Turn off the Blackberry at startup

Similar Questions

• BlackBerry smartphones turn off the Blackberry "BOLD"

  OK, I know this sounds stupid, but what is the correct procedure to turn off and restart the Blackberry "BOLD"? I hav tried holding in the key power, I get the stop message, press any key to cancel, I leave it alone and the backlight turns off, left alone for 10 minutes and then press the Power button again and the phone comes to life instantly, with the phone in the same position as when I wanted it off, i.e. it looks like it's just in mode 'sleep' as it is consumed in less than a second. I resorted to the battery, but it becomes laborious. And I cannot locate the info in the manual, it says just press the switch! I have also tried holding down until it seems to power off, but alas he always goes in mode 'sleep', please tell me what I'm doing wrong?

  Please mark the thread solved.

• Turn off the blackBerry Smartphones wireless synchronization of AddressBook

  Hello

  Using Desktop Manager to sync. Sort address book wireless synchronization has been enabled. I want to turn it off again. It's supposed to be in the help, but all he tells me is that I can it turn on or off. Any suggestions would be helpful.

  LewisCC

  Access your address book, press the Blackberry menu button and select Options.

  Select your address book that you no longer want to synchronize wireless and turn off wireless sync.

• Turn off the blackBerry blackberry bold 9900 screen Smartphones

  Hi all

  I had a blackberry bold 9900. It's a good phone, but the touchscreen trouble me.

  Can you explain to me how can I disable tactil on my screen of my blackerry bold 9900. I would use my phone with my keyboard, my fingers are too big for the lastest technology tactil...

  Thanks guys and best regards

  The only thing I think would be physically unplug the cable, however, the device does not work properly because there was not enough load on the circuit, and some components would not work correctly I believe because I broke a BB bolding 9930 keyboard flex cable and the device got so hot and closed off the coast until I changed the keyboard. I think the 99xx is designed to be perfectly balanced wise tension and no component could not be disconnected because of this.

• Turn off the blackBerry smartphone Bold 9000 password?

  I made the mistake of turning on the password on my 9000 "BOLD" last week.  It took a weekend to decide the security is not worth the pain it causes trying to use my phone for simple tasks.

  So I went back to tools-> Options-> Security Options system and tried disabling "Content Protection."  Activation of this feature, that's what works the password in the first place then it seemed a logical way to Undo my mistake. No luck.

  Can someone give me a hand with this?  My "BOLD" is not defined on any company BES server that I know.

  Options > Security > General settings.

  According to the release of the OS you're on (you don't say), it might be Options > password.

  What is your operating system loaded on your device?
  Look at the Options > about, third line down, starting with a 'v.4.xxx '.
  What is yours?

• I can not sincronize my Blackberry Desktop Manager with Windows Live. I get the message "unknown error reported" How turn off the connected BlackBerry smartphone advanced power management features

  I'm on resolution 5, I used four different resolutions and none of them work, and I do not understand how to apply the meanless 5. Resolution 5

  Turn off the connected BlackBerry smartphone advanced power management features. For more information about how to disable the USB selective suspend feature in Windows, visitMicrosoft Help and Support site and search for "disable usb selective suspend."

  See if http://support.microsoft.com/kb/902274 help
  --
  ..
  --
  "andresgn" wrote in message news: 9754 c 356-97ed-4b9f-8dc5-c3318a6dc60b...
  > I'm on resolution 5, I used four different and no resolutions are
  > work them, and I do not understand how to apply the meanless 5.
  > Resolution 5
  > Turn off the connected BlackBerry advanced power management features
  > smartphone. For more information about how to disable the selective USB
  > suspend functionality in Windows, see the Microsoft Help and Support site
  > and look for "disable usb selective suspend."
  >
   
   

• Update blackBerry Z10 OS10 10.3.2.2168 turns off the Flash in the browser

  Hey everyBerry! Is it just me, or is the built-in Flash Player went into the last OS update?

  I distinctly recall having a menu option to turn on or turn off the Flash and it's gone and Flash support in web pages went as well.

  Nevermind, I just said to myself. Heck! Flash is no longer supported.

  http://support.BlackBerry.com/kb/articleDetail?ArticleNumber=000036434

• Camera blackBerry Smartphones - how to turn off the sound?

  Hi any person!

  Does anyone know how to turn off the sound on the camera?

  Thank you!

  Alex

  Alex, you can't without a third-party application.

  Google BerryAnnoying.

  And read this: http://supportforums.blackberry.com/rim/board/message?board.id=8100&message.id=6574#M6574

• BlackBerry smartphones you can turn off the load stop light?

  Anyone know if there is a way to turn off the charge indicator when the phone is off - it sit right next to me when I'm in bed, and she flashes all the time until his load.

  just one of those annoying things...

  PS< also="" wondering,="" can="" i="" temporarly="" switch="" off="" email="" accounts,="" so="" that="" they="" are="" not="" pushed="" to="" my="" bold="" all="" the="">

  Please take a moment and solve the thread, OK?

  Thank you

• BlackBerry Smartphones turn off the wireless feature

  Is there a way to quickly turn off the features "BOLD" wireless, so I can not transmit or receive?  I would use it in the aircraft on a trip, but I can't find a way to quickly turn off the transmission and receive the device characteristics.  Thank you.

  Doug

  Or if you go in manage connections, choose the first choice disable all connections, or just uncheck the Mobile network.

• How to turn off the Toshiba Hotkeys properties?

  How to turn off the Toshiba Hotkey properties so that I can install Microsoft Money? I get a message telling me that the installation cannot continue because the properties of the shortcut keyboard Toshiba is running, but I don't know how to turn it off, or when it is!

  Hi coxrhu,

  the fastest way to stop hot keys is to remove the Hotkey Services in the Windows startup process.

  Launch msconfig, look at "Startup" and search for "00Thotkey" and "000StTHK".
  This programs are normally responsible for the service.

  Hope this helps
  I will assume no responsibility for accidents to your system or loss of data.

  BR

• How to turn off the menu of the camera on Satellite A205?

  About a year and a half ago, I bought a laptop Satellite A205-S462. It came with a camera that I never had a use for. I managed to turn off the camera, but the context menu pop still annoyingly when my mouse goes to the left of the screen.
  Can someone tell me how to disable or hide the menu permanently?

  In addition, because I'm not a big fan of the use of memory on the facilities that I don't use, I guess it's a service I need to stop. But which?
  TYIA

  Hello

  Best thing you can do is follow:

  Start the window RUN (Win + R key) and put inside MSCONFIG. When the system configuration window is open, click on the Startup tab. You will find Chicony traybar under Startup items. Delete in front of her box and Camera Assistant Software will be begins not with Vista.

  If you need cam you can start it manually.

  Sorry, but I didn t understand your second question. I hope someone else can help with that.

• Can I turn off the terrible start-up sound?

  Starting my new Mac Pro, is it possible to turn off the sound of terrible start?

  Yes, you can adjust the volume of the startup chime using this trick:

  Adjust the Volume of ring tone to start up your Mac

  Tom

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• Configuring updates stage 3 of 3 0 full do not turn off the computer

  Got the scren then restart the pc "Configuring updates stage 3 of 3 0 full do not turn off the computer" and does not get the login screen. Every time when restarting the pc get the same error. Also not able to login in SafeMode also.

  Please provide the support for the same thing.

  You probably eventually turn off manually.

  Read this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you have problems to restart, read on:

  If restore work not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And wonders about the updates of Windows:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost, although wanting to tell them exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner