TURN OFF Keyline rectangle around multiple selected items.

Similar Questions

• Outline around the selected items of OCD

  WebHelp. RH9

  I just installed IE9 and when I run my published WebHelp and select a link in the table of contents, it displays an image dotted around the selected item. This never happened with IE8, so I was wondering if there is anyway to prevent it? Is it possible to add a "outline: no ' somewhere in the RoboHelp output (as you would in styling a CSS link) so that it does not appear?

  Thank you very much

  Jonathan

  Hi Jonathan,.

  Unfortunately, IE was a nut that is more difficult to crack than I imagined. The problem is that IE9 supports the css schema, but the table of contents is running in mode of whims so no goodness IE9 it... There is a solution, it's just not as easy as I thought. See http://www.wvanweelden.eu/robohelp/modifying_webhelp/remove_outline_in_toc for a step by step guide to get rid of the sketch.

  Note: If you let me, I would use your example on my site image. It seems much better than the image for example, I added

  Take a bow

  Willam

• Get rid of the black borders around the selected items?

  My granddaughter of thirteen months was interested in my keyboard and now each selected item has a black frame to highlight... and there is a small sign at the bottom left of the screen showing what I typed just, by providing the keystrokes, etc..

  What is and how to turn everything off?

  Thank you!

  ED in Brooklyn

  System preferences/accessibility/voice off - turn off the power. Command - F5 works also.

• How to make a rectangle around activeDocument.selection?

  Hello world!

  Recently, I met a terrible problem. I want to make a rectangle around the current selection, but not success.

  Could you help me or give some clues? Thank you!

  HAVE version?

  In CS3 , it works for me:

  // Box4selectedPath.jsx
  // for selected pathItems   // CS3
  // creates a green rectangle around all the selected paths (visibleBounds)
  // regards pixxxelschubser
  
  // http://forums.adobe.com/thread/1183584
  
  var StrtPOrigin = app.activeDocument.pageOrigin;
  var StrtROrigin = app.activeDocument.rulerOrigin;
  app.activeDocument.pageOrigin = Array(0,0);
  app.activeDocument.rulerOrigin = Array(0,0);
  
  var aDoc = app.activeDocument;
  var Sel = aDoc.selection;
  
  var newRGBColor = new RGBColor();
  newRGBColor.red = 0;
  newRGBColor.green = 255;
  newRGBColor.blue = 0;
  
  if (Sel.length >0 ) {
      var vBounds = Sel[0].visibleBounds;
      vBounds_Li = vBounds[0];
      vBounds_Ob = vBounds[1];
      vBounds_Re = vBounds[2];
      vBounds_Un = vBounds[3];
  
      if (Sel.length >1 ) {
  
      for (i=1; i vBdsI[0] ) {vBounds_Li = vBdsI[0]};
          if( vBounds_Ob < vBdsI[1] ) {vBounds_Ob = vBdsI[1]};
          if( vBounds_Re < vBdsI[2] ) {vBounds_Re = vBdsI[2]};
          if( vBounds_Un > vBdsI[3] ) {vBounds_Un = vBdsI[3]};
          }
      }
  
  var aRectangle = aDoc.pathItems.rectangle(vBounds_Ob, vBounds_Li, vBounds_Re - vBounds_Li, vBounds_Ob - vBounds_Un);
  aRectangle.strokeColor = newRGBColor;
  aRectangle.strokeWidth= 2;
  aRectangle.filled = false;
  aRectangle.stroked = true;
  aDoc.selection = null;
  
  } else {
      alert ("no selection")
      }
  
  app.activeDocument.pageOrigin = StrtPOrigin;
  app.activeDocument.rulerOrigin = StrtROrigin;
  

  Don't forget: only pathItems

• How can I get width that multiple selected items?

  How can I get width as selected multiple items? (Not grouped).

  -source code-

  mm = 2.83464566929134 var //unit conversion. (-> point milimeter)

  var W = docRef.selection[0].width/mm;

  Alert (W);

  -source code-

  

  Check this thread, there is a sample by pixxxel

  http://forums.Adobe.com/message/5213407#5213407

• Turn off auto scroll when you select objects in windows Explorer 7

  How can I disable AutoScroll in windows Explorer when I select an object in the second line of the display of the list?

  It is preventing me to double click on the file... :(

  If the entire column can not be seen, it scrolls when you select an item in this column.  The only way to avoid this is to maximize the window of your file so that it can receive the full column width.

• Is there anyway I can turn off ask to buy on free items and keep them with paid items?

  I keep asking to download free applications, and it bothers really me and my father.

  No, 'request to buy' apply to all downloads, free and paid. You can try to leave feedback to Apple about this: http://www.apple.com/feedback/itunesapp.html

• How can I turn off 'automatic selection' (?) on my menu bar?

  When I started to type an address in the toolbar, it climbs to an unwanted address... How can I turn off the ' auto connect, Auto - select "(?)

  Hi, please read dupresentarticle. Or go to Options > privacy (address bar) and position the nothing.

  Hope that answers your question.

• How to prevent my monitor turn off?

  I know this question has been asked repeatedly, but often the proposals remained without answers of the user.

  Therefore, accept my apologies for asking it again.

  Windows 7 x 64 is running.

  All goes well, until all of a sudden the screen turns off. There's - no - way to get on again.

  Mouse movements, altr-ctrl-del, nothing.

  PowerPlan is set to 'High Performance'

  Turn off the display: never

  Put the computer to sleep: never

  High performance - requires a password on the reactivation of the establishment: No.
  Hard drive - turn off hard disk after - setting: never
  Internet Explorer - JavaScript Timer Frequency - setting: maximum performance
  Wallpaper settings - slide show - setting: available
  The wireless adapter settings - setting of the energy saving Mode: maximum performance
  Sleep :
  -Sleep - after setting: never
  -Allow hybrid sleep - setting: Off
  -Corner layout - setting: never
  -Allow the wake timers - adjustment: activate
  Settings of the USB - USB selective suspend setting - setting; Activated
  Cover and the power button
  -Power button action - parameter: closed
  -Sleep button action - parameter: sleep
  PCI Express - links power state management - setting: Off
  Processor power management
  -Minimum processor state - setting: 100%
  -Political cooling system - framework: assets
  -Maximum processor State - setting: 100%
  Display - the display off-setting: never
  Multimedia settings
  -For sharing media - setting: avoid idling to sleep
  -For video playback - setting: optimize video quality

  Windows 7 x 64

  The drivers are all uptodate

  I need to stop the pc and reboot.

  Any suggestions?

  Meanwhile, I'm afraid I don't know what the use is for "Allow wake timers" and "USB selective suspend setting '.

  What are they supposed to manage and recommended settings.

  Thank you

  -

  

  =

  

  =

  Hi Mike,.

  Thanks for posting your request.

  We will try these steps and check.

  Step 1: Turn off the screen saver by selecting the screen saver 'None '. And check if you have a similar question.

  If the problem persists, please turn off the sleep in the BIOS. To check the BIOS settings, please consult the user manual or contact the manufacturer of the motherboard.

  Step 2: Perform the check and the boot if the problem persists. It will start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  Please see this link which has the steps showing how to perform the clean boot:

  (1) perform the clean boot (check the link to perform the clean boot)

  (2) enable half the services

  (3) determine whether the problem returns

  (4) enable half of the startup items

  (5) determine if the problem returns

  (6) repeat the steps above until you find out which program or service is causing the issue

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  Check out the link where the user has had a similar problem below:

  http://social.technet.Microsoft.com/forums/en/w7itproperf/thread/b769d9b4-300E-4066-B071-da54926112d2

  I hope this helps. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Turn off the mouse pointer in the Web Widget

  Hi people.

  I have a web widget, however when you get a mouse pointer.

  Is there a way to turn it off and just make the selectable items?

  Thank you very much

  Jason.

  You have a tutorial on BlackBerry Development Knowledge Base:

  http://supportforums.BlackBerry.com/T5/Web-development/how-to-use-the-new-navigation-mode-in-a-black...

• Cut and paste multiple selections to separate the layers?

  Whether you have multiple selected items with text scrolling.

  Something like this:

  

  Anyway, is to have, in this example, all cut and pasted to their own layer icons?

  If you do not have these limits of selection around the individual images, then the crop option & straightening in the Automatemenu would do the trick.

  Of course, it works on a contact sheet or a screenshot of thumbnail images.

  Edit: This would create a separate image for each icon. You would then load these documents into a pile or to import the files as layers.

• Upgrade to FF9.0.1, and the "Firefox" button has disappeared. If I start in FF in safe mode, it returns. If I manually turn off all "Extensions", he is still missing. When the button is missing, I get the "File" toolbar With the help of FF9 on W7-64 b.

  See the Question.

  Turn off the Menu bar by selecting view then toolbars and uncheck menu bar. This will bring back the orange button.

  Thank you

  Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.

• How can I turn off Genius in iTunes Store?

  I have iTunes game and you have downloaded many songs in the cloud - several today. However, now when I try to download I get a message that I can't do without disabling the iTunes Store Genius.

  1. I do not knowingly turn on Genius.

  2. How do I disable it? I can not even find it in the iTunes store.

  If you are subscribed to iTunes game, in new versions of iTunes, Genius of iTunes and iTunes game are connected to each other. Therefore, you will not be sometimes see an option to turn off Genius in iTunes. In these cases, you must first disable iTunes game by going to the store-> Turn Off iTunes game. When you do so, the menu turn off Genius will appear. Select to disable Genius.

• Settlement data based on multiple selection ListBox reference need help

  Hello again,

  The question that I have is selecting from a listbox with multiple selection to fill the tables with the selected data. My code is as follows:

  Void loadData_EventClick (ByRef This)

  Dim j

  Dim k

  k = 0

  If ListBox.MultiSelection.Count = 0 Then Exit Sub

  For j = 1 To ListBox.Items.Count

  If ListBox.MultiSelection (j). Count = True Then

  k = k + 1

  End If

  Next

  TextBox.Text = k

  End Sub

  The code works perfectly up to the second if statement. My current channel group list contains 16 channels and with the second if statement guided the textbox output is equal to 16 (i.e. k = 16), which is what I expected. Im just using the k = k + 1 for the test. Eventually will be replaced by operating code specific to what I need to do.

  So the question that I have is to get the code to recognize what values are selected and referring to the index for the selections in a table. Im not sure on how to do it.

  Any help is very appreciated.

  Thank you

  ~ Nathan

  Attached JPEG shows the current user interface and the output of k with the second if statement commented

  Hey Nathan--

  ListBox.MultiSelection () is a function that returns an array of [multiple] selected items in ListBox.

  ListBox.MultiSelection.Count is a property that returns the number of items in the table above.

  Therefore, the logic in your second IF statement that says if ListBox.MultiSelection (j). Count = True really makes no sense because:

  1. The array returned by the multiple selection (using (j) indexing now refers to a single selected item in the list (which has not its own 'Count' property)
  
  
  2. If you don't the array index, assuming that you had selected 4 items in your list, your statement would still be actually as said if 4 = True which is not what you get.

  Make sense?

  Here is a modified version of your code that I hope makes it a little more obvious how these elements relate to one another.  Give it a run; of course, 75% of the code is extranneous to you working end to account, so make sure that you subsequently delete what you won't need.

  Sub loadData_EventClick (ByRef This) ' creates the event handler
  
    Dim j
  
    If ListBox.MultiSelection.Count = 0 Then Exit Sub
  
    TextBox.Text = "Total ListBox items:" & ListBox.Items.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Total selected items:" & ListBox.MultiSelection.Count & + "" \n "".
  
    TextBox.Text = TextBox.Text & "Selected Items:" & + "\n"
  
    For j = 1 to ListBox.MultiSelection.Count
  
      TextBox.Text is TextBox.Text & ListBox.MultiSelection (j). Text & ", index" & ListBox.MultiSelection (j). Index & + "\n"
  
    Next
  
  End Sub

  You are making great progress; It will get quickly easily faster and we are here to help – do not hesitate.

• my computer doesn't turn off the first time.

  my computer doesn't turn off the first time I try to turn it off. This will turn off the second time I select "turn the computer off.

  Hi Guillermo_932,
   
  -You receive an error message or error code while trying to turn off your computer for the first time?
  -Have you been able to shut down your computer without any problem before?
  -If so, remember you have changed your computer before this problem started to happen?
   
  Follow the steps in the article, and check if it helps in fixing the issue:
  Computer does not close properly if selective suspension is enabled
  If it does not, check the event viewer to see if there is no error message related to this issue.
   

  See the following articles for more information on the event viewer display:

  Using the event viewer

  Procedure to view and manage event logs in Event Viewer in Windows XP

  After return with details that are of event viewer to help us help you better.