Tuning the FM radio
Tuning FM radio shows only the odd frequency in tenths, that is, i.e.: 100.1 100.3, 100.5 and so on. Sometimes I need a station at 100.2 exactly, but I can't listen to it.
What can we do?
Thank you
Haim
See this thread: FM Radio problem, as the uneven decimals.
Tags: SanDisk Sansa
Similar Questions
-
Error: Bluetooth + WIFI works within the same radio frequency
When the wirelessLAN is open and then press Fn to open bluetooth this error pops up, please help me to solve this
ERROR:
Opearte to device Bluetooth (TM) and wirelessLAN in the same radio frequency range and may interfere with each other.
If you use bluetooth and wireless LAN devices at the same time you occasinally network performance optimal experience or even lose your network connection. In this case always stop your operation of LAn wireless or bluetooth.Hi mate
It is simply to solve. You must use the BT or Wlan.
So, if you use BT connection, please turn off the WiFi and if you use Wlan, then disable the BTIn order to disable the WiFi or BT please use the Fn + F8 key combination you press this several times until the option has been disabled.
-
Satellite A100 - how to turn on the Bluetooth radio?
Hi, I have a Satellite A100, and I would like to know how to turn on the bluetooth radio. I'd appreciate any help on this.
Hello
First that you check if your laptop was equipped by BT module.
If so, check if the BT stack is installed correctly.
If Yes, then you should be able to turn on the BT using the FN + F8 key combinationGood bye
-
Tecra M6-EZ6612: Bluetooth and WLan operate at the same radio frequency range
Hi all
I have a laptop that is Tecra M6-EZ6612...
I have a problem that when I install the bluetooth I have a massege indicating a conflict between the wireless and bluetooth...Two of them are working in the same radio frequency range!
So, I wonder how I can change the frequency range of the bluetooth device? !!!Not like about it. Material Bluetooth v1.2 or v2.0 have included technology called AFH = "Adaptive Frequency Hopping" that tries to avoid conflict with WLAN. It can only be a problem if you have a very old hardware BT (before 2004).
-
S6000-H should have the FM radio. Can't find it!
The internet offer of Lenovo, one should have the FM radio. Where is he?
Try a search next time. But your answer is S6000 FM Radio
-
my desktop has rotated 90 degrees after playing a game that I changed the resolution. Tuning the pc turned off did not help
Hello
· What is the number and the model of the computer?
· What game do you play?
Try the following steps:
a. right click on the desktop empty
b. Select graphics options
c. and change the setting to normal and check if that helps.
-
How to turn off the FM radio?
I have a 8 GB with firmware V02.01.32p Clip.
I need to use my clip in a place where the FM radios are not allowed, and I never use this feature anyway.
How can I turn off the FM radio feature?
ygale wrote:
I have a 8 GB with firmware V02.01.32p Clip.
I need to use my clip in a place where the FM radios are not allowed, and I never use this feature anyway.
How can I turn off the FM radio feature?
-
The fm radio compact Z3 doen't work well
When I start the fm radio app and I put the helmet mi mobile search channels can't I already deleted the ok option seeing and it is not a problem with the headset please help me with this problem how can I fix it
Thank youThis seems to be a hardware problem, contact your local support to Sony Xperia
http://support.sonymobile.com/global-en/contactus/ -
The wireless radio does not work
The wireless radio does not work on my HP Photosmart C309a (Vista 32 - bit) - support contact HP on the wireless network Test report
The number of UK should be 0844 369 0369
-
What should I do if, during the installation of my c309a Photosmart Premium printer all in one, which I am trying to install a wireless connection, I get an error message that the wireless radio is not working?
Solved by turning the radio off and then on new wireless.
-
Lost the icon to turn the wireless radio on/off
I have a R61i. Can someone tell me how to get the icon in the system tray that enables or disables the wireless radio? I must have deleted somehow. Thank you.
-
OfficeJet Pro 8500 a - problem with the wireless radio
First of all, I'm sorry for my bad English. I hope that you have little imagination when reading. I'll start to describe the problem and the lower list, I hope, all the relevant information you need to help me.
Yesterday, I bought a brand new OfficeJet Pro 8500 has.
Since I have found a little bit of my computer and my router I configure for wireless connection.
All whent fine, the printer connected to my WIFI network without any problem and I was able to do a scan using the HP scanning software. How ever, when you try to scan a document nother directly after the first that did not work. I got an error message on the computer telling me that the computer could not connect to the scanner and it could be caused by the firewall. I also tried to print a word document, but it seemed that the document could not be sent to the printer during the observation of the State of the printer. Finally I gave up the print job and began to study the problem.
By using the service to help in the HP software that I did all the things he suggested me to do. I have disabled the firewall, open TCP/UDP ports, restarted the router, the computer and the printer in different combinations, nothing worked.
All the while the printer was connected to my WLAN, indicated by the State of the network printer and the router. I was about to give up but thought I should try only to disable and enable the transceiver wireless in the printer. To my surprise this solves the problem. I was in a position of scan and print documents.
Today, after work, I tried to do another analysis, and the same mistake was present. Once more I did magic with the wireless radio and it has temporarily solved the problem, but he came back a few minutes later.
Summoriz, the error can always be corrected by disable and enable the radio wireless, but after some time (a few minutes) the error returns that it self.
I played a bit and discovered that it is possible to access the built-in Web server during the error. Not all functionality of the EWS seems to work perhaps (it's OK) but I can't among many things has see the State of the network and I can even do an analysis using the integrated Web server.
I tried to reconfigure the printer using the printer setup wireless and also after a reset of the printer and it does not help.
I hope someone on this forum knows a solution to my problem.
Useful information:
Computer OS: Windows 7
Router: Thomson TG784 (I have an internet connection, phone and TV provider and this box takes care of this)
Encryption: WPA - PSK
WLAN: 802. 11 b / g
No filtering MAC or SSID hidden
Other devices on the network are two mobile phones and a Motorola Xoom Tablet
Printers, IP address: 192.168.1.81
Firewall: WIndows (the router is disabled)
Concerning
Thord
Problem solved. Reinstalled the PC s/w has little time and finally he solved the problem.
-
Is it possible to access the Fm Radio of the third-party application on a Blackberry 10 layer?
Hi all
I'm interested in a custom application tuner FM Radio for Blackberry 10 (Q5, Q10 or Z30) device of programming - I know that they have the necessary equipment to receive the FM Radio and the operating system includes an application FM Radio, but can applications without any special authorization / access control the tuner FM Radio? If so, where are the APIs for FM Radio on Blackberry 10 (I couldn't find it under the various options of SDK)?
Assuming that the answer to this question is Yes, third-party applications can access the audio PCM received by the FM Radio chipset? If so, how?
Thank you!
I don't believe it. FM radio capacity up to 10.2.1, who did not have an associated, SDK version because there was no new API has not been added.
If there is a feature you are interested in, the best option is to record about the developer Issue Tracker:
-
Need to align the two radio buttons in one line
Hi all
In my BlackBerry Application, I have a part of the user interface where I need to align two radio buttons in one line.
I used the code to design the user interface, but the two radio buttons below are overlapping.
SerializableAttribute public class BBSettingsScreen extends form {}
Rbg RadioButtonGroup = new RadioButtonGroup();
RadioButtonLayout raButtonLayout = new RadioButtonLayout();
raButtonLayout.add (new RadioButtonField ("ONE", rbg, true, RadioButtonField.FIELD_RIGHT));
raButtonLayout.add (new RadioButtonField ("TWO", rbg, false, RadioButtonField.FIELD_LEFT));Add (raButtonLayout);
SerializableAttribute public class RadioButtonLayout extends Manager {}
public RadioButtonLayout() {}
Super(Manager.VERTICAL_SCROLL |) Manager.RIGHTMOST);
}protected void sublayout (int width, int height) {}
Field field;
get the total number of areas falling under this Manager of
int numberOfFields = getFieldCount();
int x = 0;
int y = 0;
for (int i = 0; i)< numberoffields;i++)="">
field = getField (i); get the field
setPositionChild(field,x,y); set the position of the fieldlayoutChild (field, width, height); Spread the field
x += 30;
}width = 70;
height = 20;setExtent (width, height);
}}
}
Please help on this...
Thank you & best regards
Chintada Ravikumar
Try this:
RadioButtonGroup rgb=new RadioButtonGroup(); HorizontalFieldManager hr1=new HorizontalFieldManager(FIELD_HCENTER); RadioButtonField radioOne=new RadioButtonField(" RadioOne",rgb,true) { protected void layout(int width, int height) { super.layout(75,30);//Width and height according to the button name; setExtent(75,30);//width and height according to the button name; } }; hr1.add(radioOne); RadioButtonField radioTwo=new RadioButtonField(" RadioTwo",rgb,false) { protected void layout(int width, int height) { super.layout(75,30);//Width and height according to the button name; setExtent(75,30);//Width and height according to the button name; } }; radioTwo.setPadding(0, 0, 0, 20); hr1.add(other); add(hr1);
-
How can I install the latest update to the Bluetooth radio adapter generic Bluetooth? The version I have is 6.1.7601.17889
Hi George,.
Click on the link mentioned below, if it's an HP computer.
Good day!
Answer please if you have any questions.
Maybe you are looking for
-
Computer laptop keyboard and mouse does not work (updated Bios and took the batttery)
I have HP G60-530US.I read all the posts that talked about updating the BIOS and then by doing a hard reset by removing the power cable and speaking on the battery and then hit the power button for a minute or simply to leave the computer for several
-
laptop used to boot after update bios from hp site guard goes blue screen
Hi I have a compaq mini 110 (model 110 c-1110sa) I've updated the bios on your website and now it won't start on XP don't know what to do to get another work please can you help me to get this working again and it is not provided necessary to Flash t
-
Cannot connect to the sql server database engine 2008 developer edition. However can connect to analysis, reporting services. Kind regards. ~ ~ SiFaR ~ ~
-
error code 0 x 583 installing W7 from Vista
Unexpect error when copying the temporary files. Erroce code 0 x 583.The upgrade to W7 in a new laptop with Vista.Can someone help me how to do to complete the installation of W7.
-
How to choose a good youtube video downloader for windows 7