Trying to install Win7, repeat the system is not ACPI compatible.

Similar Questions

• Windows found driver software for your device but encountered an error trying to install it. The system cannot find the specified file.

  Original title: Windows encountered a problem installing the software driver for your device...

  Arrrrgh!  Had a terrible time trying to get the scanner function works on my Epson Stylus CX7000F.

  I get the too common but seemingly irreparable "Windows has encountered a problem installing the software driver for your device...". Windows found driver software for your device but encountered an error trying to intall it. The system cannot find the file specified. "

  The job of printer/copier/fax end but not go on the scanner.

  I tried the 'fixes' to epson.com repeatedly with no luck.  This includes their reccomendation uninstall/install several times, trying even to this process in safe mode and clean boot the.

  I ran the program to 'fix' Microsoft ATS with no luck.  It has detected the error and said that the problem has been resolved, but guess what?  No, it isn't.

  I clicked on install update driver/driver from Device Manager.

  I tried the work around, eliminating the "LowerFilters" of the registry.  Guess what?  You have it, no luck.

  So, before I go and buy a new printer/scanner, with no guarantee that they will work.  Does anyone have another suggestion?

  I am running Vista, 32-bit.

  You can also try and replace or install the ntprint.inf file.

  I had a similar problem on a Windows 7 PC and noticed that this file was not present.  I just copied the file from a different PC Win7.  The printer, I tried to install was a Brother MFC-J410w.

  The file can be found here C:\Windows\inf

  Hope this helps someone.

• After installing Windows 7, the system does not work properly and must use the last known good configuration

  I installed the upgrade of Windows 7 a few months ago, my system was Vista 64 for everything I need, it was the upgrade, when I turn on my PC, my Start menu is not and none of my icons, to fix what I have to keep turning off my pc and turn on again by pressing F8 then go down to the last known configuration, how to fix this without having to shut down my PC and press F8 so that it starts normally all the time

  Download malwarebytes and run a virus scan to make sure that your computer is virus-free.

• HP dv7-6b50eb: HP recovery launches the cloned SSD, impossible to install win7 on the SSD.

  Hello

  I recently bought an SSD to accelerate my HP DV7. So I tried to clone my previous 1 TB to my 250 GB SSD hdd, but it seems that it's quite simple. :-(.

  I have created the exact same partitions (with the same size, orders, except for my main Windows partition type of course being given my SSD is much smaller) on the SSD as on my old Hdd. After that I made an exact copy of each 3 partitions (HP Recovery partition, system and tools Hp) but instead of copying the windows partition, I left a void on the SSD as the size of the Windows on the old hard drive partition is larger (the data) than the available size on the remaining on the SSD partition. I thought that I could boot on the SSD drive and start the restore process to install Win7 on the empty partition. But when I restart the pc, it does not seem to recognize the boot SSD partition, he prefers not to say "No operating system found".

  I also tried to activate the 3 partition directly (which is the recovery partition) to directly on boot as the partition, but it did not work either. The partition to activate before it was the 1st partition (which is the SYSTEM partition), but he has not worked either.

  Can someone help me do that cloning to work?

  FYI, I did the cloning and the creation of the partition using fdisk and dd on ubuntu.

  Thank you.

  Hi Wawood and Mista B,.

  Thanks for your comments I have a previous message, but strangely I have not found trace of the previous message, maybe I forgot to press the 'POST' button:-s.

  In any case, I was thinking that I understand your remarks Wawood but my goal isn't specifically for the windows on my new SSD partition (not interested in reducing the windows partition, it is just a statement), it was ok for me to any re - install from the recovery partition, a windows 7 from scratch.

  And I'd say Mista B by saying that it would have been stupid HP do not allow someone to use the recovery on the same pc partition, just because it has a different hard drive.

  Finally, I managed to do what I wanted to for those who are interested (HP is not so stupid after all:-p), here's the method I used to clone my hard drive of 1 TB to my 250 GB SSD and keep all the native HP (recovery, hp_tools, System) partitions with a 1 TB hard drive works correctly.

  So what I have is:

  -J' put the SSD as a second drive on my laptop (I guess it should work in the same way if connected by USB)

  -J' I started my pc and downloaded the EaseUs partition master

  -J' ran the program and began by doing a thorough cleaning of the SSD

  -J' made a copy of the system partition of my hard drive of 1 TB to my SSD

  -J' made a copy of the partition my hard drive of 1 TB HP_TOOLS to my SSD

  -J' made a copy of the recovery of my 1 TB hard drive partition to my SSD

  -J' created a new empty NTFS partition in the remaining partition

  I'm done with the same exact score as agenda in my 1 TB HDD.

  1. THE SYSTEM

  2 NTFS empty

  3 recovery

  4.HP_TOOLS

  After that my SSD was not bootable, because the MBR has not yet been copied.

  Then I started a live CD of Ubuntu and I installed boot-repair and he ran.

  I chose the advanced options and set set the mbr and boot from the partition 3.

  I then put the partition recovery (partition 3) as being ACTIVE.

  I removed the hard drive of 1 TB of the laptop (to avoid any error during execution of recovery which ends with the recovered 1To:-p) beeing and replaced it with the SSD.

  I then rebooted the laptop and it starts directly on the recovery partition. I finished in the recovery strategy (I could not choose the recovery from an earlier point in time given that the windows partition is empty (no windows backup)).

  I chose over the full restore, the slight recovery with only OS and drivers and it does the job of recovery. Now that the of what I write this resolved thread :-).

  Hope this helps some people out there with the same questions.

• I have a laptop HP550 with a duo Core 1.8, I tried to install win7 64 bit

  I have a laptop HP550 with a duo Core 1.8, I tried to install win7 64 bit. My question is this...

  "My laptop HP550 with a 1.8 bicoeur processor will accept A Windows 7 64 bit operating system or should I stay with a 32-bit operating system." Any help will be greatly appreciated

  Yes, you will be able to run Windows 7 64 bit on this system, but it may not be quick.

  -Your processor supports 64-bit.

  -2 GB or more of RAM is recommended for the 64-bit version of Windows.Check your.

  You need to install Windows 7 64 bit only if you have a reason behind choosing him over 32 bits. Personally, I would recommend that you use the 32-bit Windows.

• ERROR "the system has not been modified" when you try to install a game.

  Hey guys, I am trying to install a game called Smite but a little while in the installation, I get an error that says that "the system has not been modified. To install this program at a later time, run the installation again' can someone tell me how to solve this problem? I am running Windows Vista 34 bit

  Hey Connor,

  I wish that you contact the support of game from here-

  www.hirezstudios.com/smitegame.

  Back to us for Windows issues, and we will be happy to help you.

• my pc cannot accept the installation of antivirus, it shows that the system is not suitable for running ms Dos and ms windows app com help me install

  my pc has failed to install any antivirus it shows that the system is not appropriate for the execution of ms - back and ms windows application help

  Hello

  problems to install your anti-virus software, contact the manufacturer of the anti-virus

  also scan for Malware

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen "select the driver to install."

  Device drivers for a Win 7 install on Ubuntu system

  Hello

  I bought a Toshiba Portege M400-S5032 tablet PC reburbished that came with Ubuntu installed.  I am trying to install Windows 7, but he does not see the disk partitions and the installation goes to the screen 'Select the driver to install' with no option. Because it is not find Windows device drivers, I went to the Toshiba site to see if I could download a full game, but I can not...  So, how do you get drivers for Windows can install (or y at - it another way to work around it)?

  Thank you!

  The bios on fail safe defaults options are?

  It will probably take the raid driver

• While trying to install flash player, the software to communicate in Russian - I don't speak this language and need to fix this.  Help!

  While trying to install flash player, the software to communicate in Russian - I don't speak this language and need to fix this.   How can I fix the problem of language?

  Hello

  I was able to reproduce the behavior when I updated the Russia region.  If the language and region are worth English/United States of America, the behavior does not occur.  Did you by chance, perhaps by accident, change the region to Russia at some point and then change it back? You have rebooted your system since then?

  I will forward this to the people who handle the installer online and see if they can reproduce.

  In the meantime, you can check to see if the installer offline, full, posted at the bottom of the Installation problems | Flash Player | Mac page exhibit this same behavior?

  --

  Maria

• I installed Kaspersky Anti-Virus 2011. But the system does not recognize.

  Kaspersky Anti-Virus 2011, I installed on my vista system and everything was fine, but now all sadden the system does not recognize it. could you please help me with this?

  Hi gigikhanoom,

  1. you receive messages or error codes?

  2. you remember to make changes to the computer before this problem?

  Windows doesn't detect all antivirus programs, and some antivirus programs report their status to Windows.

  If you receive notifications related to security on your virus protection software, but you know that your antivirus software is installed and updated, you can follow the steps below to stop receiving these notifications.

  Note: You should only do this if you are sure you have a complete and up-to-date antivirus program installed on your computer and that real-time scanning, which checks every file before it opened or used, is turned on.

  For more information, consult the following link:

  Use antivirus software that Windows doesn't find

  If you're still having problems, then you can try to uninstall and reinstall Kaspersky and check.

  You can visit the links below to uninstall and reinstall Kaspersky:

  Uninstall or change a program

  Standard installation of Kaspersky Anti-Virus 2011

  Hope this information is useful.

• I bought Adobe Creative full package of cloud as a teacher, but applications that have tried to installed, they are the poster as the trial for 30 days, why it comes as version track and not as full version.

  I bought Adobe Creative full package of cloud as a teacher, but applications that have tried to installed, they are the poster as the trial for 30 days, why it comes as version track and not as full version, can someone help me on this, as I tried to reach the live chat, but can't find it

  Hello

  Adobe has established this link https://helpx.adobe.com/manage-account-membership/cc-reverts-to-trial.html

  After this, and if your applications make some problems you can use https://helpx.adobe.com/creative-suite/kb/trial--1-launch.html

  If necessary and for other issues, click on the http://helpx.adobe.com/contact.html until your arrival at the 'cat'. If it is 'open' (ago opening hours) Please use it, I personally had the best experiences. I quote Adobe Preran employee: the chat button is enabled as soon as there is an available agent to help.

  Hans-Günter

• I have a new card, I try to change my payment information, the system will not let me. Let's not say address. Ive tried several ways to enter address >?

  I have a new card, I try to change my payment information, the system will not let me. Let's not say address. Ive tried several ways to enter address >?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  I have adobe acrobat 7 Professional and I am trying to install it, but the old serial number does not work, windows 10

  See download Acrobat 7 and CS2

• my computer died and I am trying to install CS on the new

  my computer died and I am trying to install CS on the new

  If the message really indicates you have already reached your maximum number of activation, you need to reset account activation.  Contact adobe support, http://www.adobe.com/support/chat/ivrchat.html

  If she says something else, attach a screenshot of the message, http://forums.adobe.com/message/4209263#4209263

• Windows Virtual PC integrated with components lock me out of my WinXP - error of OEM comments - "the system could not log. Make sure that your user name and domain are correct... »

  With my new desktop Windows 7 hardware configuration, I decided (before you consider VMware Player) to retry Windows Virtual PC; but instead of using Windows XP Mode (which is useless because the disk is inaccessible), I decided to use my own Windows XP Pro OEM. [I use it for games that won't play on Win7.  Security issues are also irrelevant, because for these games, I'm not likely to use the Web.  Of course, I always Windows Security Essentials in my OEM customers.]

  The problem here is, whenever I have to Activate my integration, features VPC opens as if the Windows XP Mode have been installed (it is not); and when the screen is turned on, it asks my user name and password.  I tried to use the name and the password that I entered when installing my XP OEM; but I get this message:

  "The system could not log.  Make sure that your user name and domain are correct.  Type your password again.  Letters in passwords must be entered using the proper case. »

  How is it that I can't access my Windows XP OEM guest when the integration features are enabled?  Only when they are disabled can I activate my OS; invited but it's counterproductive, because I won't be able to move items from my host in my comments.  Once more, if I should decide to use VPC as my host VM for Linux Ubuntu/Kubuntu, what chance is there that the activation of the integration features will lock out me my Linux guest?

  Another thing: in the Start Menu under Windows Virtual PC folder I have shortcuts for ' Windows Virtual PC ' or 'Virtual Machines' (according to the Win7 version I use, 32-bit or 64-bit); but I also have "Windows XP Mode", I have not installed.  How is that possible?  I checked the shortcut, and point it to rundll32.exe.  Should I just get rid of the shortcut, or I will incur damage to my VPC if I do?

  Hello Cooky,

  Please provide a detailed description of the issue.

  I understand the inconvenience you encountered. However, I appreciate your efforts.

  To get more information about it, we have a dedicated forum where these issues are dealt with and would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the best support.

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.