TuneUp does not go beyond the creation of restore point!

Similar Questions

• System Restore does not work despite the train different restore points

  Despite all the restoration in train points highlighted that it will not restore only get the same attempt to message one another restore point

  Garry

  AVG does not normally interfere with the restoration of the system.

  Is set up to create computer system restore points?
  http://bertk.MVPs.org/html/missingrps.html

  Why can't you just uninstall programs you put on the computer? I assume you mean programs when you refer to "stuff"?

  What is your computer brand and model? You have a Windows XP CD? What is a Home Edition or professional?

• System Restore does not allow me to create a restore point

  sys restore does not allow me to create a restore point

  Hello

  Please ensure that you follow these steps:

  1. System opened by clicking on the button start , by clicking on Control Panel, clickingSystem and Maintenance and then click System.

  2. In the left pane, click System Protection if you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Click the System Protection tab and then click on create.

  4. In the System Protection dialog box, type a description, and then click on create.

• My desktop with W7 home premium HP computer does not start beyond the initial screen of HP.

  I had been doing "Master Boot Record error press any key."  for the latest two boots.  Press any key boot the computer and initialized in W7.  But, when I tried to start the computer again, he did not get beyond the initial HP screen with choice... F10, esc, F11, F12, and F9.  By pressing the keys are not going anywhere.  When I pressed ESC, I got "Loading Boot Menu... ', , but does not load the start menu. I tried to boot from a DVD, but the DVD/burner burner did not run.

  When the computer is turned on, the fire HD came a few seconds... .but then nothing.

  Solution?

  Thanks again, Hanspuppa.

  I found the problem.  I removed the CMOS battery and reinstalled.  It seems to work OK now.

• Win 7 does not start after the creation of new partition for fileswaping.

  Hello!

  As the header says, Windows 7 does not start. Made a partition to swap files between OS X and Windows 7.

  I saw in a thread that it could be repaired using fdisk. I'm really new to OS X, so I did not really

  know what to do. Writing the result of the controls, I found in the thread.

  I know now there is a warning to the partition AFTER installing Windows.

  Would really appreciate if everyone took some time telling me what to do!

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage MacBook Hoveddisk 382,5 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database FILDELING 16.6 GB disk0s4

  5: Microsoft Windows HD 100.0 GB disk0s5 data base

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 382,2 disk1

  Logical volume on disk0s2

  AD4E7A3F-9F8E-4734-8B4B-B65587CDD2A1

  Unlocked encrypted

  Fdisk/dev/disk0

  Disk: geometry / dev/disk0: 60801/255/63 [976773168 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-409639]

  2: AC 1023 254 63 - 1023 254 63 [409640-747116216]

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [747525856-1269536]

  4: 0 b 1023 254 63-1023 254 63 [748795392-32403968] Win95 FAT-32

  TPG - v - r see the/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500107862016; SectorSize = 512; blocks = 976773168

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 747116216 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  747525856 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  748795392 32403968 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  781199360 262144

  781461504 195311616 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  976773120 15

  976773135 32 table dry GPT

  976773167 1 dry GPT header

  Please after the release of

  sudo dd if = / dev/rdisk0s5 account = 1 2 >/dev/null | hexdump - C

  You see the Windows files in the volume of training using the Finder?

• Laptop does not go beyond the the BIOS splash screen

  Hi, I have one of these laptops the DV6000 feared. He died a few weeks ago (powers to the top, but nothing on the screen) and this weekend I did the heat gun reflow. In any case, which seemed to be "fixed." Now, here's the problem. When I turn, I see the splash of HP screen and options for F10 (enter Setup) or ESC for boot order. If I press F10, it will say "Please wait" as it tries to enter the BIOS Setup but nothing else happens. If I press ESC, it tries to start but only happens to a screen that indicates the version of BIOS, DVD/RW model, model of hard disk, etc. It does not start in Windows Vista.

  Now, if I take the hard drive, I can enter the configuration of the BIOS without any problem. If I use a Ubuntu installation DVD disc, I have Ubuntu load (from the DVD player) without any problem. I am at a loss. Any help would be appreciated.

  Thank you!

  It solved! I had to remove the HARD drive to get into the BIOS. In the BIOS, the native SATA setting must be disabled. Again, this makes no sense to me, but to save this setting and rebooting... success! My laptop lives. DavidPK, thanks for your suggestions.

• System Restore does not start and the creation of a shadow copy times out

  What should I do if the system restore does not start, when creating a shadow copy times out?

  Hello

  Thank you for the question to Microsoft Community. I'll give my best to help you.

  1. don't you make changes to the computer before the show?
  2. What is the accurate and complete error message you get?

  I suggest you try the steps suggested by Gokul T on September 8, 2010 and see if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/system-restore-will-not-start/16c201d3-3932-40e4-883C-502f701b077f

• BlackBerry Pearl 9100 Smartphone does not go beyond the initial start-up

  I recently downloaded the BBM updated version and rebooted the phone, which made the phone completely useless. It does not start, everything is blocked to the Blackberry first loading page with the bar display 100% of State.

  Please help urgent that this phone is my life line

  Launch the BlackBerry in safe mode and go to Options > Advanced > Applications and delete that last charge (BBM) application, then restart the machine in normal mode.

  ***********
  Article ID: KB17877 how to start a mode BlackBerry smartphone without failure http://www.blackberry.com/btsc/KB17877

• Zip7 program does not go beyond the installer

  I have ddownloded the Zip7 program for resizing photos files or folders. The down loaded 'install', ut every time that I try to "run" the program, the fact is reinstall the Setup program.  I don't know what to do.

  Maybe a corrupted download, download another copy and see if it works.

  Troubleshoot Windows install

  2438651 how to solve problems that may occur when you install, uninstall, or upgrade a program on a Windows computer

  http://support.Microsoft.com/kb/2438651

  Substitute:

  Unregister Windows Installer and then reregister Windows Installer. To do this, follow these steps:

  1. in the menu 'Start', click on ' execute:.»

  2. in the "Open" box, type "msiexec /unreg", and then press ENTER.

  3. in the menu 'Start', click 'run '.

  4. in the "Open" box, type "msiexec/regserver", and then press ENTER.

  If this is insufficient, the I would say to install the Windows Installer Cleanup utility and run that to remove the Java remains Setup files that can cause problems with your current installation.

  For more information, visit the below mentioned link:

  http://support.Microsoft.com/kb/290301

  ------------------------

  Click Start Orb, in the box, type search: Regedit.

  Highlight: HKEY_lOCAL_MACHINE/SYSTEM/CurrentControlSet/services/msiserver

  Verify that the SYSTEM account has full control. If it does not, add the SYSTEM account with full control.

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

• LiveCycle ss4: a textfield does not extend beyond the second page

  I am using livecycle designer es4 (first instance, before I used livecycle are 8.1, which came with adobe pro 9)

  I understand how to develop a textfield, however if people who want to type a lot of text beyond the page the whole textfield is placed on the other page.

  Sometimes, it creates even 2 empty pages before the textfield object.

  Would be nice if she continued dynamically to the next page without skipping a whole page or 2 pages at a time.

  Any help would be greatly appreciated

  You have wrapped the text box on a subform? If Yes, then you must have the option 'allow the page break in content"checked for the subform also?

• Get Photos 'from files and folders"does not work beyond the letter 'G '.

  I have PSE - 7 is installed in Windows 7 64 bit. The program seems to work fine except for this:

  I have a very important folder; (141 GB, 2 500 files, 207 000 files) The command 'Get Photos from files and folders' stops working in the middle of the letter 'G'...!

  I have the same folder in a machine running Win XP, and both PSE 5 and 7 PES do not exhibit this behavior. Can I import from any letter of the alphabet...! (LOL)

  The catalog associated with this installation file has been optimized and recovered.

  This folder is located on the "G: /" drive (volume).

  HARD drive "G /: ' has been fully formatted (not a quick format).

  The only exception may be the way things should have been done, is that the catalogue was opened under the drive letter and the serial number of the drive.

  Using the drive letter, this catalog open immediately. Any ideas...?

  I learned that from the PSE 6, PSE uses the serial number of the HARD disk and not the letter of the reader to access the content. However, a catalog will still open and register correctly, using only the letter of the drive from it's previous machine. (Note that this is the same behavior as earlier versions of PSE, such as PSE-5, which depended only on the drive letter).

  --> When we say that the ESP is not dependent on the drive letter to access its content, it doesn't mean that the PSE will display the serial number of the HARD disk in the application. In this case, you have changed the drive letter from E to F, PSE media will not suffer.

  I'm usually import a whole folder. Until the letter 'G', PSE - 7 works as expected. The photos appear in the organizer and are accessible in all directions. After the letter 'G', it is impossible to select any folder inside the dialog box «Get the folders of files and folders» When the element is highlighted, the letters blink and change for other mailings, then selection resets nothing selected. After 'G', I have to use the, command "Get pictures by the research. This works as expected. Once the pictures are inside the Organizer, everything is as it should be.

  --> This is a known issue. Simply select "All Files" in the "File Type" drop-down list present in the import dialog box. After that, it will work very well.

  Just to sum up PSE6 or PSE7 are not supported under Win7 so you could face some issues.

• Computer backup button does not appear in the "backup and Restore Center window.

  Hello!

  I've seen some computers that are running Windows Vista Edition home premium 32 y 64 Bits I can't do a "computer backup" in case I have to restore the computer from an Image made by this process because the "Computer backup" button is not in the "backup and Restore Center window.

  As you can see in this link:
  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  You can see 4 buttons, I only see 2:
  -Backup files
  -Restore files

  Y at - it an update that makes these buttons appears in "Backup and Restore Center Window" or is the Version of Windows or of what it is. I find no answer yet.

  Thanks for any help!
  abasilis

  N °

  You have the right version of Vista and there is NO update to change, but you can BUY a Vista Upgrade operating system...

  http://www.Microsoft.com/Windows/Windows-Vista/get/Anytime-Upgrade-overview.aspx

  Upgrade Home Prenium to ultimate.

  http://www.Microsoft.com/Windows/Windows-Vista/features/backup.aspx

  Explore the features: Windows backup center and restoration

  If you read this link, that it is said that you can NOT make a backup of the computer in Vista Home versions.

  You need 3rd Party software to do this:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  See you soon. Mick Murphy - Microsoft partner

• Windows 7 backup works, but does not appear in the backup and restore control panel

  I have Windows 7 Pro and have had a running backup on a network drive for a couple of years now.  So far it has worked well.

  Recently, my wife asked me to postpone this off-peak hours and I went directly to the Task Scheduler and update annex it.  I also had to modify the scheduled task to wake up my laptop computer to perform the backup.
  Now, after making these changes, I can see the event log that the backup started at time exact (01:00) he succeeded 30 minutes later.  I can also see on my network drive that it saved at the right time and the registry keys indicate the location of the network right.  However, when I go in the backup and restore control panel, he told me to "backup Windows has not been setup" (which previously he would show me the network location and the last backup time and the other at the request of autonomy.)
  I know that backups are still viable can I do a restore to the correct network location and properly, it shows me that I have backups on this drive.  So, why the backup and restore screen is now showing me that no backup copy has been put up any ideas?
  I'm a little worried that this change to the schedule has whacked a key somewhere that is using the backup and restore screen and finally the backups will fail and I don't notice unless I am constantly reviewing the event logs (which, for domestic use, isn't it convenient for me).

  Tim,

  You can find this useful thread.

  Fake message "Windows backup has not been implemented":
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/d4b64dd2-CD98-4d51-97F2-1cc7865c6886

• Explorer.exe does not start at startup, and it does not display beyond the logon screen?

  I have a friends Compac laptop and he managed to stop loading explorer.exe when starting after logon is complete. I can't for the life of me remember what I have to do to restore this process in the startup routine so that his office will be in charge. He has an extraordinary number of startups, but he managed to remove this (essential) program, especially in lists of useless junk that is responsible.

  It's a compact with an Intel processor running Vista and of course it doesn't have the ERD. There is a recovery on the hard drive partition and if I knew how to use it, maybe this would a repair option, but I'm not clear on how to use either because there is no literature or what he had with the computer. By way of explanation, he is a foster child and had been tossed around a lot, so it's not too surprise that it doesn't have any of these materials.

  Go to this site and download the tool in a removable device like flash memory:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  And then start your PC and press the F8 key repeatedly and start in safe mode and then run the tool of flash and complete analysis of the system memory.

• Sound does not work after the creation of DVD

  When I saw my movie in still the audio works but after that I have export to DVD, it no longer works. Any ideas?

  Thank you

  Chris

  Well, you've done most of the things I would say. This individual WAV would be high on my list.

  This leaves wondering what brand of blank media are you burning at?

  Also, as a test, you can burn the file and then play this folder with DVD playback software? How does it work?

  One last thought, your audio is connected to your set-top player, or whatever it is you are testing on. Please don't laugh, as has happened at least two other posters over the years.

  Good luck

  Hunt