Trying to solve an intermediate BSOD

Similar Questions

• I tried to solve the problems to the existing solution in this forum. I still get error 50405

  Dear,

  I use USB-6009 for controlling pumps, valves, and two Mass Flow Control. Each two cycle I get error 50405. I tried to solve the problems in the existing solution in this forum, but the error always showing each cycle 2 of the operation. I enclose my VI filled for the expertise, I was wondering if its design issue? Home shot of the error screen. Thank you.

  You have certainly a few design issues.

  The structure of stacked sequence tends to create more problems than it solves. I the have not used in new programs since version 1.2 of LabVIEW (in 1989). A state machine is a much better choice of architecture.

  Local variables can cause race conditions, copies of additional data, poor performance and it is difficult to debug code. There are special cases when they should be used, but these conditions are not in your code. Just wire directly on the terminals of control at the scene, the data will be used.

  My guess on the likely cause of your error is the use of several DAQ Assistant to perform the same task (with different data values) in each image in the sequence structure. With the arcitecture state machine that I suggested above, you would need one. The DAQ Assistant trying to be clever on the configuration and tasks of closing, but different instances do not speak with each other, so they don't know when to release the resources.  You might be able to do work if you used the DAQmx screw standard you have done with the task of digital output.  You do not connect the error lines of the DAQ Assistant for you can be missing errors.

  Indicators and controls without legend may be a troubleshooting nightmare. Please give each control and seeing a unique label. If you don't want the visible label on the front, you can use the properties of the control to hide. If you want multiple controls to have the same visible text for the operator, use the legend.

  Learn how to use subVIs. Most of the code in the 6 images of the structure of internal sequence is identical. By converting only a Subvi, you would reduce considerably the size of the diagram and if you ever need to modify the code, it should only be changed in one place - the Subvi.

  The while loop in frame 0 of structure of outer sequence is a "gourmet" loop He's going to run as fast as possible and seize all available CPU resources until the user presses a button. Put a wait function (ms) in the loop with expectation of ~ 100 ms. best, learn how to use the Structure of the event for user input.

  The second loop inside of the structure cases inside does nothing and can be removed.

  Many of these objects suggest that you have a programming background using the text-based programming language.  LabVIEW uses a paradigm of data flow that avoids largely for things such as the structure of the sequence and the local variables. I recommend that you work through the tutorials online on the Getting Started with LabVIEW.

  Lynn

• Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.

  Cannot install old set of 16 bits on new 64-Bit Windows 7. Tried to solving problems of compatibility without success. It ran OK on Vista, XP... all the way back to Windows 3.1.   Any ideas?  It is my wife's favorite.

  Hello giant,

  It is not possible to use 16-bit on a 64-bit computer applications/games.

  However, you can download and install Wondows XP Mode for windows 7. Later, you can install your 16-bit application in XP mode.

  You can download the application from the link given:
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  After back and let us know if it helped to solve your problem.
   
  Thank you and best regards,
  R uma - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Hel

  The volume of the recorded sound is very low when played. I tried to solve the problems through Control Panel of configuration-sound options and increased the volume to 100 form my mic too. All the other volume options, it's 100 too. It has no effect. Help needed ASAP

  Hello

  Control Panel - SOUNDS - Audio peripheral devices configuration-manager

  Make sure you write down the description and model double click top - tab drivers - write version. Now
  Click on update drivers who cannot do anything like MS is far behind the certification of drivers. Then RIGHT
  CLICK above and UNINSTALL - REBOOT - this will rebuild the driver stack.

  If your driver shows 06 you have the default windows and part of the question.

  Go to the system manufacturer's website and get the latest Audio/Sound drivers - download - SAVE - go to the place where you
  Put them - right click on Reboot - RUN AS ADMIN -.

  Check the Version on the tab of the driver in the device as a sound Manager often restoring drivers, then install
  the current version. Restart and check after each try, not uncommon to have to run the pilot of 1 to 4 times or more.
  Just make sure that the version you have installed appears in the tab of the driver.

  Then navigate to the site of the manufacturer of the device and search for the drivers more recent and repeat the installation procedure.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  ---------------------------------------------------------

  After the updated driver.

  Click with the right button on the speaker near clock - recorders - right click in the box - check show disconnected devices
  and show disabled devices - check your micro - highlight them, then lower right properties. Do
  of course the appropriate injector is enabled and check that other settings - on the levels tab make sure MUTE is not checked
  and APPLY / OK changes.

  Also in the search for some Audio Manager Panel (perhaps named after the manufacturer of the sound driver). Mine
  is the RealTek Audio Manager, yours can be quite different name if you have one.

  How to activate Audio devices hidden in Vista
  http://www.Vistax64.com/tutorials/143447-audio-device-enable-hidden-devices.html

  Connect one microphone, music player or other audio device to your computer
  http://windowshelp.Microsoft.com/Windows/en-us/help/b0e3d7fb-1b4a-4926-8254-65da289209261033.mspx

  Problems with sound and audio or no sound - a Mr Fixit
  http://support.Microsoft.com/GP/NO_SOUND

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Fix runtime error after trying to solve a problem of printer

  A program that was fine yesterday now displays the following error message:

  Runtime error!

  Program: C:\Sierra\CardZone\Planner.exe

  abnormal termination of the program

  This happened after Epson technical support was trying to solve a problem with the printer. UGH!

  You can replace the file execution somehow?

  Where is it on my PC (Vista)

  Is there a registry fix?

  IF I reinstall the software Cela will correct the error?  It must be a Windows file and not a software?

  Thank you.

  I'm so positive that she has nothing to do with my profile, because I have no problem with other software or programs.

  One last question. So, there is NO single file on my computer which can be replaced by a new version of a registry file that would take care of this?

  She seems to be just associated with a program that I think I'll quit smoking aid.

  Thanks for your time.

• BITS can not start (error 80246008), tried to solve it, received error 1079, please help.

  Hello

  I tried to update my windows service, but the BITS can not start (error 80246008). I tried to solve it using the suggested steps, however, got an error 1079 (account specified for this service is different from the account specified for other services running in the same process). I use Windows Vista Home premium version 6.0. Third-party antivirus software, I don't have online protection of Rogers. For the record, I'm not a technical person at all. Any help will be appreciated. Thanks in advance!

  I tried to solve it using the steps suggested,

  It's what you tried, if not, please do it might help

  See if anything here helps.

  Error 1079: the account specified for this service is different from the account specified for other services running in the same process

  If you receive this error message, follow these steps:

  1. Click Start, click Run, type services.mscand click OK

  2. double-click on Background Intelligent Transfer Service.

  3. click on the tab to open a session.

  4. click Local System account and then click OK.

  5. right click on Background Intelligent Transfer Service and then click Start.

  0 x 80246008 WU_E_DM_FAILTOCONNECTTOBITS A download manager operation failed

  because the download manager could not connect the smart Background

  Transfer Service (BITS).

  http://support.Microsoft.com/?kbid=910337>

  You receive an error message when you try to download updates from the

  Windows Update Web site or the Microsoft Update Web site, or when you

  try to start the Background Intelligent Transfer Service 0 x 80246008

  http://support.Microsoft.com/kb/916251>

  An update is available to resolve a Service outage of Intelligent Transfer (BITS) background on a Windows Vista-based computer

  http://support.Microsoft.com/kb/940520

  13:06:42 UTC 08/26/11

• Error trying to solve. + http + wifi

  Hi all

  up to now, am unable to establish a connection on the device. I have few things to understand before I go into details...

  (1) if the user has the APN settings, my application will connect to the Internet.

  (2) am using curve 8520 device, is not have APN settings, but it opens google and able to surf on the net. This means that the APN settings are only for applications to access the internet.

  (3) when I try to open my app Simulator, I got the exception "Error trying to resolve".

  the url is:

  "http://mypc5/BI/services/BIReport.asmx/GetChildReport?AccountId=12&Reportname=product_Report&Level=0&FLMasterDataId=0&SLMasterDataId=0&GroupItemId=0 &Rand=0;". = wifi interface.

  the exception is the following: I had the same exception.

  When I remove the suffix to the url, it is running in the Simulator. and in the device, I have exception "The Tunnel failed" .

  I used HttpConnection to establish the connection.

  Any help will be appreciated...

  A few quick tips:

  You asked

  "1) if the user is not APN settings, my application will connect to the Internet."

  A strand - review article and the vidoe and see how many ways there are for your application under connect to the internet

  You asked:

  "Am 2) using device curve 8520, is not have APN settings, but it opens google and able to surf on the net." This means APN settings are only for applications to access the internet. »

  A strand - review article and the vidoe and see how many ways there are for your application under connect to the internet

  You asked:

  "(3) when I try to open my app Simulator, I got the exception 'Error in trying to solve'. '.

  the url is:

  "http://mypc5/BI/services/BIReport.asmx/GetChildReport?AccountId=12&Reportname=product_Report&Level=0&FLMasterDataId=0&SLMasterDataId=0&GroupItemId=0 &Rand=0;". = wifi interface.

  the exception is the following: I had the same exception. »

  Hint - did you try cela in the Borwser, in fact any browser

  You asked:

  "When I remove the suffix to the url, it is running in the Simulator."and in the device, I have "Tunnel Failed" exception."

  A hint - see the section in the Thread that talks about what you can and can't do on the Simulator.  Also check the wire and the articles referenced to determine devices do when there is no suffix connection.

• Printer Epson NX 415, get a message saying something on the refill cartridges, but even when I tried to solve the problem, I was unsuccessful.

  I have an Epson NX415 printer, the problem I have is my arer of ink cartridges not recognized or fake messages saying that I need to replace a particular cartridge is correct. I tried the Epson OEM cartridges as generic in all combinations without success. Sometimes, I get a message saying something on the refill cartridges but even when I tried to solve the problem I was unsuccessful. I have tried all troubleshooting solutions on Epson web site without success.  Help!

  I hate to say it, but if you can't get help from Epson, it's probably time to buy a new printer.  It's a printer hardware problem or a problem of printer driver, and the two of them come from Epson, not Ms.

  Good luck.

• Fix for common problems associated with Windows Update repeatedly trying to solve the same problem

  When the machine running Windows Update on a Windows XP Professional (SP3 with IE8), the information for the download of the ActiveX bar does not appear. Tried to run the Fix for "Common problems with Windows Update" and it says "Windows Update components must be repaired. Difficulty-it short, reports of success, "Found Themes" saying "one or more components of Windows Update are configured incorrectly". However, still unable to download updates from the information bar does not appear. Repeating the difficulty happens with exactly the same problem i.e. reports etc. but no success still can not download the ActiveX on Windows Update since the information bar never shows up.

  At tried all the suggested solutions I can find for the reported similar problems such as checking the downloads ActiveX security settings, reset Internet Explorer settings, and even resetting Windows Update (Articlce ID 971058) components. Still no luck. Therefore, I am unable to manually check and download updates of Windows security.

  Otherwise my PC works well. Norton Internet Security is installed but did not prevent Windows Update to work on another PC I have. The information bar appears sometimes for other downloads, and it doesn't seem to be a problem on the Windows Update page.

  Please can you help. Thank you.

  No, I'm not not first uninstall IE8 (or IE7) before proceeding with the repair facility...

  Long history, technical, short version: do not uninstall IE8 (and/or IE7) before doing a repair installation (Windows XP only!) leaves the two Internet Explorer and Windows in a State of "confused" or "broken". Your only recourse now is a clean install of Windows (after backup your personal data).

  No, another repair facility won't solve the problem - even if you uninstall IE8 beforehand.

  Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to restore your computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636

  If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system

  Note: The computer must NOT be connected to the internet or local networks (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.

  Wish I had better news for you.  Good luck!

  PS: So that registry cleaners can solve some problems (temporarily, at least), they are not & cannot fix what caused the problem. Compare to treat a broken leg with a stick and a couple of BandAids.

• Print the following spooler & RPC:When instructions from Microsoft to correct the 0x000006ba error I then get error 1068. Have spent hours trying to solve this problem and support web Microsofts is not useful at all - please help - I just want to be able

  Print spooler 0x000006ba and 1068 error messages

  Try the instructions and links provided by the spirit in the following thread shows to see if they help (or differ from what you have already tried):http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/ef6ac932-a6cb-48cb-a56b-de5b1443df87.

  If this does not work, what is the manufacturer, the brand and the model of printer that you have (and all that you had previously installed)?  What version of Vista you have (for example, 32-bit Vista Business SP2)?  How the printer is connected (1 LPT, USB, ethernet, wireless, network,...)?  Please report the exact error messages you've been making word - that they can help us find the cause because there are reasons a bit that these things could happen and we have to understand the situation better than to offer a more targeted solution.  For example, what is a Lexmark printer (or have you ever had a Lexmark printer)?  There is a particular problem with these printers and a fix for the problem but I don't know if this is the case here and do not want to waste your time on something that does not apply.  There are other examples, as well.  We understand the situation, the better we can help you.

  I hope this helps.  If this isn't the case, please provide a lot of information that you can including the answers to all the above questions and anything else that you think might help.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• I tried to solve a problem with the removal of e-mails, but it did not work. What would be my next step to enable the removal of mail?

  I was unable to delete e-mails, so I tried to empty deleted messages, but he has also deleted the folder. I closed thunderbird, found this support and the post about the basket of profile files deletion.
  I re-opened thunderbird to locate records profile and noticed the deleted items folder and the files were returned.
  I closed thunderbird according to the instructions and deleted files from the Recycle Bin in profile files. After thunderbird restarts, the deleted items folder was still there with deleted messages, and I was still unable to delete any other msg or empty the tray without the record also becoming extinct.

  Turns out that my anti-virus was a scheduled scan and that he had found a virus in piece attached in my deleted items folder, so do nothing during the scan.

• I tried to solve this compound that happens but I get a window 'user account control', each time for permission.

  For awhile, he [Firefox] was not appearing when I clicked to let him go. I tried to fix it by right-click and do what he says but now - whenever I do an authorization Panel appears. I have to click Yes to continue and use Firefox...

  You are running Firefox in compatibility mode?

  Make sure that Firefox is not set to run as administrator.
  Right click on the desktop Firefox shortcut and choose "Properties".
  Make sure that all items are disabled in the tab "Compatibility" in the Properties window.

  • Privilege level: "Run this program as Administrator" should not be selected
  • "Run this program in compatibility mode for:" must not be selected

  Also check the firefox.exe program properties in the program Firefox (C:\Program Files\Mozilla Firefox\) folder.

• How to cancel a theme (owls)? I went to Firefox - there is no record add-on. I tried help solving problems.

  I added the OWL theme and I think it intrudes. I can not easily read the tabs, some screens have not the down arrow to scroll bar, no scroll from the bottom bar, and swipe feature does not work. Clicked on the Firefox - no record add-on icon. Tried the help - troubleshooting. Page comes up with all the details - have no idea what to look for. Also in the start menu, I now have Microsoft Silverlight. What is it attached to the theme?

  You can uninstall your current/Persona theme and go back to the default theme (Tools > Modules > appearance/themes).

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/uninstalling+Add-ons

• I handed to default seetings, trying to solve a problem, and lost vital links. How can I Re apply the old settings?

  I used the default reset, as he said he would fix most of the problems. My only problem was that my shortcut icon images have all been replaced with pictures of Firefox by default, suddenly, without known reason.

    Now, I have an even Bigger Problem. I NEED My Computer to run Easily, as I am Just a Novice, But Use It for work.
  

  I've been unemployed more of one year, until recently, and I can't afford to hire a professional for re - program again at this time, I did last year.
  I wanted Intenet Explorer as my homepage / default browser and he suggested that I use Firefox and then connected to use i / E as my home page.
  With Mozilla Thunderbird, I was bound to G-Mail.
  I see a shortcut icon, saying he has my old settings in the TI, but I have No idea how to re - apply the.
  I pray that someone can help me, please!
  I'm in big trouble, if I can't get my computer to it's simple one click to settings launch once again and may lose my ability to do my job at home, and my new job Thuis.
  I request here please.
  Please help me.

  Thank you, and blessings to all of you who can help you.

  Hello BDBell, see the following link how copying files between profile folders
  because now firefox create a new profile (with the reset option).

  If you cannot easily choose which files to copy, copy all the files to get your firefox like before you do your work, and then if you have any other problems, we are here to hear it and try to solve it.

  Thank you

• Silverlight plug-in does not work on firefox. Everyone tries to solve this problem? Customer service seemed to have no idea and kept me around brewing to other numbers

  work on iMac 10.6.8
  have you tried using Firefox and Safari with no luck... of the plug-in does not open.

  I uninstalled, rebooted, reinstalled and restarted will be no appreciable results.

  This is work-related and has nothing to do with netflix.

  Thank you

  CJL

  Hello

   
  I suggest you to send your request in the Silverlight Forums for assistance.
  http://forums.Silverlight.NET/
   
  It will be useful.