Trying to get back to the factory State but in error (disabled: recovery partition is deleted)

Similar Questions

• Aspire E-531 boots but Windows 8 will not load. I need to get back to the factory settings

  I don't have the D2D option in BIOS > hand - so I can't activate it :-)

  and go to F10 when booting has no effect.

  When I look at the disk (on the computer) I see drives C: and RECOVERY (Y)

  so I was wondering what to do next?

  Thanks, I tried this method of "brute force" by running GParted - but there is 'no screen available' when GParted loaded (!), so I couldn't go any further

  However trying the different (Legacy vs UEFI) BIOS settings I had the D2D option to appear.

  After you have enabled the option and AltF10 I entered a custom screen set - must be the entity "Windows Boot Manager" with - and I have the options to restore the computer. FACT!

  My first brush with UEFI... Thank you

• TV - how to get back to the factory store?

  I need to restore/recover my StorE TV 1 TB Media Player.

  Attached is my very sorry story...

  My stepson has borrowed, this device and used as an external HARD drive, to get the games, his friends - inevitably, he has also acquired a mass of viruses ' are on the device.

  His quick fix, was to format and possibly the the device partion. Needless to say that the unit no longer works, which is more annoying for me and his mother, in particular.

  Is there some way I can restore/recover the software for this device, so that it can work as expected.

  Any help in this regard would be greatly appreciated.

  Not sure if this package might be useful but check it out.

  http://www.filedropper.com/storetvdefaultfacturysettings2tb

  It s zipped structure to store TV folders and files located on the HARD disk.

• Trying to get rid of the annoying pop up, I chose deny full screen and "remember" in You Tube and cannot get full screen anywhere or change it back. How?

  I tried to get rid of the annoying pop up on You Tube and in frustration, I chose the refusal full screen and "remember" and now cannot get full screen anywhere or change it back. How do I do that? I read the thread here with the same problem and the solution included hit ' command + I "and so on. How do I do that? What is 'Order' and the letter 'i' or 'L' or the number "!"?

  You can control and manage permissions for the domain in the tab currently selected through these steps:

  • Click the address bar onthe Site identity button"(globe/lock)
  • Click on 'More information' to open ' tools > Page Info "with the Security tab is selected
  • Go to the permissions tab (Tools > Page Info > permissions) to check the permissions for the domain in the currently selected tab

• Im trying to buy photoshop but it keeps saying that its not available in my area. I am in the United States and in my area gets bad! I even updated to the United States, but it is not record the change!

  Im trying to buy photoshop but it keeps saying that its not available in my area. I am in the United States and in my area gets bad! I even updated to the United States, but it is not record the change!

  Hi Mariam,

  It seems that your ID Adobe was initially registered in Pakistan due to which it is not allowing you to make purchases in the United States.

  You can create a new Adobe ID, register in the United States and then it should allow you to make a purchase.

  Let us know if it works or not.

  Thank you

  Yann Arora

• What is the best way to get back to the basics with apple products

  I have four devices apple, IMac, IPad, iPhone 4 s & a Mac Book Pro.

  I have problems to understand all of these devices in one way or another that I just are not / can not understand the jargon associated with trying to use to update or modify my needs.

  For example the iMac that I bought at the beginning of the year, I have a separate hard drive, I realized is not password protected, I downloaded the software of Lacie hard drive manufacturing, but I do not see that it works or what to expect, I thought that to have access, you will put in a password like I do when I turn on the iMac not so simple & I lost a whole day on this & finished frustrated as no further, this is the case every time.

  I need some tips on where to start because I don't have anyone to ask what do I escaped my way through.

  I think I need to get back to the basics & get a form any order that these devices are all different but have a purpose.

  Can someone advise on where I should start it please.

  iPhone iOS 7.1.

  iPad iOS 9.2.

  Book of Mac Pro OS X 10.9, Mavericks (I think)

  IMac Yosemite 10.10

  The most important thing you can have right now are backups of your important data.   Which is often using an external USB drive and a tool called Time Machine to back up your Mac and using the service cloud either Apple or iTunes for backup of your iPhone and iPad devices.  (There are other ways to make backups, but Time Machine is a common choice).

  To learn more...  Apple puts at your disposal a web site the basics of the Mac who could help with this (and similar sites for learning iPhone and iPad), there are electronic books available for iPhone and iPad too and most Apple stores have workshops for Mac, iPhone and iPad which may help.   There are also a few books available if you prefer.  Suits you depends on how you prefer to learn.

  Apple has built into recent versions of OS X called FileVault 2disc encryption.  There is no need of software add-on for that.

  If you are not sure what version of the OS X software you use or which specific Mac you use, then you can use  > about this Mac.   That will show you the General information on your Mac, and - as you become more familiar with this and need of more details, you can ask for more details here.

  Yes, there is a huge amount that you can choose to learn and use with any one of these products, if you want, or you can choose to learn enough to get what you want to do.   It is entirely your decision.

• Brought back to the factory lost Ms one note

  Recently, I came across a player called Q on my computer and it couldn't access the drive, I followed some advice on an online form, nothing will do. One post suggested I back up my computer and bring back the computer as long as the plant. I hesitated because I couldn't afford to lose my computer. I backed up my computer on a Transcend 500 GB hard drive. For some reason when the computer a setback for my HD Transcend factory has been unable to bring the majority of my computer and only recovered back some documents and photos, lost all my docs in a single note and not really why. I talked to a guy at the shop where I bought my computer and told me once he goes back to the factory that went but I am convinced that it is recoverable, but for some reason, I was told, they are unable to do this and my only notes have disappeared. For some reason, they were unable to start off my Transcend hard disk and my a note was not accessible. So I am completely screwed out of everything I have in a note from Microsoft now? Transcend seems pretty useless after that because he created everything in a backup on the hard disk, but does not allow access to recover this. I was told to buy Norton Ghost, this operation can take a picture of the system, but Transcend image is inaccessible for any reason system.

  I have a HP Pavilion dv6 Windows 7 64 bit

  A reader of Q is used by Office click to launch products, generally Office Starter and partition, Q, is not accessible to the end user.

  His is not entirely clear if you have saved by using windows backup or if you have used a Transcend utility and how to recover your data depends on what use you to save in the first place

  Norton Ghost are any other imaging utility won't help recover your data

  Once a PC is restored to factory state you lost everything that was originally on the PC, although if the recovery created a windows.old folder, you will be able to recover your data originally saved in the default location for Documents

• I recently had to reimage my hard drive and need to reinstall CS5. When I do I get an error stating: another instance of deployment is already running. I tried to get back into market and stop before trying again to install.

  

  I recently had to reimage my hard drive and need to reinstall CS5. When I do I get an error stating: another instance of deployment is already running. I tried to get back into market and stop before trying again to install.

  I tried several times to reinstall without success.

  Help, please.

  Hi John,.

  Scott, please see the steps mentioned in the link below.

  • Resolution of error messages. CS5, CS5.5 bootstrapper

  It could be useful!

  Rayyan

• I bought an iPhone 6s and more in the United States, now its screen is broken, I live in China, personal APPLE let me come back to the United States for maintenance!  So ridiculous, help! Thank you!

  I bought an iPhone 6s and more in the United States, now its screen is broken, I live in China, personal APPLE let me come back to the United States for maintenance!  So ridiculous, help! Thank you!

  the iPhone may be served only in the country where it was purchased. Nothing strange in this situation. You can ask your friends or relatives in US to take your device at the Apple Store it.

• I can't use Roboform with 4.0 beta 10, so I can't use Firefox. How to get back to the beta version 9?

  I can't use Roboform with 4.0 beta 10, so I can't use Firefox. How to get back to the beta version 9?

  I think that there is a little more for it, but here's a solution that seems to work. After the installation of Roboform 7.1.7, go to: http://www.roboform.com/platforms/browsers/firefox and scroll down to a table listing the three browsers identifying the XPI file to load if it was not loaded automatically. Click the http://www.roboform.com/dist/roboform-firefox-3-4-frozen.xpilink. Firefox will ask you if you want to allow this should be installed. Let him. Finish installation, restart Firefox 4.0b10, and you'll see a Roboform 7.1.7 toolbar works. I did it on two computers, and everything seems to work.

• Need help to get back to the way it was when I got it

  My computer is a DellXPS400, age of 4 years. XP operating system. Please tell me how to recover my computer to the way it was when I bought it. I particularlty don't care if I lose the software. It's far too slow. It will only allow me to take it back to July 31, 2011. I want back to the factory. Any help would be appreciated. Thank you.

  Hello

  I recommend you contact Dell support team for assistance on this issue. However, refer to the following articles, which may be useful.

  Slow PC? Optimize your computer for peak performance
  http://www.Microsoft.com/athome/Setup/optimize.aspx

  How to make a computer faster: 6 ways to speed up your PC
  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED".

  original title: HELP... (seniors not if nobody PC)!

  Whenever I try to enter KB2559049 it always gets back after the restart, saying "NOT CONFIGURED" and then it lands in the updates page... So I used the Microsoft Fix - it tool and she is 'THE PLACE WHERE WINDOWS STORES DATA has CHANGED AND MUST BE FIXED... CHANGE OF PLACES in UPDATE from WINDOWS to THE SETTINGS by DEFAULT in WINDOWS'... well I think, but I don't know how the making and tool Fix - it didn't tell me how is... Please someone can help me to what is necessary.

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:

  If you have installed a security software on the computer, then I suggest you try to disable temporary and check to see if the same problem happens. Make sure that you enable security software back once the diagnosis is made to prevent the computer from virus attacks.
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Method 2:

  Try to download the update from this link and install the update manually and check if it helps:

  http://www.Microsoft.com/download/en/default.aspx

  It will be useful.

• The Task Manager - I'm trying to get rid of the programs and files unnecessary

  I have more than 140 lines of running abuse. I'm trying to get rid of the programs and unnecessary files.

  When I am online the cpu is also the diagrams, and it doesn't take long before his stop at all

  Terry c

  Hello

  Use the clean boot method and Process Explorer to determine what are these services and, if applicable
  ask questions. Of course, check out the other methods as well to help improve the system
  performance.

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• When I Center the text, I can't get back to the aligned left for the rest of the text in WordPad.

  * Original title: centering in Word Pad

  I don't know how to Center in Word Pad; However, when I Center the text, I can't get back to the aligned left for the rest of the text.  Everything I typed after that a title is also centered.  If I've left this text, the title goes back to the left margin.  Any info out there?

  Hello

  -Is confined to a specific document?

  This problem may be due to the rule of pointer.

  I suggest you to drag the rule of pointer to the left and see if it helps.

  Keep us informed on the status of the issue.

• When I look at my pictures on library it loads and it is super grainy, as my iso was too high, but when I look on developing it seems. What is happening and how I keep good fixed when I get back to the library and export?

  When I look at my pictures on library it loads and it is super grainy, as my iso was too high, but when I look on developing it seems. What is happening and how I keep good fixed when I get back to the library and export?

  Please see: photos look grainy on library but not on developing

  soft blurry images / when you view in the library but strong in develop mode? Lightroom forums

  Kind regards

  Mohit