Turn off Photos launch when connecting iPhone

Similar Questions

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye

• If it is good I turn off my IPhone6s when loading?

  If it is good I turn off my IPhone6s when loading? And it's good to load when 10%?

  Q1: he is indifferent to alll you use the iPhone or not care of everything.

  Q2: for a modern battery like the iPhone, it is best to start charging when more than 20%; never let iPhone die because of an empty battery, which is bad for battery life.

• Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Does anyone know how to turn off this setting when your phone is at a certain angle turns on without you pressing the button side feed or House? Please if you know tell me!

  Settings > display and brightness > raise to Wake

• Turn off the music when I plug into the speaker / earphone cord

  Turn off the music when I plug speake / headphones cord. Have to unplug to get the music to play again.

  Have you ever force reboot the phone by holding down the button sleep and home for 10 seconds, until the Apple logo comes back again? You won't lose data, but it can cure a few glitches.

  Usually the music stops if you unplug the headphones to the device, and you have to press 'play' again to keep listening via the external speaker.

  If you use the external speaker and plug in the headphones, the song doesn't stop and continues to play through headphones. Just tried it with my camera.

• Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  I got an error message in step 2 of configuring updates - "updates were not correctly configured.  Returning from changes' anyone can help solve this problem?

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
  http://support.Microsoft.com/kb/949358

• HP Probook 645 G1: Turn off the wifi when it is connected to the wire

  Hello

  I have a HP 645 Probook G1 A4 - 4300 M / 4 GB / 500 GB SSD/DVDRW/14 "HD/W7P 64B latptop.

  I also have a model Dockingstation REPLACEMENT-I10X.

  I have attached an ethernet cable on the docking station that works. My problem is that when I connect my laptop to the docking station. Get a priority above wired wireless. If the laptop still uses wireless unless I turn it off manually.

  Ofource I want to log out manually. I want the phone choose wired when wired and wireless when wireless.

  I tried a couple things:

  1. I went setings adapter--> advance--> Advance settings--> moved the connection to the lan network to a network connection wireless, top of page bottem. it did not work

  2. I manual put several metrics in connection properties (internet protocol 4 & 6--> Properties--> Advanced--> change automatic metric to manual and filled a small number to wired connection (No. 5) and filled a higher number (No. 250) to the Wi - Fi connection.) it did not work

  3. looked in the bios menu. There is no option to change the priority or something like that.

  Now, I always disconnect the wifi when I'm attached to the docking station (even tried plugging an ethernet straight cable to the laptop, but that has not helped either). Problem is when I unlock the laptop from the docking station, I have to manually reconnect to the wireless network.

  Additional info: since my laptop is always closed when it is locked on the docking station, I cannont press the WIRELESS button to disconnect or connect.

  Any suggestions help would be greatly appreciated.

  Hello:

  See if the BIOS of your laptop computer has a LAN/WLAN, commissioning.

  On my HP Elitebook 6930p it is a parameter to enable the LAN/WLAN switch that automatically turns off the wireless card when an ethernet cable is connected, and vice versa.

• iTunes will not launch when my iPhone is connected to the pc

  He used to work.  When I open itunes manually iphone 6 syncs and appears in itunes.  Most of the fixes I've seen are for Mac etc..  Is this still a problem of ios on my phone?  I have the latest update to 9.2.1. He has not worked in quite awhile, do not remember what is the last update, he worked with.

  I did a lot of tests by Apple.  Everything was working and in order.  Diagnosis of NAB, which is located in the menu helps in itunes.  The only thing that seemed wrong was that I was not to run the program as an administrator, who I am.  I close itunes and right-click on the icon of itunes and click on "run as Administrator".  I unchecked the option to "automatically sync when this iphone is connected."  Then, I closed itunes.  Right clicked on itunes and "Ran as Administrator" once again I then checked "automatically sync when this iphone is connected".  Close itunes again (while I was doing all this I disconnect and reconnect the iphone).  Then, I plugged in my iphone to firewire (connected to the laptop), once again and low and here's open itunes.  Hop this help someone as well.

• We have a macbook air family.  I've implemented and have admin status and have put in place the other members of the family as users.  However if the unit is turned off, other users cannot connect without me logging in first.

  MacBook Air (13 inch, early 2015)

  10.10.5 Yosemite

  Intel Core i7 2.2 GHz

  4 GB 1600 MHz DDR3\

  Intel HD Graphics 6000 1536 MB

  We have a macbook air family.  I have set up on the purchase and created accounts for family members, but if the unit is turned off, they are all unable to access the boot until I connect and select their code.  If I do this, what they see on the splash screen is my ID.  Of course, I do not share my password with anyone, so it becomes a problem when I'm out of the House.  Please can you help me?

  Do you have system preferences > users and groups > Login Options set up like that?  You should.

  

• Re: Satellite Pro L670 - can I turn off the sound when the battery is empty?

  Hello

  Is it possible to disable the bios beep when the battery is empty or the laptop's Hibernate?

  I have a Toshiba Satellite Pro L670.

  Even when the sound in Windows is turned off the laptop do a annoying sound.

  Thank you!

  Maybe it sounds silly, but I put t understand why that should be disabled. When the battery reaches the critical battery level you will be informed about this and portable must be connected to the power running or you have to save your work and turn it off.

  Do you really want to work until the battery is completely discharged?

  Anyway, AFAIK this notification level BIOS cannot be disabled.
  Let's see if someone else is better informed than me.

• I turn off my computer when finish work but it turns itself in the middle of the night.

  My computer seems to have a mind of itself. He wakes at night after being off for hours

  This problem is sometimes because your system is set on "Wake on LAN" which means that if a packet of information happens on your Ethernet (Internet) connection, which could bring your system to wake up and then find nothing to do.

  There is a good reason for that custom this feature in some environments, but usually not for a computing environment.

  You may have a task on demand that you have added or some third party program you have installed has added for you which could be put in place to wake up your computer when he thinks it's time to run.

  If you use the Stand By option and you have cats, they can walk on your keyboard or mouse and that might be enough to turn your system off Stand By.  If you are sure that you are really close, it would not be the problem,

  The parameters might be in your system or part of your Internet - BIOS that can be disabled if you don't need.

  You can search on the Internet with something like Google for your system and model and of wake on lan and should be able to know how to disable it for your system of brand not specified and the model.

  You can experiment and before spending the night, turn off your system in the usual way and then physically disconnect the Internet cable and see how things look the next day.

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  If the system works, what do you think might have changed since the last time it did not work properly?

• I can't turn off the display when I use screem saver

  I keep my laptop always on, recently the screem saver don't work when I choose when turn off the display. All this time, the show view screem saver, but never active the option off.

  Hello

  ·        Is there wireless devices connected to the computer when you leave it on?

  Wireless devices may also not allow the computer to turn off the screen if there is no interference.

  In addition, it is not advisable to keep the laptop. He could be an update or a facility that has occurred and which requires a stop. Would cause the problem; try to restart the computer and check if the problem persists.

  If the problem persists, check that the power plans settings. For more information follow the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  Also, try to change the theme of the computer and check if that helps. to change the theme follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-theme-to-improve-performance

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Touch pad to turn off Windows 7 when the mouse remotely installed as I could in Windows XP

  In Windows XP, I could go to control pannel, mouse and click to Disable Touchpad when another mouse was attached.  It would be automatically on the touch pad if no mouse was attached USB.  I couldn't locate any method or the answer that allowed a change of software touchpad in Windows 7.

  I had an old Dell D820, installed Win7 and couldn't find a way to disable the touchpad and keys/stick.  Based on other suggestions, I went to the Dell website and downloaded the drivers Vista (Win7 drivers not available).  As soon as he installed and rebooted, I had an icon in the Sys Tray (by the clock) that I could then select a setting to turn off when the external mouse connected.  So for those who said it is a pilot thing, I agree with them.

• Tecra S2 began to turn off the power when you run some heavy applications

  I have laptop Tecra S2 and (almost 3 years) had no problem so far.

  Recently, it started to turn off instantly when you run some heavy duty applications, such as games. He takes turns instantly and can work hours if it's just a spreadsheet or just Web broswing documents but when I start a game it takes 15-20 minutes.

  Once I started it even once, it takes less time to get the same result.

  My guess is overheating - any ideas how to fix?
  Or it may be something different?

  See you soon

  Hello

  There is nothing to fix. The laptop needs to be cleaned. It must be done on the professional track. This means that the laptop must be disassembled as just at the moment when the cover is removed the cooling fan and the cooling rack can be cleaned properly.

  After having this laptop will work like new.

• Can I please turn off Photos?

  Until very recently, I used a PC for my photos, but when I got lucky that I bought an opportunity 27 "iMac, as many people see this platform as the bee knees when it comes to media. (It runs El Capitan).

  I used Lightroom since it was called Pixmantec Rawshooter, pre version 1 and love it - lately I added to it remains creative Cloud applications. I have over 50 K images in different catalogs in LR - and I draw quite frequently, using the SD card on the iMac drive to read the cards.

  Which brings me to my question. Having to close the Photos is annoying, but something I could live with if it wasn't for his tendency to eject the card and the flag, the map also read makes it inaccessible, even if I remove and reinsert. I googled some tips, like remove the check mark in the upper left corner, that work until I have format maps (what I'm doing after each shot). At this point, I have to get out of my old laptop Windows and a USB hard drive, copy the images of cards on this and fix the hard drive of my iMac to import photos into Lightroom.

  Many people have a lot of arguments for the use of Photos and iCloud to store and synchronize between all devices and so on — and they are more than welcome to do so, , BUT I would like TO HAVE THE CHOICE! (I'm sorry for the cry, but I just spent the better part of an hour to perform the procedure above).

  Is it possible to uninstall or disable the Photos app that runs constantly? Windows 8 and later has implemented an application of pictures that is almost as annoying, but it can be bypassed by choosing another default app for the pictures look a/edititng. I guess I could go back to Windows, but there are other aspects of the Mac, I like.

  Thanks in advance

  Kjetil

  Which brings me to my question. Having to close the Photos is annoying, but something I could live with if it wasn't for his tendency to eject the card and the flag, the map also read makes it inaccessible, even if I remove and reinsert.

  To avoid this, don't quit Photos opening - simply click on the yellow "minimize" button in the traffic light in the toolbar to close the window.  The window will be minimized and out of the way, but not to eject the card.

  There is no real help at present.

  Join us by sending your feedback to Apple with a feature request to change this annoying feature.

  The feedback form is here: Apple - Photos - comments

  Right now you can only try to disable the autolaunch of any application altogether. But it does not always work and any update could break.

  This Terminal command to disable auto-start for any photo application, not just Photos. If Lightroom will not launch either.

  • Photos of quit smoking and unplug any camera.
  • Open a Terminal and paste this command and press return:

  defaults write currentHost - com.apple.ImageCapture disableHotPlug - bool YES

  • Restart the Mac. It is not necessary, but it worked for me after the reboot.

  I found this fix in a post of JadedEye ( leonie)

  https://discussions.Apple.com/message/29506561#29506561