turn off gps

The Firefox Mobile in the Android Market application says that Firefox Mobile requires permissions to access your GPS location data. Is there a way to disable this?

The gps information is not sent to Mozilla and are provided only to sites with your manual approval.

For an example of what this looks like to visit http://html5demos.com/geo

For more information, see http://www.mozilla.com/en-US/firefox/geolocation/

Tags: Firefox App

Similar Questions

  • BlackBerry smartphones turn off GPS.

    I'm new to BlackBerry.

    I turned on the GPS to try it out and it works fine.  I then return to the E911.  I expected that GPS would not work then, but it also proved that the browser does not work either.  I activated the GPS back but the browser worked fine.

    If I leave the GPS on:

    Drain the battery even if I don't use this feature?

    Is there a way to autmatically turn it on when the browser is open and turn it off when it closes?

    Thank you.

    I just turned off the GPS on my lap and was able to use the BlackBerry browser with no problems. You don't need GPS to use the BlackBerry browser.

  • GPS on SW3 seems only Lock when I turn the GPS on my phone! (Note 2)

    Hello

    Only, I decided to jump on the bandwagon of smartwatch due to the external GPS in the SW3.  So, I bought the SW3 less than a week ago.  I intend to leave my phone (Note 2) at home during the race, but it seems that I can't do it again!  I bought the watch of VerizonWireless and only have less than two weeks return it if there is a problem with the GPS on my watch.

    I was doing some GPS 'tests' by starting GhostRacer and then...  (1) removing my watch during a night without clouds for more than 15 minutes and the GPS was always "looking."  (2) I walked my dead end a few times.  Always "in search".  (3) I had a crazy idea to turn the GPS on my phone.  Wow!  Almost immediately, the GPS on the watch will display 4 bars, then locked with 3 bars.  I continued to walk and GhostRacer started showing I was moving a distance and speed greater than 0.0.  Great!  Maybe just needs to use the GPS on my phone to lock the watch?  I turned off my phone GPS and continued on foot.  The distance and the stopped rate of increment.  I turned on my phone back GPS and the watch started to increase my distance again.  I kept turning off GPS on my phone and I found that the watch only really felt my movement when the GPS on my phone is turned on.  Before that, I tried RunKeeper and he always showed my distance to 0.0.

    If I need to have the watch uses the GPS on my phone, then it is not necessary to obtain this particular smartwatch!

    Is there something special I should do to "activate" the GPS of my watch?  Is there a special mode that I can run in to see how many satellites that my watch can pick up and, possibly, the strength of the signal?  I have not been able to find too many messages on the Internet on the GPS doesn't work don't not with execution of applications, so I wonder if there is something wrong with my particular watch, but I won't be able to prove that first.

    Here are some details:

    PWP

    Location: on

    Flight mode: Off

    Android wear: 1.0.5.1785466

    Note 2 phone

    GPS: Off (unless I'm trying to make my GPS watch to work!)

    Any help would be appreciated!  Thank you!

    Disconnect the phone from your watch and try again. Disconnection = go away or turn off BT on your phone.

    If your watch is connected with your phone, then the phone GPS and GPS settings have priority. Turning off the GPS on your phone means you want to use the location services.

  • iPhone 4S heating quickly, turn off the power and the battery drains quickly.

    Hello

    My problem is exactly the same as the title. My iPhone 4S warms up quickly, turn it off and after I turn the iPhone, the battery drains quickly and the iPhone will turn off after 5 minutes. iPhone turns off again and again until I put the iPhone on the charger. It is bad because I like to play games like Pokémon GO. But after 10 minutes of play, the iPhone starts heating (and of course delay).

    Things I've tried: (and didn't work)

    The apps I use no fence. (I close applications once I stop playing)

    Turn off location Services. (Enabled only when I'm with apps like GPS...)

    Reduce the brightness

    I will be grateful for any kind of help.

    Welcome to Apple Support communities, Krystof11cze.

    It seems that you encounter problems with your iPhone 4S on iOS 9.2.1 with heating, battery draining and stopping. Good job on the steps you tried as I would have recommended those as well. I will do my best to help!

    1. backup of your iOS device - because I have erase you your iPhone completely, it is strongly recommended that you will lose your data if you do not.

    2. restore your device to factory settings - using the settings on your iPhone will only erase your personal data. You will need to let iTunes erase the iOS version installed a new clean copy can take place.

    3 test the question - the first time through, set up your iPhone as a new iPhone when it asks. It's just temporary. You can connect to iTunes and App Store and iCloud and also download some of your applications. Test for problems you encounter. If your iPhone's battery life is improved, follow the next step.

    4. restore your iPhone, iPad or iPod touch from a backup

    Take care!

  • A Wi - Fi connection does not turn off correctly

    When I turn off Wi - Fi in the quick toggle or settings page it does not turn off and it is left running. (I have not 'analysis always' either) I can see in the graph of the battery when I turn it off for a while it always shows the green bar on Wi - Fi. I had this problem on 5.1 on my 4g (2013) g bike and I don't always.

    This seems to be a matter of google - I have it on non-Moto phones as well. The only thing to do is to restart with the Wifi turned off.

    I don't remember if disable the Wifi in the precision of the GPS solves this problem or not. I decided to live with it for now.

  • System does not boot up... message is... "" peripheral USB on the detected... current situation system turns off after 15 seconds.

    I recently bought a new golf gps device and connected to my desktop pc to register. After unplug his computer m USB cable I can't start my computer.

    whenever I start it the pc his usual routine, but then I saw the following message... USB device to the system detected. System turns off after 15 seconds.l

    Fifteen seconds after the system shuts down. It wiil also not afford to start or access the safe mode, the program installation or any other type of recovery mode, I could access normally. It will also not recognize my Win XP installation disc. I guess it's because of the configuration of the BIOS which accesses the hard drive before the CD rom drive.

    The problem was obviously created by the golf gps USB cable but I can't find a way to get the system to boot so I can find a way to eliminate the problem.

    Thanks for any help that anyone can provide. I am running WinXP Sp3

    Hi PAULARUNNELS,

    ·         What happens when you try to start in the Advanced startup options?

    ·         You receive the same error?

    ·         You external devices connected now?

    Try the following.

    Method 1: Disconnect external devices not essential, connected to the computer and restart the computer.

    Method 2: Load default BIOS (Basic Input\Output System) settings, and then restart the computer. Make sure that you have the CD drive set as first boot device. Check the settings by consulting the manual or call the manufacturer to do so.

    Note: Be careful when you change the BIOS settings. The BIOS interface is designed for advanced users, and it is possible to change a setting that can prevent your computer from starting properly.

    Method 3: If you are unable to start on one of the advanced startup options, and then you can follow this article.

    How do I recover from a corrupted registry that prevents Windows XP startup

  • Wireless WAN card keeps turning off F5521GW

    Hello

    Yesterday I installed F5521GW modem in my x220t and after downloading the drivers found on the forum, it worked fine.

    So I decided to do the automatic update, it finds some drivers associated with WWAN adapter (GPS, "Lenovo Mobile Access" and I guess that little bit more) and now I'm stuck to as minutes (three?) of the internet, and after that WAN wireless radio turns off, just like a unused WiFi card. It happens every time, when the connection is made and is obviously used too.

    I turned off "Disable mobile radio when you are offline" about access, also what card WAN goes off when you use the login, it crashes. I am connect using the Windows network and sharing Center, 'Broadband Mobile' application leads me only to a kind of activation (but I have a job... active service) and nothing more and 'Mobile access Lenovo' gives me a registration page, I guess for a kind of marked Lenovo internet service provider, as well as some icon saying that no mobile broadband is detected

    How to get rid of this auto card WAN? It was working fine until I decided to do an update...

    Partially replying to myself, but I solved my problem: I have disabled automatic shutdown of the wireless card... And it applies to WWAN too

  • Access code is lost as soon as the screen turns off

    When I turn my wrist after that my Apple Watch screen exploded, I need to enter the access code. I turn on the wrist, the screen turns off, I turn back, screen lights up, I need to re-enter the password. And so on and so forth. The watch does not maintain the code.

    I am white white, is not dense hairs on my wrist, no tattoos and I wear the watch very well on my skin.

    The funny thing is: it is a replacement watch, I got today. The other had the same problem, but this is probably because the bottom of the watch with the sensors fell, must have damaged the sensor cable. But this one is brand new.

    Hello

    Make sure the wrist detection is enabled:

    • On your iPhone, in the application of the watch, go to: My Watch (tab) > General > detection of wrist - turn on.

  • I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

    I have an iPhone 6 more, an official version of China, it shows a battery indicator when I turn off support, is this normal? I can depulicate this function to another iPhone? I know how?

    I remember reading somewhere on the Apple site in recent years on some models of Chinese iPhone with this capability. No other iPhones display this and there is no way to enable it. I can't find the article which includes this information.

  • After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

    After turning on my wireless keyboard led green lights, then begins to blink, and then turns off. The batteries are fresh.

    Possible explanation.  It is likely that batteries, so fresh, can be irregular in size.   The uncertain connection would therefore tend to lead to a failure to blink and you declare.   Read my thing...

    Batteries.

  • Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

    Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

    Settings > display and brightness > raise to Wake

  • Turn turns off Siri in iOS 10?

    How can I disable Siri completely in iOS 10?  My Touch ID does not work most of the time, and since I am now the button Home Siri comes up and tried to compose random contacts people.  I can't get Siri to stop and I have to so quickly turned off to keep from calling people!

    Settings > Siri

    > Siri: Off

    > Access to the lock screen: stop

  • iPad IOS 10 - AutoCorrect keyboard does not turn off?

    I don't know if it is a problem of IOS 10 or if it is a question of the iPad. One of the first things I do when I get a new device is turn off easily. I hate to correct automatically, but it seems not turning off itself. I was typing a message to a friend of mine and to instead keep the word I typed (Pervy) it replaces (Percy).

    I just upgraded to IOS 10 and checked to see if the AutoCorrect has been disabled or if she has it on again. Even with typing this message, it keeps replacing words on me with words that I don't type and are not what they should be. It is not a question of spelling either, so I don't know what to do to fix, but it's very annoying.

    Hello. You may also need to disable predictive. If you are using a physical keyboard, there are different settings for it. They appear only when it is connected.

  • I can't turn off on Apple Watch whatsapp messages

    Hello

    I don't want to receive notification of Whatsapp on my watch (just want to see them on my iPhone).

    I'm going to watch App > Notifications > Whatsapp > the switch is off

    However, I still get messages on my watch. Can someone help me?

    (I have the latest watch OS and iOS 10).

    Thank you

    Tomas

    Hi Tomas

    The following steps may help:

    • Toggle Notifications of setting and then turn off again, allowing a few moments between the two.

  • cannot turn off iPod touch, impossible to open iTunes, safari or app store

    I can't turn off iPod, or open safari, iTunes or app store cannot send messages.

    Is - this apple problem or my grandsons iPod touch?

    Try:

    - iOS: do not respond or does not light

    https://support.Apple.com/en-us/HT201412

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    https://geekindisguise.WordPress.com/2009/07/16/how-to-put-iPod-touch-iPhone-int o - dfu mode.

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    How to make a genius bar appointment? Apple support communities

    Shop Apple Store - Genius Bar

    https://www.Apple.com/retail/Geniusbar/

Maybe you are looking for