Turn off the blackBerry blackberry bold 9900 screen Smartphones

Hi all

I had a blackberry bold 9900. It's a good phone, but the touchscreen trouble me.

Can you explain to me how can I disable tactil on my screen of my blackerry bold 9900. I would use my phone with my keyboard, my fingers are too big for the lastest technology tactil...

Thanks guys and best regards

The only thing I think would be physically unplug the cable, however, the device does not work properly because there was not enough load on the circuit, and some components would not work correctly I believe because I broke a BB bolding 9930 keyboard flex cable and the device got so hot and closed off the coast until I changed the keyboard. I think the 99xx is designed to be perfectly balanced wise tension and no component could not be disconnected because of this.

Tags: BlackBerry Smartphones

Similar Questions

  • BlackBerry smartphones turn off the Blackberry "BOLD"

    OK, I know this sounds stupid, but what is the correct procedure to turn off and restart the Blackberry "BOLD"? I hav tried holding in the key power, I get the stop message, press any key to cancel, I leave it alone and the backlight turns off, left alone for 10 minutes and then press the Power button again and the phone comes to life instantly, with the phone in the same position as when I wanted it off, i.e. it looks like it's just in mode 'sleep' as it is consumed in less than a second. I resorted to the battery, but it becomes laborious. And I cannot locate the info in the manual, it says just press the switch! I have also tried holding down until it seems to power off, but alas he always goes in mode 'sleep', please tell me what I'm doing wrong?

    Please mark the thread solved.

  • Tethering with the Blackberry Bold 9900 blackBerry smartphones

    Hello, I just bought the blackberry bold 9900 and asked whether it is possible to share my 3G connection with my iPod 5th generation?
    Thank you
    Good bye

    Thank you very much

  • LJ Pro300 color MFP M375nw. Power cycling, displays "49 service error - turn off the power, then press" on-screen.

    Bike constantly, the power display "49 service error - turn off the power, then press ' on-screen before stopping.
    For this printer only when it is connected to the network. Quite happy to sit quietly when printer NOT connected to the network.

    Unplug the network cable from the printer, check and clear all print queues (there may be a doc pdf sitting in a pc or server print queue)

    Once the queues have been dotted, restart the printer and reconnect the network cable.

    If this does not cure the problem, then the likely problem is a defective formatter Board.

    Good luck!

  • BlackBerry Bold 9900 UMA smartphones?

    Hi guys,.

    Sorry if this has been requested may already, see booster signal UMA on the 9900 specs, I was wondering if this is a feature included as I intend to do next week when my upgrade is due on my contract. Also while I am here I noticed none of the UK suppliers do the 9930, is there a particular reason for this, and much of a difference does make? I noticed that the 9930 is what is considered a 'phone' and is not the 9900, which does not imply that the 9930 will get a carrier signal in more countries than the 9900?

    Thanks in advance,

    Craig

    I read that there no UMA and leaking Tmobile U.S. image today advice he could come later.

    So, are not currently, at least.

    http://www.TmoNews.com/2011/08/BlackBerry-bold-9900-coming-soon-says-t-mobile-no-Wi-Fi-calling-at-La...

    The only difference in the 9900 and 9930 is the 9930 includes bands of CDMA network that make it usable on carriers like Verizon in the United States.

  • How to turn off the LCD on my T420i screen/monitor without spin mode sleep?

    I have been using an Ideapad Y450 before this T420i. I love the Fn + F2 shortcut that I turn off the screen without turning to the mode "sleep" or sth like that. It still works as awaken, only the monitor is off, it is still continue to play the music or to continue the download. The display should be activated by moving the mouse or type on the keyboard, but only when you click Fn + F2 again. How can I do that on this new computer? T420i? Or is it not possitive to do? I really want to be able to turn off the screen without turning off or turning to sleep.

    On my T400, I can choose Fn + F3 settings, press the combination to see if you have this:

    Once you set it to "Turning the display off", in the future, you would be able to quickly shut down.

  • BlackBerry smartphone screen turns black in the Blackberry Bold 9900, but everything else, keys, touchpad screen and keyboard still works.

    It is a problem, I think that many have known, but there is no real solution to the problem. However, initially all of a sudden phone has begun to show an error (can't remember not exactly what, but something related to something does not turn) and the screen locked with constantly showing loading circling constantly clock and the narrowing of the battery quickly. what I've done; Hold the alt + right shift + del (twice) to restart the phone. Restarting the phone, the screen turns black (which indicates there is neither power or the screen itself issue and it's just a matter of graphics functionality). The phone restarts you black screen, the phone clearly charged the software couple received messages (indicating the phone works and the network also works). The phone rings again and the touchpad works if you know by heart, keyboard and the short keys for speed dial works (which means that yo can call), but the screen turned black. I think it's graphic material rather software number. I tried to do all sorts of stuff and things, did not work. Finally, I decided to restore the Blackberry software (running the latest version 7.1) so I plugged it in to the computer and run terminal BlackBerry Desktop to perform an update failed with this error: "an error occurred when downloading the BlackBerry® Desktop software. Please try again. "and offered to launch the"regsvr32 ole32.dll"in order to connect to the Blackberry server to do the update. tried, restarted my PC, plug the unit again removing battery, replacement and tried again, keep showing the same error. I tried all the advice forums, youtube videos and even troubleshooting I contacted Microsoft (running windows 7 64-bit), server connection module installed and works perfectly still having the same problem.

    I hope that blackberry had a clear answer to these questions and have someone in the customer service who can solve the problem instead referring users to the forum!

    Anyone who had experienced the same problem and found a solution, please respond. your help would be much appreciated.

    Thank you.

    The GPU is integrated into the cpu, so the phone would not ring or the touchpad does not work. It is possible that the phone fell or anything that could cause the connections on the motherboard to disconnect, I gave up my 9930 and causes the connector unplugs. Would you feel comfortable taking apart? It's easy, I think you could look up how do on YouTube. I could help you if you are on Central time or Pacific.

  • Turn off the blackBerry smartphone Bold 9000 password?

    I made the mistake of turning on the password on my 9000 "BOLD" last week.  It took a weekend to decide the security is not worth the pain it causes trying to use my phone for simple tasks.

    So I went back to tools-> Options-> Security Options system and tried disabling "Content Protection."  Activation of this feature, that's what works the password in the first place then it seemed a logical way to Undo my mistake. No luck.

    Can someone give me a hand with this?  My "BOLD" is not defined on any company BES server that I know.

    Options > Security > General settings.

    According to the release of the OS you're on (you don't say), it might be Options > password.

    What is your operating system loaded on your device?
    Look at the Options > about, third line down, starting with a 'v.4.xxx '.
    What is yours?

  • BlackBerry Bold 9900 of Smartphones with the MEP 0 left tent code. Blocked network

    Hello

    I have BB bold 9900 I want to unlock to another service provider. The number of MEP code is up to 0 tests (long story why that happened). I understand that service providers are unbale to unlock and this because it is possible that now by RIM.

    Who do I contact in order to unlock the network stuck in idle.

    Thank you very much

    David

    Hello and welcome to the community!

    Please see this thread useful to start:

    If you have exhausted all your chances to enter the correct unlock code, is there nothing more, that you can do. Even if you happen to have the right code now, it is useless. Only the factory can now (legally) unlock your BB. In general, I've heard that the cost of having BlackBerry do this for you will be higher than the cost of just buying a new. But, you are able to ask them... see here:

    Note, however, that this process will begin with a tax...

    If you obtained your unlock code from somewhere, but it was incorrect, that your remedy could be with them - however, they may well wonder why you exhausted all 10 attempts before contacting them.

    If your BB was already locked MEP and you got it from a source that represents as that can be unlocked, then your recourse would be with the seller that you got it.

    Good luck!

  • Turn off the blackBerry Smartphones wireless synchronization of AddressBook

    Hello

    Using Desktop Manager to sync. Sort address book wireless synchronization has been enabled. I want to turn it off again. It's supposed to be in the help, but all he tells me is that I can it turn on or off. Any suggestions would be helpful.

    LewisCC

    Access your address book, press the Blackberry menu button and select Options.

    Select your address book that you no longer want to synchronize wireless and turn off wireless sync.

  • BlackBerry bold 9900 broken smartphones

    I've had my blackberry "BOLD" for about 8 weeks now. I went shopping yesterday and put my laptop in my bag in hand, he had a bumper case. When I went to take my phone out of my bag in hand to use, the screen was cracked. Its still in full working condition and did not have any other brand on it.  I don't think it should have happened after 8 weeks to have and I don't think it's irrational or foolhardy to put a cell phone in a bag in hand, so im thinking that it may be due a fault in the screen. his o2 of ith on contract and do not know what to do with nxt. It will still be under warranty?

    I don't really have an exact figure. But it should be around $ 100

    You can go through everything according to your convenience.

  • Turning off blackBerry bold 9900 touchscreen Smartphones

    Hi, when on a call to the touch screen to my ear keeps put the call on hold and numbering of another person. 5 times over 10 companies today ask so not professional. I'm afraid I'm going to jump the next time. Please tell me how to disable the touch screen. Thank you

    In native mode on the phone, you can't disable the touch screen.  Fortunately, there are 3rd party apps that will do it for you.  Take a look at TalkLock, one of the most popular:

    http://appworld.BlackBerry.com/WebStore/content/97159/

    The app is very well discussed in BlackBerry World and it's free.

    See you soon.

  • Turn off the Blackberry at startup

    How can I disable Blackberry initially upwards.  I am running Vista on a laptop computer XPS from Dell.  When I start, it takes forever for Blackberry screen appears on the desktop.  I would stop loading at first upward and keep the program usable when I need, not whenever I start the pc.  Thank you.

    Jeff

    Look into the Options of your Blackberry software or rt click the icon in the bar tasks for this device, for the different options

  • BlackBerry Bold 9900 New Smartphones - Blackberry app world icon disappeared from the phone?

    A weird, but I just noticed my icon of world Blackberry app has disappeared from my phone.  It appears as an installed application, but there is no way to find it and run it.  I know that was a problem last year with another phone, I'm surprised if its still a bug?   I know there was a recent update to the world of the app and I backed up my phone.

    Clues?

    In the section using your phone, there is a link to the mobile site to download (or, in your case, re-upload) app world. Just type "app World" in the search bar on your phone and you should see the article.

    If re - download App World doesn't work, then I suggest to connect your blackberry to a computer and the re - download this way. I found that, as a general rule, when an icon that is not hidden disappeared it is best to remove the application your phone completely and then reinstall it.

  • BlackBerry Bold 9900 - touchscreen smartphones does not not or answer

    Hi, I face the same problem on my 9900 5 days old. The screen touch everything just stopped working on day 2 & it has developed since then.

    I tried the following to correct the problem, but without success:

    1 cold Reboot (battery Pull when the device is powered)

    2. simple reboot (battery Pull when the device is OFF)

    3 remove the battery then, SIM & SD card plug battery and then pull it again & everything put in

    None of them have worked, my version of the OS is v7.0.0.261 Bundle 1346 platform 5.0.0.464 should update my phone software? Whenever I try to check for an upgrade it says that you have the latest being.

    Kind regards

    Jayant

    Return the appliance to the store and warranty claim. You can try to update/reinstall OS device. But I think that a 5 day old device should not produce this program.

Maybe you are looking for

  • Need to connect MacPro to the router

    My Mac Pro is now connected to the internet via the airport card and the modem is down. But I need to connect a router on a mac so I can run my laserprinter through a network using a RJ45 cable. I can't run the cable in the area of the modem is locat

  • Suddenly, I can not open a new tab. Why is this?

    I can't click more to open a new tab. When I right click and choose new tab nothing happens. What is going on?

  • Update iOS 9 and wifi

    I've updated my 5 c this morning and now I am unable to connect to the wifi.  Always connect to the internet using cellular data but not wifi connection.  Help?

  • BlackBerry smartphones need help to get my 9800 Smartphone will start normally

    My Black Berry Torch Smartphone stard with this message: Eception reception: java.lang. Execption error then Uncought: registry of applications. wait as the time-out (0xf405d42294c6940e) and eventually App error 603 so I can't access options. How can

  • BlackBerry smartphones how update you this storm? never had a BB before...

    Hey everybody! I decided to go out and order a new storm after a day frist that they came out for her come back 3 hours later because of problems I had with it.  I decided to try a another BB and just curious what do you do to improve?  You connect t