Windows Vista cannot be updated because the service does not work!

Windows Vista will not update because it says that the service is not running.  He said I might have to restart the computer.

I tried several reboots the computer.

I tried to get into the services and manually stop and restart the service.  Nothing seems to work.

I'm downloading the SP2 for Vista, let's see if that fixes the problem.

Any help?

How to reset the Windows Update settings?
http://support.Microsoft.com/kb/971058

Tags: Windows

Similar Questions

  • Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer

    My computer stops the update via WIndows Update Component

    Whenever a try to do the manual update using this component I get the message;   * Windows Update cannot currently check the update, because the service does not work, you may need to restart your computer *...

    My computer has a few updates, but can not run these update

    Whenever I try to run computer shotdown/updates remain frozen for a while and stops without updating

    He starts to run updates 1 of 13... and stops

    If I shutdown normal e, computer stay likehanging 1 hour without stopping.

    I would like to know how to solve this problem

    Thank you

    Concerning

    Gladmar.

    Hello

    Were there any changes made on the computer before the show?

    Perform the following methods and check:

    Method 1:

    I suggest you to check if you are able to access Windows Update service and ensure that the following services are started. If it is not started, follow these steps:

    a. click Start, type services.msc and press enter.
    b. search Windows Update.
    c. right-click on the service and select Properties.
    d. in type of startup, select enable.
    e. click Start under the Service status.
    f. click OK.
    g. Repeat steps c to f for the following services:

    Background Intelligent Transfer Service
    Cryptographic services

    If the steps do not help to solve the problem, you can go ahead with the methods mentioned below and check.

    Method 2:

    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058

    Method 3:

    Your anti-virus software is in conflict with Windows updates. You can test this by temporarily disabling your antivirus:

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 4:

    The problem with Microsoft Windows Update is not working

    http://support.Microsoft.com/mats/windows_update/

    See also:

    Troubleshoot problems with installing updates
    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

    Updates: frequently asked questions


    http://Windows.Microsoft.com/en-us/Windows-Vista/updates-frequently-asked-questions

    I hope this helps.

  • Error: Windows Update cannot enabled updates, because the service is not running.

    Original title: update for windows vista.

    Windows Update is not enabled updates, because the service is not running.

    I spent all day trying to update via different methods on different for one without a bit of luck.

    Can anyone help?

    Windows Update is not enabled updates, because the service is not running.

    I spent all day trying to update via different methods on different for one without a bit of luck.

    Can anyone help?

    Search for malware:

    Download, install, execute, update and perform analyses complete system with the two following applications:

    Remove anything they find. Reboot when necessary. (You can uninstall one or both when finished.)

    Search online with eSet Online Scanner. Delete everything is found.

    Reset.

    Get the tool system update (save) for your architecture system and do a right click on it and "Run as Administrator". Choose the right one for you:

    Let things run/fix.

    Reset.

    Try to update.

    If it still fails, try the following:

    Reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Try to update.

    If it still does not work, try this...

    1. Start an elevated command prompt.
    2. Run the following commands pressing on enter after each line:

      net stop wuauserv
      CD %SystemRoot%\System32
      Ren C:\Windows\SoftwareDistribution SoftwareDistribution.old
      net start wuauserv

    3. Reset
    4. Try to update.

    * Important * When you do this, the following problems occur:

    • Updates that are currently downloaded but which have not yet been installed must be downloaded again by using Windows Update or Microsoft Update.
    • When you remove the Software Distribution folder, your download history is deleted.
    • If you currently receive updates from Microsoft Update and Windows Update, you will need to reselect this option from the Windows Update Web site.


    * Note *     if the problem is resolved and you can successfully download and install the updates, you can delete the directory SoftwareDistribution.old to recover disk space.


    STILL no? We have something to try...

    Use this FixIt:
    How to get the latest version of the Windows Update Agent

    Reset.

    Save components WU:

    1. Start an elevated command prompt.
    2. Run the following commands pressing on enter after each line:

      regsvr32 Jscript.dll
      regsvr32 c:\windows\system32\wuapi.dll
      regsvr32 c:\windows\system32\wuaueng.dll

    Reset.

    Try to update.

    If it still does not work after that - repeat ONCE more that part...

    Reset your Windows with this FixIt components update:
    How to reset the Windows Update components?

    Reset.

    Try to update.

    Come back and let everyone know how you faired.

  • Problem updating Windows "impossible to verify updates because the service is not running."

    Am having a problem with Windows Update on my laptop (Vista). Receive a prompt that displays "cannot check the updates because the service is not running. You may have to restart your computer. Yes, I restart. That is what it is?

    I had the same problem on Vista 3 PC based over the weekend and did what follows with quick success after many corrections suggested on this site:

    * go to services and stop the Windows Update Service

    * locate C:\Windows\SoftwareDistribution\folder & remove all it's content (if you have step 1 any content does not correctly as they will be in use by another program)

    * restart the Windows update service

    * ask to check updates

    All mine quickly searched and downloaded all updates applicable, installed and done!

    I hope that it works easily for you too :)

  • Windows update will not work or let me start the update program, get the Windows Update error cannot currently get "some updates because this service does not work"

    I moved and my computer is stuck off like 2 and a half months. Well, now I'm back on it, but for some reason any my Windows Update does not start. Whenever I go to him, he tells me that the program is not running and you may have to restart. I do and he said to me again and the same thing. So I went in my services to ensure that all programs, that depends on run works and he says even its operation. How can I fix it?

    Hello Nick,

    Here is a link where you can reset windows update components.

    http://go.Microsoft.com/?linkid=9665683

    Download the fix - it and run the fix - it.

    Please select the mode option run aggressive.

    Disable your anti-virus software.

    Restart the computer and verify if you are able to install the updates.

    Kind regards

    Sumanth.B.S

  • Windows vista Home premium recovery question - how to get the source for windows vista home edition premium as the recovery does not work since the recovery partition

    How to get the source to windows vista Home premium recovery is not from the recovery partition and gives me an error message

    Hello

    Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • Windows updates are impossible to install. Error "Cannot verify updates, because the service is not currently running Windows."

    Original title: 15 necessary security patches were not installed (using the 09/10/2012 definitions version 2012.10.9.3 Microsoft Security Bulletin Summary). .....

    15 necessary security patches were not installed (using the 09/10/2012 summary of definitions version 2012.10.9.3 Microsoft Security Bulletin). Note: The security criteria require that severity critical and Important security patches must be installed:

    Q2596615 -Important (Details...)
    Q2596672 -Important (Details...)
    Q2596744 -Important (Details...)
    Q2596754 -Important (Details...)
    Q2596792 -Important (Details...)
    Q2596856 -Critical (Details...)
    Q2596871 -Important (Details...)
    Q2597161 -Important (Details...)
    Q2597162 -Important (Details...)
    Q2597969 -Important (Details...)
    Q2687314 -Critical (Details...)
    Q2687315 -Critical (Details...)
    Q2687440 -Important (Details...)
    Q2687441 -Critical (Details...)
    Q2690729 -Critical

    (Details...)

    However, the Windows updates say "no critical updates are missing. Thank you. Alberto

    Hello, I also have the same thing happens and a solution please.
    Difficulty he avail me do not see the problem I get...
    KB2667402 - critical (details...)
    Q2596615 - Important (details...)
    Q2596672 - Important (details...)
    Q2596744 - Important (details...)
    Q2596754 - Important (details...)
    Q2596792 - Important (details...)
    Q2596856 - critical (details...)
    Q2596871 - Important (details...)
    Q2597161 - Important (details...)
    Q2597162 - Important (details...)
    Q2597969 - Important (details...)
    Q2604115 - critical (details...)
    Q2604121 - critical (details...)
    Q2653956 - critical (details...)
    Q2655992 - Important (details...)
    Q2656368 - critical (details...)
    Q2656373 - critical (details...)
    Q2656405 - critical (details...)
    Q2656411 - low (details...)
    Q2658846 - Important (details...)
    Q2659262 - Important (details...)
    Q2660649 - Important (details...)
    Q2676562 - critical (details...)
    Q2685939 - critical (details...)
    Q2686827 - critical (details...)
    Q2686831 - critical (details...)
    Q2687314 - critical (details...)
    Q2687315 - critical (details...)
    Q2687439 - Important (details...)
    Q2687440 - Important (details...)
    Q2687441 - critical (details...)
    Q2688338 - Important (details...)
    Q2690533 - Important (details...)
    Q2690729 - critical (details...)
    Q2691442 - Important (details...)
    Q2698365 - critical (details...)
    Q2705219 - moderate (details...)
    Q2712808 - moderate (details...)
    Q2719985 - critical (details...)
    Q2724197 - Important (details...)
    Q2728973 - no class (details...)
    Q2731847 - Important (details...)
    Q2743555 - Important (details...)
    Q2744842 - critical (details...)

    Patches from Microsoft Update (version 7.5.7601.17514 agent) install automatically. Latest installation: 03/04/2012-13:39:28, download: 03/04/2012 13:12:20, check: 04/04/2012 11:29:18.

  • Error Windows update cannot currently check the updates because the service is not running, you must start the computer, windows update services does not

    Original title: Windows Update service is not running / working and is not listed in services.msc

    When I go to windows update a red shield with a white cross appears and when I click search for updates this message appears:

    "Windows update cannot currently check updates because the service does not work, you will need to start the computer"

    * Restared several times-nothing has changed

    Despite what other threads have advised to:

    I checked in the services and WINDOWS UPDATE, Background Intelligent Transfer Service or encryption services are not listed!

     

    * I have changed the settings to "Never search updates" and then back to "install updates automatically" - nothing has changed

    * I ran the Malicious Software Removal Tool http://www.microsoft.com/security/pc-security/malware-removal.aspx- we say that everything was ok, but I can't always verify updates

    * I ran the download to reset windows update components http://support.microsoft.com/kb/971058/en-us but still I can not check updates

    (Nothing is in the update history)

    Am really worried!

    Thank you!

    Hello


    Have you made changes on the computer before this problem?
    Method 1:
    You can try to start the fix - it and check. Check out the following link.
    The problem with Microsoft Windows Update is not working
    http://support.Microsoft.com/mats/windows_update/
     
    Method 2:
     
    You can read the following article.
    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
    Note: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base. How to back up and restore the registry in Windows:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Note: If bad sectors are detected when running check disk utility and attempt recovery of bad sectors is verified during the verification of the drive for errors, data in the bad sector can be lost as they tried to recover bad sectors.

    Method 3:

    I also suggest that you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
    The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
    http://www.Microsoft.com/security/scanner/en-us/default.aspx

    Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.


    Important: When performing analysis on the hard drive if bad sectors are found on the hard drive when parsing tent repair this sector if all available on which data can be lost.

  • Cannot run Windows Update in Vista 64 bit Ultimate. Download popup that Windows Update cannot currently check the updates, because the service is not running.

    Windows Vista SP2 from worm 6.0.6002 Build 6002.  KB2675157 Explorer 9.0.8112.  Runing Norton 360 6.2.1.5 (I disabled the two virus checking a firewall).  My problem is that I ran Windows Update and go on a popup message: Windows Update cannot currently check the updates, because the service is not running.  I ran last update of Windows in April and he was properly executed.  I run FixIt 50202 and checked that wuauserv, misiserver, bits, cryptsvc, and workstation are started.  I am able to run updates on all the software outside of windows.  I ran recently updated for Radeon Catalyst Control Center, Safari, Chrome, and various Adobe products.  I don't have another PC with Vista I can compare the registry entries.

    Hello

    Method 1: The problem with Microsoft Windows Update is not working: http://support.microsoft.com/mats/windows_update/

    Method 2: Try to reset the Windows update components and check to see if the same problem happens: http://support.microsoft.com/kb/971058

    Method 3 :

    Try to set up your computer in a clean boot state, and then check to see if the same problem occurs.

    By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
    http://support.Microsoft.com/kb/929135

     

    Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

    Hope this information is useful.

  • Error "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer. "after replacing hard drive

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    Original title: Windows Update

    I've upgraded to a replacement hard drive, but Windows Update won't work now. Everything else seems OK.

    The error is: "Windows Update cannot currently check for updates, because the service is not running." You may have to restart your computer.

    I restarted the computer a couple of times and in respect of the Services runs it the Windows Update service.

    Operating system is Vista 64 bit.

    After the upgrade to the bigger hard disk, I found that the technology Intel Rapid Storage Technology driver should be updated. Once this is done Windows update ran properly. Microsoft Fixit did not help in this circumstance.

  • Error "Windows cannot check for updates because the service is not running.

    I am using windows vista 64-bit ServicePack two on my laptop. I recently had to install new hard disks. Since then, Windows update does not work. When I check the updates dialog box appears indicating that Windows cannot check the updates because the service is not running. I used the Microsoft fix - it tool, and it recognizes that there is a problem, but cannot fix. History of the update is completely empty. I would appreciate any ideas on how to solve this problem.

    Please read this article:

    http://support.Microsoft.com/kb/2730071/en-us

    Another suggestion is maybe disable the updates of Windows

    Reset.

    Activate the Windows updates.

    Try again. (Worked for some)

    http://Windows.Microsoft.com/en-AU/Windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=Windows-Vista

  • Cannot install message of updates that Windows Update cannot currently check the updates because the service is not running

    Original title: update Windows impossible currently to check updates because the service doesn't work (Vista 64)

    I get the message: ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "I rebooted without change.

    I have Vista 64-bit with installed MSE and it cannot update its virus database.  I have also Windows Media Center put up a TV and may not be able to download an updated Guide.

    Can someone help me please?  I just finished a full scan of Malwarebytes and a full scan of MSE - both in Mode safe mode with networking.

    I found a few other forums similar to my problem, but I don't know that they are the same as mine.  I'm a little wary about some of the suggested corrections, so I thought I would like to get suggestions directly related to my problem.

    Thank you!

    Hello

    1. what exactly happens when you try to download the update for Windows Media Center guide? Do you get any error messages?

    2 did you do changes on the computer before the show?

    Method 1: Run the update utility

    See the following site:

    Problems with installing updates

    http://windows.microsoft.com/en-us/windows-vista/Troubleshoot-problems-with-installing-updates.

    Method 2: Start services

    Make sure that the following services are started:

    a. Windows Update

    b. Background Intelligent Transfer Service

    c. Cryptographic Services

    To do:

    a. click Start, type services.mscwithout the quotes and press enter.
    b. double-click the service and under Service status click Start, if it is not started.

    Method 3: Reset the update components

    See the following site:

    How to reset the Windows Update components?

    http://support.microsoft.com/kb/971058.

    Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry .

    Method 4: Run the fixit

    See the following site:

    The problem with Microsoft Windows Update is not working

    http://support.microsoft.com/mats/windows_update/.

  • Windows Update cannot currently check the updates, because the service is not running

    Whenever I try to update my windows vista with the recent service pack more computer, it tells me "Windows update cannot currently check for updates, because the service is not running." I'm running it from my admin account and I was curious to see if the same thing was happening with my other accounts. When I checked the they were fine and ready to go except the said that i needed approval admin even if I was giving him. I tried to turn admins accounts, but he wouldn't let me edit them, neither could I make a new account in general an admin or a fair standard.

    Vista service pack 1

    Processor: Intel (r) Core (TM) 2 CPU 4300 @1. 80 GHz

    Memory: 2.00 GB

    Norton 360 is my security system but did not install til about 2 weeks after a period of 1.5 years without protection (I was a fool, my computer had never seemed all operate differently) so I feel like this may be a virus any causing this problem cause, no idea on how do I fix? Thank you

    Thank you Matt, what ive down to realize, it's I'll just do a pc reinstall (what does this DVD) I know itll mean the deletion of all but ive already backed up what I need/want to so ill be fine. Dell Web site gave me all the information I need on how to do it.

  • Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    Error message "WIndows cannot currently check the updates, because the service is not running, you may need to restart your computer.

    I am currently using windows 32 bit vist

    I rebooted, I changed the settings, I don't have a file called window update service in the service section to stop and start, I tried the fix programs, I'm out of ideas and I need help!

    Suggestions?

    Hello

    1. have you made changes on the computer before this problem?

    2. which antivirus app do you use?

    I suggest you try these methods and check.

    Method 1:

    Anti-virus software may conflict with Windows Update. You can temporary disable them and check the issue.

    Disable the antivirus software
    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software
    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

    Method 2:
    How to reset the Windows Update components?
    http://support.Microsoft.com/kb/971058
    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 3: If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

    Follow these steps:

    a. click the Start button, click computer.

    b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log
    Where 'C' is the drive of operating system
    c. delete the log file, and then restart the computer and check the issue.

  • Windows update error: Windows cannot currently check the updates because the service is not running

    Original title: Windows Update No. Longer - Vista business functions

    Last month my Win Vista will not update, little matter how many times I try to do. I always get the error message "Windows cannot currently check for updates because the service is not running." You may have to restart your computer. "Control via msconfig reveals that he is ticked as"running ".

    I run Microsoft Fixit has several times. It is said he has "solved" the problem, but it did not work. Of course there is a corrupted somewhere file that needs to be replaced.

    Please don't say no "update for Win 7" or "Reinstall Windows" because it's not just going to happen.

    Thanks in advance,

    Hello

    1. you remember to make changes to the computer before this problem?

    2. what anti-virus software is installed on your computer?

    Follow these methods.

    Method 1: Anti-virus software may conflict with Windows Update.  You can temporary disable them and check the issue.

    Disable the antivirus software

    http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

     

    Method 2: How to reset the Windows Update components?
      http://support.Microsoft.com/kb/971058
    Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

     

    Method 3:  If the methods above do not help, I suggest you delete the edb.log file and check if that helps.

    Follow these steps:

    a. click the Start button, click computer.

    b. now, go to this site: C:\windows\softwaredistribution\datastore\logs\edb.log

    c. delete the log file, and then restart the computer and check the issue.

    Well, it's going to be a long Chronicle, but in the end, the problem has been resolved. Please bear with me:

    Running the program MS Fixit in the past without success, I tried to run the update after you temporarily disable AVG, my program AV. no joy.

    I then ran CC Cleaner to get rid of some of 'dead weight '. I even used its registry cleaning option (which included saves).

    At that point, I did some 'household', & began to defragment my HD with Defraggler. But since it seems to take forever, I went to My Defrag, who finished the job much quicker.

    Although I tried to delete the edb.log file using method 3, I kept getting a message system which was unable to complete this action because the file has been opened in another program.  In the end, I was able to delete the file, but fact directly through Explorer. There also seems to be a sort of small file edb.log, indicating that it was a "recovered" version I deleted that one as well.

    At this point, I ran MS Fixit, who States that the Windows Update components needed to be fixed and proceeded to do so again. Because he had allegedly "fixed" my Updater in the past, I was not holding much hope that this time would be any different. So, after that what he has done, I was pleasantly surprised, I might actually start updating!

    However, the update message that a new version would be dl before I could go any further. So I did it.

    When the new version is started, it ran for about 10 minutes, coming with about 50 updates. According to flush out those who were of no use to me, finally I had dl and installed all relevant updates. And now, the update seems to work fine.

    Once again, my apologies for the long answer. But I wanted to tell the whole story, as I did not quite plan of RajithR.

    Thank you!

Maybe you are looking for