Turn off NI Application Web Server
Does anyone know how to turn off the NI Application Web Server. It's hammering away on a port I need for an application. I opened up the .ini.default file and considered changing the default port (which is 8080). Would that result in issues? What about preventing it from starting up in bootup. I don't see it in my msconfig file.You can change the default port by using the Configuration Page of the Web server safely. Read the white paper in the section flags 'Web Services created by LabVIEW' to the location: http://www.ni.com/white-paper/12402/en/
The white paper says http://
Then on the tab of the Web Server Configuration, you can set the port:
Tags: NI Software
Similar Questions
-
NEITHER Application Web server refuses to be activated
I am trying to deploy a web service in LabVIEW 2010 and it fails to deploy in saying that the Web of Application service OR work...
If I connect to http://localhost:3580, log in as Admin (empty password) and click on the page of web servers. I put the server to Application Web 8080 port, click on the check box turn on... then click apply - and the only thing that happens is that the browser displays the error on the page symbol in the status bar... There is not 'yes', showing next to the Enable checkbox for the web server of the system...
So - if I start again from zero and do the same thing, but also click the 32-bit option button before hitting the button apply - what is happening? Well, I get an error dialog box:
The service itself (32-bit, 64-bit is registered but not also started) runs according to the services control panel...
I'm stuck... If anyone knows what is missing here, is there something I am doing wrong, or something that must be done before activating the application service?
Uninstalling and reinstalling 32-bit LabVIEW 2010 on two different computers revealed that the problem appeared only on my Vista 64 bits - not the Windows 7 32-bit macine macine...
By looking at the services that are running on the machine with the problem that I could see that he was running the 32-bit version of the application Web server, had a 64-bit installed but disabled--but--only the latter has been fixed to depend on the Web Server service of NOR. This seemed a bit strange that the 32-bit version on the 32-bit computer was dependent on the Web server of OR...
So - I disabled the 32 bit Server Web Application service OR, turned on the 64-bit... and - I am now able to configure the Web application server to start.
Why so the 32 and 64-bit application Web services installed, with only 32 bit one running-, but not properly? This happens to everyone, but everyone arranges it by opting for the 64-bit version... or is there something that causes the installation get messed up?
-
Hi I did a tutorial on the splicing of images and I'm confused. He told me go to the windows tab and turn off the application framework. I can't find the application framework on the windows tab? I need to change a setting, or something
Hi, Yona,.
The application is available for Mac machine and not a windows machine.
Concerning
Rohit
-
How can I turn off my the web Guard feature
I can't see any adult material he says my web guard is enabled I would turn off there please tell me how I can do that
Not a native thing in Windows Vista. Find out what product installed on your system work for you protect and learn to use it.
-
How to turn off preview of Web page that is displayed when I move my mouse on a tab?
I don't know why it started today, but it's driving me crazy!
I was surfing on the net, when all of a sudden, I noticed that whenever I flew over my mouse one of my tabs, a (lot of rendering) overview of the Web page jump to the top of my mouse. I really didn't need this feature. I don't need to have an overview of the Web to another tab mini-page.
Please, how can I disable this feature?- Note: I disabled all my addons and still nothing. I disabled my hardware acceleration and still nothing. Please, I beg you!
I never noticed that. These old threads make light?
- Disabling the tab drop-down preview window? -FVD suite
- How can I disable the tab preview when I hover over a tab? -other add-ons/parameters
-
computer server crashed and neet to turn off use on another server
We had a server crash and had to rebuild but now acrobat does not have one of the two existing servers, so need to disable the server crashed to use on one of those ongoing, how?
Use a browser that allows cookies and popups, contact support to adobe for hourly pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html and request an activation count reset.
-
the difference between the Web application server and Web server?
What is the functional difference and the relationship between the Server Web applications and Web server, for example: Weblogic is the Application Web server, IIS is the Web server, Apache is the Web server and Oracle Application Server is the Application Web server? Someone said, Web Application Server is a Web server, but more functional superset, seems in this case, we can also use a server of web applications as a web server. For example, we can use Weblogic, but do not use IIS and Apache, please correct me?
Published by: user2571802 on February 28, 2010 18:51Hello
Have a read of http://www.javaworld.com/javaqa/2002-08/01-qa-0823-appvswebserver.html if all goes well it should give you a little more understanding.
See you soon
John
http://John-Goodwin.blogspot.com/Published by: JohnGoodwin on March 1, 2010 08:17
-
App background stops when the screen turns off
I wrote an Android app with a Service that receives events from the LocationService and the accelerometer and always try now to wear 10 BlackBerry. Tests on a Z10 STL100-2 10.1.0.4181
Once the unit has remained unchanged for some time, the location listener is not registered, in order to save energy, and re-recorded a trip again.
Don't worry, this can be disabled via the visible activity. But it must continue with the last State (start/stop) after the reboot.
I even magically figured out how to add additional permissions for the manifest of BAR: "_sys_android_autostart_service" and "run_when_backgrounded".
But as soon as the screen turns off, my application stops working. No location or accelerometer case being received. Turn on the display again, everything back to normal.
It is meant to be a question about the accelerometer, but I could not find in the tracker.
So my questions are:
-Is it possible to port Android continue to receive events location when the screen is off?
-Is it possible to port Android continue to receive events of accelerometer when the screen is off?
-Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)
-The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)
-Finally, this would be possible with a native application? (I could port the port iOS... lots of fun...)
Thank you very much for your help!
PS: If it's of any interest: I use the plugin V1.6.1 Eclipse/ADT to package and install the bar.
As reported here as well (and I'm sure in other places)
I'm working on a deal in the next version, similar to what we're doing with location requests (in other words, activate us the background mode if your app acquires a partial wake lock).
Edit:
So my questions are:
-Is it possible to port Android continue to receive events location when the screen is off?
(Yes, but you must hold a wake lock).
-Is it possible to port Android continue to receive events of accelerometer when the screen is off?
(For the moment, no, but I'll change that, so it behaves like location.) Mind you, this could be used to work on old revisions of the software until the native sensors team added a background of sensor mode which is disabled by default and must be explicitly enabled).
-Will my service to continue to operate if more than 8 Apps began after mine? (And the user did not hit the close button)
(There are a lot of thing that matters if your Services happens to run or not, which is not limited to, but includes the number of applications already running and the status of the device memory).
-The "headless" 10.2 mode help? (I currently only test with 10.1, because my service provider has not yet unlocked 10.2)
(No, it's a native thing. Your application is already technically without head)
-
Licenses of creative cloud, I forgot to turn off an and formatted the drive.
Recently, I put one of my licenses creative cloud on a Lenovo laptop. My other is on my MacBook which I mainly use.
My Lenovo was defective, so I got it exchange and formatted the drive, do not think that I should turn off my applications.
My question is, I'll be able to use my second license now on my new computer?
You should be able too. Creative cloud subscriptions work on Windows and Mac OS.
-
Tecra S2 began to turn off the power when you run some heavy applications
I have laptop Tecra S2 and (almost 3 years) had no problem so far.
Recently, it started to turn off instantly when you run some heavy duty applications, such as games. He takes turns instantly and can work hours if it's just a spreadsheet or just Web broswing documents but when I start a game it takes 15-20 minutes.
Once I started it even once, it takes less time to get the same result.
My guess is overheating - any ideas how to fix?
Or it may be something different?See you soon
Hello
There is nothing to fix. The laptop needs to be cleaned. It must be done on the professional track. This means that the laptop must be disassembled as just at the moment when the cover is removed the cooling fan and the cooling rack can be cleaned properly.
After having this laptop will work like new.
-
Turns off server...
I have a PowerVault 745N running windows server 2003, sp 2.0. He is 5 years old and for the last 3 weeks, it seems that the Dungeon of hard drive turn off. This happens about every 3 days, but sometimes several times per day. I thought that it was due to overheating, so the processor, motherboard and fan 3 times have been replaced. I checked the event logs and no error message, I ran sfc/scannow and who will run for about 5 days, and then it turns off again. I ran a diagnostic test on it yesterday and everything is back as adopted. Someone at - it something I can try to help me understand why this server turns readers? Ive even change the power supply was plugged in and still no luck. Any suggestions would be greatly appreciated.
Hello
I suggest you to send your application linked below:
http://social.technet.Microsoft.com/forums/en-us/winservergen/threads
-
Hi all
Since a few days, we are on 11.1.2.3.500 and using IE 11. In IE 11, we can use Oracle EPM Suite only in Enterprise Mode, otherwise only "Bindows" appears. Now, my question is how can I disable (or remove) the Popup Message "the current compatibility setting is not supported. Turn off compatibility view before you run this web page. "because it's really embarrassing that this message whenever I start a planning application, Manager of calc or what ever.
Thanks a lot for your help.
Kind regards
André
You can go to tools > compatibility view settings and you should be able to remove the Web site / uncheck compatibility view so that you won't get this message
HTH
Amarnath
-
Hello, I bought a new CPU and need to transfer my student CS6 Design and Web Premium. The reason for the news of the UC, it's that my old CPU no longer works so I can not turn off. Any suggestions?
Hi titi % 20wright,.
Please use the link below to Download Adobe Creative Suite 6 applications
Since you get two activation with a license, once installed you must activate the product using the same serial number. See, https://helpx.adobe.com/x-productkb/global/find-your-serial-number.html
Let us know if that helps.
-
Why do I receive alerts in iPhone mirror on my watch for an application for which I turned off mirroring alerts iPhone?
Watch OS 3.0
iOS 10.0.1
Hello
You should find that restart both devices solves this problem.
The two put together, and then restart your iPhone first:
-
iPod touch cannot turn off and connect to the server
He always responds to my touch, but it does not turn off when I press the lock button or the lock screen in a long time.
At first, I tried to open an application, but he was stuck with the logo page, so I thought it re - install but then when I opened the app store it is impossible to connect with the Wi - Fi connection. Then he started does not, stuck with notif center I have accidentally fired. When he locked the door, that I unlocked it and it was back to normal. So I tried to disconnect and reconnect to the definition of id apple, but it says verification failed and I couldn't sign.
I also tried checking on the software update, but it says unable to connect, and I do not remember whether or not I have updated to the new iOS.
Help, please!
Try:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Reset all settings
Go to settings > general > Reset and tap reset all settings.
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
Restore your device from an iCloud or iTunes backup - Apple Support
https://support.Apple.com/en-us/HT204184
-Restore factory settings/new iOS device.
If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
Maybe you are looking for
-
Recently, my brother bought iphone 6s more USA and sent to India for me. But it does not identify the SIM card and said locked carrier. How to unlock the phone now. Help, please. Is it possible to unlock the phone with IMEI number if I contacted appl
-
Excite AT10PE-A-105 - cannot install and use USB driver
Hello I bought the AT10PE-a-105 and I never managed to install the driver for debug applicatoin android with eclipse. I use Microsoft 8.1 64 bit (last updated).I'm following the available tutrorial (RTFM). Even I'm a fan of the home user, I need to r
-
Satellite A300 - Windows Vista restarts on shutdown
I just have to drive HARD on Satellite A300, Vista recovery and it gives me problems when I try to close it, it just restarts. It doesn't matter if it is on battery or plugged in. I have the point on the BIOS, did you install in power options, but st
-
I had to replace my motherboard and the company who did the job placed a copy pirated XP Professional on my computer. I did a clean install and my XP install Explorer 6. I can not install McAfee with Explorer 6 so I went to MS Updates to update my
-
My hotmail account was hacked last week, and emails were sent to all my contacts. I changed my password, scanned my computer three times, and it looks clean. However, when I go to create a new email and click on the button 'A', 6 * site addresses see