trying to replace xp home with installation installation complete but now won't finish

Similar Questions

• I am trying to upgrade my computer with the Vista SP2, but it won't work.

  I have download the standalone version of SP2 to Vista for the 64 bit OS, but it will not update I get error (0 x 80070002) FILE_NOT_FOUND. I followed all the troubleshooting tips and tried everything that was suggested, even update readiness tool, but it still won't work.

  Any suggestions, thanks!

  Free unlimited installation and compatibility support is available for issues related to Windows Vista Service Packs. Availability of support chat or messaging differs depending on your location. Some questions may require more support for which it has advanced a charge: http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP SP3 Home. Acrobat Reader XI installed with message Instalation complete but Acrobat Reader XI has not been installed.

  Windows XP SP3 Home. After Acrobat Reader X uninstalation I tried to install Acrobat Reader XI.
  Instalation completed successfully with the message "Installation complete", but is not installed Acrobat Reader XI.
  Any suggestion?

  Find the solution.

  I download my files from the download via Adobe page. Adobe - Adobe Reader: for Windows

  Adobe Reader has been installed.

• have replaced my HARD original with an SSD drive, but now my laptop does not recognize HP support assistant?

  Dear Forum,

  I replaced my original HARD with a SSD drive, but now HP support assistant recognizes my phone? The program runs but updates always fail and when I look at general specifications the serial number, product name, number of product, microprocessors, system memory, motherboard, bios system, drive hard (s), and optical drive (s) are all empty. Interestingly, it recognizes the device to display (s) as being mobile intel (R) HD graphics and current resolution of 1366 x 768 and refresh rate 60.

  My laptop is an Australian model HP DV4 3029tx, which is an intel i5 14 "(2ème génération) with AMD graphics 6750" I replaced the original 640 GB hd with a 180 GB ocz vertex 2 using acronis to clone the drive.

  I would be grateful is anyone know how to get hp support assistant to recognize my computer.

  Thank you very much

  Hello
  Try this: http://h30434.www3.hp.com/t5/Desktop-Operating-Systems/HP-Support-Assistant-not-working-on-Win7/m-p/736511#M34734
  I think that cloning might be the question because the original configuration has been changed. Simple uninstall and reinstall again could possibly solve the problem as well...

• I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. Any ideas please?

  I have a new mini iPad 4. I can't delete a game called Float that gives the message waiting. The cross and the oscillation with delete option appear, but it won't when I select Remove. I don't know how it came to be. Any ideas please? Thank you.

  First try a reset to see if it finishes downloading. Press and hold the home and power buttons until the Apple logo appears. Release the two buttons. Wait until the iPad tour starts on its own.

  Check if you can remove the application. If not go into settings > general > use iCloud and storage > storage > storage management. Wait for the list of apps to open. See if the float is on the list. If it is delete it from there.

• I am trying to download an application on my cable company, but it won't be over because my computer 'administrator' will not allow him. How to solve this. I'm the only person using the computer.

  I am trying to download an application on my cable company, but it won't be over because my computer 'administrator' will not allow him. How to solve this. I'm the only person using the computer.

  Start > run > control userpasswords2 > OK

  will take you to what you need to access and change permissions for logon not required

  On the users tab uncheck users must enter a user name and password to use this computer

  other options are available to facilitate access

  If a default administrator password has been entered it would probably be adminpass or empty field

  In both cases, it would be entered twice or white field, then move the cursor to confirm the blank

  as non-existent password then confirm white... you see an empty field is itself a password.

• I installed photoshop cs2 with the serial number, but now, photoshop will not open because no user name or serial number correct?

  I installed photoshop cs2 with the serial number, but now, photoshop will not open because no user name or serial number correct?

  Have you installed the special version?  You must...

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• Trying to Setup dual boot with XP and Vista, but Vista is stuck in a boot loop, error 0xc0000225

  Hello

  I have a Windows Vista Home Basic, and I wanted it to dualboot with XP.

  XP does not work very well, but when I want to start vista, its stucks after start the screen with the moving bar.

  When I try to start in safe mode it stucks when the drivers are loaded, and when I want to run the Startup Repair, it is said:

  Cannot start Windows

  0xC0000225 a required device is not connected or is not accessible

  I tried to run CHKDSK, but when I do its very long taking ~ 2 hours ~ but I have strength finsihed it completely yet. How long CHKDSK can take? And this can solve it?

  EDIT: CHKDSK has completed, but vista is still not start

  I have a Compaq Presario CQ60

  Thank you

  Original title: bootloop vista 0xc0000225

  Hello

  Method 1:
  Try to disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  
  Method 2:
  I also suggest that you do the startup repair using the Windows Vista installation disc and check if it works.
  If you have a Windows Vista installation disc, you need to restart (boot) your computer using the installation disc. If you do not restart your computer from the disk, the option to repair your computer will not appear.
  a. Insert the installation disc.
  b. restart your computer.
  Click the Start button, click the arrow next to the button lock and then click on restart.
  c. If prompted, press any key to start Windows from the installation disc.
  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.
  d. choose your language settings, and then click Next.
  e. click on repair your computer.
  f. Select the operating system you want to repair, and then click Next.
  g. in the System Recovery Options menu, click Startup Repair
  Check out the link:
  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions
  
  Method 3:
  You can also follow the steps in the article knowledge base provided and check.
  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529
  Check out the links to learn more:
  Windows Vista or Windows 7 unbootable, and the Startup Repair tool does not resolve the problem
  http://support.Microsoft.com/kb/934540
  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and repair startup issues in Windows
  http://support.Microsoft.com/kb/927392

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing required information".

  http://support.Microsoft.com/kb/927391

   

• Trying to update a copy of Photoshop CS5 with a legitimate code, but Adobe won't let me.

  Hello

  
  My company bought a copy of Adobe Photoshop CS5 and installed on a laptop that we use at our events. The laptop has aged over the years and we have disabled the copy via the Help menu, and then uninstalled. I installed the product on a new laptop computer and use the same activation code. The software installed fine with no problems but now I try to download updates and he sees updates and downloads them but when it comes time to install, it just says: "there was an error downloading this updates.» Quit and try again later. I am trying to install Bridge cs5 4.0.5 update, adobe extension manager cs5 5.0 update, photoshop 12.0.4 and photosphop camera raw 6.7. I do all this with Adobe Application Manager. The link they give me to contact customer service takes me here: error: "this serial number is not for a product calling it" | CS6 cs5, CS5.5,.

  I spent the time talking to help members through the online chat and they keep passing me around one person to another with different pretexts how they can't help. The last person has refused to transfer saying me that I need to come here for help.

  If you buy an upgrade, you get only a serial number. It is up to you to provide the second.

  But actually, just closely I re-read your original message. You have been sent to a message about qualifying products, but who are actually relevant to you? The problem actually only that you can't update your software, which is already installed and running? And Adobe sends you to a page of irrelevant?

  If so, download the updates separately and install them. Automatic update seems to have stopped working for mahy out-of-support products discontinued, but updates are always available.

• I tried to clean my pictures using the Rectangle tool, but now whenever I press BACKSPACE it gives me a box of filling instead of delete/cut what is selected. How can I fix it?

  

  You are on background, which does not support transparency.  -Precisely - expect the delete key to do?

  Fill with the background color?  Now the SHIFT key while pressing the delete key will do without raising the dialog box.

  Fill it with something else?  That's why you are presented with a dialog box.

  Make a layer of real image by double-clicking background so that it becomes a real layer, then press the delete key you give transparency.

  -Christmas

• How can I get a replacement XP Home Edition Installation/Boot CD? I have the serial number and the product key for Windows XP to my PC.

  I get a 'System32\HAL. DLL missing or corrupt file"and can not find my XP install/boot/the original disk implementation.

  treborzelaznog...

  Operation "System File Checker" might be worth a try, but it may require that the installation disc.

  You can read about it here...

  http://www.HelpWithWindows.com/windowsxp/HOWTO-24.html

  On a disc... replacement if your OS is a licensed "OEM" version, you will need to contact the manufacturer.

  This is a commercial version...

  http://support.Microsoft.com/kb/326246

  Good luck

• I tried to buy the terrarium with my gift card, but it says insufficient remaining store credit

  I can't buy terrariums with my gift card because it says insufficient remaining store credit

  So how is the app, and how much credit you have? You account for taxes?

• I am trying to create a dvd with windows movie maker, but my saved movies are in format ".mov" which doesn't seem to be compatible. How to convert files in a compatible format? __

  Changing format of movies '.mov' to the compatible format for editing movies using windows movie maker

  Changing format of movies '.mov' to the compatible format for editing movies using windows movie maker

  ==========================================
  MOV is the format QuickTime from Apple and the
  Software «QuickTime 7 Pro» allows to convert MOV files...
  (this is the commercial version, not freeware)

  QuickTime 7 Pro
  http://store.Apple.com/us/product/D3381Z/A

  Instructions for the conversion of the .mov files are on
  page 42 of the .pdf document
  "Exporting files with QuickTime Pro".

  QuickTime 7.6 user guide
  http://images.Apple.com/QuickTime/PDF/QuickTime7_6_User_Guide.PDF

  Or... you can use the following to freeware
  convert .mov files to .wmv format and
  import into Windows Movie Maker.

  Format Factory
  http://www.pcfreetime.com/
  John Inzer - MS - MVP - digital media experience

• Has tried to fix the wi - fi on El Capitan, but now no connection to all the

  I had problems connecting wi - fi typical (?) in El Capitan, especially during commissioning or wake from sleep. I tried to follow the steps described on http://osxdaily.com/2015/10/16/fix-wi-fi-problems-mac-os-x-el-capitan/ , but he has completely killed my wi - fi. I don't know how to fix or even go back to the way it was imperfect, but from time to time to work.

  • First of all, I highlight several aspects of the instructions on osxdaily which does not correspond to what I saw on the screen, especially since there is NO file called "com.apple.network.identification.plist" in the SystemConfiguration folder.
  • In addition, another site was already a different folder of com.apple.Bluetooth.plist out me and put it on the desk. Not sure if I should put it back.
  • Finally, the instructions on this site imply that we are not deleted what be it unde the DNS setting before adding something like 8.8.4.4 but I had something there already... a number starting with 196; He disappeared after that I removed the other SystemConfig files? I write to this DNS address, but I don't know the 'field of research"that was recorded on the right.

  I hope this information is useful. I need to get up and running right now, I am a teacher and school starts Thursday!

  I should add: wi - fi is recognized by he's other portable computers and iPad in the House; on my Mac Book, however, he does not even see most of the time!

• Replace the Canon MG4150 printer color cartridge, but now it will not print

  After having inserted a new cartridge color, printer doesn't print and screen says "treatment - please wait momentarily.

  Have you tried Turing the printer power switch and replacement of the cartridge? Have you tried a different cartridge?

  This is an original Canon cartridge?

  Since I can't find any reference to your problem on the Canon Web site, I suggest that you only contact Canon to get advice here:

  http://www.canon.co.uk/Support/Consumer_Products/contact_support/Index.aspx .

  (or your global region from Canon's site)