Trying to set up wireless for HP Deskjet 3054 A! Help, please!

Similar Questions

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• Try to download 14 items for a few days now and I get a message that says that I am not connected to the internet whenever I try. I tried all the troubleshooting solutions I can think. Any help please?

  Try to download 14 items for a few days now and I get a message that says that I am not connected to the internet whenever I try. I tried all the troubleshooting solutions I can think. Any help please?

  Suggest you contact Adobe

  Contact the customer service

• Where I am able to download the drivers for my aspire 5552? Help, please

  Where I am able to download the drivers for my aspire 5552? Help, please

  You can download it from http://www.support.acer.com/us/en/product/default.aspx?tab=1&modelId=3276 hope this helps.

• Windows 8 will not connect wireless for HP deskjet F2480

  I have a new HP laptop with windows 8 and tried setting to the top of my HP Deskjet F2480 printer by connecting the usb cable.

  The printer appears under "Devices", but it shows offline. Whenever I try to print something I just get a failed"" message.

  I know the printer works wireless as my previous laptop was working well. I checked the 'sharing' is on.

  I tried to download the drivers for Windows, but not luck.

  Can anyone help please?

  I'm glad you are printing.  Let me know if I can do anything else for you help.  Nice day?

• I'm trying to set up wireless.

  I'm going through my cable and he can not know

  Hi dennisseverson,
   
  -What version of the operating system are you using?
  -What happens when you try to set the wireless connection? You receive an error message? If Yes, indicate the same.
   
  As you did not mention the version of the operating system you are using, I have included the link to an article that is applicable for Windows 7 that you may find useful. Check if this helps you.
  Setting up a wireless network
   

• Im trying to set up wireless

  Hi all, I have purchaced a wireless router thomson tg585v7. Then, I found that my pc does not wireless.can I buy or download any adapter to change my wireless pc. I have windows vista Basic.  Thank you you.nicholas

  Yes.

  You can buy cards adapters/Wireless Wireless for your desktop

  http://www.google.com.au/search?hl=en&source=HP&q=PCI+Wireless+Card&Meta=&aq=f&OQ=

  http://www.google.com.au/search?hl=en&q=USB+Wireless+adaptors&btnG=Search&Meta=&aq=f&OQ=

  Read the info from Google.

  See you soon. Mick Murphy - Microsoft partner

• Unable to find software or driver for HP Deskjet 3054

  I really hope someone here can help me.  I use the HP Deskjet 3054 (-J610a), an all-in-one printer/scanner/copier, one a MacBook with OSX 10.7.5.  I downloaded all of the software available and updates from HP.  As I walked through the installation process, at the end he told me that I needed to set up a print to the printer queue and I could get the software to Apple for that.  So I clicked the button to say Yes and get the Apple software.  But whenever I do it (bunches of times) it tells me that Apple does not have the software, I need to get from HP.  But I can't find anything on the HP site that I have already downloaded.

  Is there a driver or something I'm missing somewhere?  When I click on "software & drivers" link above and find my printer, it mentions what I already downloaded and nothing more.

  I'm really stuck.  My printer does not print wireless or via the port USB until I find this software.  Does anyone know how to fix this?

  Thank you very much

  Lori

  If you still see problems after installing the package posted by Printdoc above you can also try the latest version of the complete software for your operating system:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=DJ-96583-8&cc=us&DLC=en&LC=en&OS=219&product=5109847&sw_lang=

  If none of those still fails with this error try resetting the printing system and then check for the difference:

  * Be aware that reset the printer system will eliminate any existing queue and reset all custom settings driver.

  Click on the Apple menu and then click on System Preferences.
  Select Print & Scan.
  Right click (or Ctrl + click) your product with the Printers list in the left panel and then click on reset printing system.
  Click OK to confirm the reset.
  Type your user name and password.
  Click OK. The printing system resets.

• I'm trying to update some of my Cloud Creative applications until 2015, but he repeated the error and the only code that is for me says - 55. Help, please?

  So about a month ago I updated my Adobe Creative Cloud system around 2015 and everything was fine... but when it comes to update individual applications some of them would update and others wouldn't. For example, Dreamweaver, prelude, Flash Professional, Media encoder, edge animate... whenever I try to update these applications it rpet installation error and I have to contact customer support. The only error code it gives me is (-55). I don't know what to do, I have uninstalled apps that are not updated and tried to reinstall, but it did not work. I don't know what is happening with apps, I've never had this problem before. Help, please?

  Error - 55 is a connectivity problem.

  N ° 1)

  Disable the Antivirus and firewall temporarioly.

  Step 2)

  (1) open the Control Panel and then click on the option "network and Internet" .

  2) click on Internet options, click on the tab "connections".

  (3) in the 'connections' tab, select 'LAN' parameters, you will be able to view the LAN settings box.

  (4) check the box-"automatically detect settings" and then "uncheck" all the other boxes as "configuration Script auto use", "Use a proxy server," proxy server ", then click on the ok button."

  6) click on the "Network settings" button once again, make sure that "Automatically detect settings" is the only option you select, the window of properties of LAN so clear.

  
  

  Step 3)

  
  

  Note: If you use Wireless / Wifi connection, if possible try with Ethernet wired Internet connection.  [Optional]
  

  
  

  Try to install the CC apps again.

  
  

  Always the same? /

  
  

  Try to install CC applications by using the direct link:

  http://prodesigntools.com/Adobe-CC-2015-direct-download-links.html

• OfficeJet 4500 all-in-one wireless WIIL NOT STAY online! Help, please!

  Help, please! I am incredibly frustrated with my officejet 4500 all-in-in-one wireless. my printer won't stay not 'online' and when I check my wireless network, the printer is listed as offline as well. When I try to print, I get the message "offline". I downloaded it on every possible driver update, scan and fix the hp program and even uninstalled and reinstalled this printer at least 8 times. I'm at my wit's end.

  I turned off the printer, and when it turns on, a document or two will show, then if I try to print something again immediately, I am again in offline mode.

  I also tried the 'hard reset' options I don't read here, but again, no luck. I changed both printer cartridges.

  I have coursed through the troubleshooter at least 8 times, and who never really helped. Cannot get a consistent performance. of course, at the time wherever I decided to ask for help, I'm out of warranty.

  I really hope someone can help me. I confess that I have very limited computer, so all suggestions, please use very simple instructions...

  Am I the only one having this problem?

  I'm sorry that you are experiencing this issue. It seems that your router is hitting the printer on the network. You can try setting a STATIC IP ADDRESS for her. This will have the computer and the printer communication directly.

  Here is a link that will help you implement. Let me know if you have any questions on it, or if that helps.

  http://support.HP.com/us-en/document/c02790693

  You can also reset you router. Unplug it for 30 seconds and plug it in again.

• BlackBerry Smartphones later Software Update for Bold 9700 PROBLEMS! Help, please!

  I know there is already a post on this topic, but this problem requires immediate attention.  Received an email this morning telling me there was an update of software available.  Plugged into the Desktop Manager and installed.  Went well until that right after the restart.  A frozen everything in closing the restart and from the restoration.  Now, all my data disappeared from my phone, I have no e-mail capabilities, no internet access, etc.  Now when I plug in the Office Manager he's just here saying that it connects to the phone, so now I can't even use a restore point to just run.  Right now I have a phone that has nothing of my data and can only make calls and send texts... might as well have a nokia from the old school!  I use this phone every day to work.  I need to work and so far no feedback of any type for a solution.  And of course you can not contact Blackberry via phone or chat to get help, who don't pee at all!  Between my phone freezing and having need of a hard reboot every day or so for the past month and now the matter today, I'm ready to think about Android.  That I hate because I love my blackberry.  Did someone's Blackberry out there listen to/read such things?  Need to get this fixed fast number.  Help, please!

  Sorry for the mixture to the top. It is under the common files, reasearch of movement, RIMdevice manager or AppLoader (I don't remember which folder). Anyway it must single .exe file and it is one that should be deleted. There is not any other .exe files in another folder. After that, I was able to connect to the Desktop Manager. Here's the adresse_web of a forum, I also found that may be useful. http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  I hope this helps.

• After that I did Disk Defragmenter to C I lost my files and setting up wireless for my windows

  After I did Disk Defragmenter to C I lost some information and files for my windows then my wireless does not detect all wireless networks its lost all the operating parameters of my adapter wireless (Atheros AR5005G Wireless Network Adapter) I need to get files and setting of cos its all lost and I couldn't update my antivirus (Microsoft Security Essentials) 0 x 80240022

  Hi jtm 8888.

  Try these methods in the order shown:

  Method 1: As a first step, update the network adapter driver by visiting the manufacturer's Web site.

  You can also follow this step to do the same thing:

  a. right click on my computer, click Manage, then Device Manager.

  b. double-click the type of device you want to update or change.

  c. right click on the device driver specific, you want to update or change.

  d. click set to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  For more information, see:

  How to manage devices in Windows XP

  Method 2: Follow the steps listed in this article and check if this may help you:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Note: The steps listed in this article are applicable to the other version of Windows XP as well service packs.

  Method 3: For problems with Microsoft Security Essentials, see:

  http://www.Microsoft.com/en-us/security_essentials/support/cf5220bd-3da8-4694-ac42-f5396ef5ff0b.aspx

• I'm trying to set the value for a textfield to an another textfield instance in a repeating subform

  Hi all

  I try to set the value of a textfield in a repeating subform/table row to another textfield in a subform that is repeated with the corrosponding instance number.

  The user has entered a list of key activities in the first part: - KeyActivityRow is the repeating subform.

  xfa.resolveNode ("form1. #subform. KeyActivities.Row1.Table2.KeyActivityRow.Cell2')

  -KeyActivityRow is the repeating subform-

  Who fills the corresponding occurrence of: -.

  xfa.resolveNode ("form1. #subform. ActivityTable.HeaderRow.Table1.HeaderRow.Cell1')

  -ActivityTable is the repeating subform-

  Kevin

  In the event of form1 calculate. #subform. ActivityTable.HeaderRow.Table1.HeaderR OE. Cell1 enter this script in any language: JavaScript:

  this.rawValue = xfa.resolveNode ("form1. #subform. KeyActivities.Row1.Table2.KeyActivityRow ["+ ctivityTable.index +"]. Cell2") .rawValue

  Kyle

• Trying to create a brush for watermark my pictures. Help!

  So, Im trying to create a brush to watermark my photos, but the predefined brush 'set' is not clickable, but it is clickable with any other picture I have try with. What I am doing wrong? can someone help me please? It is quite frustrating.

  

  To quote the help:

  Using any selection tool, select the area of the image to use as a custom brush. The shape of the brush can be up to 2500 x 2500 pixels pixels in size.

• Trying to get Essbase Client 11.1.2.3 for Linux 32 bit, need help please

  Hello

  I'm running a 64-bit RedHat Enterprise Linux 6.4 system and have an application that requires that the Client of Essbase 32-bit libraries to connect to a server instance Essbase 11.1.2 11.1.2.X.

  Go by reading the messages of the forum for the past couple days, I came to understand that Oracle Essbase 11.1.2 no longer ships a client Linux as a separate assembly, you must therefore install the complete Essbase server and then extract the files of the client out of that use.  So I'll try to get the correct bundle of downloaded files to the same get the installer to launch correctly so I can choose a minimum installation, including the components of the client, but I can't get correct zip files, I almost, but there is always some missing, and the instructions I found seem to refer to 11.1.1.X versions which have changed a bit in the 11.1.2.X version.

  Can someone please help me understand what still me get installation running and how to extract the client libraries?

  So far I have downloaded:

  2073792430 22 April 11:43 Apps-11123 - linux32.zip

  2440713397 22 Apr 11:46 ClientInstallers - 11123.zip

  554953827 apr 22 11:47 Essbase-11123 - linux32.zip

  171726540 20 June 09:08 FinancialManagementAnalytics-11123 - linux32.zip

  1053291166 22 Apr 11:52 Foundation-11123-linux32 - Part1.zip

  1603812256 22 Apr 11:53 Foundation-11123-linux32 - Part2.zip

  939688909 22 Apr 11:53 Foundation-11123-linux32 - Part4.zip

  1597577101 22 Apr 11:55 Foundation-11123 - Part3.zip

  1801831469 22 Apr 12:01 OSH-11123 - linux32.zip

  366584941 22 Apr 12:04 RA-11123 - linux32.zip

  BUT I still have the following missing assemblies, that I can't take into account:

  EPMINS-01001: one or more checks of preinstallation failed. Correct the errors before continuing with the installation.

  See assemblies: / home/ntruhan/Downloads/essbase/assemblies/biplus_product_reporting_client... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  Failed! EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/hfm_services... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/dbclient64... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/hsf_server... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/dbclient32... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/FDM... Not exist

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  Failed!

  EPMINS-01084: Assembly for linux32 platform is used

  / Home/ntruhan/downloads/Essbase/Assemblies/bpm_architect_services... Not exist

  / Home/ntruhan/downloads/Essbase/Assemblies/hsf_webapp... Not exist

  I'll go through the list of entries, but the only references I've seen so far have been for Windows downloads and it's linux and then Assembly linux32 messages there, but I need since I need right 32-bit client libraries?

  Can someone shed light on this adventure in the installation of this since all of the installation instructions I could see are for an older version conditioned differently?

  Thank you in advance,

  Nathan

  The best place to download files of EPM is compared to the clouds of software Oracle delivery - https://edelivery.oracle.com

  The files that you need will be sub - "Oracle Enterprise Performance Management System (11.1.2.3.0) Media Pack for Linux x 86.

  The files required for Essbase are:

  The system of EMP 11.1.2.3.0 for Linux x 86 Part 1 version

  The system of EMP 11.1.2.3.0 for Linux x 86 Part 2 version

  EPM System Release 11.1.2.3.0 part 3

  The system of EMP 11.1.2.3.0 for Linux x 86 part 6 version

  See you soon

  John

  http://John-Goodwin.blogspot.com/