testand returns fail path in Windows 7

Similar Questions

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• How can I return the path of a test step VI in LabVIEW?

  I would create a VI that will return all of the VI paths that are associated with the test steps in a TestStand sequence.  How can I return the path of the VI associated with a test step?  Here is a starting point that will return the first step of the sequence.

  

  You must convert the Module to a LabVIEWModule (use the variant to the data node), then you can use LabVIEWModule.VIPath.  If you use TestStand 2010, you can call LabVIEWModule.GetVIAbsolutePath to find the VI in the case you are calling with a project.

• my computer can't find the path for windows install what I do to get it back

  whenever I restart my computer, a box appears saying: it can not find the path for windows install and the box comes back to how to fix this

  Hi Billy,

  Try a clean boot (Vista and W7) http://support.microsoft.com/kb/929135. If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem. Follow the procedures described in the article. Once found, remove, delete, disable or uninstall. Once don't forget to reset your system back to the normal state, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work. If you are using XP, see http://support.microsoft.com/kb/310353 and http://support.microsoft.com/kb/316434.

  I hope this helps.

  Good luck!

• Could not open the zone alarm file:Validation failed for c\windows\system32\zpeng25.dll.

  All of a sudden I can't activate my zone alarm service, because I gives me a message that the Validation failed for c\windows\system32\zpeng25.dll.  After you receive this message, I ran software to fix registry errors, but that has not fixed the problem.  I am able to follow the explicit instructions so careful instructions are given.  Thank you for your help.

  Do Zone Alarm support say when contact you? What responses did you get when you posted in their forums?
  http://forums.ZoneAlarm.com/index.php

• Failed to logon Windows 7 administrator. "User profile Service service has no logon. User profile cannot be loaded. »

  Failed to logon Windows 7 administrator. "User profile Service service has no logon. User profile cannot be loaded. "How can I recover my administrator privileges and solve this problem.

  Hello
   
  I suggest you for this visit provided Microsoft article below.
   
  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.
   
  http://support.Microsoft.com/kb/947215
   
  Also I suggest you to activate the administrator account by default on your computer from WinRE and see if the problem is resolved.
   
  You must have the Windows 7 DVD, start the computer to Win from the elevated command prompt, you can follow these steps:
   
  (1) use the Windows 7 DVD to start the computer from Windows Recovery (WinRE).
  (2) in WinRE, open a command prompt. To do this, follow these steps:
  On the screen to install Windows, select the appropriate language to install, time and
  currency format and keyboard or input method options and then click Next.
  (3) click on repair your computer.
  4) click 7 installation you want to repair, and then click Next.
  5) click on command prompt.
  At the command prompt, type the following command and press ENTER:
  lusrmgr.msc in the online search and press enter
  NOTE: This file is located in C:\Windows\System32\lusrmgr.msc
  1. open the User Manager and local groups.
  2. in the left pane, click the users folder.
  3. in the middle pane, right click Administrator, and then click Properties.
  4. to activate the account administrator of Buit-in-
  (a) clear the account is disabled box.
  (b) proceed to step 6.
  5. to deactivate the account administrator of Buit-in-
  (a) check the account is disabled box.
  6. click on OK.
  7. close the windows local users and groups.
  8. close the session, and you will now see the built-in Administrator account log additional icon (active) or removed (disabled) to the log on screen.
   
  NOTE: Click on the Administrator icon to open a session the built-in Administrator account.
   
  Now of the foregoing provided steps that you need to check if you are able to solve the problem, if you are able to resolve the problem with the default Administrator account, then you must follow the step provided to create a new user account and check the question below.
   
  Create a new user profile.
   
  You must create a new user account and check the question of do you need to follow the steps below.
  Open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and family safety, then clicking on user accounts.
  Click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Click on create a new account.
  Type the name you want to assign to the user account, click an account type, and then click on create an account.

  Look for the question, for additional on this issue references, you can consult the forum link provided below.
   
  IF you still face the question, then you can follow the link provided below to fix the damaged user profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Thank you, and in what concerns:

  I. Suuresh Kumar-Microsoft Support.

  Visit our Microsoft answers feedback Forumand let us know what you think.

• The unwanted invite repetitive: a program that is running on this computer tries to display a message to alert the program path: C:\Windows\system32\MsiExec.exe

  I get this message and can't find a way to stop it. A program that is running on this computer is trying to display a message

  The alert program path: C:\Windows\system32\MsiExec.exe the Player version you want to install is less than what is installed.

  Any Suggestions

  Thank you

  Peter

  I also get it exactly the same problem. Started about 2 weeks ago. Trouubleshooting now... I'll post what I find.

  Thank you. A question, how to deal with "" the version of the player you want to install is less than what is installed.? "" This will go away on its own?

  Thank you

  Peter

  Peter-try completely remove Adobe Flash Player, and then reinstall. I did this on my machine and will need to see in the next few days if this has worked for me or not because I don't know how to manually recreate the guest. Best of luck and post back how it goes!

  Here are the instructions for uninstalling Adobe:

  https://helpx.Adobe.com/Flash-Player/KB/uninstall-Flash-Player-Windows.html

  Reinstall: https://helpx.adobe.com/flash-player.html

• Program path: c:\windows\system32\audiodg.exe, HELP the cpu at least 99%

  Program path: c:\windows\system32\audiodg.exe, HELP the cpu at least 99%

  Hello

  Method 1: I suggest you put the computer to boot is a way to determine what's asked the origin of the problem:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to configure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2: You can also try the steps in the link and check if it helps:

  A problem with leaks memory occurs in the Audiodg.exe process when you play audio on a computer that is running Windows 7, Windows Server 2008 R2, Windows Vista or Windows Server 2008

  http://support.Microsoft.com/kb/981013

  Important

  This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

• Windows 7 returns to base at Windows startup

  When I start my computer, he decided to return to base at Windows startup

  Its happened a few times already and still a system restore works. But is there anyway to stop this?
  Its getting boring and the restoration of the system is a real problem.
  The text becomes all weird and when I move windows autour, there is a gray box from where they used to be.
  Thank you

  Try disabling startup programs to see if one of them is to disable the Aero effects.

  See also: http://support.microsoft.com/kb/331796 (clean boot)

• Why fail netplwiz in Windows 2008 server?

  Why fail netplwiz in Windows 2008 server?
  "AutoAdminLogon" = "1".
  "DefaultUserName"="Administrator".
  What else?
  What a complete registry keys for the automatic registration of the user list?
  On any resource, I saw the article, but I lost.

  This forum supports the users Windows issues or security problems.  You'll find the Windows Sever experts above in the Windows Server forums:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port.

  Huawei Mobile Connect - 3G modem failed to install Windows 7 on USB 3 port. I looked for the answers here and I can not find my problem even for questions answered with Dibcom TV Tunder device since I can't find this device in my laptop. He is able to install and operate in another laptop running Windows XP. Been tried to uninstall and reinstall more than 5 times and he continues to meet with even has no message and I even downloaded the latest drivers from the local Web of ISP site. Helpdesk of mcafee and contacted microsoft, but they are not able to solve my problem.

  Thank you.

  Managed to solve by referring to the answer below posted by Rudolph_DT asked on thread

  Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  Thank you.

• Error database that can be updated windows found 0 x 80070490. access to the path "C:\windows\softwaredistribution" is denied. »

  Original title: error in database that can be updated windows found 0 x 80070490

  When you try to repair windows update on my rt surface I get the following error message - "error in database that can be updated windows found 0 x 80070490.  repair windows update the database, access to the path "C:\windows\softwaredistribution" is denied. "Any help?

  Hello

  Welcome to the Microsoft community.

  It seems that you are facing problems trying to fix Windows update. We're here to help. It would be great if you can answer the following questions:

  1 have had any changes made on the computer before the show?

  2. Why are you trying to repair Windows update? Are you facing problems during the installation of the updates?

  To resolve this issue, follow these methods:

  Method 1:

  I suggest you follow these steps to run the Windows update Troubleshooter:

  a. open Control Panel.

  b. click on Troubleshooting.

  c. click show all in the left pane of the screen.

  d. in the list of options, click Windows update.

  e. click Next and follow the on-screen instructions.

  Method 2:

  I suggest to refer to the article and try to run the system update readiness tool:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  If you are always faced with the question, please answer and we will be happy to help you.

  Thank you.

• Each installation of the PATCH fails after installing Windows updates

  Hello

  I would like to report a problem, I think it's a bug of Windows introduced by one of the Windows updates (unfortunately I could not know who of them).

  Here's the test scenario:
  1. install a fresh copy of Windows on a test computer
  2. install all the Windows updates available (so the system is up-to-date)
  3. create a sample MSI installer that installs only some dummy files (let's say Product Version 1.0.0) and host on a web server

  4. install the MSI from the online location using a command line like this:

  msiexec /i http://server/share/package.msi

  5. create a. Patch MSP (e.g. v1.0.1) which only adds a new file to v1.0.0
  6 install the patch v1.0.1

  RESULT: the installation of the patch fails with the following error message: "the file name, directory name or volume label syntax is incorrect."

  NOTES:
  1. the question has replicated to Windows 7 and 8 machines updated
  2. the question is not replicated on a new install of Windows without updates applied

  Is anyone aware of what may cause this error? Once again the patch installation fails only on Windows computers with the latest updates installed.

  THX,

  Daniel

  Hello Daniel,.

  Thanks for posting in the Microsoft Community.

  I suggest you post your question in the MSDN forums:

  Check out the link:

  https://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information is useful. Please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• How to set the java path on windows 8

  How to set the java path on windows 8

  Original title: Java

  Way easier access and the value of your PATH environment variable is as follows:

  1. Press + W to display the search settings panel
  2. Type "path".
  3. Choose "edit the system environment variables.

• Installation of updates Windows comes to approximately 96% complete, then said: "failed to update Windows, restore configuration changes.

  I just bought an Acer Aspire 5600U all-in-one computer. When attempting to install Windows updates, sometimes about 96% complete, then said: "failed to update Windows, restore configuration changes. How to solve this problem?

  Original title: Windows updates

  Hello

  Please, try to reset components Windows Update as mentioned here and see if this helps:
  http://www.kapilarya.com/fix-error-80070570-Windows-Update-encountered-an-unknown-error-some-updates-were-not-installed
  Hope this helps, good luck :)