, then restart.

  I hope this helps!
  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• I'm moving to Windows XP, Vista, I got an error stating - Int failed: E:\i386\asms

  E:\i386\asms. error
  
  

  I'm moving to Windows XP, Vista, I got an error stating - Int failed: E:\i386\asms. and told me I/O device missing and do anythging else used.

  Hello
  Unfortunately, it seems that you are using the Windows XP CD is corrupt and therefore unusable for installation.  Please see: How to replace lost Microsoft software
  Kind regards
  Chauvet J.

• switch from vista to xp - Int failed: E:\i386\asms.

  I'm trying to switch back to Windows XP, Vista. I had to send my laptop in for repair and they loaded Vista on it because that's what was on this subject during the purchase. I bought this from a company that had upgraded to XP, which I like much better. I got an error stating - Int failed: E:\i386\asms.   He also tells me that I'm missing some files - xmlp-*-xdr. Don't know what that means. As I load the CD for XP he showed some files would not be responsible and gave me the the ability to jump, which I did because it would'nt I would try again. They finished with xmp. Anyone got the answers or help for me? I cannot get my laptop to start because of this and don't know what to do?
  Thanks in advance!
  Dee

  Unfortunately, it seems that you are using the Windows XP CD is corrupt and therefore unusable for installation.  Please see: How to replace lost Microsoft software

• I get random failures to load a page with the XML parsing error: entity not defined using firefox 4

  This didn't happen with the version 3 x, nor with the previous v4. Using the arrow to the left and clicking on the previous page request usually works ok. It happens several times a day. Full error is

  XML parsing error: undefined entity
  Location: jar:jar:file:///C:/Documents%20and%20Settings/shirley/Application%20Data/Mozilla/Firefox/Profiles/4txi20jj.default/extensions/ [email protected]! /chrome/bandwidthmeter.jar!/content/netError.XHTML

  392, column 33 line number:

  & netOffline.longDesc;

  I am also getting this error and have been able to understand that its caused by the Bandwidth_Meter_and_Diagnostics - 1.2.5.xpi. This deactivation seems to have stopped the error, but is a major nuisance.

• The XML parser error when you set the NTP in UCS Server

  When you try to configure NTP servers (using IP addresses) when http would be in UCS C220 servers, received an XML parser error and NTP server configuration did not.  Ideas?

  Hey John,

  You can set the NTP CLI/SSH servers to host?

  -Wes

• Error message when opened in the browser - parse error?

  I'm having this problem when I use the image upload server behavior in my PHP file.  Does anyone have an explanation of this error when I open it in a browser?

  There is also a red exclamation mark next to the server behavior.  Is there a place in Dreamweaver that tells me where the error occurs (in Flash)?

  Parse error: syntax error, unexpected $end in... .line 308

  Thanks for your help!

  Balance braces woudn't fix. It's actually a rather obscure PHP function that triggers an error, even if the code is technically correct. Before dealing with that, you download twice form on your page, once in the wrong place and at the right place.

  You must remove the form located on lines 2-25.

  What causes the parse error is how the loop in the dynamic form was built. Change the code at the bottom of the form that is in the body of the page like this:

    /*start dynamic form*/
    for($x=0;$x<$inputfiles;$x++){
      echo "
      
  ";
    } /*end dynamic form*/ ?>
  

  The problem was that the loop is contained in the HTML code. Normally, it's not a problem, but the PHP parser has been offended and decided to not play ball. Remove the HTML code and using echo to display it, solves the problem.

  I can't comment on the question of whether the rest of the code is OK. You should check with the person who creates the code for you. But the error has been resolved.

• Error Code 0xC00CE56D the Config parser error

  I get this error error Framework/v.1.1.4322/config/machine.config of C:/Windows/Microsoft.Net Analyzer Config parser returned the error of analysis

  0XC00CE56D it comes from start to appear? What are my corrections?

  Hello

  1. have you made changes on the computer before this problem?
  2. when exactly you get this error message?
  3. What is the exact error message?

  Answering these questions could help us help you better.

• Windows xp sp3 system root of the Hal.dll error or not found after auto update of windows system corrupt does not load.

  12/07/2011 my system automatically downloaded a system update and rebooted when it restarted, it wouldn't load windows and gave this error message. What should I do? I tried to remove the hard drive and put it on another computer if I could look at the problem but I don't know what to do to fix. My backup information are on another hard drive in the original computer. I use Norton 360 for my backups.

  It is extremely unlikely, there is nothing wrong with your file hal.dll despite what says the error message (do not try to replace).

  It is extremely likely that XP just cannot find the fine hal.dll where it says to look for.

  XP is maybe not able to find the file, it's file system is corrupted (Norton that sometimes), or if your c:\boot.ini has somehow become corrupted and told XP to find files in never never land.

  You must first run a chkdsk /r on your distressed HARD drive and if that does not do it, you have to redefine your boot.ini file.

  If you have the drive in another machine, you can open the file c:\boot.ini with a text editor and copy/paste the content back here for analysis.

  You can also rename your file c:\boot.ini to something like c:\boot.ini.bak (so now you do not).  In a single partition installation, XP is not even a file c:\boot.ini to start.  He'll complain briefly, but always begin (unbelievers - try it).

  t can take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  I'll keep an eye on your Norton since when your charge again, Norton System may corrupt your file system again and you will have to repeat the chkdsk/r to repair (so you can set Norton).

  I put the drive in the original system and fix it there with the XP Recovery Console.  After all, it's where he has to work, right?

  If you have any bootable XP installation CD authentic where you can start the XP Recovery CD of Console, you can make a bootable CD from the Console of the Recovery XP (no XP media required).

• The message says the inconsistency in the data base of the installer and the installation fails. The summary of errors not display any errors. How to install LR?

  Message on the notification window "Inconsistency in the database of the installation program"and the installation fails. The summary of errors not display any errors. How LR to install?

  HI Pauld48784098,

  It will help us solve your problem if you can provide additional information. What version of Lightroom are you trying to install and what is your OS?

  In the meantime, this discussion forum, in which a user has experienced a similar problem, can help: "Inconsistency in the database of the installation program".

  Best,

  Del

• XML parsing error. no evidence that that is line 1 during the installation of the audio bible Download Manager

  I try to install the Download Manager audio bible, when this error screen appears.

  XML parsing error. any element that is on line 1

  Hello

  1 did you change on your computer before this problem?

  2. what operating system is installed on your computer?

  What version of the operating system Windows am I running?

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  3. are you using Internet Explorer? If Yes, what version of IE are you using?

  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows7/find-out-which-version-of-Internet-Explorer-youre-using

  I would say download you the application and install it again and then check.

• On the tray upward. error when installing the shared technologies. Then it cancels the installation.

  On the tray upward. error when installing the shared technologies. Then it cancels the installation. Download, installation, setting up

  Photoshop elements 12 fails when installing sh... | Adobe community

• During the installation of Windows, shows that an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  An error internal occureed in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  original title: an internal error occurred in the initialization stage. The application could not be loaded. Please contact the vendor of the application. Error n ° 302

  Hello Stephen,
  try to run the "Startup Repair" utility located on your installation DVD.
  hope this helps
  Eddie B.

• «Error 1721.There is a problem with this Windows Installer...» "during the installation of Pinnacle Studio 12

  I m PARDEEP SEHGAL of INDIA sir, I tried to install the software of PINALCE STUDIO 12 but despite several attempts, the software could not be installed in Windows XP service pack 2 but version to error message repeated as "error 1721.There is a problem with this Windows Installer package. A program required for this install to complete could not be run. Contact your provider to support personal or package. Action: PCLE_StudioInit, location: C:-... \Studio.exe, command: /init 'could someone help me out here.

  Hello

  Try the following methods.

  Method 1:

  Download and install the latest Windows install http://www.microsoft.com/download/en/details.aspx?id=8483

  Download WindowsXP-KB942288-v3 - x 86 .exe for Windows XP.

  Method 2:

  Register Windows Installer service; To do this, you need boot mode safe.

  1 restart your computer and press F8 several times before the Windows Logo appears and select Safe Mode and press enter

  2 - log on your user account (must be administrator).

  3 - Click Start, and then select 'Run' or Win Key + R to open the "Run".

  4 - Type cmd and press enter

  5 - in prompt type command sequence,

  msiexec /Unregister and press enter

  msiexec/regserver and press enter

  Close cmd and boot as usual and check the installation.

  Method 3: Run System File Checker

  1-click Start > all programs > Accessories > right click on cmd, select 'Run as administrator'

  2 type the following commands

  sfc /purgecache and press enter and you may be prompted to insert your Windows XP CD-ROM. CD Once completed, you will receive this message Windows File Protection has managed change.

  After this, type this sfc/scannow and press enter and you may be prompted to insert you CD Windows XP CD. This can take some time to check.

  I hope this helps.

• Trouble installing the 2011 E - tax to the ATO. Error "installation package could not be opened, contact the seller to check if this is a valid windows installer package".

  Trouble installing the 2011 E - tax of the ATO

  Error message "installation package could not be opened, contact the seller to check if this is a valid windows installer package."  Help!

  Hi there, do the right click Save target thing. And make sure u save it somewhere other than your desktop for example: my documents - for me, this has solved the problems