Trying to open "Windows Update" of the icon of the Office does not work.

Similar Questions

• Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

  My computer stops the update via WIndows Update Component

  Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

  My computer has a few updates, but can not run these update

  Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

  He starts to run updates 1 of 13... and stops

  If I shutdown normal e, computer stay likehanging 1 hour without stopping.

  I would like to know how to solve this problem

  Thank you

  Concerning

  Gladmar.

  Hello

  Were there any changes made on the computer before the show?

  Perform the following methods and check:

  Method 1:

  I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

  a. click Start, type services.msc and press enter.
  b. search Windows Update.
  c. right-click on the service and select Properties.
  d. in type of startup, select enable.
  e. click Start under the Service status.
  f. click OK.
  g. Repeat steps c to f for the following services:

  Background Intelligent Transfer Service
  Cryptographic services

  If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

  Method 2:

  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Method 3:

  Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

  Disable the antivirus software
  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 4:

  The problem with Microsoft Windows Update is not working

  http://support.Microsoft.com/mats/windows_update/

  See also:

  Troubleshoot problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Updates: frequently asked questions

  
  http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

  I hope this helps.

• My update of the software does not work

  My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

  What updates you trying to install?

• Installed the updates, but the display looks like windows 98 and the Wireless does not work

  Hello
  I use a laptop with vista service pack 2 and I tried to update windows via windows update on the recommendation of the support page from microsoft on how to unload a debugger. There are only three optional updates available, I forgot what they are and after restarting the computer the theme looked like windows 98 and my without wire might work, and also, I was still having problems with the game with the question of the debugger.

  What should I do?

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves. The 'remains' of McAfee may be cause of your problem.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 test cycle.

  NB: If the application pre-installed McAfee subscription or free trial period has expired before you install Threatfire, the latter may not have installed correctly and can not work correctly since you installed it.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Adobe should warn or reimburse users of the 16-bit window machines that the software does not work

  In good faith, I'm subscribed to Adobe expected of professional quality products.

  I have a fast and powerful - if by the standards of recent years - machine and it certainly would have been possible to run older versions of Photoshop and Lightbox on a Quad Core i5 but when I subscribed versions will not properly work on a 16-bit PC.  Windows 16-bit only will address I think 4 GB of memory and a large part is absorbed by the operating system.  I was not yet able to define the edges on a selection!

  I tried to unsubscribe, but Adobe has offered 60 days for free!  Clever.  They bought me comes back with who in the hope that I will be able to update my system at that time here.

  But they should warn people - creative cloud does not work on 16-bit computers when using images of modern resolution.

  Hello

  Please see the following links:

  Manage your creative cloud membership

  Cancel your membership creative cloud

  If you still need help please contact support: contact customer service

  *Remember to stay signed with your Adobe ID ( email id used to purchase the subscription ) before accessing the link above*.

  Select the exact options listed below for support options:

  

  Let us know if that helps.

  Kind regards

  BANI

• Windows Vista cannot be updated because the service does not work!

  Windows Vista will not update because it says that the service is not running.  He said I might have to restart the computer.

  I tried several reboots the computer.

  I tried to get into the services and manually stop and restart the service.  Nothing seems to work.

  I'm downloading the SP2 for Vista, let's see if that fixes the problem.

  Any help?

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

• Windows Update page does not load, another updater with "update" in the url does not work, and the microsoft Download Center will not download. Help!

  Right. I read the other posts and do not know if it's the same or not, but...

  Update Windows page fails to load - no error message
  antivirus and another updater with update in the URL cannot purely and simply, or don't load - no error message
  any attempt to download anything from microsoft download site fails to load - no error message

  I got stardock, not my colors, uninstalled

  same result.

  any ideas?

  CLM-NSWG4,
  It seems to me that you can have to deal with a virus\malware infection.  You can watch these threads discuss virus problems and see if you are able to detect problems, that I suggest you use an online scanner (if you are able to) and scan your system.

  Windows Live OneCare Safety Scanner Windows 7\Vista

  Windows Live OneCare Safety Scanner Windows XP

  Get rid of malware

  Can I clean an already infected computer?

  If you need more help then read: what to post in the Windows Update forum
  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Restore windows files when the connection does not work

  After an accident at some point, I noticed "Restore to folder windows when connecting" did not work.

  In "Folder Options - view" it is checked.  Also, I did 'Restore Defaults' and rechecked it.

  Confirmed also with regedit it wasHKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced\PersistBrowsers set.

  Another user on the system do not have the problem.  How can this be corrected?

  Concerning

  Ray

  Raymond,

  What is the version of Windows installed on the computer?

  I wish that you perform a scan of System File Checker-

  https://support.Microsoft.com/kb/929833/en-us

  If it does not then, I would have you decant the contents of the user account to a new user account this account is possibly corrupt.

  Refer to this article-

  http://Windows.Microsoft.com/en-CA/Windows/fix-corrupted-user-profile

  Thank you.

• After that usual windows update 5.7.1 Lightroom 64-bit does not work

  Hello. I turned on my computer and it began with the usual stupid updates. After the update, the first thing I did was open to the top of lightroom. Lightroom came with a window in front of it saying "Lightroom has encountered an error when reading the preview cache and needs to stop smoking. Lightroom will attempt to solve this problem, the next time it starts. "The only thing you can do is to click on 'Ok' when I do both this window and lightroom closes. I open lightroom several times only to have the same problem. I uninstalled and reinstalled, same problem. I restarted my computer, the same problem. I just use lightroom yesterday without any problem. I have 10 windows and that you've had for a while now. I have no idea what updates have been, but I know it's one of those usual often happens when you turn on your computer. Anyone know what's the problem? And how to fix it?

  This is not related to the update of Windows, the error message means that your preview cache is corrupt.

  With Windows Explorer, navigate to the folder containing your Lightroom Catalog, usually inside the photos / Picures my file.

  Delete the folder with the name ending by Previews.lrdata. Do not remove anything else.

  Now, launch Lightroom and previews are rebuilt when you browse the library.

  

• The mouse does not work in the drop-down list windows

  I can click on the menus in the command line with my mouse, but once the new window opens, I use my tab, arrows and enter to navigate within this window key.  The mouse does not work.

  I am on Windows 7 and work, of course, in the Cloud of the IND version.

  Thanks for the help.

  See the signs and tools InDesign respond not to the clicks of the mouse (Windows 7/Vista)

• I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  I upgraded to Keynote 6.0 and now have a new logo to Keynote 6.0 in my Dock and a Keynote 5.0 Logo in the Dock. Tried to drag the logo 5.0 on the dock does not work according to the instructions. Comments?

  If you have any documents open in Keynote 5 then you will not be able to drag it to your Dock. IF a right-(control) - click the Keynote icon 5 shows Quit in the drop - down and then select Exit. Now you should be able to slide your dock.

  It is often necessary to drag it from the dock, drag the icon quite some distance from the dock (to what the REMOVAL appears on the icon).

  You can also right-(control) - click the icon select Options, and then, in select Options remove the dock.

• Get the error the Service does not work when you try to update

  Original title: Dell Inspiron 1545 model

  My Labtop wife; the automatic update is enabled; but will NOT be updated. When I try to update; There are NO error codes. After trying to update. The computer

  addresses by specifying THE SERVICE IS DO NOT running. You must restart; also the F8 key does not work.

  Hello

  1. What is the error message right on the service does not work?

  2. were there any changes (hardware or software) to the computer before the show?

  Perform the steps in the link and check.

  The problems with the installation of updates (Windows Vista)

  Hope this information helps.

• When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.

  When you try to import a .mp4 file in windows movie maker, the program does not list the file when I search for it in his file.  Help, please.

  As I suggested previously, conversion to a format like
  . WMV before you import it into Movie maker may be the solution.

  The free Converter from Microsoft can be a place to start:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601
  (runs under WinXP SP3 / Vista / 7)

  When you install the program...
  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  (If at any time you get lost while browsing
  the program of... to... Window / active Reset
  Type or workspace... CTRL + SHIFT + R)

  Look for the file/s that you want to convert.
  (If files do not appear... open the fall
  window and choose... All files)

  Click (highlight) left the files and the left on the Open button.

  You can see the files in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.

  Now... try import you again. File WMV in Movie Maker.

  More converters:

  There are to many converters available on the net...
  the following links are some examples. You can
  need to experiment to find the best result.

  Proceed at your own risk *.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  (1) format Factory (freeware)
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup270.zip<>
  (FWIW... installation..., you can uncheck
  'all' boxes on the last screen... even in this case, it may
  install the Ask toolbar on your system)
  (Windows XP / Vista / 7)

  First, you will need to decompress the file or just open the
  Drag FFSetup270.exe out of the folder
  and drop it on your desktop. To install left click.

  (2) Freemake Free Video Converter (freeware)
  http://www.Freemake.com/free_video_converter/
  (Windows XP / Vista / 7)

  (3) Koyotesoft Free Video Converter
  http://www.koyotesoft.com/indexEn.html
  (2000/XP/2003/Vista/Seven)

  (4) Sothink Free Video Converter
  http://www.Sothinkmedia.com/video-converter/
  (Windows XP / Vista / 7)

  (5) hamster Free Video Converter
  http://www.PCWorld.com/downloads/file/FID, order 155794, 4 pages, 1/download.html
  (Windows XP, Vista, 7)
  (If you choose Custom Installation
  You can uncheck additional modules you
  do not want to install)

  (6) quick Media Converter
  http://www.Cocoonsoftware.com/
  (Win XP, Vista, Win 7 Home Premium)

  (7) SUPER © Simplified Universal Player Encoder & Renderer
  http://www.videohelp.com/tools/Super
  (the download mirror site is faster) (Windows XP / Vista / 7)

  (8) Xilisoft Video Converter
  http://www.Xilisoft.com/video-converter.html
  (not freeware but receives good reviews)
  (Windows XP (SP2 or later) / Vista / 7)

  Good luck...

• Hello. I had upgraded to Windows 10, but my printer driver is not compatible. I reinstalled windows 7, but now my acrobat CD player does not work. I can't open it even!

  Hello. I had upgraded to Windows 10, but my printer driver is not compatible. I reinstalled windows 7, but now my acrobat CD player does not work. I can't open it even!

  AND I can't uninstall it.

  I discovered that DC is an APP.

  What I really need to upgrade to windows 10 again to uninstall acrobat and then reinstall windows 7, so that I can print my PDF?

  Or is there a quicker way?

  Thank you.

  Connie

  He continues:

  Still, I couldn't install Adobe Reader. He wanted to write, she already existing on this computer!

  Even if she had removed the ikon office and Control Panel!

  Then I remembered something I have tried before but forgotten:

  I downloaded "Revo Uninstaller"! Excellent program! It works every time!

  I choose the advaced option and asked him to remove all the files from Adobe. He found 1.275 left files!

  It worked!

  I could reinstall Adobe Reade, r and I can open my PDF once again :-D

• V11.0.12 XI and IE11 Acrobat. Hyperlink inside the PDF does not work when the PDF file is opened with any browser.

  V11.0.12 XI and IE11 Acrobat. Hyperlink inside PDF is a blue rectangle and links to another PDF. When PDF is opened in Acrobat, the link works. When opened in any browser (IE, Firefox, Chrome) the link does not work. How can I get the link to work in browsers?

  I think it is a bug. I uninstalled Acrobat and reinstalled Acrobat v11.0.0. I tried the link and it works properly. Then, I installed each both updated and tested the hyperlink. Update 1-10, that the link works. However, when the 11.0.11 update is installed, the "Go to a page in another document" hyperlink stops working in browsers. V11.0.12 installation does not solve the problem. If I uninstall Acrobat and install v11.0.0 with updated v11.0.10, everything works fine.