Trying to mix tracks at a track that holds the information of right and left

Similar Questions

• How to select the right and left a track audio channels in the graphics editor?

  I put my 2 keyframes for gradual and hit the chart next to the Audio levels. Then in the graph Editor to see the slope of the fade.

  I would like to use the Bezier handles to edit bland. But when moving them around it just doesn't move right and left audio channels separately, and I have no idea how to adjust them in unison or at least take the other to the same position as the first.

  Thanks for the help

  In General, audio Ae tools are not only versatile, so do not expect to have a hard time with them. your questions - it seems that if you want to manipulate the keyframes for Audio levels in the graph Editor, you will need to adjust the two handles, one at a time.

  two workaround solutions: I can think of:

  1. If you want to control the volume, it is better still to use stereo mix effects and not audio levels. It also has 2 values, only this time both are visible in the timeline panel if you can drag the two simultaneously (how you couldn't front with audio levels) and manipulate your chart.

  2. If you still want to control audio levels after reading the 1st work around: you can connect your audio levels to a cursor of expression: Add a cursor of expression to your audio layer alt now (Effects-> expressions-> slider control control) click on sound levels to activate the expressions for this layer and drag the pickwhip expression. This will make the slider to control the sound levels and you'll have only one value in the graph Editor.

• I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.

  I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.  A friend told me that I have to uninstall and then re-install again.  I am a 71 years who does not know what to do.  Help

  Hi jimm13886845,

  Of course I'll help you get this problem is resolved.

  Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.

  Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if you encounter a problem, we will be happy to help you.

  Kind regards

  Nicos

• I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it.

  I was running Mozilla firefox on my computer until two weeks ago. At that time, the screen went black and now I am not able to use it.  When I click on the icon and open to the top it says cannot load xp.com and a flag of resolution comes up saying it can't run a resolution less than 1930 x 2300. I have no idea what this means and how I can solve this problem.  I thought that maybe the application was bad, so I deleted and then added it back on and it does the same thing.  I even did a restore of the system to try hard but nothing I did the work.  So, how can I solve this problem.  I'm not a computer genius, so he must be explained in simple easy to understand instructions.

  Hello

  I suggest that you view in Mozilla Firefox community because there seems to be a Firefox problem.

  https://support.Mozilla.org/en-us/

  Some examples of the problem:

  «I can't open Firefox, it says could not load xpcom.» Who is wrong? »

  https://support.Mozilla.org/en-us/questions/965228

  "I get an error"Unable to load XPCOM". I know that I can reinstall Firefox, but how do I save my favorites?

  https://support.Mozilla.org/en-us/questions/1029239

  'Error message cannot open the XPCOM and impossible to open ALL pages '.

  https://support.Mozilla.org/en-us/questions/1006494

  Here is a YouTube video on fixing this error:

  https://www.YouTube.com/watch?v=x_C2eaNj234

  See you soon.

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Hello

  How can I force DAC to run always full load for one of the task that executes the stored procedure? And remaining tasks load incremental in the second and sub sequent executions.

  Thank you

  Jay.

  Hi if your task is running an informatica mapping you can set your DAC task to run the full mapping for incremental and full loads, so tab task just point to the mapping.

  Hope that helps.

  Thank you

• I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

  I cannot install the suite Criative cloud reinstall every time, she told me that gave the error in installation and transferred me the site of re - download the creative cloud. Can you help me?

  uninstall all cc (if nothing is installed) by using the adobe uninstaller programs.

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer, and then install, https://creative.adobe.com/products/creative-cloud

  Use the desktop application to install your programs of cc.

• has broken the plastic hinges that hold the keyboard connectors - x100e - corrections? solutions?

  Some time ago I had to disassemble a x100e lenovo to replace the LCD, which proved that the fine.

  But being the inexperienced decoration that I am, I had no idea how to remove the cable that connects the keyboard to the motherboard as well as the cable to the motherboard vga port. At the time wherever I am done with it, I broke the plastic flap that holds the cable in the motherboard.

  My solution for the last year has been to stuff some paper folded into the region to help maintain the cables against the pins on the motherboard, but it has been driving me craaaazy. The contact is crap then the trackpad works intermittently and the external monitor changes color when I apply pressure on the keyboard.

  I was wondering if you guys might advise a fix. Are there spare parts? is there a better way to fix it?

  Any help would be appreciated.

  Thank you!

  Hi, nuguns101

  I did some research and found the Manual of Maintenance of hardware for your system. Unfortunately, there is not of the spare parts for that particular item. I did a little searching around the web and found this article that can help. You can try the suggestions, but I'd be careful if you try the duct tape method.

  It will be useful,

  Adam

• I am trying to create a photo book in Australia, but the College uses French and Euros. Can I convert in English and AUD?

  I'm about to order a photo book that I created in Photos. When I use the tab book buy the cost is in Euros and the information is in French. How I got all the English version and AUD?

  Do you live permanently in Australia?   Are - this Apple based on the use of an Australian bank with a supported by this bank credit card account?

• where can I find the windows of the installation files on the hard disk of a machine that has the pre installed software and recovery software?

  where the windows installation files are stored on a disk hard if the software is preinstalled. My systrm broke down and will not restart, want to re window installation but do not have a disc, samsung refuse to number one, all I want to do is to reinstall windows 7. to access the command propt and can launch the 1st screen of the windows setup, but when it gets to step 2 his request that the drivers can be installed. any idea?

  If victory has been pre-installed by Samsung how to recover as long as the plant is a Samsung process, usually through the hidden restore partition.

  There is nothing on the drive on which the end user can use to reinstall other through instructions Samsung.

  On some PCs from Samsung, you press F10 as the PC starts to access recovery.

  Be aware that if the player does not, you will not be able to recover.

  Only Samsung can provide the recovery disks, or the means of recovery in the factory.

  Although there is an ISO official win7 download to create the installation win7 dvd for use with your Win Key.

  If you use this method about the utility Samsung provided will be installed and you will need to visit their drivers Samsung support

• Create form that records the data locally - iOS and Windows (using AIR)

  Hi, I need to be able to create a form that stores the parts locally on iPads and touch of Windows screens. The app will be used as a kiosk at exhibitions, so there is no internet connection, but devices will be limited in number and owne3d by the customer.

  Is there a simple way to do this? I looked at other options: HTML5 (where the user is rerouted to local browser) or Acrobat?

  With AIR, you can still use an internal DB SQLlight to store data - or even write a based local text file. Depends on the complexity of the data, I guess.

  Adobe Flash Platform * working with local SQL databases in AIR

• Table that stores the information of Transport server

  Hi gurus,
  What is the name of table in the b2b database that stores the transport Server details?
  
  I use Oracle 10g B2B.
  
  Concerning
  AYUSH

  Hi Mary,

  I do not have a facility of 10g here, but if I'm not mistaken not it is table TIP_TRANSPORTSERVER which holds the transport server details.

  Kind regards
  Anuj

• my screen turned upside down, how to fix this? Apparently, I pushed the magic button combination when I tried to grab my cell phone so that he fell on my desk and all of a sudden my screen has been reversed. help someone!

  I need help to change my screen in its original position, I think that's probably a problem of desltop and customization, but I'm not technically savvy, nor do I enjoy reading backwards!

  Try to press Ctrl + Alt + up ARROW, or try Ctrl + Alt + and a different key to the arrow.

  If this does not work: right click on the empty desk > graphics > Rotation.

  See you soon.

  Mick Murphy - Microsoft partner

• Apply to a Style object that defines the style of paragraph and 'paragraph style' to the text block with another block of text?

  I am trying to automate the application of styles in a brochure. Each image has a name, title, telephone, email, city... style paragraph.

  Can I apply an object style that instantly sets the styles of each paragraph. However if I have the linked text boxes, the style of the object does not seem to affect the block of text, or one of the text boxes. Is there a way to get around this?

  I just looked upward: this feature is limited to "simple, smooth text frames."

  I'm sorry.

• Problem for all Microsoft products that contains the functionality to search and address bar replace Outlook.

  I am facing a constant problem with IE 8, Control Panel, Windows Explorer and any other product that has an address bar. The problem is this: as soon as I finish the login sequence, so that on my desk, the content of the history of the address bar starts flashing quickly, even if I did not open IE or any other application. Once I open IE 8, control panel or any oher application that contains an address, historical content bar drop-down startup flashes quickly and blocks the page or the screen, it is impossible to execute any action/activity. Then, without making that one thing, the behavior stops for a while and the app works normally. Then it would start again.

  At the same time, when I open an email in Outlook, similar behavior takes place with search replace automatically shooting upward and find what drop-down box flashing quickly and my lock screen. I had to communicate with McAfee and had done everyhting in the perspective of the virus without result detection/removal.

  No matter what thoughs on what could cause this problem. Thanks for any help/comments/suggestions, that you can provide.

  Try updateing your graphics driver from your PC manufacturer or the manufacturer of graphics so a generic PC. Don't use winupdate for pilots