Tungsten E2 - Vista - problems of funds. New Palm and Desktop?

Similar Questions

• WMC in Vista 32 bit premium new Hdd and netflix connection failure.

  OK I've never had this junk happen before, so I'm asking for help.

  I have win vista 32 bit home premium 4 GB of mem and a brand new 500 gb Hdd and WMC is not leting connect me to netflix.  What is the problem?  Everything else works fine.  The thing is to be a real P.I.A. on this topic too.  Telling me my network connection is down when I was using WMC to net stuff just before.  I have not logged into Netflix using my browser and even my PS3 no problem at all.  I used another computer and had no problems ether.  Where the question of what is the problem.  The only new thing is a new hard drive all software is EXACTLY the same as on my old Hdd.

  Hi Ghostwolf8,

  ·         What happens when you try to connect to Netflix?

  ·         You receive an error message?

  ·         What web browser do you use?

  ·         The problem happens with Netflix only?

  I suggest you to uninstall and reinstall Netflix as well as the silvery light and check if it helps.

  http://Silverlight.NET/

  Reference: http://support.microsoft.com/kb/972496

• Strange problem with the new ca and on Satellite M45 mouse adapter

  Hello

  Recently, my adapter had problem with load the laptop (model M45-S2692), so I bought another card. The new adapter has worked for a few months and now its behave differently.

  If I plug the adapter into the laptop, the mouse does not work and works otherwise.

  Does anyone have an idea on what could be the problem.

  Please advise.

  Concerning
  Suri

  Hey Buddy,

  Therefore, may I ask if the adapter that was purchased is an original toshiba AC adapter? Why didn t contact you a servicepartner, since they had probably had your sector-free adapter because you have something called guaranteed.

  How Don t you know the adapter you have, there where he knows do not so it s original or not, do not damage anything on your motherboard for your machine.
  Maybe it has nothing to do with your power adapter...

  I would appreciate comments on your part just a small one description which CA is, when you bought your machine and if the error could be reproduced with the removal of the AC.

  Welcome them

• Win 8 problem with my new microphone and audio!

  Hello guys! I recently bought a headset of game G230, very good hardware, but when I asked it on the knees, it did not work very well, I see my reading devices (I have attached a picture) sound not really from the gameset but speakers, when I switch off the speakers and keep only the helmet, no sound at all even you comes from the sound of the speakers, it says that I hear in fact from my helmet G230!

  It's one.

  Two; When I click my button mute in my keyboard, the sound is not cutting it anymore (started after I put the G230) and it continues to work on

  

  I tried to make device by default, it's okay! same problem

  Hello

  Please keep us informed of the issue and the information provided.

  You can also check for any error in the device for the audio, video controller driver and game Manager and write to us. Please follow the steps below to see.

  (a) press the Windows key + X Key on desktop.

  (b) select the Device Manager.

  (c) expand sound, video and game controller.

  (d) check if there is no error (! sign) or (?) Sign).

  Please follow the steps here to adjust the Microphone audio output by default.

  (a) right click on the volume symbol present on the bottom right.
  (b) select sounds, click the readtab.
  (c) in the list, click Microphone , and select the default value.
  (d) click on apply and OK.

  Run Audio troubleshooter.

  Please follow the steps below to run the troubleshooter of Audio playback.

  a. press Windows + W key on your desktop.
  b. write Troubleshooting in the search box in the upper right.
  c. Select Troubleshooting obtained after the search.
  d. Select all the option to display in the left panel.
  e. Select Audio playback option.
  f. click Next to perform the Audio Troubleshooting and follow the steps.

  Get back to us with the current state of your computer and we will be happy to help you.

  Kind regards.

• Weird Audio problem since installing new SSD and reinstall the OS and the upgrade of Ram

  I have a really strange problem in first (well the same thing happens with native files outside the first he too!)

  Some of my corrupted .wav and .wma audio files. At first I thought it was a buggy project file.

  Then I checked some other files of the projects waiting to be done and they were the same time of a heart attack.

  So I copied the apparent bad file to my laptop and it plays very well!

  Then when I check some audio files of the projects finished on my PC they sound corrupt too! And of course, they were very nice when I actually finished projects.

  I have tried in the first CC2014 and CS5, but it is not the program that I know now.

  I googled "Audio codecs Windows7" but all the options appear to be malware, someone has any ideas? Y at - it a codec pack that I could try?

  I am running Win 7 Pro

  I7 960 @ 3.2

  24 GB ram

  NVIDIA GTX 480

  Thank you

  Ronan

  Had this sort.

• Internet Explorer problems in the new site and product views

  Well, I'm stumped.

  We just launched a redesign of a site (www.geniefilters.com) and I am getting a strange vision of our product catalogue displaying in Internet Explorer on a PC. (The site was created on a Mac, with a site of BC model).

  Products display in 3 columns, but in IE, only the left column shows... and no, the elements are not forced down in a single line. Show only products that would normally appear in this column. Article 1, point 4, 7, 10, etc...

  The catalog was created in module purchases in Colombia-British models and seems very well seen on a Mac. It works as well on a PC, using Google Chrome or Firefox.

  I couldn't someone else to watch the pages and let me know if they identify a problem? Or is there a problem with IE, that I'm not aware?

  Thanks in advance,

  Chuck

  Hello

  The use of the debugger in IE9, stop table.productTable td {width: 100 %} in ModuleStyleSheets.css makes appear them - IE is not allowing you to have 3 columns of the table at width of 100%.}

  Hope that helps.

  Steve

• BlackBerry smartphones "BOLD" problem Calendar Sync with PocketMac and Desktop Manager 4.6

  # The RIM case: 5499753

  I have 4 email addresses attached to my BB "BOLD".
  When I go into Options / Advanced / Default Services / calendar, I have 4 entries (all e-mail addresses).

  If I go to calendar, Options, there are all of an additional entry in "Default device" 4 as well as e-mail addresses.

  Regarding the calendar by address entries, it is divided as follows:

  Email 1) 1
  E-mail 2) 0
  Email 3) 50
  Default device) 38
  Email 5) 0

  When I try to synchronize, the desktop software sees only the #3 email that is my rogers.blackberry.net with 50 entries and sync in Outlook, resulting in a loss of events in my Outlook on my desktop. All events are still in bold.

  I can not also move all the elements of the default device and assign it to the category E-mail no. 3, which reduced from 38 to 37 and from 50 to 51.
  Once you have received an entry on the device, you cannot change the e-mail addresses associated with the event.

  Removing the servicebooks (CICAL all) the default device entry has the combined entries.

  Once the service books are sent to the device, it then splits them again.

  This seems to be a problem with the Blackberry "BOLD" operating system, or a problem of service book (since when CICAL service books are deleted, calendar entries all combine for peripheral list by default.)

  This also happens on WinXP with 4.6 DM, is not platform specific.

  OS: 4.6.0.125 & 4.6.0.134 tempted.  Both have the same result.

  Just got off the phone with RIM support.

  Here is the procedure:

  All backup data

  Do a thorough cleaning (Options, Security Options, General settings)

  Content compression set to disabled

  Save the settings

  Return to the General settings, Blackberry press button and wipe Handheld.

  Load DM and go to the backup/restore, advanced.

  Load your backup file.

  Restore only the peripheral calendar (drag the calendar on the right)

  You should be able to see in the calendar options, device default calendar with all the entries.

  Synchronize in Outlook.

  At this point, you should have all your entries in Outlook.

  Hard Reset (press left ALT + SHIFT RIGHT + DELETE and hold the button until it restarts the device)

  Go to the website of your provider BIS and remove all the entries that you want as the default calendar.

  Set the date and time on the device.

  Turn on the wireless Radio

  Return Service directories from the BIS website.

  Go to Options, advanced, default Services.

  Set default CICAL (this should be the one you really want to like the calendar by default and the only one on the device).

  Set the default CMIME if necessary.

  Add the e-mail addresses that you deleted on the BIS website.

  Return service directories.

  You should have all your e-mail addresses and no. peripheral in your calendar, by default.

  All entries in the calendar should be associated with the address you chose as the default value.

  Resync using DM.

  Note - PocketMac 4.1.25 is not supported with the "BOLD".

  This creates blockages and major sync issues.

  I have run this procedure from a computer running Windows XP with Office 2003.

• Sync a Tungsten C and VISTA problems

  I use Desktop by Access ver.6.2.2. The loaded disc, sync seems to work, and still nothing showed up in my caldnar or address book. Category: all the
  Name on the Palm is the same as the username in the desktop
  The files seemed to be placed in the backup folder.
  User account gives my name and my Tungsten C device.
  I know that the data is in the tungsten c.

  How can I get the data to show the software to the screen? Alternatively, it is a 'feature' to simplify my life?
  Robertr

  Message relates to: Tungsten C

  I could not get a driver working between the Tungsten C and Vista, but I managed to synchronize

  the device via wi - fi with Palm Desktop 4.1.4e.  I have tried both an ad - hoc network

  between my Palm and mobile, but also an infrastructure using my home network

  router.  The ad - hoc network has been a bit tedious, I had to turn on internet sharing

  on the Vista computer it would take on a private IP 192.168.0.1,

  and then I had to manually set the ip address of tungsten under

  System->Preferences->Wi-Fi->network:->Edit Netorks...-> change...-> details...-> advanced...-> IP address :-> Manual

  Then in the when I bring up the Hotsync Panel on tungsten, I select "network".

  and enter the ip address of the vista machine and then the hot sync.  He

  seems to be some problems with the VersaMail, which I don't use anyway, so I disabled the

  the synchronization of this request.

• Migrating from a Plam T E2 to a 'New' Palm T E2?

  OK - market on another level... I have several reconditioned Palm Tungston E2 I bought off Amazon... and will have bad sync for the 'new' Palm.  Palms are the same exact material - all Tungston E2.

  The instructions on the web site of HP/Palm to install the software that came with your handheld ' because the E2 a code as the handheld 'needs or something to that effect.  I don't know if it's the 'specific hand who held' or T E2 series.  I did it with a single device several months ago and it worked but was a lot of gymnastics.

  I tried once again to migrate to still a 'new' pocket computer and could not run - and nor would my only "current" synchronize plus or - on a Vista PC.  However, I hooked the ' one up via the USB port on my old XP PC which had given at least years and he left sync'd beautifully!

  Can someone tell me if I have to re - install the software from the disc - really?  OR could I just do a "" Desktop replaces handheld ' on the most recent Pocket? "  One thing... maybe I need to use the disk to put the user name on the new hand.  I tried it (on Vista he) & after a couple of times the software does not work do not let me even access the topic 'material set up' to name the new hand.  And the new pocket computer does not have the username added to it and it would be even more is in contact with the Vista.

  No idea what I am doing wrong?  I'd like to just uninstall everything on the desktop and reinstall Palm Desktop 6.22 on the HP website and start again... and do a hand replaces desktop. . but I don't know if it will work more.

  I guess my real preference at this stage would be to run the old Windows XP machine, so I I can use Documents to go Version 8 (which works with the E2 T) as well as with the Palm Desktop (and of course Agenda 6 of Pimlical).  But I need to get my user name and the data on the 'new' E2.   I have the mose current Palm Desktop aready on this XP machine. Yet once, I followed the instructions on the HP website to do all this on the Vista... but there is something (I'm) missing!

  Thanks in advance for the help!  Deb

  DebWalker wrote:
  

  Hi WyreNut!

  Sorry for my LATE reply to your reply... flat other computer problems - which are now corrected.

  So are you saying I can reset the new E2 just hard, then sync it and the synchronization process will ask you a user name because he is not a (still) on the new E2?  No need to run the installation disc?  I just want to be clear.  What I have to do a 'Desktop replace hand held"in sync, implemented?

  OK - Thanks again for the help!

  BTW - my plan of choice now is to synchronize with a portable old XP I where all the features of the thin Palm wokred!

  Yes, when make you a good Hard Reset of a Palm device, then perform the first HotSync, Palm Desktop will give you the opportunity to create a new account, or using an existing one.  When you take existing, all data will be flowing to the new device.  Yet once, back up your important data is recommended before attempting this.

  You can set the lines to crush the Hanheld if you wish, but this is normally not necessary.

  The installation disc is not necessary.  If you run it, Palm Desktop 4.x will be installed and cause confusion.

  WyreNut

• Picture of Palm and Tungsten E2

  I recently bought a PalmTungsten E2 (Palm OS Garnet v.5.4.7). When I tried to enter pictures & Video I got the following message: the application cannot be launched because it lacks the location information.
  I checked on the installation disk and tried to install again and again and nothing happened. Could someone help me. Thank you very much.

  You're sync'ing the E2 for the same user in Palm Desktop as the T2 name?
  If you are, this will cause problems on the new device. When you synchronize the device, it records the device settings, applications, 3rd party, preferences, etc. in the backup folder in the folder on the PC username. When you synchronize the new device it copies the content of the backup for the old device folder in the new device. This will cause corruption in the settings of the new device, which causes erratic behavior of the new device.

  You may need to reset your device and rename your backup folder. Go to http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=887 and follow the directions to do a hard reset. Then before of you hotsync your data back you will need to rename your backup folder, to do than go here.

  XP
  C:\Program files\palm or palm one\ [hotsync username]------and rename your backup
  file Backup.Old

  Vista
  Start--> documents\Palm OS Desktop\ [hotsync username]------and rename your backup
  file Backup.Old

  Then hotsync from your current name of hotsync and all your contacts, calendar,
  tasks and memos coming back.

  Show the file extensions for XP or Vista

  XP
  If you cannot view the extensions of file on your PC I would you open a
  folder, go to Tools--> Folder Options--> View (tab) and under Show hidden
  files and folders to uncheck Hide extensions of known file types.

  Vista
  Open control Panel, go to--> View (tab) and under show hidden folder Options
  files and folders to uncheck Hide extensions of known file types.

  Click on the following link on the site kb.palm.com for the article about upgrading from a previous Palm OS in your pocket. When you upgrade, you must follow a procedure of article.

  http://www.Palm.com/cgi-bin/cso_kbURL.cgi?id=12926

  Message edited by cygnusX1 on 09/04/2009 13:27

• Equium A200: impossible to get Vista installed on the new HARD drive recovery

  Hello

  After a failure of the HD I bought a Toshiba no AF HD which is defective
  Now that I had to buy a replacement HARD drive that is a player of AF but no matter how hard I try, I can't recovery Vista Home Premium software to install

  I get an error "Windows cannot configure Windows" or something like this message.

  Pointers would be most useful.

  Thank you, Tim.

  Usually, is not a big problem to install the Toshiba Vista image using the new HARD disk.
  But I've already read in different threads that in the case of much larger hard drives the recovery procedure could not complete successfully.

  In which case you would not be able to complete the Vista installation by using the recovery disk, you can try to install the system using the Microsoft disc. In this case I recommend you take the Win 7 OS. Its much better than Vista OS.

• Vista: problem downloading SP2

  whenever I'm trying to download SP2, it shows that it's almost over and then told me that there is a problem and it cannot end. I tried every hour, and it makes no difference. Been trying for at least a year.

  Hello

  You select Download - SAVE? After download go where you put it and right click
  on and RUN as administrator.

  Download Service Pack 2 x 86 32 bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=891ab806-2431-4D00-afa3-99ff6f22448d & displaylang = in

  Download Service Pack 2 x 64 64-bit
  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=8ad69826-03d4-488C-8f26-074800c55bc3 & displaylang = in

  Create a new ADMIN account with your password - same then REBOOT (do not logoff) and
  log on to the new account and try the download.

  How to obtain the latest Windows Vista service pack
  http://support.Microsoft.com/kb/935791/

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues
  http://support.Microsoft.com/kb/947366

  Free support for Vista Service Pack problems
  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1&wfxredirect=1&SD=GN

  Service Pack Center
  http://Windows.Microsoft.com/en-us/Windows/downloads/service-packs

  Learn how to install Windows Vista Service Pack 2 (SP2)
  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Working multiple vista problems not administrative, update service is disabled

  OTL: Bad vista problems.

  Help! My HP pavilion Vista acted strangely at the point, I'm ready to shoot, I can't do any administrative work, update service is disabled and this is what happens when the computer starts, sometimes freezes and will not go up at all, sometimes at the beginning I get the blue screen of death in both cases I got to close to the stop hand , I get this: "error file system 1073741510", I also have a notification at the beginning upward that says service host has stopped working. If I download a patch from the Microsoft Web site file or any else for this issue to try to solve tne problem when I try to run my computer freezes and becomes useless, if I try to find a restore point for backward, the computer freezes and has to be restarted, safe mode I'm not offered the opportunity to run the hotfix files , and in safe mode, the computer says that there is no restore point on the computer. It is a mess! Someone has an answer to this problem which lasts from the beginning of March 2015?

  my anti virus is mcafee which is corrupt as well...

  Help! My HP pavilion Vista acted strangely at the point, I'm ready to shoot, I can't do any administrative work, update service is disabled and this is what happens when the computer starts, sometimes freezes and will not go up at all, sometimes at the beginning I get the blue screen of death in both cases I got to close to the stop hand , I get this: "error file system 1073741510", I also have a notification at the beginning upward that says service host has stopped working. If I download a patch from the Microsoft Web site file or any else for this issue to try to solve tne problem when I try to run my computer freezes and becomes useless, if I try to find a restore point for backward, the computer freezes and has to be restarted, safe mode I'm not offered the opportunity to run the hotfix files , and in safe mode, the computer says that there is no restore point on the computer. It is a mess! Someone has an answer to this problem which lasts from the beginning of March 2015?

  my anti virus is mcafee which is corrupt as well...

  I recommend he shot, here is what happens:

  http://www.PCMag.com/Article2/0, 2817,2482387,00.asp?mailing_id=1232802&mailing=DailyNews&mailingID=E04F214FDE30EAE8AB28DD6FDC17561E

  Enjoy your new machine.

  You might want to use the old machine to install Windows 10 Insider insight on:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-10-technical-preview-ISO/

• Windows vista problems install keyboard and mouse

  I try to install windows vista ultimate on a new amd system I've built recently. The windows vista screen Boot starts well, but I can't go further with the installation because the keyboard and the mouse do not work.

  To solve the problem, I booted up with a Linux distribution and I can use the keyboard and mouse and everything works fine. Initially, I bought vista using boot camp on my Mac and the keyboard and mouse work well with vista on this configuration.
  I want to upgrade to windows 8 thereafter, but I might need to buy the whole program, rather than the update if I can't do vista works. I don't want to spend money if I can't because I'm broke. Any suggestions?

  Parameters of the BIOS of some computers have a setting "Enable USB Legacy" to allow the keyboard to work without Windows running.

  If you have PS/2 ports buy an adapter or a PS/2 keyboard. Most USB keyboards can be connected to a PS/2 port using a USB to PS/2 adapter.

• Could get a new router block printing? We had a lot of problems with the computer in the last week and a half. Bought new router and now the printer does not print. :-(

  (1) we went to DirecTV. Then the same day, our internet computer is down. I asked our current provider, Suddenlink, to let them know we had them to another - but we wanted to keep for the internet.

  (2) called DirecTV to investigate why our internet went down at the same time they installed? They said that they did nothing to cause that. We waited 5 days to make out and also install the third TV that was promised. The second tech gave things a lookover and said, once again, that there is nothing unusual during their passage to cause the problem.

  (3) called Suddenlink. They said it was the router. Called the people of Netgear. They said that the router was too old. We needed to pay an exorbitant sum for support and when I told him I'd rather just buy a new router and get free technical support for 90 days... and I personally do not have the credit cards in that time. (it's my mother s equip and I wonder it for the computer) when the guy told me that he could help and hung up on us, even though I was pleading for him to wait until I put my mother on the phone. (I'm in my 40s... not a kid).

  (4) Suddenlink called a few days later, when we got a new router (netgear brand NO!) Installed and I noticed that the 'ready' light was not 'on' on the modem. Their technology has said that he would check and call us in a few minutes. He did not.

  (5) the next day I called Suddenlink AGAIN. This time, I got a really nice customer service agent. She said she would send someone to check on it. It turns out that they had disconnected when I had called to pass only the TV.

  (6) in any case, we are finally online... only now... I can't the printer to work. :-(  This has worked before.  Could it be caused by the different router? I don't know about these things. I didn't even know what it was until someone at Radio Shack has explained to me. (I was not about to buy one at Wal-Mart - these poor people). The printer is a Canon Pixma MX340. We love him. The only thing is that it is difficult to clear the tasks or to reset. The only way to really do that is to simply pull the plug, unfortunately and restart the computer. But hey, it's a great printer, better than HP.

  We are under vista. The router is a Linksys wifi (which we have) N300 model E900.

  Of course I appreciate any help you can give. God bless you!

  Michelle and Ruth.

  Hello

  Thanks for posting in the Microsoft Community.

  I understand that you are facing problems with the printer in Windows Vista.

  I imagine the inconvenience that you are experiencing. I will definitely help you with this.

  Please follow the steps in the link.

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-Vista&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1